1b7356b3a1
Account for home_offset in G29 handler
9 years ago
f3562dd895
Have M206 alter current_position, M428 use new function
9 years ago
6d465321b5
Adjust timeout code in host_keepalive
9 years ago
50c3140040
Merge pull request #3414 from thinkyhead/rc_host_timeout_mods
...
Host Keepalive configurable timeout with 2s default
9 years ago
1acf901b63
Adjustments to residency_start_ms handling
9 years ago
907aed57db
Fix bug which can cause an infinite M109 loop
...
Since residency_start_ms is -1 when entering the heatup while loop whilst the hotend temp is close to the target them already then it may not escape.
Hence "Start the TEMP_RESIDENCY_TIME timer when we reach target temp for the first time."
9 years ago
dd3a06a95a
Implemented M155 and M156, a generic TWI/I2C interface for Marlin
9 years ago
843aa90b5a
Merge pull request #3434 from thinkyhead/rc_more_debug_leveling
...
Additional debug leveling output
9 years ago
a644ab1de4
Minor patch ups to `G29`
...
This may fix a subtle bug caused by doing `G29` more than once without
`G28` between.
9 years ago
cba2698871
Additional DEBUG_LEVELING output
9 years ago
5e18d650c4
Merge pull request #3427 from thinkyhead/rc_better_SERIAL_ECHOPAIR
...
No casting needed for SERIAL_ECHOPAIR
9 years ago
e0b0d1eb6b
Add M113 to get/set Host Keepalive
9 years ago
85883da90c
Implement basic HOST_KEEPALIVE_INTERVAL
9 years ago
098fb8f8c9
Merge pull request #3413 from thinkyhead/rc_probe_G30_position
...
Report the probe position in G30
9 years ago
c9c7c66b95
Merge pull request #3421 from jbrazio/bugfix/m109-EXTRUDE_MINTEMP-expansion
...
M109: Protect against EXTRUDE_MINTEMP expansion
9 years ago
d7cbb2eec9
Merge pull request #3403 from jbrazio/feature/stopwatch
...
Print job timer rework
9 years ago
dc19b69697
No casting needed for SERIAL_ECHOPAIR
9 years ago
471d30cc1c
M109: Protected against EXTRUDE_MINTEMP expansion
9 years ago
7c7e30f4cc
Adherence to the new OOP coding standards
9 years ago
865dcf3fb4
Fix FILAMENT_WIDTH_SENSOR measurement
...
Only measure and store filament width when E is going forward.
9 years ago
2f6c5fe2da
Report the probe position in G30
9 years ago
e48d0263bf
Bugfix: M32 was still using the old print timer
9 years ago
e8b80d8c20
Implemented M75, M76, M77 to control the print timer
9 years ago
eb61051556
Rework the print job timer to use the stopwatch class
9 years ago
98f2e9fc83
Reduce string storage required for DEBUG_LEVELING
9 years ago
1af5d7b35f
Add more leveling-debug output
9 years ago
56e8e2b0eb
Final tweaks to M111 output
9 years ago
d819a4aff9
Fixes #3346 , followup #3343 : variables must defined with the static keyword to work with PROGMEM when defined inside functions
9 years ago
de39056f68
Merge pull request #3343 from thinkyhead/rc_fix_m111_output
...
Fix M111 output using pgm_read_word, as required
9 years ago
fd0ac371b0
Fix M111 output using pgm_read_word as required
...
As noted by @taratata2016 in https://github.com/MarlinFirmware/Marlin/issues/3300#issuecomment-204687275
9 years ago
d771174797
Merge pull request #3337 from esenapaj/patch-2
...
suppress warnings
9 years ago
d24f14a799
Add HAS_TEMP_HOTEND define
9 years ago
f9e1a0ee6c
suppress warnings
9 years ago
80b8fd1cad
Add MSG_HOME_OFFSETS_APPLIED
9 years ago
bc86ee0271
Simplify `homeaxis` with some macros
9 years ago
82ef101ed5
Deploy & Stow in G29 for Delta + Z Servo Endstop
9 years ago
de333c4fea
Merge pull request #3279 from thinkyhead/rc_filament_width_sensor
...
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
9 years ago
8def2c31db
Merge pull request #3284 from thinkyhead/rc_stop_watchheat_lcdset0
...
Fix temperature checking conditions (backwards!)
9 years ago
8bf5f7c676
Merge pull request #3282 from jbrazio/bugfix/m104-timer-wont-start
...
M104 not starting the print timer
9 years ago
31450ad498
Fix temperature checking conditions (backwards!)
9 years ago
187c183c20
M104 was not starting the print timer
9 years ago
507aef055f
Patch broken M404
9 years ago
1a79b13b7a
FILAMENT_SENSOR -> FILAMENT_WIDTH_SENSOR
9 years ago
5f32184254
Merge pull request #3278 from thinkyhead/rc_cleanup_m111_redo
...
Echo all debug levels in M111, default to DEBUG_NONE
9 years ago
05765fb570
Add DEBUGGING macro
9 years ago
4402760739
Echo all debug levels in M111, default to DEBUG_NONE
...
Redo of #3268 by @jbrazio
9 years ago
f0b96f5cae
Merge pull request #3276 from thinkyhead/rc_sdprint_and_lcd_sleuth
...
Refinements, fixes, reduced stack usage in CardReader
9 years ago
12c0bf9521
Merge pull request #3277 from jbrazio/bugfix/m190-temp-never-reached
...
M190 bed temp is never reached
9 years ago
c6577aea60
M190 bed temp was never reached
9 years ago
27d70599d4
Change openFile default to "not-push" instead of "do-replace"
9 years ago
3252df7998
Minor cleanup to filament sensor code
9 years ago
0b8ef5eba6
Split get_command into units, rename to get_available_commands
9 years ago
545f7997ea
Continue on empty lines instead of returning
9 years ago
3dcf6d42ff
Don't store escaped serial characters if comment_mode
9 years ago
5f8e52aefb
Minor cleanup to command dispatcher
9 years ago
f1ed310322
Add NUMERIC compare macros to simplify code
9 years ago
443e6d26fe
Formatted multi-line comments
9 years ago
e4039a9b5b
Merge pull request #3250 from esenapaj/patch-1
...
Fix typo
9 years ago
cd4c3e90bc
Send a busy signal every 10 seconds instead of every 2
9 years ago
26168676e7
Merge pull request #3246 from thinkyhead/rc_fix_numeric_filenames
...
Fix: current_command_args skips digits at the front
9 years ago
f54315c728
Fix typo
...
These are salvaged from closed-PR #3216 .
9 years ago
f423716c6a
Fix: current_command_args skips digits at the front
...
Closes #3245
9 years ago
18de9f55ac
Merge pull request #3242 from thinkyhead/rc_epatel_mesh_fixes
...
Updated Mesh Bed Leveling
9 years ago
3a1e6b1752
Merge pull request #3243 from AnHardt/homed
...
axis_known_position -> axis_homed
9 years ago
94962ee678
axis_known_position -> axis_homed
...
In all these cases we want the axis to be homed. If we could have lost
some steps is secondary.
Reenables homing seperate axis with DISABLE_X / DISABLE_Y true.
9 years ago
14afe1a017
Move to Z=0 for G28 when using Manual Bed Leveling
...
copy of 406992f9dd
9 years ago
c606ed447a
Add "G29 S4" to fine tune Z level for Mesh Bed Leveling.
...
Also add mbl.z_offset to the EEPROM, bumping the version to V23.
9 years ago
5d8036e554
Code cleanup around MOTOR_CURRENT_PWM options
9 years ago
0da744b7b0
Further cleanup of comments, partial Doxygen-style
...
Following up on #3231
9 years ago
4823791eb0
Merge pull request #3228 from esenapaj/patch-1
...
Fix spelling
9 years ago
5e5d250832
Added gplv3 header to all Marlin files
9 years ago
89a845659a
Fix spelling
...
PROBABLE ->PROBEABLE
This is follow-up to #3069 ?
9 years ago
af32a7d5d6
M120/M121 also set endstops non-homing state
9 years ago
04fa9d4f47
Make Autotune options into Menu Edit Items
9 years ago
e3f583a3be
Fixes for PID AutoTune from menu
...
Fixes for #3189
Setting a temp is still missing
9 years ago
3b3e8a02b5
Initial implementation of PID Autotune Menu Items
...
Adds the parameter U to M303. If U1 is included , it will use the
PID-values from the auto-tune.
9 years ago
c5857f96c8
Merge pull request #3182 from thinkyhead/rcbugfix_printrboard_revf
...
Add support for Printrboard RevF
9 years ago
f774420488
Merge pull request #3196 from thinkyhead/rc_controllerfan_bug
...
Make DISABLE_INACTIVE_X, etc., true if missing
9 years ago
1c6a16d5bb
Send position updates to RH
...
Send position updates to RH where RH can not know the end position.
For example after G28 RepetierHost assumes to be at the homing-point,
but with a servo probe we are much higher. Now the RH-software-endstops
will prevent us from going down (if activated). With this patch the
internal position of RH is updated with `current_position[]`.
9 years ago
6486e8b74a
Call buzz() directly from M428
9 years ago
b1a3a95ad4
Tweak controllerFan to save a cycle or two
9 years ago
10caee2b7c
Merge pull request #3187 from AnHardt/target_extruder_number
...
Fix extrudernum in MSG_INVALID_EXTRUDER
9 years ago
1cc316f1fd
Merge pull request #3082 from thinkyhead/updated_2820
...
This is quite comprehensive. If probes are disabled in any case when they shouldn't be, I'm sure we will hear about it soon.
9 years ago
7bf5d117e7
Merge pull request #3069 from thinkyhead/rc_delta_compat_m48
...
Delta-compatible extensions to M48
9 years ago
06332f20be
Merge pull request #3113 from jbrazio/bugfix/3061-stop-print-time-counter
...
Stop print timer with M105/M109
9 years ago
338b69c24b
Fix extrudernum in MSG_INVALID_EXTRUDER
...
SERIAL_ECHO is not very good in printing uint8_t - so cast. to int.
9 years ago
b39b54031b
Fix KEEPALIVE_STATE
...
Add return to NOT_BUSY for M105
Replace WAIT_FOR_USER with PAUSED_FOR_USER
Add Travis test for FILAMENTCHANGEENABLE
9 years ago
41145e6e81
Patch drain_queued_commands_P
...
Fix a SNAFU that should have been caught in #3012
9 years ago
59483221d5
Move stepper DAC to a separate file
9 years ago
5d0570cea0
Make digitalPotWrite depend on HAS_DIGIPOTSS
9 years ago
f96bc03081
Add M907-M910 g-codes support for Printrbot Rev. F
9 years ago
cf7c444aff
Apply unknown_position_error elsewhere
9 years ago
eda5190581
Check for known position in `M48`
9 years ago
68085ca855
Updated M48 friendly for DELTA
...
Partial implementation with reference to MarlinFirmware/Marlin#3011
9 years ago
38b0082bf2
Additional tweaks to M42 exit conditions
9 years ago
4bbea5124d
Support for multiple PWM fans
9 years ago
637cc03686
Fix M109 so it won't wait for cooling
...
Addressing issue #2767
9 years ago
3f45a1acf9
Check probes only when deployed
...
Aim: Test probes in update_endstops only when activated
Changes:
Configurations
Add define for FIX_MOUNTED_PROBE to handle the situation where formerly ENDSTOPS_ONLY_FOR_HOMING had to be set, or lowering the nozzle below Z_PROBE_OFFSET_FROM_EXTRUDER could give an "endstop hit" message.
Add define for Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN to indicate a common situation, that we have a probe but it is connected to an endstop pin
Add some comments
Shift some entries to have related things together.
Conditionals.h
We have a probe (HAS_Z_MIN_PROBE) if one of the pins is defined AND one of the probes is defined.
SanityCheck.h
Add some tests if the probe is connected and if we have defined a probe.
stepper.cpp
Changes to test the probe only when it is deployed (z_probe_is_active).
Test update_endstops() when the probe is deployed.
MarlinMain.cpp
a. set and reset z_probe_is_active in deploy_z_probe(), stow_z_probe() and dock_sled()
b. set and reset z_probe_is_active in the case a z-servo is moved to a defined position. The only remaining unhandled servo move is in M280 where we do not end in a defined position. If you want to handle a probe use M401/402
c. skip deploying/stowing when already deployed/stowed in the dedicated deploy/stow functions.
d. Handle the new FIX_MOUNTED_PROBE in parallel to a servo driven probe/endstop.
To do: In another PR. handle all probes in deploy/stow_z_probe.
Sort out SERVO_LEVELING vs. HAS_SERVO_ENDSTOPS.
9 years ago
4634feaeab
Merge pull request #3012 from thinkyhead/fix_command_injection
...
Use a serial line buffer to prevent queue corruption
9 years ago
963a92ceda
Patch idle forevermore
9 years ago
7ec7bb31c4
Send a Busy signal to hosts during long processes, wait for input, etc
...
If Marlin is blocking the serial input or command queue for any length
of time (for example more than 2 seconds), it needs to send a message
to serial out to inform the host that it is busy. Marlin should only
send these messages out when busy, and preferably not when trying to
print formatted output.
9 years ago
80277cc9c8
drain_queued_commands_P now returns true if there are more
9 years ago
8fe7420310
Use a separate serial line buffer
9 years ago
7d25c107a8
Merge pull request #3149 from esenapaj/patch-1
...
suppress warnings
9 years ago
e8fa843c2d
Merge pull request #3164 from epatel/epatel/RCBugFix
...
Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z
9 years ago
d7c6fd5c2f
Merge pull request #3146 from thinkyhead/rc_enabled_true_false
...
Support "true" and "false" in the ENABLED macro
9 years ago
cb0dbfa3b5
Fix for #3160 MESH_BED_LEVELING broke correct G1 movement in Z
9 years ago
6e1bc03d3b
Additional wrapping for #3140
9 years ago
1c384930f3
Merge pull request #3140 from thinkyhead/rc_fix_macro_expansion
...
Wrap macros to prevent bad expansions
9 years ago
a4314c4907
Use local variable in recalc_delta_settings()
...
diagonal_rod hadn't been used anywhere.
9 years ago
8de7a6f9b1
suppress warnings
9 years ago
4b648793f2
Use ENABLED with DISABLE_[INACTIVE_][XYZ]
9 years ago
3f5fbbd398
Merge pull request #3124 from jbrazio/bugfix/update-g29-auto-level-bed-topography
...
Update the bed topography output done by G29
9 years ago
f9ded2a7c4
Wrap macros to prevent bad expansions
9 years ago
a645860431
All print timer related activity now uses print_job_start(), print_job_timer() or print_job_stop()
9 years ago
1981e53d68
M109 R option if misused could cause a wait-forever situation
9 years ago
4d4a842cfb
Update the bed topography output done by G29
9 years ago
793cd0ae3b
Clean up the code a bit
9 years ago
986b508ff7
Print timer now stops when it sees the last extruder temperature being shutdown
9 years ago
fd5414c6ea
Z_RAISE_BEFORE_HOMING -> MIN_Z_HEIGHT_FOR_HOMING
...
rebased
corrected spelling
changed to #elif for error
Still with MIN_Z_HEIGHT_FOR_HOMING but con be done with (folder wide) search-replace when we have a better name.
9 years ago
b7928a000a
Merge pull request #3108 from AnHardt/M110+
...
M110 and M29 rework
9 years ago
5cba0b4187
Merge pull request #3111 from thinkyhead/rc_drop_old_condition
...
Drop obsolete test for leading "N"
9 years ago
302d1bfbc4
Drop obsolete test for leading "N"
9 years ago
37b857e8ec
M110 ang M29 rework
...
Add 'ok' output for G29 actually closing the file.
Handle M110 when received without linenumber/checksumm.
9 years ago
fac85f6fa1
Merge pull request #3102 from jbrazio/bugfix-g28-multiple-z-movements
...
Bugfix: G28 was lifting Z-axis multiple times
9 years ago
642e3699ce
Z-axis was being lift multiple times if Z_SAFE_HOMING was enabled and Z_RAISE_BEFORE_HOMING was greater than zero
9 years ago
501f63802a
Merge pull request #3077 from Blue-Marlin/watchdogreset-in-kill
...
Add Watchdog timer reset in kill()
9 years ago
ef68c1910c
Check that the temperature is close to target
9 years ago
ea9fd1200b
Fix M109 so it won't wait for cooling
...
Addressing issue #2767
9 years ago
ff13070b59
Use _BV macros, patch up others
9 years ago
209f5f21e0
Use macros where possible
...
Apply `constrain`, `NOMORE`, `NOLESS` and `CRITICAL_SECTION` macros
wherever possible.
9 years ago
6e64895c30
Merge pull request #3001 from AlwaysTinkering/RCBugFix
...
Rc bug fix - Fix for issue #2931
9 years ago
34b8b9f0f5
Merge pull request #2995 from thinkyhead/rcbugfix_corexy_corexz
...
Add CORE support to st_get_position_mm (and elsewhere)
9 years ago
3a3d358df9
Fix Printrboard with LCD (redo)
...
Based on #2860 - rebased for RCBugFix
9 years ago
eb85342fd9
Merge pull request #2989 from AnHardt/fix2661
...
Pre home display - Stepper release
9 years ago
14f3ca1b2e
Merge pull request #2978 from thinkyhead/tool_offset_abl_rcbugfix
...
Apply bed leveling matrix when switching extruders
9 years ago
0fb507a75d
correct raise_z_for_servo
9 years ago
b4e5e0f11d
Add Watchdog reset in kill()
...
Add watchdog reset in the kill loop to simplify recovering.
9 years ago
222d13d5ed
Merge pull request #3051 from thinkyhead/rcbugfix_dual_axis_offset
...
Code cleanup in gcode_T
9 years ago
186629aee8
Merge pull request #3057 from jbrazio/3034-z_raise_after_probing_fix
...
Fix Z_RAISE_AFTER_PROBING for non DELTA printers
9 years ago
67e15aac3d
As pointed out by @Blue-Marlin the previous code would raise the Z axis
...
twice for a servo based probe.
9 years ago
17cc2a9663
Z_RAISE_AFTER_PROBING value was being ignored by Marlin because
...
raise_z_after_probing() was only called if the printer type was set to a
DELTA or if the printer had a docking sled for the probe.
9 years ago
1c889cd303
Refresh previous_cmd_ms during run_z_probe()
...
Refresh previous_cmd_ms during run_z_probe() to prevent:
stepper shutdown for expired DEFAULT_STEPPER_DEACTIVE_TIME
and extrudes for expired EXTRUDER_RUNOUT_SECONDS
(https://github.com/MarlinFirmware/MarlinDev/issues/238 )
9 years ago
4b02f33e69
Distribute config-changes to the other configurations
9 years ago
32ae9f9ab7
Fix stepper shutdown during waiting for temperatures
...
In the wait loops of M109 M190 idle() is called, what checks
stepper_inactive_time against previous_cmd_ms.
Because we can be several minutes inside the loop, resetting
previous_cmd_ms only outside the loop caused stepper shutdowns.
The name of previous_cmd_ms does not really reflect its use. It's set
not only when a new command was received or executed but also in many of
the movement routines. For that the little extension of using it during
the wait will (hopefully) not hurt.
# Conflicts:
# Marlin/Configuration_adv.h
9 years ago
b6e69e71ce
Make stepper shutdown after inactivity dependent
...
Make stepper shutdown after inactivity dependent on a new set of
#defines.
DISABLE_INACTIV_X
DISABLE_INACTIV_Y
DISABLE_INACTIV_Z
DISABLE_INACTIV_E
And make exemplaric Configuration.
Names can be discussed.
This makes the disabling of the steppers independent from the DISABLE_?
settings witch shut down the steppers immediately.
9 years ago
051325ccd7
Introduce axis_homed
...
Introduce additional variable axis_homed to replace axix_known_position
when the coordinate display should indicate the axis is not homed.
This is to distinguish between "not homed" and "inexact position possible
because stepper was disabled".
# Conflicts:
# Marlin/ultralcd_implementation_hitachi_HD44780.h
solved
9 years ago
100271e6ac
minor cleanup in gcode_T
9 years ago
6a4f06d35d
Fix GCode handling of spaces between command letter and first digit
9 years ago
ea8409ad5d
Fix: current_command_args contains command
...
@thinkyhead
Hi Scott,
your code from a0f362c@thinkyhead is great, but you forgot to skip the
command.
Symptom `M117 Test`shows `M117 Test` on LCD instead of `Test`.
see also
https://github.com/MarlinFirmware/Marlin/commit/a0f362c735401ebbcd95de3f
6f8e3c2f17ecc770 lines 941, 2851 and so on
Greetings and welcome back
Jochen
9 years ago
Scott Lahteine