microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Spacing, const, comments

Browse Source
2.0.x
Scott Lahteine 8 years ago
parent 7f0945d2b1
commit efc198f952
7 changed files with 73 additions and 104 deletions
Show Stats Download Patch File Download Diff File

2
Marlin/Conditionals_LCD.h
Unescape Escape View File

@ -243,7 +243,7 @@
/* Custom characters defined in the first 8 characters of the LCD */ /* Custom characters defined in the first 8 characters of the LCD */
#define LCD_BEDTEMP_CHAR 0x00 // Print only as a char. This will have 'unexpected' results when used in a string! #define LCD_BEDTEMP_CHAR 0x00 // Print only as a char. This will have 'unexpected' results when used in a string!
#define LCD_DEGREE_CHAR 0x01 #define LCD_DEGREE_CHAR 0x01
#define LCD_STR_THERMOMETER "\x02" // Too many places use preprocessor string concatination to change this to a char right now. #define LCD_STR_THERMOMETER "\x02" // Still used with string concatenation
#define LCD_UPLEVEL_CHAR 0x03 #define LCD_UPLEVEL_CHAR 0x03
#define LCD_REFRESH_CHAR 0x04 #define LCD_REFRESH_CHAR 0x04
#define LCD_STR_FOLDER "\x05" #define LCD_STR_FOLDER "\x05"

12
Marlin/Configuration_adv.h
Unescape Escape View File

@ -225,13 +225,11 @@
*/ */
//#define CASE_LIGHT_ENABLE //#define CASE_LIGHT_ENABLE
#if ENABLED(CASE_LIGHT_ENABLE) #if ENABLED(CASE_LIGHT_ENABLE)
#define CASE_LIGHT_PIN 4 // can be defined here or in the pins_XXX.h file for your board //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
// pins_XXX.h file overrides this one #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
#define INVERT_CASE_LIGHT false // set to true if case light is ON when pin is at 0 #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
#define CASE_LIGHT_DEFAULT_ON true // set default power up state to on or off #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // set power up brightness 0-255 ( only used if on PWM //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
// and if CASE_LIGHT_DEFAULT is set to on
//#define MENU_ITEM_CASE_LIGHT // Uncomment to have a Case Light entry in main menu
#endif #endif
//=========================================================================== //===========================================================================

72
Marlin/Marlin_main.cpp
Unescape Escape View File

@ -1394,7 +1394,7 @@ bool get_target_extruder_from_command(int code) {
* *
* Callers must sync the planner position after calling this! * Callers must sync the planner position after calling this!
*/ */
static void set_axis_is_at_home(AxisEnum axis) { static void set_axis_is_at_home(const AxisEnum axis) {
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) { if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR(">>> set_axis_is_at_home(", axis_codes[axis]); SERIAL_ECHOPAIR(">>> set_axis_is_at_home(", axis_codes[axis]);
@ -1496,7 +1496,7 @@ static void set_axis_is_at_home(AxisEnum axis) {
/** /**
* Some planner shorthand inline functions * Some planner shorthand inline functions
*/ */
inline float get_homing_bump_feedrate(AxisEnum axis) { inline float get_homing_bump_feedrate(const AxisEnum axis) {
int constexpr homing_bump_divisor[] = HOMING_BUMP_DIVISOR; int constexpr homing_bump_divisor[] = HOMING_BUMP_DIVISOR;
int hbd = homing_bump_divisor[axis]; int hbd = homing_bump_divisor[axis];
if (hbd < 1) { if (hbd < 1) {
@ -1507,20 +1507,19 @@ inline float get_homing_bump_feedrate(AxisEnum axis) {
return homing_feedrate_mm_s[axis] / hbd; return homing_feedrate_mm_s[axis] / hbd;
} }
// /**
// line_to_current_position * Move the planner to the current position from wherever it last moved
// Move the planner to the current position from wherever it last moved * (or from wherever it has been told it is located).
// (or from wherever it has been told it is located). */
//
inline void line_to_current_position() { inline void line_to_current_position() {
planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate_mm_s, active_extruder); planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate_mm_s, active_extruder);
} }
// /**
// line_to_destination * Move the planner to the position stored in the destination array, which is
// Move the planner, not necessarily synced with current_position * used by G0/G1/G2/G3/G5 and many other functions to set a destination.
// */
inline void line_to_destination(float fr_mm_s) { inline void line_to_destination(const float fr_mm_s) {
planner.buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], fr_mm_s, active_extruder); planner.buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], fr_mm_s, active_extruder);
} }
inline void line_to_destination() { line_to_destination(feedrate_mm_s); } inline void line_to_destination() { line_to_destination(feedrate_mm_s); }
@ -2751,7 +2750,7 @@ static void clean_up_after_endstop_or_probe_move() {
/** /**
* Home an individual linear axis * Home an individual linear axis
*/ */
static void do_homing_move(const AxisEnum axis, float distance, float fr_mm_s=0.0) { static void do_homing_move(const AxisEnum axis, const float distance, const float fr_mm_s=0.0) {
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) { if (DEBUGGING(LEVELING)) {
@ -4907,7 +4906,7 @@ void home_all_axes() { gcode_G28(true); }
if ( NEAR(current_position[X_AXIS], xProbe - (X_PROBE_OFFSET_FROM_EXTRUDER)) if ( NEAR(current_position[X_AXIS], xProbe - (X_PROBE_OFFSET_FROM_EXTRUDER))
&& NEAR(current_position[Y_AXIS], yProbe - (Y_PROBE_OFFSET_FROM_EXTRUDER)) && NEAR(current_position[Y_AXIS], yProbe - (Y_PROBE_OFFSET_FROM_EXTRUDER))
) { ) {
float simple_z = current_position[Z_AXIS] - measured_z; const float simple_z = current_position[Z_AXIS] - measured_z;
#if ENABLED(DEBUG_LEVELING_FEATURE) #if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) { if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("Z from Probe:", simple_z); SERIAL_ECHOPAIR("Z from Probe:", simple_z);
@ -7667,45 +7666,32 @@ void report_current_position() {
#ifdef M114_DETAIL #ifdef M114_DETAIL
static const char axis_char[XYZE] = {'X','Y','Z','E'}; void report_xyze(const float pos[XYZE], const uint8_t n = 4, const uint8_t precision = 3) {
void report_xyze(const float pos[XYZE], uint8_t n = 4, uint8_t precision = 3) {
char str[12]; char str[12];
for (uint8_t i = 0; i < n; i++) { for (uint8_t i = 0; i < n; i++) {
SERIAL_CHAR(' '); SERIAL_CHAR(' ');
SERIAL_CHAR(axis_char[i]); SERIAL_CHAR(axis_codes[i]);
SERIAL_CHAR(':'); SERIAL_CHAR(':');
SERIAL_PROTOCOL(dtostrf(pos[i], 8, precision, str)); SERIAL_PROTOCOL(dtostrf(pos[i], 8, precision, str));
} }
SERIAL_EOL; SERIAL_EOL;
} }
inline void report_xyz(const float pos[XYZ]) { inline void report_xyz(const float pos[XYZ]) { report_xyze(pos, 3); }
report_xyze(pos,3);
}
void report_current_position_detail() { void report_current_position_detail() {
stepper.synchronize(); stepper.synchronize();
SERIAL_EOL; SERIAL_PROTOCOLPGM("\nLogical:");
SERIAL_PROTOCOLPGM("Logical:");
report_xyze(current_position); report_xyze(current_position);
SERIAL_PROTOCOLPGM("Raw: "); SERIAL_PROTOCOLPGM("Raw: ");
const float raw[XYZ] = { const float raw[XYZ] = { RAW_X_POSITION(current_position[X_AXIS]), RAW_Y_POSITION(current_position[Y_AXIS]), RAW_Z_POSITION(current_position[Z_AXIS]) };
RAW_X_POSITION(current_position[X_AXIS]),
RAW_Y_POSITION(current_position[Y_AXIS]),
RAW_Z_POSITION(current_position[Z_AXIS])
};
report_xyz(raw); report_xyz(raw);
SERIAL_PROTOCOLPGM("Leveled:"); SERIAL_PROTOCOLPGM("Leveled:");
float leveled[XYZ] = { float leveled[XYZ] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] };
current_position[X_AXIS],
current_position[Y_AXIS],
current_position[Z_AXIS]
};
planner.apply_leveling(leveled); planner.apply_leveling(leveled);
report_xyz(leveled); report_xyz(leveled);
@ -7725,12 +7711,7 @@ void report_current_position() {
#endif #endif
SERIAL_PROTOCOLPGM("Stepper:"); SERIAL_PROTOCOLPGM("Stepper:");
const float step_count[XYZE] = { const float step_count[XYZE] = { stepper.position(X_AXIS), stepper.position(Y_AXIS), stepper.position(Z_AXIS), stepper.position(E_AXIS) };
(float)stepper.position(X_AXIS),
(float)stepper.position(Y_AXIS),
(float)stepper.position(Z_AXIS),
(float)stepper.position(E_AXIS)
};
report_xyze(step_count, 4, 0); report_xyze(step_count, 4, 0);
#if IS_SCARA #if IS_SCARA
@ -7744,12 +7725,7 @@ void report_current_position() {
SERIAL_PROTOCOLPGM("FromStp:"); SERIAL_PROTOCOLPGM("FromStp:");
get_cartesian_from_steppers(); // writes cartes[XYZ] (with forward kinematics) get_cartesian_from_steppers(); // writes cartes[XYZ] (with forward kinematics)
const float from_steppers[XYZE] = { const float from_steppers[XYZE] = { cartes[X_AXIS], cartes[Y_AXIS], cartes[Z_AXIS], stepper.get_axis_position_mm(E_AXIS) };
cartes[X_AXIS],
cartes[Y_AXIS],
cartes[Z_AXIS],
stepper.get_axis_position_mm(E_AXIS)
};
report_xyze(from_steppers); report_xyze(from_steppers);
const float diff[XYZE] = { const float diff[XYZE] = {
@ -7764,7 +7740,7 @@ void report_current_position() {
#endif // M114_DETAIL #endif // M114_DETAIL
/** /**
* M114: Output current position to serial port * M114: Report current position to host
*/ */
inline void gcode_M114() { inline void gcode_M114() {
@ -7859,9 +7835,7 @@ inline void gcode_M115() {
/** /**
* M117: Set LCD Status Message * M117: Set LCD Status Message
*/ */
inline void gcode_M117() { inline void gcode_M117() { lcd_setstatus(parser.string_arg); }
lcd_setstatus(parser.string_arg);
}
/** /**
* M119: Output endstop states to serial output * M119: Output endstop states to serial output

2
Marlin/buzzer.h
Unescape Escape View File

@ -104,7 +104,7 @@ class Buzzer {
* @param duration Duration of the tone in milliseconds * @param duration Duration of the tone in milliseconds
* @param frequency Frequency of the tone in hertz * @param frequency Frequency of the tone in hertz
*/ */
void tone(uint16_t const &duration, uint16_t const &frequency = 0) { void tone(const uint16_t &duration, const uint16_t &frequency = 0) {
while (buffer.isFull()) { while (buffer.isFull()) {
this->tick(); this->tick();
thermalManager.manage_heater(); thermalManager.manage_heater();

4
Marlin/configuration_store.cpp
Unescape Escape View File

@ -457,10 +457,10 @@ void MarlinSettings::postprocess() {
#endif #endif
#if DISABLED(ULTIPANEL) #if DISABLED(ULTIPANEL)
const int lcd_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND }, constexpr int lcd_preheat_hotend_temp[2] = { PREHEAT_1_TEMP_HOTEND, PREHEAT_2_TEMP_HOTEND },
lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED }, lcd_preheat_bed_temp[2] = { PREHEAT_1_TEMP_BED, PREHEAT_2_TEMP_BED },
lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED }; lcd_preheat_fan_speed[2] = { PREHEAT_1_FAN_SPEED, PREHEAT_2_FAN_SPEED };
#endif // !ULTIPANEL #endif
EEPROM_WRITE(lcd_preheat_hotend_temp); EEPROM_WRITE(lcd_preheat_hotend_temp);
EEPROM_WRITE(lcd_preheat_bed_temp); EEPROM_WRITE(lcd_preheat_bed_temp);

27
Marlin/ultralcd_impl_HD44780.h
Unescape Escape View File

@ -193,17 +193,18 @@ extern volatile uint8_t buttons; //an extended version of the last checked butt
static void lcd_implementation_update_indicators(); static void lcd_implementation_update_indicators();
#endif #endif
static void createChar_P(const char c, const byte * const ptr) {
static void createChar_P(char c, PROGMEM byte *ptr) {
byte temp[8]; byte temp[8];
int8_t i; for (uint8_t i = 0; i < 8; i++)
for(i=0; i<8; i++) {
temp[i] = pgm_read_byte(&ptr[i]); temp[i] = pgm_read_byte(&ptr[i]);
}
lcd.createChar(c, temp); lcd.createChar(c, temp);
} }
static void lcd_set_custom_characters(
#if ENABLED(LCD_PROGRESS_BAR)
const bool info_screen_charset = true
#endif
) {
const static PROGMEM byte bedTemp[8] = { const static PROGMEM byte bedTemp[8] = {
B00000, B00000,
B11111, B11111,
@ -324,12 +325,6 @@ const static PROGMEM byte clock[8] = {
#endif #endif
#endif #endif
static void lcd_set_custom_characters(
#if ENABLED(LCD_PROGRESS_BAR)
const bool info_screen_charset = true
#endif
) {
createChar_P(LCD_BEDTEMP_CHAR, bedTemp); createChar_P(LCD_BEDTEMP_CHAR, bedTemp);
createChar_P(LCD_DEGREE_CHAR, degree); createChar_P(LCD_DEGREE_CHAR, degree);
createChar_P(LCD_STR_THERMOMETER[0], thermometer); createChar_P(LCD_STR_THERMOMETER[0], thermometer);
@ -638,10 +633,12 @@ FORCE_INLINE void _draw_heater_status(const int8_t heater, const char prefix, co
#if ENABLED(LCD_PROGRESS_BAR) #if ENABLED(LCD_PROGRESS_BAR)
inline void lcd_draw_progress_bar(const uint8_t percent) { inline void lcd_draw_progress_bar(const uint8_t percent) {
int tix = (int)(percent * (LCD_WIDTH) * 3) / 100, const int tix = (int)(percent * (LCD_WIDTH) * 3) / 100,
cel = tix / 3, rem = tix % 3, i = LCD_WIDTH; cel = tix / 3,
rem = tix % 3;
uint8_t i = LCD_WIDTH;
char msg[LCD_WIDTH + 1], b = ' '; char msg[LCD_WIDTH + 1], b = ' ';
msg[i] = '\0'; msg[LCD_WIDTH] = '\0';
while (i--) { while (i--) {
if (i == cel - 1) if (i == cel - 1)
b = LCD_STR_PROGRESS[2]; b = LCD_STR_PROGRESS[2];

Write Preview
Loading…
Cancel
Save