- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1710,8 +1722,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1710,8 +1722,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1730,8 +1742,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1710,8 +1722,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1869,8 +1881,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1718,8 +1730,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1705,8 +1717,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1701,8 +1713,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1711,8 +1723,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1701,8 +1713,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1709,8 +1721,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1720,7 +1732,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_STDDEV_FILAMENT_DIA 0.05 // Typical estimate for cheap filament
#define DEFAULT_STDDEV_FILAMENT_DIA 0.05 // Typical estimate for cheap filament
//#define DEFAULT_STDDEV_FILAMENT_DIA 0.02 // Typical advertised for higher quality filament
//#define DEFAULT_STDDEV_FILAMENT_DIA 0.02 // Typical advertised for higher quality filament
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1692,8 +1704,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1692,8 +1704,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1707,8 +1719,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1725,8 +1737,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1710,8 +1722,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1714,8 +1726,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1738,8 +1750,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1714,8 +1726,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1714,8 +1726,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1685,8 +1697,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1710,8 +1722,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1710,8 +1722,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1722,8 +1734,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1713,8 +1725,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1741,8 +1753,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1766,8 +1778,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1711,8 +1723,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1745,8 +1757,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1710,8 +1722,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1710,8 +1722,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1710,8 +1722,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1844,8 +1856,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1837,8 +1849,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1832,8 +1844,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1835,8 +1847,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1835,8 +1847,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1844,8 +1856,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
/**
/**
*FilamentWidthSensor
*FilamentWidthSensor
*
*
@ -1724,8 +1736,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1713,8 +1725,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1705,8 +1717,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#define DEFAULT_NOZZLE_SIZE .4 // (mm) Diameter of primary nozzle. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_LAYER_HEIGHT .2 // (mm) Default layer height that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_HOTEND_TEMP 205.0 // (c) Default nozzle temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
#define DEFAULT_BED_TEMP 60.0 // (c) Default bed temperature that will produce usable results by the printer. Used by G26 Mesh Validation Pattern tool.
// Servo deactivation
// Servo deactivation
//
//
// With this option servos are powered only during movement, then turned off to prevent jitter.
// With this option servos are powered only during movement, then turned off to prevent jitter.
@ -1715,8 +1727,6 @@
*/
*/
//#define FILAMENT_WIDTH_SENSOR
//#define FILAMENT_WIDTH_SENSOR
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.00 // (mm) Diameter of the filament generally used (3.0 or 1.75mm), also used in the slicer. Used to validate sensor reading.
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor (0,1,2,3)
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
#define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber