f37ed314e0
Friendly layout for Arduino IDE
7 years ago
65996e4235
Support file updates
7 years ago
d5e5735679
Support travis new "trusty" build environment
...
move from legacy precise to trusty build image
fix PATH not including buildroot/bin
remove symolic link to ~/bin as trusty travis image doesn't include it in PATH anyway
7 years ago
8f5a576b08
pristine != precise ( #7424 )
7 years ago
419e575808
Force legacy "pristine" build dist for TravisCI
...
TravisCI "trusty" build dist isn't picking up build path causing travis checks to fail. Reverting to legacy "pristine" dist while we investigate
7 years ago
d2fb3215da
PlatformIO Travis test
...
spi.h renamed to avoid conflicts with base libraries
7 years ago
f3e562e46e
HAL for 32-bit Teensy (3.5, 3.6) architecture
7 years ago
fb04dfcda8
Apply Travis update workaround while a permanent solution is found
7 years ago
5851c2d36f
MAX7219 followup ( #7564 )
...
* Add MAX7219_DEBUG to Travis CI testing
* Tweak config and use standard pin naming for MAX7219_DEBUG
* MAX7219: Apply coding standards, use macros, etc.
* Make code work...
7 years ago
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
7 years ago
e9c72978c7
Implement SERVO_DELAY as array
...
This modify give SERVO_DELAY x servo basis
7 years ago
622048ffb0
Clean up whitespace, trailing space, bad tab conversion, etc.
7 years ago
65a36948c0
Support travis new build environment ( #7425 )
...
move from legacy precise to trusty build image
fix PATH not including buildroot/bin
remove symolic link to ~/bin
enable sudo
trusty travis image doesn't source ~/bin by default
avr requires sude
7 years ago
c6509076c4
Force legacy "precise" build dist for TravisCI ( #7422 )
...
TravisCI "trusty" build dist isn't picking up build path causing travis checks to fail. Reverting to legacy "precise" dist while we investigate
pristine != precise
7 years ago
283d15a8d0
Add a Travis CI test for FWRETRACT
7 years ago
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
...
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
7 years ago
11c589c3ec
Fix compile issue with G38
...
Fixes #7250
7 years ago
fc140c4962
Followup for I2C_POSITION_ENCODERS
7 years ago
3c7bfe798d
Various cleanups ahead of digipot save
8 years ago
80a232419d
CNC workspace planes and 'P' argument for G2/G3
8 years ago
e907654d6a
Do two or three fewer test builds
8 years ago
0c616700f3
Merge pull request #7097 from thinkyhead/bf_dac_percents_fix
...
Convert DAC percent to uint8_t
8 years ago
a1c65fd3d5
convert DAC percent to uint8_t
...
=====================
add test to Travis
8 years ago
dd1a84b23f
Add Travis test for scrolling on DOGM
8 years ago
570722a0fe
Combine Travis tests to shorten required time
8 years ago
0bc66bf22c
PCA9632 PWM color LED support
...
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
8 years ago
74d6dee920
User Command (Script) Menu
...
The menu (commands / scripts) is configurable in `Configuration_adv.h`.
- Added conditionals.
- Changed script handling.
- Slimmed and working!
- Added Status message.
- Returning to lcd status screen now!
- Example Configs Updated.
- Cleanups by @thinkyhead
8 years ago
13a06711ad
Add a Travis test for UBL + DELTA
8 years ago
6854f08d22
Shut down autotemp in disable_all_heaters
8 years ago
de569e3d4e
Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes
...
M43 Toggle & Z servo test - fix bug & add another check
8 years ago
4067d15c92
Cleanup, extend TMC2130 implementation
8 years ago
1acb84ba02
fix 1 bug, add error messages
...
===============================================
make changes requested by reviewers
===============================================
add M43 test to Travis, fix EOL, remove trailing spaces
8 years ago
40dfafbe89
Add Travis CI test for FLSUN config
8 years ago
5135be14ea
Include Travis CI tests for 5 extruders / e-steppers
8 years ago
f81b518a03
Add Travis tests for optional M100 features
8 years ago
73e193da1d
Implement LCD_BED_LEVELING for PROBE_MANUALLY
8 years ago
fcadc7bb1a
Implement the "manual" option for ABL
8 years ago
342ee458ae
Additional UBL fixes, optimizations
8 years ago
edbc024d76
Disable UBL_G26_MESH_EDITING by default
8 years ago
786fe2ba2a
Include PARK_HEAD_ON_PAUSE in Travis testing
8 years ago
fba22652fc
Add UBL testing to Travis
8 years ago
45f949d833
TMC2130 Library: @teemuatlut replaces @makertum
8 years ago
c5e08e8761
CoreYX/YZ/ZX needs different endstop logic than CoreXY/YZ/XZ
...
In the endstop testing section, add the "reverse" logic in addition to "normal" core handling.
In CoreXY/YZ/XZ steppers rotating the same direction gives X movement. Opposing directions produces Y movement.
In CoreYX/ZY/ZX this is reversed. Same = Y, Opposite = X.
----
Fixes the issue where the Y endstop was being checked when moving in the X direction, etc.
8 years ago
a561bd5e3a
New feature: SDCARD_SORT_ALPHA
8 years ago
76f47aebb6
Travis test TMC2130 options
8 years ago
c8d4cd35d8
Include more features in Travis testing
8 years ago
ea0dbee3c9
Enable ABL by type, support bilinear on cartesian
8 years ago
0c951436e4
Extend SCARA test, stress-test ABL_GRID_POINTS_*
8 years ago
ed759626fe
Arduino 1.6.10, direct download U8glib in Travis CI
8 years ago
d63b8e2b2b
Additional details for I2C_SLAVE_ADDRESS
8 years ago
e3efb04295
Shoehorn EXPERIMENTAL_I2CBUS into Travis test
8 years ago
85c4d5d2b5
Include DELTA_CALIBRATION_MENU in DELTA travis test
8 years ago
1f239ac9a7
Extend travis test to check MAX6675
8 years ago
49f75b7891
pins_RAMPS_14.h => pins_RAMPS.h
8 years ago
6b8b458106
Travis for ABL+SCARA, Z_MIN_PROBE_REPEATABILITY_TEST
8 years ago
0149fc189a
Update travis config so NOZZLE_CLEAN_FEATURE no longer depends on AUTO_BED_LEVELING_FEATURE
8 years ago
5cdd6f02ec
Update travis config not to send email notifications
8 years ago
9730a9355c
Travis test for Mixing and Switching extruders
8 years ago
c711701626
Implements a nozzle parking command (G27)
8 years ago
b05a75655a
Implements a nozzle cleaning pattern generator (G12)
8 years ago
43ff0ce35f
Rewritten FILAMENT_CHANGE_ENABLE feature
8 years ago
b77069de01
Add a Travis test for LCD_INFO_MENU
8 years ago
bd01592816
Goodbye MECHANICAL_PROBE
9 years ago
bd99a2bcff
Add a Travis test of Z Safe Homing without ABL
9 years ago
528df1b02d
Travis test for MINIRAMBO and PWM_MOTOR_CURRENT
9 years ago
6563b07879
Test for mechanical and fix mounted probes
9 years ago
42ccb5b0df
Travis test a servo probe without ABL
9 years ago
e189f6a842
Patch Travis test for bed leveling
9 years ago
47ce810f52
Remove support for XY servo endstops
9 years ago
587de1b6b6
Merge pull request #3676 from thinkyhead/rc_lin_advance_feature
...
Advance extrusion algorithm – LIN_ADVANCE
9 years ago
9a1dfd0f5f
Fix Travis test for FILAMENTCHANGEENABLE
9 years ago
9b3a0895fd
Upgrades travis Arduino IDE version to 1.6.9
9 years ago
45b701d38c
Travis test for LIN_ADVANCE
9 years ago
4a212f707b
Merge pull request #3993 from jbrazio/feature/update-travis
...
Update travis to test for ULTRA and DOG LCD options
9 years ago
d13c86f6f6
Adds travis test for SPEAKER
9 years ago
24e70c915d
Update travis to test for ULTRA and DOG LCD options
9 years ago
38279a02b2
Travis tests for Inch, Fahrenheit, Kelvin, M100
9 years ago
f69b5afe4c
Travis CI test for MBL
9 years ago
08b485a310
Travis will now generate and use the custom version header file
9 years ago
07c9a11c3c
Automatically set X2 stepper pins
9 years ago
7527fdec0b
Add Travis test for DUAL_X_CARRIAGE
9 years ago
3016dfe484
Merge pull request #3744 from thinkyhead/rc_bezier_curves
...
Add BEZIER_CURVE_SUPPORT — G5 command
9 years ago
ddac17a195
Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ)
9 years ago
a878c09614
Cleanup of the buildroot
9 years ago
85e732d5fd
Fix BABYSTEPPING, add it to Travis test
9 years ago
484de24e22
Updated travis to test for PRINTCOUNTER
9 years ago
ad61a8684a
Comments for legibility, test DEBUG_LEVELING
9 years ago
1a79b13b7a
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
9 years ago
1cd1ccbf86
Enable/disable multiple options on a single line.
9 years ago
ff272c7b69
Improve Travis CI test
...
- Add shell scripts to help with managing configs
- Clean up .travis.yml file by using shell scripts
- Don’t download “astyle” – not needed and delays Travis results
9 years ago
b39b54031b
Fix KEEPALIVE_STATE
...
Add return to NOT_BUSY for M105
Replace WAIT_FOR_USER with PAUSED_FOR_USER
Add Travis test for FILAMENTCHANGEENABLE
9 years ago
eda95d8bed
Add support for LCM1602 16x2 I2C LCD adapter
9 years ago
25d1c94fa8
Add SDSUPPORT test to TRAVIS
9 years ago
cf792fd8d8
Update configurations to use RAMPS 1.4
9 years ago
6dfc7124a1
Add Travis check for ALLEN_KEY (PR#2748)
...
Tests DELTA, AUTO_BED_LEVELING_FEATURE and ALLEN_KEY
9 years ago
56a6d85c41
Add (disabled) style test
9 years ago
8d23c4230e
Add a Travis test for Z_DUAL_STEPPER_DRIVERS and Z_DUAL_ENDSTOPS (PR#68)
9 years ago
c39dc2908f
New test for servos in Travis (PR#2565)
9 years ago
4e14e152fa
Add Travis tests for CORXY and COREXZ
9 years ago
2c1414f81f
Reactivate tests for more extruders in Travis (PR#2348)
...
BOARD_ULTIMAKER was not the default any more
- sed failed to change the board
- RAMPS_EFB has no second extruder
- ...
- Added test for bed
Rebased.
10 years ago
Scott Lahteine