bd966ef389
Update Marlin/thermistortables.h
13 years ago
775da3f103
Added top ratings and extended to ADC=1 for table 3 and 5.
13 years ago
96a4baa0be
Update Marlin/thermistortables.h
13 years ago
2aa9f7b131
Update Marlin/thermistortables.h
13 years ago
c4490f5f3d
Update Marlin/Configuration.h
13 years ago
dd9144994e
Tested May 19 - It works! Verified with separate thermocouple TM-902C also.
13 years ago
4c37d0d9f1
Extended range above 250C. (Operating range states up to 300C)
13 years ago
b59724e42b
Add strigification for extruder amount in M115 report.
13 years ago
16413bb8f2
Last M401 update, refresh the LCD during an M401 wait.
13 years ago
b3941fce5c
Update after testing
13 years ago
d494688565
Do not initialize in the header file.
13 years ago
516ec90242
Add M401 - Wait for user on LCD button press
13 years ago
7244aa7eb7
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
de2ca3b2e8
Grammar correction.
13 years ago
c2fc466e1b
Update Marlin/Configuration.h
13 years ago
241f5a4c0e
Update Marlin/thermistortables.h
13 years ago
9f9f498491
Update Marlin/Configuration.h
13 years ago
e31bef31ad
Limit PID autotune PWM to PID_MAX
13 years ago
b2a9ccdb97
Merge pull request #159 from MaikStohn/Marlin_v1
...
Marlin v1 - BUG FIXES / CORRECTIONS
13 years ago
d459fb41b7
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
13 years ago
804e0d6117
Merge pull request #164 from guanix/Marlin_v1
...
Melzi support
13 years ago
ba96059203
add additional dropsegments test
13 years ago
fbd91ab0b5
Fixes #153 for bad call to abs()
13 years ago
b51c06e2b3
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
159ae90874
bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only)
13 years ago
e48f5aa6a7
fixed typo
13 years ago
1efe9ab497
changed encoder pos from int to long to fix problems setting x/y/z/e stepps_per_mm using the lcd menu
13 years ago
602c8ee02b
Melzi support
13 years ago
279d00da9f
Fixed #if for Ultimaker.
13 years ago
451f9cc6d1
Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.
13 years ago
e3fe1f0d00
Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed.
...
Turning off the protection might be beneficial to those who want to do fast and long reversals.
13 years ago
d88205d89d
Suggestion to improve (TODO), no actual code changed
13 years ago
5aa80e6c05
Made language.h more flexible. Automatically do the right defines based on MOTHERBOARD == 7 ? "Ultimaker" : "Mendel"
13 years ago
b657a18449
Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings"
...
This reverts commit 3682d9bd5b
13 years ago
d188ae4c9d
added missing declaration of buttons_init()
...
This is required when moving the buttons_init() function to the
lcd_init() function
13 years ago
3682d9bd5b
magic PROGMEM defines to avoid hundreds of wrong GCC warnings
13 years ago
032df0b2c6
Moved LCD initialization out of constructor
...
Since the class "MainMenu" was used within a static variable the
initialization of the object (constructor call) was done before Arduino
library startup. It always caused a crash when using AVRStudio with
JTAG debugger (caused from calling the LCD initialization / the lot of
I/O work / the stack used during this calls). By moving the LCD_INIT
out of the constructor and using an explicit call inside of Arduino
setup() implementation immediately fixed all problems and the JTAG
debugger runs fine.
13 years ago
bd1ad7c76a
explicit includes to make it compile with AVRStudio/Eclipse
13 years ago
060b38de5c
delete obsolete and wrong code
...
"i" runs from 0 to 4 but "add_homeing" array size is 3 only. On the
other hand the calculated value gets overwritten by either one of the
if choice.
13 years ago
789ba02d43
fixed typo in comment
13 years ago
1874cb71a6
Added option to increase the FAN PWM frequency.
13 years ago
6a5a34e0ff
Small cleanup
13 years ago
e3821bd86f
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
13 years ago
02af69911e
Added temperature window to M109. This is needed for systems with no overshoot PID.
13 years ago
e203b8c754
Merge pull request #154 from daid/Marlin_v1
...
Added 2nd extruder temperature LCD readout and setting.
13 years ago
362ddc4efc
Merge pull request #155 from Atntias/patch-1
...
adding M120 and 121 for turning on and off the endstops only for homing
13 years ago
c27081aa4a
Fix to allow M120/M121
13 years ago
e11e072eca
adding M120 and 121 for turning on and off the endstops only for homing function
13 years ago
8e68c6cf89
Show proper temperature for extruder 2
13 years ago
8503b78876
Added support for 2nd extruder temperature to UltraLCD
13 years ago
3eacb4c16d
Wrap the call to turn off the bed heater in a #if to prevent a compile error on boards that do not have a bed heater
13 years ago
e4d2138dbd
reinitialize the lcd, if the SD card is inserted or removed. It seems that LCDs can confused by electrical discharges from time to time.
...
Since a removal or insert of the sd card takes a long time in firmware, just reinitializing the lcd does not hurt.
actually, it solves a problem with the UltiControlle
13 years ago
464b755918
added support for the UltiController
13 years ago
44fd8d46d2
fixed quickhome
13 years ago
33bb044d7c
fixed catsting to (int)e in serial error messages.
...
see https://github.com/ErikZalm/Marlin/issues/148
13 years ago
c2557abc03
Merge pull request #138 from triffid/fix-makefile
...
make should rebuild if configuration or Makefile is changed
13 years ago
67cf105bc6
Fixed AUTOTEMP (M109 S215 B260 F1 starts autotemp)
...
Changed SLOWDOWN. IF this does not work ok OLD_SLOWDOWN is the old algo.
13 years ago
8aee9d51b6
Disabled disable_heater in PID_autotune.
13 years ago
414408b2d0
Fix for wrong systax in #ifdef.
13 years ago
77d503fa13
Fix Makefile
13 years ago
cf7c8c458f
Fixed MAX6675
13 years ago
03b0850e63
This breaks temperature readout for pronterface!
13 years ago
ad8bc71d3e
- Fixed a typo
13 years ago
46feae79c6
Fixed typo in arc
13 years ago
4ca2f336f0
Changed default MINIMUM_PLANNER_SPEED -> 0.05
...
Fixed small bug in arcs
M105 prints now actual_temp/target_temp
13 years ago
ae0bf8068b
Fixed arc offset.
13 years ago
0c1b863755
Ignore ":" in comments.
13 years ago
63aec3c56e
Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.
...
Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp
13 years ago
8b785f75a6
Merge pull request #123 from buserror-uk/for-upstream
...
For upstream
13 years ago
520f1a54a8
Fix compilation error when PIDTEMP is undefined and ULTIPANEL is defined.
13 years ago
5550e893d5
New board variant, Open Motion Controller
...
Open Hardware board currently used by the group build of http://tvrrug.org.uk
The board can be found at http://solderpad.com/folknology/open-motion-controller/
Signed-off-by: Michel Pollet <buserror@gmail.com>
13 years ago
aa6e6e914e
Makefile: Redone
...
+ Removed most explicit pathnames, use the standard make "VPATH" to let
make find the files for itself.
+ Added a "hardware variant" variable that allows compiging Sanguino and
Gen7 as well as "generic" arduino.
+ Allows overriding the MOTHERBOARD define from the Makefile
+ Removed the 'preprocessor' bit that wasn't needed, now just "include" the
files that are needed, since it allows gcc to show the right file/line
when displaying error/warnings.
+ Uses gcc's own dependency generator to generate the .d files, and
and include these instead of self-patching the makefile
Signed-off-by: Michel Pollet <buserror@gmail.com>
13 years ago
0183e6332a
made prepare->autostart independent of current folder.
13 years ago
1532200435
found error in filenames.
...
One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely
13 years ago
b985e4a134
Fixed compile errors in ultralcd when no ultra_lcd is selected.
13 years ago
2e749d60c3
Added DISABLE_MAX_ENDSTOPS
13 years ago
33f5697888
PPID tune exports more constants.
13 years ago
b44055cc51
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
13 years ago
f5eae52098
Added more manage_inactivity checks
13 years ago
19a47dae4a
Merge pull request #99 from Justblair/master
...
Better pin configuration for rotary encoder in RAMPS boards
13 years ago
910f4e77a2
Added 20MHz support.
13 years ago
7cefad3744
Merge pull request #106 from bgamari/Marlin_v1
...
Make F_CPU dependence of stepper.cpp more explicit
13 years ago
87ff2f8867
Added CONTROLLERFAN. (Controlling a fan to cool down the steppper drivers)
13 years ago
387fe51a56
Do not disable steppers when there are moves in the queue.
13 years ago
421264e58a
Fixed typo
13 years ago
15ad923310
Removed !!!. Stupid arduino bootloader can't handle this.
13 years ago
61e09e6be2
Added FAN_PIN -1 checks
13 years ago
87c4e06c24
Corrected active_extruder when autotemp is used.
13 years ago
7b1e295f34
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
13 years ago
c077316b2b
Added PID autotune. (experimental)
...
M303 Starts autotune. Wait till the Kp Ki and Kd constants are printed.
Put these values in Configuration.h
13 years ago
49b228c4b3
Add instructions to regenerate speed_lookuptable when changing F_CPU
13 years ago
96509494f0
stepper: Clarify comment on timer-counter configuration
13 years ago
6d7e6a11fc
Add create_speed_lookup
13 years ago
ce07c9186d
While Waiting for hotbed to warm up via M190, LCD Display and Click Encoder input freeze until target temperature is reached.
13 years ago
116dc86b8a
Fixed type in e-jerk
13 years ago
02ee9e3d30
Changed Pin Assignment for the RAMPS motherboard so that LCD and Rotary encoder are all wired to AUX-4
...
This simplifies wiring for those with RAMPS 1.3 and 1.4 boards.
13 years ago
e056bf8081
Added E-Jerk
13 years ago
4deeffbc88
Added missing defines to the german section.
...
Translation still needed.
13 years ago
632528aa95
merging with SCUBA82
13 years ago
aac7aa3bf0
Queued fan control. Issue #90
13 years ago
fde51084f3
set SD file delete to M30; switch printime output to M31
13 years ago
21e2bae063
Changed (corrected?) SD_card comment handling.
13 years ago
e509bbf636
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
13 years ago
072011a3ef
Added current_block = NULL to quickStop()
13 years ago
2422a857a1
Merge pull request #96 from haxar/Marlin_v1
...
make analog2tempBed return a precise celsius reading for BED_USES_THERMISTOR, ...
13 years ago
f598077af3
Removed vc files
13 years ago
cb0c84e075
Merge remote-tracking branch 'justblair/master' into Marlin_v1
13 years ago
1d5809d458
Merge pull request #88 from daid/Marlin_v1
...
Made plan_buffer_line arguments const...
13 years ago
ed951b1977
Fixed RAMPS 1.2 support (Found and fixed by rrhb)
13 years ago
4879de08e8
The percent complete for the SD file statistic sits squint. Changed "lcd.Setcursor (7,2);" to "lcd.Setcursor (10,2);".
...
The percent complete now lines up with the temperatures and Z-axis position figures, nicer to read and nicer to look at IMHO.
13 years ago
f278e1c00f
This is in my opinion a much better way of dealing with SD cards than my previous fix.
...
Instead of adding a momentary switch to fake the insertion of the card I have modified the ultralcd menu item:
Card Menu -> Refresh
to reinitialise the card providing that the SDCARDDETECT pin has been set to -1 in the pins.h file. This requires one less switch on the front panel and the refresh menu item is in the most relevent place for a user who wishes to inert a card and then print from it.
It also means that the "Card inserted" messages do not bother the users of these card readers (they dont make sense for users without SCCARDDETECT)
13 years ago
046a8e0039
Added more defines to the language.h file so that nowe most of the text strings are now configured via this file. Still got some hunting down to do to complete this task.
13 years ago
79a466ca26
make analog2tempBed return a precise celsius reading for BED_USES_THERMISTOR, complementing changes to analog2temp in d15f01e
13 years ago
5f3a422e68
added M31 - delete file from sd card
13 years ago
fa2e3a40e9
fixed LCD manual z axis move Feedrate to 70 (was 1700)
13 years ago
a92b3afe64
added german translation;Menue should be in english.. sounds better
13 years ago
9fa586bbed
fixed languages; Preheat_PLA and Preheat_ABS was not defined for non
...
english
13 years ago
00d33e6b82
Typo fix
13 years ago
7d124478fa
Only protect the heater pins for the defined extruders.
...
Changed the way the extruder pins are defined so it doesn't create extra -1 entries in the list.
13 years ago
3d83109028
Fixed general 16x2 LCD build without SD support.
13 years ago
cb02914687
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
13 years ago
10bf2bb8e1
-
13 years ago
d47b666630
Merge branch 'Marlin_v1' of git://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
88d289caa1
Made plan_buffer_line arguments const, which optimizes better and fixes the RUNOUT_PREVENTION feature.
13 years ago
b4833d55c2
Fixed HOME_POS in combination with G28 X0 or G28 Y0
13 years ago
c6f2ec3c82
remove stop_heating_wait
13 years ago
b48d67ce10
Fixed homing
13 years ago
071eec7aa7
Merge pull request #81 from phord/09469add5560ca8a676c42e4bcd499868c33f0dd
...
Clean up and add some trace info
13 years ago
1ebe7d1ab6
Merge pull request #83 from phord/tempfix
...
Add explicit #define for bogus temp override
13 years ago
b65ef8d66c
Add support for upcoming Gen7 v1.4
...
V1.4 moves thermistor power to the always-on 5v line.
The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer
needed on this board. Add a new motherboard type to
support this feature.
13 years ago
740f0c7690
Add explicit #define for bogus temp override
...
The code to ignore the "bad thermistor reading failsafe"
suicide function depends on the existing of the PS_ON pin
feature. But in some boards this shouldn't be the case
Fix this by adding an explicit definition to make our
intentions more clear and separable.
13 years ago
ba8500a236
pins.h: Define Z_MAX_PIN for Gen7 board
...
The Z_MAX_PIN value was defined as no-value, but this causes
the compile to fail. Fix this by setting the Z_MAX_PIN to the
correct value (which happens to be 0 for pin PB0/DIO0/0).
13 years ago
09469add55
Add board reset reporting (from Repetier-Firmware)
13 years ago
f3101e96d9
Add suitable .gitignore to avoid build noise
13 years ago
245dca4bee
Makefile: generic pde=>cpp rule
...
This adds flexibility to the makefile by allowing different pde
targets to be specified for different needs.
13 years ago
97d42ca2b2
SDSUPPORT default disabled
13 years ago
7b14953c99
Fix build on Sanguino based boards with ATmega1284P
13 years ago
286d5003fa
Fixed compiler warning for Sanguino compile
13 years ago
66d50562b6
Merge pull request #76 from iXce/Marlin_v1
...
Fix Makefile
13 years ago
27f595a444
Changed version => RC2
13 years ago
018c567abf
Moved SLOWDOWN function. (jetty840)
...
Included AD595 calibration options. (daid)
13 years ago
4fbda5c3f5
Merge remote-tracking branch 'daid/Marlin_v1' into Test
13 years ago
ce714fe306
Fixes in pins.h
13 years ago
35e57bf149
Added gen6 deluxe.
13 years ago
84ea2d61e8
Moved gen7 boards to motherboard type 10, 11 and 12.
...
Split ramps1.3 in Sprinter like config and multiextruder config.
13 years ago
adc108d79e
Correctly build the produced applet/Marlin.cpp source
13 years ago
5aa9c41ab1
Changed comment mode for detection.
...
Added M221 extuder multiply factor.
13 years ago
00690f7ffd
Fix cast warning in Gen7
13 years ago
01d28c18ab
Fixed casting warning in sanguino
13 years ago
2fd8c248fe
Added Fan control to the pre-heat settings.
...
I find that the PID routine works better when the cooling fan is switched on
at the beginning of a warm up routine. Otherwise when you enable the fan
just before a print, you have a delay as the PIDre-adjusts.
This should also be safer as most cooling fans are directed at the hot -ends
thermal barrier!
13 years ago
d9f2f509d5
Added new menu items under the prepare submenu.
...
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
13 years ago
ae3e7586c6
Added HOME_POS. This adds the posibility to make the center 0
...
Updated the Xsteps ... settings via the LCD menu
13 years ago
df1437bd86
Changed display format for some numbers.
13 years ago
8816ef1c64
Small fixes after merge
13 years ago
d298dd121f
merged SBUBA82 and Justblair
13 years ago
2cc9a89830
Merge remote-tracking branch 'SCUBA82/Marlin_v1' into Marlin_v1
13 years ago
a0a1f81913
various changes
13 years ago
8a8ea50f33
fixed manual axis movement lcd option
13 years ago
b976692d0f
Removed VS project files for tidyness stakes
13 years ago
fe940a142d
Added a structure that will allow easy translations/modifications to the LCD menu.
...
Signed-off-by: Blair Thompson <mail@justblair.co.uk>
13 years ago
b3fb09a20c
change preheat to ABS values of nozzle 227 and be 105 C
...
next try for manual axis movement
13 years ago
a05a261b72
Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich
...
that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card
13 years ago
1b6765ed12
Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface
13 years ago
1ff99ae25f
ATMega1284P support for Arduino IDE
...
replace $ARDUINO_HOME/hardware/tools/avr/etc/arduino.conf with this file
13 years ago
e661578c84
support for GEN7 1.1,1.2 and 1.3
13 years ago
73344e69c1
Added temperature offset/gain settings for AD595.
13 years ago
d309565b56
Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1
...
Conflicts:
Marlin/Configuration.h
13 years ago
0e3631ff4b
smaller changes
13 years ago
fa2e1be0ca
changed default EXTRUDE_MINTEMP to 170.
13 years ago
7699f250e3
Fixed small merge bug
13 years ago
11518a987f
merged with triffid fork
13 years ago
13e185d330
removed unused HEATING_EARLY_FINISH_DEG_OFFSET
...
Simplified stepper inactive time
13 years ago
b58eae7657
Corrected e-length calculation in planner
13 years ago
2a77c84c8f
Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.
13 years ago
d47a3e5950
Changed check i mtion_conrol
...
if (millimeters_of_travel == 0.0) => if (millimeters_of_travel < 0.001)
(thanks mooselake)
13 years ago
f87c80889f
Fixed M109 timer overflow (reported by triffid)
13 years ago
154de69c02
Print configuration.h version during startup (thanks hairykiwi)
13 years ago
6ef8459494
Corrected distance calculation. (thanks jv4779)
13 years ago
598eb1d4f1
Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid)
13 years ago
9173a5713b
Teensylu support.
13 years ago
da040fd393
Fixed ultimaker heater 1 pins. (Thanks daid)
13 years ago
bdb70c0509
Warning for 10k thermistor
13 years ago
5113513cb2
RC 1
13 years ago
d8a0c6450f
Split the configuration file in two parts.
...
One for common settings.
One for advanced settings.
13 years ago
4cc8e37bf1
lcd menue "move_axis" added
13 years ago
b5fae1104b
fixed sUICIDE_PIN disable
13 years ago
f9c5333f97
Made "stop heating wait" optional.
...
Default off.
13 years ago
292ddd2edb
Fix Z_LATE_ENABLE
13 years ago
25cd8af536
added arduino ide GEN7 support Files
13 years ago
14702089ee
-disable TEMP Min MAX Kill while using PS_ON Pin
...
ON GEN7 there is no temperature reading when power is off.. so Marlin
would kill itself. There seems to be an update from "Traumflug" on GEN7
using standby VCC for thermistors.
13 years ago
b51e8bf7e5
-disabled CARDDETECT if PIN is set to -1
...
- redo disable Beeper if PIN is set to -1
13 years ago
3183a14755
-added Configuration for GEN7 which worked for me
13 years ago
5edef148fe
-disalbe beeper if BEEPER_PIN = -1
13 years ago
13e2ad2831
- added info for using GEN7 configuration
13 years ago
59cc5f889e
- added support for ATMega1284P
13 years ago
a11f3b2d2f
- Pins for modified GEN7 assigned
...
- Added support for ATMega1284
13 years ago
abb7e63906
fixed z-disable bug.
13 years ago
9f139d6e0e
Added MAX6675 support. (Thanks to gregfrost)
...
Needs some work to remove the blocking in read max6675.
13 years ago
e45e5c68bb
Added support for Gen3+ (Pins file only)
...
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.
Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
13 years ago
9c918a497b
more work on Makefile - actually rebuilds if Makefile or Configuration.h are altered, also much cleaner output
13 years ago
ab01658fd2
local configuration stuff- WATCHPERIOD causes breakage, disable. few other misc changes
13 years ago
42bedb3f60
PROGMEM elements must be const
13 years ago
a991bde523
enable auto-reset before programming, disable afterwards
13 years ago
3e575533c5
get M81 working
13 years ago
2ae2ead97b
help residency not overflow
13 years ago
71dc82e0b4
my local configuration
13 years ago
5aadc2f5ca
cardreader needs to include some other files
13 years ago
8d0916af13
allow Marlin to actually compile with Makefile pulled from Sprinter and a few other modifications
13 years ago
6cc6029d7a
M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print
13 years ago
157aa7f2fd
m115 eol fix
13 years ago
7aeb45303d
small mistake
13 years ago
cee5f9020a
added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output.
13 years ago
3814bbb529
made sd code only compile with SDSUPPORT defined. safes 10k of codespace
13 years ago
729cde4475
fix autostart failure if in wrong directory
13 years ago
396270a0de
fix duplicated definition of MOSI MISO pins in case motherboard==33
13 years ago
11f2dafc4e
one step closer to a functional makefile..
13 years ago
8463e39a4a
starting with sanguino arduino 1.0 compatibility
13 years ago
2bc160a978
add wiring.h, that can be used to overwrite:
...
arduino-0023/hardware/arduino/cores/arduino/wiring.h
this is necessary if the avr libraries are recent, but arduino is old. Alternative: newer arduino
13 years ago
57f9359a41
simplified the includes, makefile now works with arduino23
13 years ago
3c1a4aac2b
header file simplification
13 years ago
212515148e
added m240 photography support. default off
13 years ago
6735025428
cooldown
13 years ago
415aadf704
lcd panel bed support
...
advance and ultipanel not any more in default config
13 years ago
554cc1718d
Fiexed E_ENABLE_PIN errors
13 years ago
617968ab76
G92 fix
13 years ago
84d9cf7339
merging
13 years ago
e017228569
Merged multiple extruder support.
...
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
13 years ago
3320a5b37d
make autotemp compatile for use without pid
13 years ago
06411d5c9e
ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints.
13 years ago
82c99625fa
instant stop of sd prints from the panel.
13 years ago
01001b89d2
repaired nozzle runout prevention to not collide with automatic stepper disabeling.
13 years ago
88ee053af0
heating up santity, formarly knows as "watchdog", but renamed due to the existance of the real watchdog, works now.
13 years ago
b1d84d879b
st_synchronize back to normal..
13 years ago
f6fe7143e4
Merge pull request #29 from k-eex/Marlin_v1
...
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
13 years ago
dde4b40fa9
disable steppers in runout prevention
13 years ago
2bc5e7ec9e
prevent too long extrudes, or too cold extrudes
13 years ago
aa4f9a6474
better values.
13 years ago
87fd249c43
made runout prevention independent of tempeorarily set esteps
13 years ago
1ec0c3b68a
extruder runout prevention.
13 years ago
5b4625f79c
added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing.
13 years ago
cc4a9cdb69
added autostart procedure trigger to the ultralcd menu
13 years ago
61c943b4bf
fixed the st_synchronize. it would have continued if there is only the last move of the buffer being stepped.
13 years ago
bae1e422f6
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
13 years ago
754d2d69b2
z homing sound fix, for now until the actual cause is found..
13 years ago
986f0ba76c
moved <stdio.h> to more dominant location.
13 years ago
460b788d78
repaired homing position setting.
13 years ago
4fd75dc813
Working version of multiple extruders (up to 3)
...
- The temperature control is pretty much complete
(not sure what to do w/ autotemp though)
Changed the pins assignment to clearly separate bed and extruder heaters
and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
(only chanages what pins it uses depending on the active_extruder var,
but that's enough for switching extruder in the start.gcode in the
the profiles)
- Tested only w/ RAMPS 1.4
13 years ago
12e8edcac3
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
13 years ago
cf50ba140f
added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab.
13 years ago
89e832c295
Update endstops only for homing. (use less resources when not used)
13 years ago
linagee