730497aaa1
Make use of ligatures in language_kana_utf8.h
10 years ago
3240d89f7d
Logic cleanup in utf_mapper.
10 years ago
2f3c77b751
Fix decimal places in G29 Bed Equation Coeficients
10 years ago
96f8d20f2f
Change selection logic another time
...
Automatic selection was to unflexible.
Updated documentation
Updated language files to new logic and documentation.
Updated bdf2u8g.exe
10 years ago
76da32b567
add hash-bang for python3
10 years ago
2e7ba44633
some renaming for readability
10 years ago
352aa3f4c5
Merge branch 'Development' into marlin_configurator
...
Latest upstream
10 years ago
e3ca9137b5
Fix missing temp_error declarations
...
- Fix for #1591 replacing #1595
10 years ago
0620267ebb
g29 auto-mode for the new G29 LRFB
...
short:
this script scans the first few lines from a gcode. If the line between 2 different z are greater than min_g1 this is our first layer. On this layer we search the min and max values of X and Y. With an offset we write that in a new file.
10 years ago
08694339eb
Merge branch 'Development' into marlin_configurator
...
Conflicts:
Marlin/Configuration.h
10 years ago
e4d77a6313
Merge pull request #1554 from 2PrintBeta/Development
...
Macro indirection for stepper drivers + Support for TMC26X and L6470 Stepper Drivers
10 years ago
b373826428
Merge pull request #2 from MarlinFirmware/Development
...
update
10 years ago
5bafb1fe1f
Add user test to language_test.h and make it default.
...
Improve description in Configuration.h
10 years ago
c0b6075f77
Fix max acceleration limits in planner
...
The max acceleration limiting was in wrong place.
10 years ago
9157cbd8f3
Add Travel Acceleration and change the M204 options
...
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).
It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves
I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
10 years ago
888cf161bd
fix travel speed option for G29
...
I forgot to enclousure the variable with #ifdef
10 years ago
af63b54562
Add travel speed option to G29 command line
10 years ago
817751d4b9
Added new languages, the Cyrillic display and a test language to find out your hardware.
10 years ago
c4b0087f7a
Insert utf_mapper.h
...
Top -> down
- Decide what output function is to use.
- Precautions. If non of the DISPLAY_CHARSET_HD44780's is selected fall back to Japanese.
- When we are not on the dogms setup a mapping table depending on display type and mapper.
- If we are on dogm we use ONE To ONE mapping - except kanji.
- select and define one of the mapping functions.
10 years ago
b60761bcff
Removed some messages that shouldn't be translated in the Japanese files.
...
And made falback to kana work.
10 years ago
97ae3c5c6a
Corected some errors inrtoduced by a faild global replacement.
10 years ago
ae76b1e8a8
Changes in dogm_lcd_implementation.h in detail.
...
Top -> down
- We don't need the old Marlion_font package any more - we made new.
- But we need information about configured fonts and the mappers.
- We support Cyrillic now.
- LCD_CLASS is not used in this file. LiquidCrystalRus.h is deleted anyway.
- define some fonts
- BIG_EDIT_FONT works only together with western languages.
- Select a matching FONT for the MENUE depending on the defined language.
- Number the different font-types. Wanted to avoid to store complete font-structures when changing fonts back and forth.
- Marlin special symbols are now at the lower end - like in 'ultralcd_implementation_hitachi_HD44780.h'
- insert the new remembering setFont function.
- insert the new counting lcd_print functions.
- make use of the new setFont and lcd_print functions.
- On some places redefined one character long strings with chars to avoid overhead and reduce warnings.
10 years ago
5bf42066fa
Fix typo in configuration.h
10 years ago
8a4b62d081
Set more regular setup in configuration.h
10 years ago
255ca68123
Changes in ultralcd_implementation_hitachi_HD44780.h in detail
...
Top -> down:
We don't need LiquidCrystalRus.cpp and LiquidCrystalRus.h any more. Functionality is now in utf_mapper.h
Comment on LCD_STR_BEDTEMP about behaviour in strings.
Change LCD_STR_ARROW_RIGHT from "\x7E" to ">" because "\x7E" is only ARROW_RIGHT on displays with DISPLAY_CHARSET_HD44780_JAPAN.
Introduce the counting UTF8 enabled lcd_print functions.
Replace the old lcd.print functions and make use of them.
A bit of reformatting around the changes.
10 years ago
60ceca1bc1
Add speed configuration for home-bumping movement
10 years ago
6fc2ccd568
Make use of new remenbering fontswitch.
10 years ago
0f26f3abf2
Add a test_language.
...
Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."
10 years ago
901cf203fe
Add legal stuff to marlin_kanji.h
10 years ago
2d5134b0ed
Introduce - clean - prepae language files
10 years ago
d813090d90
Merge remote-tracking branch 'remotes/upstream/Development' into Development
...
Conflicts:
Marlin/Marlin_main.cpp
Marlin/stepper.cpp
10 years ago
c321c97f35
Merge pull request #1584 from galexander1/stringcleanup
...
fix a handful of cases where strtod() was cast to int, instead of just using strtol()
10 years ago
53abc5e2f1
Merge branch 'Development' into delta_auto_bed_level
10 years ago
956fb2d278
Merge pull request #1 from MarlinFirmware/Development
...
update
10 years ago
978dadf806
Base64 decode AJAX-fetched text properly
10 years ago
0eae9c24bc
Merge pull request #1582 from galexander1/deltaconftypo
...
fix typo in delta example config introduced in commit 697ee2d
10 years ago
624f23f550
Merge pull request #1575 from Wurstnase/fix-controllerFan
...
Fix controller fan
10 years ago
424c747fb3
Enable M401 and M402 for deltas with allen key z-probes.
10 years ago
0d593ab7c1
Fix debug message
10 years ago
3e8c5678f5
fix bug where, i.e., "G1X1E1" would be interpretted as "G1 X10 E1",
...
because strtod() will read the E address value as if it was a base 10
exponent.
10 years ago
ed7874b4e0
M404 should not use 'N' address as parameter because 'N' is reserved for the line number
10 years ago
b9dfa5cad4
use code_value_long() instead of (int)code_value()
10 years ago
901b03d020
use strtol() instead of strtod() when an integer value is desired
10 years ago
4fba7b084f
fix typo in delta example config introduced in
...
commit 697ee2dc50
10 years ago
cfc6a3a87a
Filament Runout Sensor Feature
...
With this change a mechanical or optical switch may be used to check the
availability of the filament and when the filament runs out an M600
(filament change) command is issued. This is only done while printing
with an SD card.
This feature was requested several times (issue #679 ), but the requests
were not accepted since it was believed that this situation should be
handled at host side. However during an SD print the control is totally
on firmware and I think that during an SD print it should be handled by
the firmware.
The original code was posted at reprap forum
(http://forums.reprap.org/read.php?1,297350 ) by Lazymonk. I have only
corrected some bugs of the code and improved it by adding definitions to
the configuration.h in order to make it more standardized.
10 years ago
e6862700af
Add Z_RAISE_AFTER_PROBING to all config files
10 years ago
39d255608d
Test an extra delta configuration with auto bed leveling code paths
10 years ago
7c24b97958
Ported over Johann Rocholl's improvements for delta printers:
...
- Nonlinear auto bed leveling code (includes G29, G30, Z_RAISE_AFTER_PROBING). Cleaned it up to be a delta-specific AUTO_BED_LEVELING_GRID code path.
- Allen key z-probe deployment and retraction code. Cleaned it up and added safety checks.
10 years ago
a5342c942e
Update Marlin_main.cpp
10 years ago
0f3b7d5575
Update annotated configurations
...
- Also update base configs
10 years ago
c5aa56bc4d
Merge branch 'Development' into marlin_configurator
...
Latest upstream commits
10 years ago
d085725c86
More sanity-checking for ABL
...
- Moved sanity-checks to Marlin_main.cpp
- Applied to other configuration files
- Fixed formatting of ABL output
- Passing verbose level to probe_pt
- Miscellaneous cleanup
- Put CONFIG_STEPPERS_TOSHIBA into Configuration.h
10 years ago
8b6766b37b
Merge branch 'Development' into marlin_configurator
...
Latest upstream changes
10 years ago
9eed8c8cf0
Make sure a ROM is selected for ULTRA_LCD
10 years ago
7136268273
Added 'dogm_font_data_6x10_marlin_Kanji.h'
...
This is copied from http://www.thingiverse.com/thing:664397
// Japanese Original font
// Version 0.1 by ichibey
//
// 営利目的で利用する際は、かならず許可を得てください。非営利の場合は、CCライセンスに従い使用ください。
// http://creativecommons.org/licenses/by-nc/2.1/jp/legalcode
This font is very special. It uses a mixture of katakana an kanji symbols, uses multi character symbols and is only addressable by '\xxx' sequences.
10 years ago
16e173e167
Added 5 new font.h files to main directory.
...
The former place of 'dogm_font_data_6x9_marlin.h' was in 'dogm_font_data_m0arlin.h'.
Deleted 'dogm_font_data_marlin.h'.
10 years ago
254970c92a
Merge pull request #1570 from C-o-r-E/escape_fix
...
Fixes gCode handling of comments and escaped characters
10 years ago
25dc79f124
Remove M48 credits also
10 years ago
34e51f576f
Fix compile error in gcode_G29
...
- A redo of #1576 , which missed topo_flag
- Always set verbose_level
10 years ago
b14270b029
Added font tools
10 years ago
fe2bd237d5
Add font sources.
...
Fonts have been created with fony.exe (http://hukka.ncn.fi/?fony )
The HD44760_? fonts simulate the fonts of the character based displays.
The ISO10646 fonts provide the right size of the standard fonts.
Marlin_symbols contains only the the special symbols of the original marlin font.
10 years ago
344a12bd10
Merge pull request #1571 from AnHardt/Undubble
...
Undubble MSG_MIN & MSG MAX
10 years ago
1149c24b86
More grouping, cleanup, start on overrides
10 years ago
62bd734612
fix controllerFan() for inverted enable pins
...
add ```^ !(n_ENABLE_ON)``` for each stepper
10 years ago
3024f6c706
Undubble MSG_MIN &MSG MAX
10 years ago
63b62d8d4e
Fixed in-line comments and escaping
...
* "G1 X1 ; test" was not executing "G1 X1" due to never leaving comment mode.
* "M117 Hello \;)" printed "Hello \" to the display due to not replacing serial_char properly.
Tested with the following commands:
* M117 Hello ; test => displays "Hello" on display, ignores "test"
* G1 X1 ; foo => moves 1mm in X, ignores "foo"
* ; test => completely ignored, not even acknowledged
* M117 Hello \;) => displays "Hello ;)" on display
* M117 Hello \\;) => displays "Hello \" on display, ignores ")"
10 years ago
99fb1bc3e8
Attempt to resolve #1568 and add basic escape character support
10 years ago
fad14ae7eb
Merge branch 'Development' into marlin_configurator
...
Latest upstream changes
10 years ago
cdc38aa783
Move gcode handlers into inline functions
10 years ago
6d9e9a6bef
Merge branch 'Development' into enhanced_g29
...
Latest upstream changes
10 years ago
4db2179f5c
Include 4th extruder support
10 years ago
f90a947e65
Fix autoretract
...
Autoretract was broken, looks like it was overlooked when the retracted flag was updated for multi extruders.
10 years ago
2ef6b3d57a
Fix wrong defines, broken syntax
10 years ago
08b722b635
Merge pull request #1555 from C-o-r-E/solenoids
...
Add support for solenoid articulated extruders
10 years ago
32744d41a9
Do sanity checking on LRFB values
...
- Setting boundaries based on configured limits, contrasting with G28
(which forgets these limits?)
10 years ago
0a7d85c20e
Minor fixes
10 years ago
48e3a97a18
Removed extra encoder definitions from pins_FELIX2.h
10 years ago
d052a3c6aa
Merge pull request #1551 from thinkyhead/redundant_encrot
...
Cleanup rotary encoder encrot* defines
10 years ago
d8eeddfb93
Updated DUAL Extruder config, added README and enabled NEWPANEL by default
10 years ago
b423b90c77
Added Configuration_adv.h to examples for LCD/SD Support
10 years ago
075507fb9a
missed one X_ENABLE_PIN
10 years ago
dfb38874f8
Some suggested changes for #1555
10 years ago
7f8ea7105f
Arrange ProbeAction values bitwise
10 years ago
7684721977
Enhanced G29
...
- Adapted “Enhanced G29” code referred to in #1499 and posted at
[3dprintboard.com](http://3dprintboard.com/showthread.php?3105-Auto_Bed_
Leveling-Enhanced-G29-command)
- Compatible with current G29 while adding some new arguments
- `V` sets the verbose level for serial out
- `T` (or `V` > 2) send a Topology report to serial out
- `E` works the same way as before
- `P` works as before (source used `n` or `U`/`u`)
- `L`, `R`, `B`, `F` work as before
- Still needs sanity checking for `LRBF`
10 years ago
874d3d3fc5
Add support for solenoid articulated extruders
10 years ago
7540a81106
Minor fixes
10 years ago
a375d648c7
Merge remote-tracking branch 'upstream/Development' into Development
10 years ago
4a7aca2736
Merge remote-tracking branch 'remotes/upstream/Development' into Development
10 years ago
715104e477
Fix Endstop check for CoreXY bots.
...
The X_Axis could not home to min while Y_Max endstop was trigged.
10 years ago
e428e8da75
Merge pull request #1552 from thinkyhead/cleanup_cardreader
...
Cleanup of cardreader.*
10 years ago
20e59dc61e
Don't skip files starting with underscores
10 years ago
f171656f8e
Cleanup of cardreader.*
...
- Apply standards to cardreader.*
- Fix minor issues with cardreader.cpp
- Apply standards to some other stale regions
10 years ago
f379edca78
Cleanup rotary encoder encrot* defines
...
The encrot values are used in only one place, and don’t vary, so remove
redundant references.
10 years ago
c7cdb176c8
Merge branch 'Development' into marlin_configurator
...
Latest upstream changes
10 years ago
49f471a5fc
Merge pull request #1541 from thinkyhead/fixup_temperature
...
Cleanup of temperature code
10 years ago
f2710e11d1
Optimize initial loading, code cleanup
10 years ago
558c6313f7
Merge branch 'pr-felix' into Marlix
10 years ago
08bc723a3c
Enable PIDBED
10 years ago
e487bd642b
Updated PR to streamline integration
10 years ago
2eeb241b42
Find fields that group together
...
- Do field grouping
- Tweak configurations for better grouping
10 years ago
e30bfedce4
Fix undefined *_PROBE_BED_POSITION error
10 years ago
3eafea840d
Minor fixes in Configuration.h
10 years ago
c7fb1b70f2
Initial Configuration.h for Felix 2.0/3.0
10 years ago
2e172f38bd
Added support for Felix 2.0/3.0 printers
10 years ago
f994729999
Parse and use dependent groups
...
- Parse #if, #ifdef, etc. for rules to enable fields
10 years ago
9b50ec6512
Panel One encoder pins
10 years ago
838a22de64
Fix switch value method, make app global
10 years ago
8d5839151b
Merge branch 'Development' into marlin_configurator
...
Latest upstream changes
10 years ago
443e7edef4
- Add support for L6470 Drivers.
...
- Both TMC, L6470 and pin-driven drivers work.
- All can be mixed and matched as needed.
10 years ago
1db02c2891
Merge branch 'Development' into fixup_temperature
...
Merge upstream changes
10 years ago
a99470fbb0
Merge pull request #1527 from maverikou/panel_one
...
Added support for PanelOne from T3P3.
10 years ago
5727cb3ed4
Cleanup TMC Stepper a bit.
10 years ago
a5bbd402bf
Merge pull request #1539 from AnHardt/dummysensor
...
Extend the idea of dummy temperature sensors.
10 years ago
1a7b0d9a37
Redo HAS_* macros to fix define error
10 years ago
864dddc878
Macros to the top, a few HAS_* macros
10 years ago
227ab8c665
Merge pull request #1503 from MarcelMo/patch-2
...
Support for simple customisable AutoZProbing area
10 years ago
fd1ea9d56f
Move literal strings to language files
10 years ago
8742b6bd56
Merge branch 'Development' into panel_one
10 years ago
aa9c1f1bed
Better name for ADC macro
10 years ago
9c9726d469
Cleanup of temperature code
...
- Reduce calls to millis()
- General cleanup of manage_heaters
- General cleanup of pid autotune
- Formatting here & there
- Macros to clean up and shrink ISR code (reduced by ~364 lines)
10 years ago
c6d2ebe452
Extend the idea of dummy temperature sensors.
...
Added a second sensor and made them configurable.
10 years ago
c9a3eb0c1a
Spacing in calculate_volumetric_multiplier(s)
10 years ago
2af559cca3
Shared function for menu_edit_* and menu_edit_callback_*
10 years ago
df8c51528f
Merge branch 'Development' into cleanup_ultralcd
...
Latest upstream changes
10 years ago
517f411999
Spacing adjustment to menu_edit* macro
10 years ago
4938ae5caf
Add required backslash for macro expansion
10 years ago
e182cdebf9
Add required backslash for macro expansion
10 years ago
fa4c36df68
Fix menu callback issue wrt LCD_CLICKED
10 years ago
0cf0c20532
Optimize calculate_volumetric_multiplier
10 years ago
38500165ea
First attempt at adding TMC Driver support. May need some cleanup.
10 years ago
b55995aae8
Introduce a layer of macro indirection to all stepper pins. This allows other stepper drivers to redefine them, so they can use SPI/I2C instead of direct pin manipulation.
10 years ago
8ccdac9898
Enable PID debugging for heated bed
10 years ago
29097b0ab2
Enable PID debugging for heated bed
10 years ago
21bd4fd6db
Enable PID debugging for heated bed
10 years ago
fb56aad898
Enable PID debugging for heated bed
10 years ago
08c543f8fb
Enable PID debugging for heated bed
10 years ago
c89413db1e
Enable PID debugging for heated bed
10 years ago
1c71e4751a
Enable PID debugging for heated bed
10 years ago
a9e15aa503
Updated example configurations
10 years ago
3ba47ea277
Remove test/demo multi=line code menu items
10 years ago
c1240f23dd
Merge branch 'Development' into marlin_configurator
...
Latest upstream changes
10 years ago
a57869ba49
Dummy Thermistor Table for testing purposes
...
Am I the only one who always need to change the thermistortable.h to add
a dummy table??
Ok, it is done. Just set the thermistor to 999 and it will always read
25C. Great for Testing or Development purposes.
10 years ago
2e166f5337
Added support for PanelOne from T3P3.
10 years ago
40ef472a25
Merge in encoder multiplier
10 years ago
1c13cd604b
Formatting in babysteps defines
10 years ago
3a26804d80
Adapt to latest PID code and fix typos
10 years ago
422582da71
Prep formatting for upcoming PR
10 years ago
27ac3e985d
Add options to example_configurations
10 years ago
0d6a7a2df0
Merge with latest upstream changes
10 years ago
c7a97e18b7
Merge branch 'Development' into cleanup_ultralcd
...
Latest upstream changes
10 years ago
6d5c13df74
Merge pull request #1520 from thinkyhead/fixup_temperature
...
Fix typos in checkExtruderAutoFans
10 years ago
5b9e341222
Merge pull request #1516 from thinkyhead/fixup_ramps
...
Cleanup ramps boards
10 years ago
57bc28b42c
Cleanup and fix ultralcd.cpp
...
- Fix bug in lcd_control_temperature_menu
- Remove test menu-item left in from multi-line command feature
- Replace literals with translatable strings
- Reduce lcd_preheat code redundancy
- Reduce menu macro redundancy
- Clean up formatting
10 years ago
4fcd4b444e
Merge pull request #1519 from thinkyhead/fix_recent_issues
...
Fix implementation of PID menu items
10 years ago
9c35ed149d
Merge pull request #1508 from AnHardt/iss1492
...
Fix iss#1492
10 years ago
430c4b6538
Replace missing backslash
10 years ago
3aa5f98b64
Download all as ZIP, adjust layout on resize
10 years ago
a8939eec28
Readability of MENU_MULTIPLIER_ITEM
...
Last commit before bed.
10 years ago
09e09b308e
Tweaky spacing adjustments
10 years ago
e3fd3e8fa4
Fix typos in checkExtruderAutoFans
10 years ago
c610471b0c
Add PID_PARAMS_PER_EXTRUDER conditional
10 years ago
2d6fa9ce80
Proper implementation of PID menu items
...
- Make this work per #1344
10 years ago
b8e79dce89
Fix compilation errors when encoder multiplier is disabled
10 years ago
65e1fc71be
Add encoder rate multiplier
10 years ago
859c8d3fef
Azteeg X3 overrides too
10 years ago
7891eacf21
Merge branch 'Development' into fixup_ramps_boards
...
- Also apply cleanup for #1514
10 years ago
1600506545
Merge remote-tracking branch 'upstream/Development' into marlin_configurator
10 years ago
5d0c93ae10
Keep config boxes in view on wide screen
10 years ago
335b7680c9
Tooltip code, widescreen layout, hide auto-expands
...
Slightly better layout for wide screens.
10 years ago
15b73386b5
Add pin definitions for the Boards BAM&DICE + BAM&DICE Due
10 years ago
08c236059e
Merge pull request #1505 from thinkyhead/issue_1499
...
Bed leveling probe behavior issue?
10 years ago
f238c7428d
Merge branch 'Development' into marlin_configurator
...
Latest upstream changes
10 years ago
da275c72ab
Cleanup Github reply.data.content before atob()
10 years ago
159196d1e9
Reset Alert message when finish M600 command
10 years ago
266ff227cf
Merge pull request #1510 from docdawning/Development
...
Trivial spelling correction
10 years ago
dfd4e74a5c
Trivial spelling correction
10 years ago
6cdcd6c6d1
Fix iss#1492
...
Introduced lcd_strlen() and lcd_strlen_P().
Replaced the old functions where necessary.
Reworked language_ru.h.
Speeded up test for zero length string in cardreader.cpp
10 years ago
c033904693
Updated config file section markers
10 years ago
84a87a5b1c
Fix up configs a little
10 years ago
63a5ff7ab9
Merge pull request #1489 from tommil/Development
...
Updated Finnish language file
10 years ago
efb0491d40
Merge branch 'Development' into issue_1499
...
Merging latest upstream changes
10 years ago
8309b4f408
Merge branch 'Development' into marlin_configurator
...
Merging latest upstream changes
10 years ago
961998cf91
Merge pull request #1496 from thinkyhead/issue_1493
...
Megatronics 3 servo pins
10 years ago
b71322e793
Issue #1504 – K8200 Z_ENABLE_PIN
...
- K8200 uses a non-standard RAMPS with Z_ENABLE=63 ??
- Assuming from previous input that 3DRAG is the same.
10 years ago
978d114c73
Bed leveling probe behavior issue?
...
The `float` keyword should not be on these vars because they conceal
the outer vars, preventing them from obtaining known values before
being passed in `set_bed_level_equation_3pts`. Possibly related to
`Z_RAISE_BETWEEN_PROBING` not functioning.
10 years ago
7c6236761a
Merge branch 'Development' into issue_1493
...
Merging latest upstream changes
10 years ago
9875352dd8
Merge branch 'Development' into marlin_configurator
...
Merging latest upstream changes
10 years ago
d28f5b9e82
Support for simple customisable AutoZProbing area
...
When probing PCB´s I had the problem that i needed auto-leveling for specific areas (it´s never the same size).
Not much code, but very useful.
Now I use simply G29 L5 R55 F5 B35 P3 to probe a 4x6cm PCB before milling.
I used int for values... might be wrong...
I hope this time I got the right development tree. (tried first with https://github.com/MarlinFirmware/Marlin/pull/1130/commits )
10 years ago
513ff94b89
Merge remote-tracking branch 'upstream/Development' into Development
10 years ago
83cb702e72
Config sections, multi-field values, toggles, etc
...
- Auto-detect “switchable” items where possible
- Handle switchable multi-value fields
- Add standard sections to config form
- Add section markers to configurations
- Add value options to configurations
- Remove and re-add fields for loaded configs
- Preserve sections across configs
- Preserve non-added fields
- Style added fields wider & newline by default
10 years ago
afc737ca0c
Fix CoreXY Homing Routine.
...
Fixed how stepper ISR figure it out when the head (extruder) is going to
Min or Max direction.
Added Homing to Max Endstops.
10 years ago
ec53c6309a
More fields, options in config, fix tooltips
10 years ago
68184af57b
Merge branch 'Development' into marlin_configurator
...
Latest upstream commits
10 years ago
7866fa161f
Merge pull request #1476 from Natealus/Development
...
Compiling errors with 4 Extruders defined and Viki 2 Implementation
10 years ago
ea9e49b20d
ARRAY_BY_EXTRUDERS 4th hotend PID parameters
10 years ago
d0ad8a978c
Megatronics 3 servo pins
...
- Naive implementation, assuming the data sheet pin numbers correspond
to Arduino pin numbers.
10 years ago
e74138b2be
More robust fetch code, download buttons
...
- Fetch code now handles github, local, or http: access
- Download button creates a time-stamped inline download
- More complete error messages
- Show warnings when approaching the hourly fetch quota (limit
reloading!)
- Added my test domain (where the _htaccess is deployed)
- `_htaccess` file added to set Access-Control-Allow-Origin “*”
- Marlin logo with css
- Limit selectable areas to avoid annoying selections
- Messages now persist until dismissed
- Default repo for files set to thinkyhead, ‘marlin_configurator’ branch
- Cosmetic changes
10 years ago
622a531d9c
Fixed error in translation
10 years ago
290ab42d22
Updated Finnish translations
10 years ago
22a7985445
reverted to upstream
10 years ago
b3bda57ca2
reverted to upstream
10 years ago
9d75a56b56
Merge remote-tracking branch 'upstream/Development' into Development
...
Conflicts:
Marlin/Configuration.h
Marlin/Marlin_main.cpp
10 years ago
0a59fee763
Merge remote-tracking branch 'upstream/Development' into Development
10 years ago
eb5889b3da
Merge pull request #1479 from AnHardt/en_first
...
#include "language_en.h" before the national language in language.h
10 years ago
b9ed873827
Enable PID debugging for heated bed
10 years ago
0a19109476
Enable PID debugging for heated bed
10 years ago
a4f939cc27
Updated Finnish language file
10 years ago
32d4dd073f
Merge pull request #1487 from AnHardt/iss1485
...
Fix for #1485
10 years ago
c246026bda
Sorry.
10 years ago
07e488cfae
Fix for #1485
10 years ago
e7ecf14d0c
Update ultralcd_st7920_u8glib_rrd.h
...
Fixed delay-times during Init. REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER won't get initialized on some Boards because delay was to short.
10 years ago
52c3cf6d34
Fix a logging error
10 years ago
ba24a09f24
Use api.github to get Configurations
...
- Make api.github the default source for configurations
- Remove configurations from the configurator
- Continuation and enhancements
10 years ago
f4b0a40abb
Additional fixes to temperature.cpp and found another missing line
...
Looks like INVERT_E3_DIR was missing in the configuration.h also as I
did a test compile with 4 extruders and Azteeg X3 Pro defined. So I also
added those lines too. Additional formatting to make the comments line
up better in that section.
10 years ago
3aac2df057
Now the oter way around.
...
Include of language_en.h now behind national language.
All "#define MSG_STR_*" now surrounded by #ifndef and #endif.
10 years ago
488633bf44
#include "language_en.h" before the national language in language.h
...
+ May decrease the workload for feature developers. They may omit to
update all the language files but "language_en.h". When loading _en
first, all new features give some display, but the new in English.
- May throw some additional warnings about redefinition during compile.
10 years ago
8e92729141
Make display language configurable in Configuration.h
10 years ago
38a500d05c
Viki 2 Implementation
...
I've insert the define and pointer entries for the Viki 2 and miniViki
from Panucatt in all of the example configs and main config. With these
additions and with pins done in the old single pin.h style...I was able
to get the display working fine save for needing to turn Delta Segments
per Second down. But that's a common graphics lcd issue being looked
into right now.
I need assistance in understanding how the new divided pins files fit
together because my previous attempts at trying to get it to work
appropriately didn't seem successful. This originally came from trying
to find out how to swap the XYZ Min and Max Endstop pins in the Azteeg
X3 Pro. It only comes with one set of connectors and they're Min
Endstops. My previous experience didn't turn out well trying to tell the
firmware to home to the Min Endstops so the best solution I found was to
swap the pins in the firmware. If I'm missing a conflict with a setup
other than delta please let me know, but it makes sense in my setup.
10 years ago
697ee2dc50
Compiling errors with 4 Extruders defined
...
Here were a few changes that I had to make/add lines for the 4th hotend.
A compiling problem in the Temperature.cpp and missing lines in
configuration.h and configuration_adv.h. I added these lines in all of
the example configs too.
10 years ago
85e5aa4011
Generalized enqueue_commands_P, and moved them to Marlin_main as they should
10 years ago
4228758f1d
Clean up and improve tooltips, show the name
10 years ago
0116320d2c
Strip slashes off the front of tooltips
10 years ago
69240d41b0
Offset the timing of the pulsing animation
10 years ago
78b9428f4e
Avoid capturing disabled items in comments
10 years ago
5d159851e5
Fix positioning of tooltip
10 years ago
c99f1de9f3
Fix tooltips blocking clicks
10 years ago
1a548c1bc1
Find nearby comments and make them into tooltips
10 years ago
90fa1345b0
Fix purge + refresh of define info
10 years ago
aa67b38a44
Fan speed and 4th extruder on graphical LCD
...
- Display fan speed 0-1 as “—“ and 254-255 as “100%”.
- Display 4th extruder instead of the heated bed
10 years ago
7850ae2f4f
Merge branch 'Development' into marlin_configurator
...
Merge latest Development
10 years ago
2647402095
Use info.repl in updateDefineFromField, fix regex
10 years ago
12a3975341
Close section tag, add String.prototype.lineCount
10 years ago
4bb72f9480
Highlight the edited line
...
- Add a span to the edited text line to provide a highlight
- Scroll and highlight for switch checkboxes also
- Clean up initialization
- More API documentation
- Smarter handling of asynchronous file loading during init
10 years ago
37c43a7ab3
Scroll to reveal on switches as well
10 years ago
9c0adae3cd
Scroll to setting position in file when edited
...
- Animate scrolling to the edited item’s position
- Sanity check file drops and show warnings
- Fix form init / refresh on new configuration drop
- Document the API methods that get/set defines
10 years ago
4d341bb758
Copy configs into subfolder
...
Browsers may not want to load files outside the folder, but they may be
okay with these relative references within the folder.
10 years ago
72856166a9
Fix bad typo in ConfigurationStore.cpp
10 years ago
b51204cc1c
Add fieldsets and make them into tabs
10 years ago
56769ba4f8
Make comment/uncomment a little neater
10 years ago
94bebf31ac
Pre-collect info about options on field init
...
- When initializing fields use the configuration to determine the format
- Cache the line for each option for fastest string compare / replace
- Add logging levels for debugging
10 years ago
32aaadc301
Include minimized jQuery 2.1.3
10 years ago
53f6bbdfe0
Try a stepper for the serial port
10 years ago
ac7a4358d6
Add a responsive file uploader
...
- Specify HTML5
- Allow drag and drop for loading configurations
10 years ago
09a385d9b0
Add "use strict" to the top.
10 years ago
b2627200ea
Get thermistors from config, add temp sensors
10 years ago
ef18bfdd3f
An in-place browser-based configurator utility
...
- A web form with fields for configuration values
- Reads and parses standard config files
- Modifies configurations dynamically in-place
10 years ago
3490a19103
Merge pull request #1466 from CONSULitAS/Development_K8200_de
...
K8200: Example Configuration.h fixed
10 years ago
cfbb94a2a8
K8200: Example Configuration.h fixed
...
Example Configuration.h: fixed strange white characters preventing
compilation in lines 1 and 3 - oops
10 years ago
b65c5d8ec6
Merge pull request #1464 from AnHardt/iss1448-Menu
...
Unified menu selection - by hilighting - made first column avilable
10 years ago
0de5083aff
K8200: Example Configurations readme.md updated
...
Example Configurations for K8200 readme.md updated
* readme.md: added description for german umlaut support on LCD
10 years ago
c421ffd520
K8200: Example Configuration_adv.h back in sync
...
Example Configuration_adv.h for K8200 back in sync
* Configuration_adv.h: rebased and added missing changes for 4th
extruder
10 years ago
0575dd10de
K8200: Example Configuration.h back in sync
...
Example Configuration.h for K8200 back in sync
* Configuration.h: rebased and added missing changes
* Configuration.h: updated comments for K8200
10 years ago
f708884808
Introduced new function lcd_implementation_mark_as_selected()
...
New function now drops the prechar (select character) and makes the first
column usable for text.
Marking the line is now constantly made by highlighting (reverse).
Replaced selection code in:
lcd_implementation_drawmenu_generic()
_drawmenu_setting_edit_generic()
_drawmenu_sd()
with new function.
10 years ago
b6ca50a2cc
Merge pull request #1463 from thinkyhead/cleanup_recent_merge
...
Apply some cleanup for recent merge
10 years ago
cc56f36870
Merge pull request #1461 from thinkyhead/issue_1453_redo
...
Apply fix for M600 filament change
10 years ago
8663f4bbaf
Apply some cleanup for recent merge
...
Combine 1/(rows+1) with u8g.getHeight() to get rowHeight and just use
that.
10 years ago
0cb1029311
remove extra plan_buffer_line
10 years ago
9381bfe7f9
Fixes issue #1447 - Overlapping of long descriptions with values.
10 years ago
b97a950f53
Apply fix for M600 filament change
...
- Patch from #1453 for delta movement plan
- Fix: Set X with code X instead of adding to X
10 years ago
2abf1ad940
Distribute recent changes in Configuration.h to the examples.
10 years ago
33f8580255
Merge branch 'lcd-width' into b-
10 years ago
0c24bb6cfc
Adjust LCD_WIDTH to make better use of DOGM LCDs
10 years ago
b1dbd765c6
Centralise definition of fonts for DOGM displays
...
Prework for issue #1448 and #1447
Will merge in when pull request #1457 is in.
10 years ago
65642592ee
Added dualline version.
10 years ago
f9cc1df00b
Droped URL from bootsplash.
10 years ago
c20606b8d7
Replaced some literal constants with defines
...
Replaced calculation to centre bitmap with fixed values.
Saved 20 bytes.
10 years ago
3602474c25
Replace solitaire use of u8g_font_5x8 font and replace with u8g_font_6x10_marlin
...
and win another 1694 bytes.
10 years ago
f5fd94d62a
Kick suspicious loop an win 72 bytes.
...
No visible impact.
10 years ago
b3973ed224
Fix HD44780 misspelled as HD44870
10 years ago
d8b7f29fa2
Merge pull request #1452 from thinkyhead/fix_M200_bug
...
M200 cleanup, normalization of EXTRUDER loops
10 years ago
6d81968db5
Merge pull request #1450 from docdawning/Development
...
Normalized section headers, added some headers, added help URLs for newb...
10 years ago
5bb3933b21
Fixed n00bsauce
10 years ago
d109cd940b
Normalized all configuration files to include my new section headers and the like.
10 years ago
055c4beaf9
Normalized section headers, added some headers, added help URLs for newbies
10 years ago
9dc5de6166
Hide code that makes veteran geeks go "aha!"
10 years ago
bd387068bb
Apply loops for extruders elsewhere also
10 years ago
4a146d584b
Loop, since the pending feature can use an array
10 years ago
bca884bf72
Realized it's not a bug, but cleanup code anyway
10 years ago
2dd43a82b1
Ups. #else added
10 years ago
26e55471f8
Update example configurations.
10 years ago
85385be132
Removed now automatic define of DISPLAY_CHARSET_DOGM + improved description.
10 years ago
0e40408ee5
Make exemplaric use of new display charsets in language_en.h and languag_de.h
10 years ago
8dce5a6644
Improve new charset featur.
...
Select DOGM-displays automaticly.
Give hint where to find charsets.
Add '²' and '³' characters.
10 years ago
c009c81e65
make marlin-main the default
10 years ago
f4ebc02555
marlin url
10 years ago
0af9a0bf57
url to firmware downloads
10 years ago
5f8dd92905
toss in a fix for .ru
10 years ago
3f3ad9b3ad
typo
10 years ago
07639053fb
Add support for BQ Prusa i3 "Hephestos"
10 years ago
fb7c636ecf
Avoid compiling error
...
Only a missing ","... now it will compile again
10 years ago
787d6fb61a
Update RUMBA pins file
...
Add FAN1_PIN and SERVO0_PIN
10 years ago
5fd5105d44
Merge pull request #1439 from clefranc/Development
...
Fix nozzle in temperature menu
10 years ago
76bf93efcb
Revert "get STR_THERMOMETER from ultralcd_implementation_hitachi_HD44780.h"
...
This reverts commit 4d5b0e2037
10 years ago
4d5b0e2037
get STR_THERMOMETER from ultralcd_implementation_hitachi_HD44780.h
10 years ago
33408a4dfc
Update ultralcd.cpp
...
Fix number of nozzle displayed in temperature menu.
10 years ago
6e6e3cf443
merged https://github.com/MarlinFirmware/Marlin.git
10 years ago
b3ca430a20
Inducted the defined placeholders in the translation table.
10 years ago
e045034c3f
Included Configuration.h to read the defined charsets.
...
Defined the charsets plus a default.
10 years ago
27c638803e
Defined three charsets.
10 years ago
073c59c50a
Clean up some formatting
...
- Also partial cleanup of Marlin_main.cpp with a smidgen of Doxygen.
10 years ago
9a4d4b3a2f
translated Deltamenu
10 years ago
8aa6487b4b
MSG_ENDSTOP_ABORT = 'Endstop abort' > 'Endstop Abbr. Ein'
10 years ago
666ad7106b
Translated redundand: define MSG_INIT_SDCARD and MSG_CNG_SDCARD
10 years ago
e5c45fbe8c
Infoscreen messages end with a '.' if not to long.
...
MSG_NO_MOVE = 'Kein Zug.' > 'Motoren Eingesch.' hat mich grau Haare gekostet.
Die englisch Meldung will sagen - Du kannst jetz am Extruder arbeiten, die
Achsen sind bockiert, die Motoren sperren die Achsen weil sie unter Strom
stehen, weil sie eingeschaltet sind.
10 years ago
1e22137e27
MSG_STOP_PRINT = 'Druck stoppen' > 'SD-Druck Abbruch'
...
to work out that this can't be resumed.
10 years ago
05d2ebd118
MSG_WATCH > 'Beobachten' > 'Info'
10 years ago
06cba91c39
eye candy 2
10 years ago
9352c9547f
MSG_SPEED = 'Geschw' > 'Geschw.'
10 years ago
0dfb0162f3
eye candy.
10 years ago
7222b27501
MSG_MOVE_AXIS = 'Achsen bewegen' > 'Bewegen'. Is Extruder an axis?
10 years ago
a6f808c9b1
remove unused #define MSG_RETRACT
10 years ago
152fa579f5
MSG_SWITCH_PS_OFF = 'Switch Power Off' -> 'Netzteil Aus'
10 years ago
7a32b742f3
MSG_SWITCH_PS_ON = 'Switch Power On' ->'Netzteil Ein'
10 years ago
4e176d2ce8
MSG_SET_ORIGIN = 'Setze Nullpunkt' ->'Setze Null hier'
10 years ago
1f8c8ad3ed
MSG_SET_HOME_OFFSETS = 'Set home offsets' ->'Setze Home hier'
10 years ago
0e8836ce5e
MSG_AUTO_HOME = 'Auto Nullpunkt' ->'Home'
10 years ago
56d3e6615d
MSG_DISABLE_STEPPERS = 'Stepper abschalt.' -> 'Motoren Aus'#
10 years ago
1258980832
Merge pull request #1429 from bq/Development
...
Add bq Witbox 3D printer
10 years ago
766762a4dc
Change url link
10 years ago
7df9ca051c
Merge pull request #1428 from thinkyhead/issue_1388_eeprom
...
Make EEPROM storage consistent
10 years ago
fe3810f073
yeah, what he said
10 years ago
6137bbd484
use eeprom read correctly
10 years ago
9bc9051405
Flag EEPROM write errors on serial output
...
- Also adds a language string for the error.
- Also adds SERIAL_EOL as an alias for SERIAL_ECHOLN(“”)
10 years ago
ff99ca3040
Fix alignment of Restore following PIDTEMP
...
Should be reading 4 x 4 PID values instead of 4 x 3
10 years ago
6c285930cb
Fixing wrong pin to heater extruder 2 <-> 3
...
Extruder 2 and 3 was swapped
10 years ago
0d4ce27b79
Add pins_WITBOX file
10 years ago
13118cde33
Add bq Witbox 3D printer
10 years ago
093fedfde8
Make EEPROM storage consistent
...
Update ConfigurationStore to always write dummy values for disabled
options, including FWRETRACT, DELTA, and SCARA. Update the EEPROM
version to “V15.” Also fixes a buffer overrun with axis_scaling in
Config_ResetDefault.
10 years ago
34377ee512
Merge pull request #1427 from thinkyhead/fewer_preheat_strings
...
Remove language strings that only add a number
10 years ago
7378a7fef4
Merge pull request #1408 from thinkyhead/cleanup_servo
...
Formatting cleanup of quiet sources
10 years ago
5fbef6bed2
Merge pull request #1409 from thinkyhead/rename_lastnr
...
Rename lastnr to autostart_index and...
10 years ago
53eea611b8
Fix MSG_NOZZLE
10 years ago
d7211a5324
Changes for Portuguese too
10 years ago
0a21727c0a
Portuguese (pt) and Brazilian Portuguese (pt-br)
10 years ago
c90f2e77d8
Remove language strings that only add a number
...
This won’t reduce the string storage in the end, but it makes the
language files smaller. Also removed remaining unused strings.
10 years ago
2ce4a102ee
Add support for Megatronics 3 a la #1426
10 years ago
ae4b348d77
Make sure _Ex_PINS is defined
...
Also fix analogInputToDigitalPin so it uses proper C hex notation
10 years ago
80be6f3f91
tweak tweak
10 years ago
ebe78cb36f
tweak
10 years ago
82474fef8a
Max endstop pins disabled by configuration
...
There’s no need to ask users to uncomment Max Endstop pins when they
have them. These will be set to -1 later if the endstop option is
disabled.
10 years ago
8045e4d60d
Add support for 4th extruder
...
#1405 includes some changes to pins.h for a 4th extruder. This commit
applies those changes. It also deals with a possible problem with
SENSITIVE_PINS.
10 years ago
df4f3e7712
cleanup
10 years ago
b6ecbd8cc4
cleanup
10 years ago
4e573134de
Cleanup heading
10 years ago
574a5ab72a
Split up pins to make it more manageable
...
Hopefully this is helpful to organization and future expansion….
10 years ago
d55c62bf9f
Update ConfigurationStore.cpp
...
Moved #endif to allow filament settings to print.
10 years ago
e779641c73
Update ConfigurationStore.cpp
...
Added PIDTEMP dummy write to align EEPROM read/write operation.
10 years ago
baac6e242d
Merge pull request #1419 from AnHardt/bootsplash
...
repair Bootsplash
10 years ago
75cf302da3
example configurations changed to meet Configuration.h
10 years ago
61fd45a0c2
Add 4th extruder
10 years ago
AnHardt