Scott Lahteine
91bd6eade7
X_DUAL_STEPPER_DRIVERS configuration option
9 years ago
Scott Lahteine
928ff6487a
Greek language pack from @psavva
9 years ago
Scott Lahteine
182c8d7f8f
Dyze High Temp Thermistor Support
9 years ago
Scott Lahteine
1026e5b071
Replace PLA/ABS preheating with generic
9 years ago
Petr Zahradnik
e282d69f63
Print job timer comment changed
9 years ago
AnHardt
4b44a23a36
Add TX-buffer for MarlinSerial
...
Similar to the current Arduino HardwareSerial
but with max. 256 byte buffer-size.
Deactivated by default.
The boards with AT90USB processor (USBCON) already use a TX-buffer.
9 years ago
AnHardt
a129078927
Add an emergency-command parser to MarlinSerial (supporting M108)
...
Add an emergency-command parser to MarlinSerial's RX interrupt.
The parser tries to find and execute M108,M112,M410 before the commands disappear in the RX-buffer.
To avoid false positives for M117, comments and commands followed by filenames (M23, M28, M30, M32, M33) are filtered.
This enables Marlin to receive and react on the Emergency command at all times - regardless of whether the buffers are full or not. It remains to convince hosts to send the commands. To inform the hosts about the new feature a new entry in the M115-report was made. "`EMERGENCY_CODES:M112,M108,M410;`".
The parser is fast. It only ever needs two switch decisions and one assignment of the new state for every character.
One problem remains. If the host has sent an incomplete line before sending an emergency command the emergency command could be omitted when the parser is in `state_IGNORE`.
In that case the host should send "\ncommand\n"
Also introduces M108 to break the waiting for the heaters in M109, M190 and M303.
Rename `cancel_heatup` to `wait_for_heatup` to better see the purpose.
9 years ago
Petr Zahradnik
43ff0ce35f
Rewritten FILAMENT_CHANGE_ENABLE feature
9 years ago
Anthony Birkett
7a377c1d75
Add "About Printer" information menu.
...
Includes:
*firmware version / branch / date.
*extruder count
*board information (name, serial details, power supply type)
*thermistors (names, min/max temperatures)
*printer statistics (PRINTCOUNTER details)
Thanks to @thinkyhead for contributions.
9 years ago
Scott Lahteine
f84d85f761
Cleanup extruder runout configs
9 years ago
Scott Lahteine
683975cf90
Fix spelling in a config comment
9 years ago
Scott Lahteine
10da7ac86c
Combine Z raise before/after options
9 years ago
Scott Lahteine
03c70c1990
SERVO_DEACTIVATION_DELAY => SERVO_DELAY
9 years ago
Scott Lahteine
bd01592816
Goodbye MECHANICAL_PROBE
9 years ago
Scott Lahteine
b590a7dee0
Make Z_RAISE_BETWEEN_PROBINGS a more general option
9 years ago
Scott Lahteine
d50539583a
Make XY_PROBE_SPEED a general probe option
9 years ago
Scott Lahteine
2798499b71
XY_TRAVEL_SPEED => XY_PROBE_SPEED
9 years ago
Scott Lahteine
b0e47608e6
Merge pull request #4108 from esenapaj/Fix-for-PR-#4093
...
Fix for PR #4093 (Make Z Probe options independent of ABL), etc
9 years ago
Scott Lahteine
40cd20a236
Fix comments on EXPERIMENTAL_I2CBUS
9 years ago
esenapaj
d583ea852d
Standardize format description of Panel
9 years ago
esenapaj
aa6d35bd49
Move code block of probe to appropriate position
9 years ago
esenapaj
740fb2ce39
Adjust spacing
9 years ago
Scott Lahteine
19fe93a5a9
Clean up configs for Z_MIN_PROBE_REPEATABILITY_TEST
9 years ago
Scott Lahteine
3996242e9d
Allow Z_MIN_PROBE_REPEATABILITY_TEST solo
9 years ago
Scott Lahteine
9beb3f2f5e
Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup
...
FIL_RUNOUT_INVERTING false by default
9 years ago
Scott Lahteine
f215b30932
Merge pull request #4093 from thinkyhead/rc_probe_without_abl
...
Make Z Probe options independent of ABL
9 years ago
Scott Lahteine
dfbf8b3c2c
FIL_RUNOUT_INVERTING false by default
9 years ago
Scott Lahteine
de12228758
Make Z Probe options independent of ABL
9 years ago
Scott Lahteine
f8c278ce4d
Cartesio UI display option in all configs
9 years ago
Scott Lahteine
bd4ec727e7
Merge pull request #4066 from thinkyhead/rc_M851_with_probe
...
Make M851 standard with a bed probe
9 years ago
Scott Lahteine
eab44b30d4
Safety and serial sections
9 years ago
Scott Lahteine
fc56a547d1
Rename movement section to motion
9 years ago
Scott Lahteine
1000563d80
Make M851 standard with a bed probe
9 years ago
Scott Lahteine
47ce810f52
Remove support for XY servo endstops
9 years ago
Scott Lahteine
d991a4c24a
Merge pull request #4063 from thinkyhead/rc_remove_swp_files
...
Delete mysterious .swp files from #3609
9 years ago
Scott Lahteine
ebbed2975e
Delete mysterious .swp files from #3609
9 years ago
Scott Lahteine
02e5dad29a
Include Croatian in language listings
9 years ago
Scott Lahteine
f639044c24
Merge pull request #3609 from jbrazio/feature/config-version
...
Adds versioning for Configuration.h & Configuration_adv.h
9 years ago
esenapaj
741cda0e47
Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE)
...
・Update forgotten example configurations
9 years ago
João Brázio
8ccd97e7cc
Updated all example configuration files
9 years ago
Reid Rankin
16212432c9
G20/21 and M149 support, and code_value() refactor
...
This is an update of MarlinDev PR #196 .
G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.
In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
9 years ago
Scott Lahteine
cd441ce652
SINGLENOZZLE: EXTRUDERS versus HOTENDS
9 years ago
Scott Lahteine
db0fd021d0
Z raise options independent of ABL so G28 can use them
9 years ago
Scott Lahteine
28fb1f8994
Tweak #endif comment for ABL GRID
9 years ago
Scott Lahteine
a0b000d752
Support for SAV_3DGLCD OLED LCD controller
9 years ago
Edward Patel
06593833ff
MBL: Move border macros to Configuration_adv.h
9 years ago
Edward Patel
92a27c37b3
MBL: Apply https://github.com/MarlinFirmware/Marlin/pull/3903 to example_configurations
9 years ago
Scott Lahteine
fe3122774a
Merge pull request #3806 from thinkyhead/rc_coreyz_support
...
Support for COREYZ. Fixes for COREXY, COREXZ
9 years ago
Scott Lahteine
89e630b2fb
Merge pull request #3808 from thinkyhead/rc_singlenozzle
...
SINGLENOZZLE
9 years ago
Scott Lahteine
95fee8ca81
Add option for CoreYZ kinematics
9 years ago
Scott Lahteine
c5130fd23b
Additional instructions for controller reverse options
9 years ago
Scott Lahteine
69abfef82e
Add "SINGLENOZZLE" extruder option
9 years ago
Scott Lahteine
1a6c72cb57
Apply to the rest of the configs
9 years ago
Scott Lahteine
8218558953
Update comments, rename next_ping_ms, followup to #3797
9 years ago
Scott Lahteine
07c9a11c3c
Automatically set X2 stepper pins
9 years ago
Scott Lahteine
3016dfe484
Merge pull request #3744 from thinkyhead/rc_bezier_curves
...
Add BEZIER_CURVE_SUPPORT — G5 command
9 years ago
João Brázio
f9a62f6a8e
Added PRINTJOB_TIMER_AUTOSTART section to example config files
9 years ago
Scott Lahteine
ddac17a195
Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ)
9 years ago
Scott Lahteine
9f6b8f7d5b
Remove extra @section directive from configs
9 years ago
Scott Lahteine
f13c4a9ec4
Merge pull request #3720 from jbrazio/feature/host-keepalive
...
Removes the DISABLE from HOST_KEEPALIVE
9 years ago
AnHardt
b74af78736
Make arc support (G2/G3) configurable
...
Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)
9 years ago
Scott Lahteine
14cd0f4c92
Merge pull request #3740 from thinkyhead/rc_lcd_home_options
...
Individual Axis Homing LCD menu items
9 years ago
João Brázio
09150cae79
Individual Axis Homing LCD menu items
9 years ago
Scott Lahteine
4dc4e2063f
Add REVERSE_ENCODER_DIRECTION option
9 years ago
João Brázio
85b2c80838
Updated example configurations
9 years ago
João Brázio
5373ac6373
Updated example configurations
9 years ago
esenapaj
212b17d510
Fix for PR #3526(Configuration.h LCD & SDCard s...
...
Fix for PR #3526(Configuration.h LCD & SDCard section rewrite)
It removes duplicated BQ_LCD_SMART_CONTROLLER.
9 years ago
esenapaj
2fa4bc344c
Some clean-up for example configuration files
...
Some clean-up for example configuration files
Follow-up and fix the PR #3253(Make the Autotune item(s) in the LCD menu optional):
・Update forgotten file(Felix/Configuration_DUAL.h)
Follow-up the PR #3526(Configuration.h LCD & SDCard section rewrite):
・Add section of RigidBot Panel to RepRapWorld/Megatronics/Configuration.h
Follow-up the PR #3576(Z Safe Homing for all):
・Adjust spacing
Follow-up and fix the PR #3625(Print job statistics):
・Update forgotten file(Felix/Configuration_DUAL.h)
・Remove ambiguous character "f" in top of RigidBot/Configuration.h
9 years ago
Scott Lahteine
fbf69081b4
Updated comment for THERMAL_PROTECTION_BED
9 years ago
gralco
908229dbb3
Introduce temp watch protection for the bed
...
When setting the bed temp via M140/M190 if the thermistor does not read an increase of WATCH_BED_TEMP_INCREASE degrees by WATCH_BED_TEMP_PERIOD seconds then it will throw "Error:Heating failed, system stopped! Heater_ID: bed" and call the kill() function.
Conflicts:
Marlin/Configuration_adv.h
9 years ago
Scott Lahteine
c3ef9993b9
Merge pull request #3625 from jbrazio/feature/print-counter
...
Print job statistics
9 years ago
João Brázio
e34f4653ef
Fixed a typo on the configuration files
9 years ago
João Brázio
27088e356f
Updated example configuration files
9 years ago
Scott Lahteine
924285afa6
Merge pull request #3641 from thinkyhead/rc_reverse_menu_doc
...
Correct the REVERSE_MENU_DIRECTION comment
9 years ago
Scott Lahteine
f1b00eb12b
Correct the REVERSE_MENU_DIRECTION comment
9 years ago
Scott Lahteine
0c11566f42
Replace LANGUAGE_INCLUDE with LCD_LANGUAGE
9 years ago
Scott Lahteine
259794c0be
Make DISPLAY_CHARSET_HD44780 a single setting
9 years ago
João Brázio
7de0161204
Updated example config files
9 years ago
Scott Lahteine
0c2aa92b07
Z Safe Homing for all
...
The `Z_SAFE_HOMING` feature is coupled with probes and not leveling, so
make it available for general use.
9 years ago
Scott Lahteine
339b5b3e34
Patch more configs with new changes
9 years ago
Scott Lahteine
a8e4d7c135
Merge pull request #3477 from alephobjects/BedTempHysteresis
...
Implementation of M190 bed temp hysteresis
9 years ago
Scott Lahteine
1cc622b167
Fix minor spelling in comments
9 years ago
Scott Lahteine
de8c0baf8b
Update some comments in Configuration.h
9 years ago
gralco
69c00aea4c
Include bed hysteresis setting in the example configs
9 years ago
Scott Lahteine
f8e10ff1d8
Merge pull request #3491 from thinkyhead/rc_mechanical_probe
...
Support for "mechanical probe" with Allen Key as a special case
9 years ago
Scott Lahteine
7eb476597f
Update some comments in Configuration.h
9 years ago
esenapaj
2eb1b102f8
Support for "mechanical probe" with Allen Key as a special case
9 years ago
Scott Lahteine
fe0fe184aa
Replace some tabs with spaces
9 years ago
Scott Lahteine
50c3140040
Merge pull request #3414 from thinkyhead/rc_host_timeout_mods
...
Host Keepalive configurable timeout with 2s default
9 years ago
jbrazio
dd3a06a95a
Implemented M155 and M156, a generic TWI/I2C interface for Marlin
9 years ago
Scott Lahteine
2eca8d63b3
Add DEFAULT_KEEPALIVE_INTERVAL setting
9 years ago
Scott Lahteine
868eebfdee
Simplify configuration of Z2 endstops
9 years ago
Scott Lahteine
e5771346a4
Drop DISABLE_M(IN|AX)_ENDSTOPS, replace with individual endstop flags
9 years ago
Scott Lahteine
ffe054c129
Fix comment about host keepalive interval
9 years ago
Scott Lahteine
1a79b13b7a
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
9 years ago
Scott Lahteine
3b2d159abd
Relax the test for "Heating failed" errors
9 years ago
Scott Lahteine
53cc6cca46
Formalize some dependencies on PIDTEMPBED
9 years ago
Scott Lahteine
5955a3063f
Sanity check PIDTEMPBED plus BED_LIMIT_SWITCHING
9 years ago
Scott Lahteine
4b31c67dce
Add PID_AUTOTUNE_MENU option
9 years ago
Scott Lahteine
e08915a723
Fix comments in Configuration_adv.h
9 years ago