615 Commits (1a8f54cea1355f95dc68815627b9e7bff33a7a5a)

Author SHA1 Message Date
Bracken Dawson 2873d67b17 Put bogus temp override back in Gen7 up to 1.3
Took out the ifdef when I split 1.4 out and forgot to permanently
define it for <=1.3.
12 years ago
ErikZalm a7e40b2903 Merge pull request #276 from setar/Marlin_v1
Fix num of digits on LCD for E and Z axis.
12 years ago
MaikStohn 6ed02c86be Fixed wrong code (will not even compile when EXTRUDERS>2) 12 years ago
Sergey Taranenko 2a67363e27 Fix ‘prog_uchar’ definition in LiquidCrystalRus.cpp 12 years ago
Sergey Taranenko 205304ddee Merge git://github.com/ErikZalm/Marlin into Marlin_v1 12 years ago
Erik vd Zalm 58bca87c72 fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 ' 12 years ago
Erik vd Zalm febeb43197 Revert "fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '"
This reverts commit cb02c2f9d8.
12 years ago
Sergey Taranenko 8178dec4c3 Fix num of digits on LCD for E and Z axis.
The number of steps per mm often contains 4 digits before the decimal point and does not require precision greater than 0.1
12 years ago
ErikZalm 70f57a6844 Merge pull request #273 from setar/Marlin_v1
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
12 years ago
ErikZalm ff14199e58 Merge pull request #270 from jothan/Marlin_v1
Create an explicit rule for building applet/Marlin.cpp.
12 years ago
Daniele Sdei 695938ba3f Italian language support 12 years ago
Sergey Taranenko cb02c2f9d8 fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 ' 12 years ago
Jonathan Bastien-Filiatrault e4a5e333ef Generalize. 12 years ago
Jonathan Bastien-Filiatrault e10d3136c8 Create an explicit rule for building applet/Marlin.cpp.
It would seem that the pattern matches do not work when the source
file is created when make is running. The result of this is that it is
necessary to run "make" twice to build the firmware.

This adds an explicit rule without a pattern match for building
applet/Marlin.cpp it corrects the make behaviour at the cost of adding
a little redundancy in the Makefile.
12 years ago
ErikZalm 9f089756b7 Merge pull request #265 from setar/Marlin_v1
Added Russian translation
12 years ago
brupje 326423719f Add support for Megatronics 12 years ago
brupje d07b6e93d5 Add support for Megatronics 12 years ago
Sergey Taranenko efcc28d347 Fix check for include LiquidCrystalRus.h 12 years ago
Sergey Taranenko cfc193cdac Enables support the Cyrillic alphabet for LCD 12 years ago
Sergey Taranenko 24bcc9647d Added Russian translation 12 years ago
Mark Finn bf7e453d02 Unwanted artifacts from unclean merge of bed-pid tree 12 years ago
ErikZalm 36a746d7d5 Merge pull request #244 from markfinn/pidbed
PID for heated bed
12 years ago
elgambitero df09e2adce Spanish updated 12 years ago
elgambitero ddf6603d81 Spanish language updated. Bug fixes on dialogs. 12 years ago
elgambitero 4bf8b1aeee fesfas 12 years ago
elgambitero 7afd202b89 New dialogs translated to spanish. Bug fixes.
Dialogs from M119 translated, and "Set Preheat" dialogs adapted to the
screen size.
12 years ago
elgambitero ebc4601185 Some new dialogs translated to Spanish 12 years ago
johnnyr 8016f058bc fix max endstop pins 12 years ago
Mark Finn d197f8504b clean up and changes from testing 12 years ago
Mark Finn eb06a886c4 missed 12 years ago
Mark Finn 04631d2250 cleanup for pull 12 years ago
Mark Finn 0a5ad3ab85 move comment to correct place 12 years ago
ZetaPhoenix 8ac5b29e02 Changes to M119 response for easier visual comparison
Changed to report on individual lines with "TRIGGERED" or "open" instead of "H" or "L" on one line as H&L could be confused with logic levels High and Low which may be wrong if using inverted logic.  Added strings to language.h.

Fixed typo "deu" in English language that was fixed in #134 but got added back in via 9f7f7354f5
12 years ago
ZetaPhoenix c6caa45ae2 Limit Switch locations based on MIN/MAX limits and homing direction
fixes #246
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
Relocated code based on feedback.
12 years ago
ZetaPhoenix dc566d654f fixes #246
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
12 years ago
ErikZalm ba898faa7d Merge pull request #249 from gwelchc/patch-2
Slight modification for byte savings
12 years ago
ErikZalm 0152ee71a5 Merge pull request #248 from gwelchc/patch-1
Binary representation for characters in ultraldc.pde
12 years ago
G. W. C. 6ccbfeb80c Update Marlin/Marlin.pde
Added function 'setTargetedHotend' that turns into a function an operation repeated 3 times through the M-codes processing.

This modification saves a few bytes that can be used to add support for new commands.
12 years ago
G. W. C. c433142abf Update Marlin/ultralcd.pde
The joris' char drawins are expressed in binary so to show their content's in a more visual fashion.

This is not a code modification as much as a readibility modification.
12 years ago
andrey-vasilyev 1d389ad3a8 Fix M81 not working reliably on Gen7
Some discussion of the issue is here http://forums.reprap.org/read.php?181,118329,page=1
12 years ago
Mark Finn 9698f4ea64 bed pid
Conflicts:

	Marlin/Configuration.h
12 years ago
ZetaPhoenix e8c92e0a95 Missing #else in temperature.cpp prevented reading bed temp when TEMP_BED_PIN <7. Thanks to Leland Wallace for helping me track this down via "Sesame Street" coding (what is not like the other) 12 years ago
Erik vd Zalm abf0693e8e Added KILL_PIN -1 to gen7 boards 12 years ago
Erik vd Zalm 47319cf64e Fixed typo in SF arc fix code. 12 years ago
Erik vd Zalm e358a2d7af Added fix for SF Arc Point fillet procedure 12 years ago
ErikZalm 044a64a1fb Merge pull request #225 from Justblair/Marlin_v1
Added PDF file containing Menu Tree for documentation purposes.
12 years ago
Drakelive d728e35658 Update Marlin/pins.h 12 years ago
tonokip 1c1fddc7ac Added support for the Rambo reprap electronics board. Added Mcodes to set
motor current and microstepping pins.
12 years ago
Blair Thompson dcd3e8a211 Tidy up 12 years ago
Blair Thompson ddd9d0cfd4 Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included. 12 years ago
Erik vd Zalm 0e58ef6805 Some dialogs are corrected 12 years ago
Erik vd Zalm 0e89022cc3 Correct temptable_55 name. 12 years ago
Bracken Dawson 47d4f55bc0 Fix Gen7 1.4 pinout
Gen7 1.4 uses very different pin assignments, might as well make a new
section and remove some of the conditionals from each. It's easier to change
your pin assingment this way if like me you don't wire it exactly to plan.
13 years ago
elgambitero 6cd150842f Update Marlin/language.h
Some dialogs corrected and Default language set to 1
13 years ago
elgambitero 299c18596f Update Marlin/language.h
Some dialogs are corrected
13 years ago
ErikZalm b86336c3f5 Merge pull request #221 from daid/Marlin_v1
Long filename support for LCD display
13 years ago
daid b69e75c89a Added long filename support. 13 years ago
stohn 1d224cc031 merged with upstream and FIXED AGAIN bad translation commit
PLEASE BE MORE CAREFUL WHEN SUBMITTING NEW TRANSLATIONS

When you add new menu items / messages always copy them to ALL
languages (just use english)
13 years ago
stohn 06c03fe2f0 new method for message for making KILLED message visible
The cli(); at the start of the kill() function also stops the internal
arduino timer which stops updating of millis() which prevents the
display of the "KILLED." message.
The new function updates the display directly without checking any
timers.
13 years ago
daid 87ff61a8a6 Fix for #201 13 years ago
Blair Thompson aacbebbebe Added Menu Options to the Main-> Control->Temperature Submenu that allow the user to set new values for the ABS and PLA preheat function. EEPROM updated so that these settings can also be committed to EEPROM memory. 13 years ago
stohn 31873ec707 changed int to long to overcome overflow of number display
- related bug reports: Issue #201, Issue #213
13 years ago
stohn de0448343f added KILL_PIN support / cleaned up manage_inactivity function definition 13 years ago
stohn 69961dbba3 fixed incorrect menu messages from last commit...
- removed several multiple definitions of same message
- fixed definition of missing messages in german and spanish
- tweaked german translation (a lot)
- added note about changing and testing this file
13 years ago
Blair Thompson 6c050b8440 Fixes error introduced at commit aee475aa55 which caused the sketch not to comile for language option 1. Several defines were removed but still referenced in ultralcd.pde 13 years ago
Blair Thompson b9f9f8f7d3 The pre-heat ABS and PLA options in the LCD Menu were broken a while back. The pre-heat worked fine, but the cooling fans were not switching on as intended. This is now fixed. 13 years ago
elgambitero d38b96fff1 Update Marlin/language.h 13 years ago
Erik vd Zalm 9f7f7354f5 Set default language 1 13 years ago
elgambitero aee475aa55 Update Marlin/language.h
Spanish language included. It features the LCD screen messages and a small part of the Serial messages.
13 years ago
Erik vd Zalm 9083966c22 Do not use feedrate multiiply on Z and E only moves. 13 years ago
Erik vd Zalm 5406c533db Disable FAST_PWM by default. On some systems it does not work ok. 13 years ago
Erik vd Zalm f92dc91c3d Enable M503 also when eeprom is disabled 13 years ago
James Adams 35a1dd081f no message 13 years ago
James Adams 5131ab19ca Fixed Retract in LCD Menu 13 years ago
James Adams 96f4f90cb3 Added pause and retract lcd menu items 13 years ago
James Adams e10355500d Updated Language.h with pause, resume, and retract 13 years ago
ErikZalm a97c006bbf Merge pull request #195 from kobaan/Marlin_v1
Updated german translations in language.h
13 years ago
ErikZalm f062794a0d Merge pull request #208 from Enchiridion/Marlin_v1
Added support for dual Z axis stepper drivers
13 years ago
ErikZalm 57468d3c21 Merge pull request #210 from Dabble63/Marlin_v1
Add Duty Cycling to the Heater Bed
13 years ago
Dabble63 6b45e9f167 Add Duty Cycling to the Heater Bed 13 years ago
Ian Jackson adee81170d M206: save values in eeprom
Really, we should have a way to adjust the XYZ homing of a machine in
the eeprom.  So as the second stage of this, make the M206 home offset
parameters subject to the M500/M501/M502/M503 eeprom commands.

Bump the eeprom version to "V06".

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
Ian Jackson 1dba212e18 HOMEAXIS: make into a function
Replace the large macro HOMEAXIS with a function.  This avoids the
compiler generating three copies of largely identical code.  The
saving is 724 bytes of program memory.

We make use of XYZ_CONSTS_FROM_CONFIG to provide convenient
array-shaped access to MAX_LENGTH, HOME_RETRACT_MM and HOME_DIR.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
Ian Jackson 7bb326d389 eeprom: provide smaller code for SERIAL_ECHOPAIR
SERIAL_ECHOPAIR implies, eventually, two calls to MYSERIAL.print.  One
of these has FORCE_INLINE for a per-character loop, and both involve
constructing a method call rather than a simple function call.

Produce better and smaller code by providing three specialised
functions serial_echopair.  This saves 672 bytes of program memory
(with EEPROM_SETTINGS and SDSUPPORT enabled).

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
Ian Jackson 957e966d2d M206: always use homing ("homeing") offsets
Previously the parameters set in M206 would only be used if a G82
command was sent with specific axis home values.  This limits its
usefulness.

Really, we should have a way to adjust the XYZ homing of a machine in
the eeprom.  So as the first stage of this, make M206 affect every
home command.  The values set using M206 are now added to the
configuration variables [XYZ]_HOME_POS.

This is achieved by replacing all uses of [XYZ]_HOME_POS in the code
by a new home_pos[] which includes the adjustment.  We also have to
adjust the uses of [XYZ]_{MIN,MAX}_POS similarly - see below.


To allow axis_is_at_home to be written as a function taking an axis
index rather than a macro taking an axis letter, we provide
constant arrays in program memory containing the values of
[XYZ]_{MIN,MAX,HOME}_POS from the compiled-in configuration.

This is done with some helper macros to deal with the declaration
(XYZ_CONSTS_FROM_CONFIG) and definition of the inline function which
does the program memory access.

We also introduce the overloaded function read_pgm_any, whose
instances are produced with DEFINE_PGM_READ_ANY, which allows the
access functions to automatically produce the correct type.

The type- and pointer-massaging code in the access function boils
down, when compiled, to a simple program memory access.


A question arises: if the M206 offset is set, should this adjustment
to the home position shift or change the possible range of movement
permitted by the software endstops ?

The documentation in Configuration.h describes these limits as:
    // Travel limits after homing
Since this is a file containing physical limits, and actual suggested
values for these configuration parameters appear to include a certain
amount of slop, I've taken the view that these should be regarded as
nominal physical distances from the limit switches, and that the
permissible travel should be unaffected by M206.

So for example with the (rather unrealistic)
  #define X_HOME_DIR -1
  #define X_MIN_POS -20
  #define X_HOME_POS 0
  #define X_MAX_POS 100
no matter the setting of M206 X, the machine would be permitted
to move from 20mm "beyond" the limit switch trigger point in
the negative X direction and 100mm away from the limit switch in
the positive X direction, for a total travel of 120mm.

With M206 X-10 that would be considered to correspond to X coordinates
-30 to +90.  With M206 X+10 that would be considered to correspond to
X coordinates -10 to +110.


fixes #200 (in ErikZalm/Marlin).

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
Ian Jackson faccb35850 software_endstops: use *_MIN_POS and *_MAX_POS for arcs
If [XYZ]_HOME_POS and [XYZ]_MIN_POS aren't 0, these corrections are
wrong.  Use the same logic as in Marlin.pde:prepare_move: ie, clamp to
[XYZ]_{MIN,MAX}_POS.

While we're here, put this cut-and-paste code in a function
clamp_to_software_endstops.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
Ian Jackson 3f15b7c7b8 Makefile: Better display of size (device memory usage)
Run avr-size with the --mcu=... -C option as well.  That reports how
much actual device program and data memory is used along with a
percentage fullness.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
Ian Jackson 0c35facc94 Makefile: support V=1
Often it can be useful to see the actual commands being run by make.
Other projects (eg, the Linux kernel) support this with a "V=1" make
parameter.  Do the same here.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
Ian Jackson 71404eef29 .gitignore: Add *~, *.orig, *.rej, move to root directory
Move the .gitignore out of the Marlin subdirectory so it applies to
the whole tree, and add some missing patterns.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
Ian Jackson a873541ef6 Marlin.pde: include comment for emacs mode
Emacs by default doesn't recognise a ".pde" file as C++ source code.
Add the annotation to the top of the file to make it work.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
13 years ago
Enchiridion 50cde90324 Added support for dual Z axis stepper drivers 13 years ago
kobaan 603a5e25b3 Updated german translations in language.h and eliminated a few double lines. 13 years ago
Chris Palmer 538189cc19 Fixed soft limits when the origin is in the middle.
HOME_POS is now always where the endstop is and can be outside the limits.
The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH.
The Z is axis now homed first if direction is away from the bed.

Saguinololu limit pins change from MIN to MAX according to the homing direction.
13 years ago
ErikZalm 686011a548 Fixed typo 13 years ago
Erik van der Zalm cd57bf305b Merge git://github.com/daid/Marlin into Marlin_v1
Added invert step pins to corexy code
13 years ago
Erik van der Zalm ea2c19f978 Added CoreXY support (Thanks Ilan Moyer) 13 years ago
Erik van der Zalm aa65fe22ed decoupled axes sucessfully at least on pure x or y jog 13 years ago
daid 12de8fff81 Support step motor controllers with active low step pins. 13 years ago
Erik van der Zalm b67dacdc8f Fixed AD595 define 13 years ago
Bernhard d3002ef741 corrected retract 13 years ago
Bernhard 0c123950e9 __ header file replace 13 years ago
Bernhard bf077125b9 added firmware retract. disabled by default 13 years ago
Bernhard 0e5e249ab5 added individual pullup setting option to have finer control in case there is a special z-min sensor, for example 13 years ago
Bernhard Kubicek 6b14f95b3e Merge pull request #170 from linagee/Marlin_v1
Marlin v1
13 years ago
Bernhard Kubicek c7ce99d495 Merge pull request #172 from daid/Marlin_v1
Add M401 - Wait for user to press button on LCD (with optional timeout) minor fix in M115.
13 years ago
Bernhard Kubicek b7fc14bc65 repaired thermistortable_6 by graphcial fitting of the off-slope values. see issue 179. Erik, I know you asked for no changes, but this file probably is not related and hopefully allright. 13 years ago
ErikZalm 9e1021efbe Fixed SL bug. 13 years ago
Daid e9bec9b6fe Fixed E1_ENABLE pin for Ultimaker. This was wrong for the 1.5.4 and 1.5.3 PCB (I cannot check the 1.5.6) 13 years ago
linagee fbd282b3ba Update Marlin/Configuration.h 13 years ago
linagee 2e8c5049c5 Update Marlin/thermistortables.h 13 years ago
linagee 2d0d8e5272 Small correction. 13 years ago
Daid 4d7fe7115f Changed M401 to M0/M1 as suggested, so they match normal CNC stop commands. 13 years ago
linagee 9e9db65c3f Update Marlin/thermistortables.h 13 years ago
linagee bd966ef389 Update Marlin/thermistortables.h 13 years ago
linagee 775da3f103 Added top ratings and extended to ADC=1 for table 3 and 5. 13 years ago
linagee 96a4baa0be Update Marlin/thermistortables.h 13 years ago
linagee 2aa9f7b131 Update Marlin/thermistortables.h 13 years ago
linagee c4490f5f3d Update Marlin/Configuration.h 13 years ago
linagee dd9144994e Tested May 19 - It works! Verified with separate thermocouple TM-902C also. 13 years ago
linagee 4c37d0d9f1 Extended range above 250C. (Operating range states up to 300C) 13 years ago
Daid b59724e42b Add strigification for extruder amount in M115 report. 13 years ago
Daid 16413bb8f2 Last M401 update, refresh the LCD during an M401 wait. 13 years ago
Daid b3941fce5c Update after testing 13 years ago
Daid d494688565 Do not initialize in the header file. 13 years ago
Daid 516ec90242 Add M401 - Wait for user on LCD button press 13 years ago
Daid 7244aa7eb7 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
linagee de2ca3b2e8 Grammar correction. 13 years ago
linagee c2fc466e1b Update Marlin/Configuration.h 13 years ago
linagee 241f5a4c0e Update Marlin/thermistortables.h 13 years ago
linagee 9f9f498491 Update Marlin/Configuration.h 13 years ago
Erik van der Zalm e31bef31ad Limit PID autotune PWM to PID_MAX 13 years ago
ErikZalm b2a9ccdb97 Merge pull request #159 from MaikStohn/Marlin_v1
Marlin v1 - BUG FIXES / CORRECTIONS
13 years ago
Erik van der Zalm d459fb41b7 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 13 years ago
ErikZalm 804e0d6117 Merge pull request #164 from guanix/Marlin_v1
Melzi support
13 years ago
Erik van der Zalm ba96059203 add additional dropsegments test 13 years ago
zittix fbd91ab0b5 Fixes #153 for bad call to abs() 13 years ago
MaikStohn b51c06e2b3 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 13 years ago
MaikStohn 159ae90874 bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only) 13 years ago
MaikStohn e48f5aa6a7 fixed typo 13 years ago
MaikStohn 1efe9ab497 changed encoder pos from int to long to fix problems setting x/y/z/e stepps_per_mm using the lcd menu 13 years ago
Guan Yang 602c8ee02b Melzi support 13 years ago
Daid 279d00da9f Fixed #if for Ultimaker. 13 years ago
Bernhard Kubicek 451f9cc6d1 Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer. 13 years ago
Erik de Bruijn e3fe1f0d00 Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed.
Turning off the protection might be beneficial to those who want to do fast and long reversals.
13 years ago
Erik de Bruijn d88205d89d Suggestion to improve (TODO), no actual code changed 13 years ago
Erik de Bruijn 5aa80e6c05 Made language.h more flexible. Automatically do the right defines based on MOTHERBOARD == 7 ? "Ultimaker" : "Mendel" 13 years ago
MaikStohn b657a18449 Revert "magic PROGMEM defines to avoid hundreds of wrong GCC warnings"
This reverts commit 3682d9bd5b.
13 years ago
MaikStohn d188ae4c9d added missing declaration of buttons_init()
This is required when moving the buttons_init() function to the
lcd_init() function
13 years ago
MaikStohn 3682d9bd5b magic PROGMEM defines to avoid hundreds of wrong GCC warnings 13 years ago
MaikStohn 032df0b2c6 Moved LCD initialization out of constructor
Since the class "MainMenu" was used within a static variable the
initialization of the object (constructor call) was done before Arduino
library startup. It always caused a crash when using AVRStudio with
JTAG debugger (caused from calling the LCD initialization / the lot of
I/O work / the stack used during this calls). By moving the LCD_INIT
out of the constructor and using an explicit call inside of Arduino
setup() implementation immediately fixed all problems and the JTAG
debugger runs fine.
13 years ago
MaikStohn bd1ad7c76a explicit includes to make it compile with AVRStudio/Eclipse 13 years ago