Add 4 new LCD displays

7 years ago · e9bcb9d048
parent e31385ecf6
commit e9bcb9d048
43 changed files with 1341 additions and 157 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -962,7 +961,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1236,9 +1235,8 @@
 * SD CARD: SPI SPEED
 *
 * Enable one of the following items for a slower SPI transfer speed.
- * This may be required to resolve "volume init" errors or LCD issues.
+ * This may be required to resolve "volume init" errors.
 */
 //#define SPI_SPEED SPI_HALF_SPEED
 //#define SPI_SPEED SPI_QUARTER_SPEED
 //#define SPI_SPEED SPI_EIGHTH_SPEED
@ -1505,6 +1503,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/default/Configuration.h
+++ b/Marlin/src/config/default/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -962,7 +961,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1504,6 +1503,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -982,7 +981,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1524,6 +1523,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
+++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -962,7 +961,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1504,6 +1503,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Anet/A6/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -1105,7 +1104,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1663,6 +1662,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Anet/A8/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -968,7 +967,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1512,6 +1511,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -953,7 +952,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1495,6 +1494,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
@ -90,7 +90,6 @@
 // example configuration folder.
 //
 #define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -762,6 +761,8 @@
 // @section homing
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 #define Z_HOMING_HEIGHT 5    // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                             // Be sure you have this distance over your Z_MAX_POS in case.
@ -961,7 +962,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1503,6 +1504,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -953,7 +952,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1495,6 +1494,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Cartesio/Configuration.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 #define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -961,7 +960,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1503,6 +1502,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 #define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -1392,7 +1391,7 @@
 // RepRapDiscount FULL GRAPHIC Smart Controller
 // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
 //
-#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 //
 // MakerLab Mini Panel with graphic
@ -1514,6 +1513,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 #define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Felix/Configuration.h
+++ b/Marlin/src/config/examples/Felix/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -944,7 +943,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1486,6 +1485,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h
+++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -944,7 +943,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1486,6 +1485,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Folger
+++ b/Marlin/src/config/examples/Folger
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -764,6 +763,8 @@
 // @section homing
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 #define Z_HOMING_HEIGHT 2    // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                             // Be sure you have this distance over your Z_MAX_POS in case.
@ -965,7 +966,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1507,6 +1508,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
@ -37,7 +37,7 @@
 */
 #ifndef CONFIGURATION_H
 #define CONFIGURATION_H
-#define CONFIGURATION_H_VERSION 010100
+#define CONFIGURATION_H_VERSION 020000
 //===========================================================================
 //============================= Getting Started =============================
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -977,7 +976,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1519,6 +1518,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@ -37,7 +37,7 @@
 */
 #ifndef CONFIGURATION_H
 #define CONFIGURATION_H
-#define CONFIGURATION_H_VERSION 010100
+#define CONFIGURATION_H_VERSION 020000
 //===========================================================================
 //============================= Getting Started =============================
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -761,6 +760,8 @@
 // @section homing
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 #define Z_HOMING_HEIGHT 8  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                             // Be sure you have this distance over your Z_MAX_POS in case.
@ -960,7 +961,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1502,6 +1503,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -966,7 +965,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1508,6 +1507,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Malyan/M150/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h
@ -96,7 +96,6 @@
 // example configuration folder.
 //
 #define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -990,7 +989,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1532,6 +1531,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -962,7 +961,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1504,6 +1503,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/RigidBot/Configuration.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -960,7 +959,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1504,6 +1503,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/SCARA/Configuration.h
+++ b/Marlin/src/config/examples/SCARA/Configuration.h
@ -121,7 +121,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -974,7 +973,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1516,6 +1515,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Sanguinololu/Configuration.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h
@ -37,7 +37,7 @@
 */
 #ifndef CONFIGURATION_H
 #define CONFIGURATION_H
-#define CONFIGURATION_H_VERSION 010100
+#define CONFIGURATION_H_VERSION 020000
 //===========================================================================
 //============================= Getting Started =============================
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -792,6 +791,8 @@
 // @section homing
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 #define Z_HOMING_HEIGHT 4    // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                             // Be sure you have this distance over your Z_MAX_POS in case.
@ -991,7 +992,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1533,6 +1534,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/TinyBoy2/Configuration.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h
@ -107,7 +107,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -1018,7 +1017,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1560,6 +1559,35 @@
 //
 #define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
@ -107,7 +107,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -789,6 +788,9 @@
 #define INVERT_E4_DIR true
 // @section homing
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 // K8200: it is usual to have clamps for the glass plate on the heatbed
 #define Z_HOMING_HEIGHT 4   // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                            // Be sure you have this distance over your Z_MAX_POS in case.
@ -989,7 +991,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1534,6 +1536,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 #endif // K8200_VM8201
 //=============================================================================
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -962,7 +961,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1504,6 +1503,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -962,7 +961,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1504,6 +1503,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
+++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -962,7 +961,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1504,6 +1503,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -885,6 +884,8 @@
 // @section homing
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 #define Z_HOMING_HEIGHT 15   // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                             // Be sure you have this distance over your Z_MAX_POS in case.
@ -1088,7 +1089,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1630,6 +1631,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -885,6 +884,8 @@
 // @section homing
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 #define Z_HOMING_HEIGHT 15   // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                             // Be sure you have this distance over your Z_MAX_POS in case.
@ -1082,7 +1083,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1623,6 +1624,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/delta/generic/Configuration.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -1079,7 +1078,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1620,6 +1619,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -1082,7 +1081,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1623,6 +1622,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
@ -95,7 +95,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -1082,7 +1081,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1623,6 +1622,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -1091,7 +1090,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1632,6 +1631,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 #define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -774,6 +773,8 @@
 // @section homing
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 #define Z_HOMING_HEIGHT 10   // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                             // Be sure you have this distance over your Z_MAX_POS in case.
@ -974,7 +975,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1516,6 +1517,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/makibox/Configuration.h
+++ b/Marlin/src/config/examples/makibox/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -965,7 +964,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1507,6 +1506,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h
+++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
@ -59,14 +59,14 @@
 //============================= DELTA Printer ===============================
 //===========================================================================
 // For a Delta printer start with one of the configuration files in the
-// example_configurations/delta directory and customize for your machine.
+// config/examples/delta directory and customize for your machine.
 //
 //===========================================================================
 //============================= SCARA Printer ===============================
 //===========================================================================
 // For a SCARA printer start with the configuration files in
-// example_configurations/SCARA and customize for your machine.
+// config/examples/SCARA and customize for your machine.
 //
 // @section info
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -957,7 +956,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1499,6 +1498,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/config/examples/wt150/Configuration.h
+++ b/Marlin/src/config/examples/wt150/Configuration.h
@ -91,7 +91,6 @@
 // example configuration folder.
 //
 //#define SHOW_CUSTOM_BOOTSCREEN
 // @section machine
 /**
@ -967,7 +966,7 @@
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 /**
 * Commands to execute at the end of G29 probing.
@ -1509,6 +1508,35 @@
 //
 //#define OLED_PANEL_TINYBOY2
 //
 // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
 // https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
 //
 //#define MKS_MINI_12864
 //
 // Factory display for Creality CR-10
 // https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
 //
 // This is RAMPS-compatible using a single 10-pin connector.
 // (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
 //
 //#define CR10_STOCKDISPLAY
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
 //
 //#define MKS_12864OLED
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@ -40,17 +40,8 @@
  #elif ENABLED(MAKRPANEL)
    #define DOGLCD
    #define ULTIPANEL
    #define DEFAULT_LCD_CONTRAST 17
    #define U8GLIB_ST7565_64128N
  #elif ENABLED(MINIPANEL)
    #define DOGLCD
    #define ULTIPANEL
    #define DEFAULT_LCD_CONTRAST 17
  #elif ENABLED(ANET_KEYPAD_LCD)
    #define REPRAPWORLD_KEYPAD
@ -116,6 +107,34 @@
    #define U8GLIB_ST7920
    #define ULTIPANEL
  #elif ENABLED(CR10_STOCKDISPLAY)
    #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
    #ifndef ST7920_DELAY_1
      #define ST7920_DELAY_1 DELAY_2_NOP
    #endif
    #ifndef ST7920_DELAY_2
      #define ST7920_DELAY_2 DELAY_2_NOP
    #endif
    #ifndef ST7920_DELAY_3
      #define ST7920_DELAY_3 DELAY_2_NOP
    #endif
  #elif ENABLED(MKS_12864OLED)
    #define REPRAP_DISCOUNT_SMART_CONTROLLER
    #define U8GLIB_SH1106
  #elif ENABLED(MKS_MINI_12864)
    #define MINIPANEL
  #endif
  #if ENABLED(MAKRPANEL) || ENABLED(MINIPANEL)
    #define DOGLCD
    #define ULTIPANEL
    #define DEFAULT_LCD_CONTRAST 17
  #endif
  // Generic support for SSD1306 / SH1106 OLED based LCDs.
@ -125,7 +144,15 @@
  #endif
  #if ENABLED(PANEL_ONE) || ENABLED(U8GLIB_SH1106)
    #define ULTIMAKERCONTROLLER
  #elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
    #define REPRAP_DISCOUNT_SMART_CONTROLLER
    #define LCD_WIDTH 16
    #define LCD_HEIGHT 2
  #endif
  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(LCD_FOR_MELZI)
@ -249,8 +276,7 @@
    #ifndef LCD_HEIGHT
      #define LCD_HEIGHT 4
    #endif
-  #else // no panel but just LCD
+  #elif ENABLED(ULTRA_LCD)  // no panel but just LCD
    #if ENABLED(ULTRA_LCD)
    #ifndef LCD_WIDTH
      #define LCD_WIDTH 16
    #endif
@ -258,7 +284,6 @@
      #define LCD_HEIGHT 2
    #endif
  #endif
  #endif
  #if ENABLED(DOGLCD)
    /* Custom characters defined in font dogm_font_data_Marlin_symbols.h / Marlin_symbols.fon */
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@ -1137,6 +1137,7 @@ static_assert(1 >= 0
 * Note: BQ_LCD_SMART_CONTROLLER => REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 *       REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER => REPRAP_DISCOUNT_SMART_CONTROLLER
 *       SAV_3DGLCD => U8GLIB_SH1106 => ULTIMAKERCONTROLLER
 *       MKS_12864OLED => U8GLIB_SH1106 => ULTIMAKERCONTROLLER
 *       miniVIKI => ULTIMAKERCONTROLLER
 *       VIKI2 => ULTIMAKERCONTROLLER
 *       ELB_FULL_GRAPHIC_CONTROLLER => ULTIMAKERCONTROLLER
@ -1144,19 +1145,34 @@ static_assert(1 >= 0
 */
 static_assert(1 >= 0
  #if ENABLED(ULTIMAKERCONTROLLER) \
-      && DISABLED(SAV_3DGLCD) && DISABLED(miniVIKI) && DISABLED(VIKI2) \
+      && DISABLED(SAV_3DGLCD) \
-      && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER) && DISABLED(PANEL_ONE)
+      && DISABLED(miniVIKI) \
      && DISABLED(VIKI2) \
      && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
      && DISABLED(PANEL_ONE) \
      && DISABLED(MKS_12864OLED)
    + 1
  #endif
-  #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(LCD_FOR_MELZI)
+  #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
      && DISABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) \
      && DISABLED(LCD_FOR_MELZI) \
      && DISABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \
      && DISABLED(MKS_12864OLED)
    + 1
  #endif
-  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(BQ_LCD_SMART_CONTROLLER)
+  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) \
      && DISABLED(BQ_LCD_SMART_CONTROLLER)
    + 1
  #endif
  #if ENABLED(LCD_FOR_MELZI)
    + 1
  #endif
  #if ENABLED(MKS_12864OLED)
    + 1
  #endif
  #if ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
    + 1
  #endif
  #if ENABLED(CARTESIO_UI)
    + 1
  #endif
@ -1181,10 +1197,15 @@ static_assert(1 >= 0
  #if ENABLED(G3D_PANEL)
    + 1
  #endif
-  #if ENABLED(MINIPANEL)
+  #if ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864)
    + 1
  #endif
  #if ENABLED(MKS_MINI_12864)
    + 1
  #endif
-  #if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(CARTESIO_UI) && DISABLED(ANET_KEYPAD_LCD)
+  #if ENABLED(REPRAPWORLD_KEYPAD) \
      && DISABLED(CARTESIO_UI) \
      && DISABLED(ANET_KEYPAD_LCD)
    + 1
  #endif
  #if ENABLED(RIGIDBOT_PANEL)
@ -1286,6 +1307,16 @@ static_assert(1 >= 0
  #error "HAVE_L6470DRIVER requires at least one L6470 stepper to be set."
 #endif
 /**
 * Digipot requirement
 */
 #if ENABLED(DIGIPOT_MCP4018)
  #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \
    || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1)
      #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined."
  #endif
 #endif
 /**
 * Require 4 or more elements in per-axis initializers
 */
--- a/Marlin/src/lcd/dogm/ultralcd_st7565_u8glib_VIKI.h
+++ b/Marlin/src/lcd/dogm/ultralcd_st7565_u8glib_VIKI.h
@ -27,17 +27,11 @@
 #if ENABLED(U8GLIB_ST7565_64128N)
 #define ST7565_CLK_PIN  DOGLCD_SCK
 #define ST7565_DAT_PIN  DOGLCD_MOSI
 #define ST7565_CS_PIN   DOGLCD_CS
 #define ST7565_A0_PIN   DOGLCD_A0
 #include <U8glib.h>
 #define WIDTH 128
--- a/Marlin/src/lcd/ultralcd_impl_DOGM.h
+++ b/Marlin/src/lcd/ultralcd_impl_DOGM.h
@ -192,6 +192,10 @@
  // Generic support for SSD1306 OLED I2C LCDs
  //U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST);  // 8 stripes
  U8GLIB_SSD1306_128X64_2X u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST); // 4 stripes
 #elif ENABLED(MKS_12864OLED)
  // MKS 128x64 (SH1106) OLED I2C LCD
  U8GLIB_SH1106_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0);      // 8 stripes
  //U8GLIB_SH1106_128X64_2X u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0); // 4 stripes
 #elif ENABLED(U8GLIB_SH1106)
  // Generic support for SH1106 OLED I2C LCDs
  //U8GLIB_SH1106_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_FAST);  // 8 stripes
--- a/Marlin/src/pins/pins_RAMPS.h
+++ b/Marlin/src/pins/pins_RAMPS.h
@ -63,7 +63,7 @@
 //
 // Servos
 //
-#if ENABLED(IS_RAMPS_13)
+#ifdef IS_RAMPS_13
  #define SERVO0_PIN        7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI
 #else
  #define SERVO0_PIN       11
@ -243,35 +243,79 @@
 //
 // Průša i3 MK2 Multiplexer Support
 //
 #ifndef E_MUX0_PIN
  #define E_MUX0_PIN 40   // Z_CS_PIN
 #endif
 #ifndef E_MUX1_PIN
  #define E_MUX1_PIN 42   // E0_CS_PIN
 #endif
 #ifndef E_MUX2_PIN
  #define E_MUX2_PIN 44   // E1_CS_PIN
 #endif
 //////////////////////////
 // LCDs and Controllers //
 //////////////////////////
 //
 // LCD / Controller
 //
 #if ENABLED(ULTRA_LCD)
  //
  // LCD Display output pins
  //
  #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
    #define LCD_PINS_RS         49 // CS chip select /SS chip slave select
    #define LCD_PINS_ENABLE     51 // SID (MOSI)
    #define LCD_PINS_D4         52 // SCK (CLK) clock
  #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
    #define LCD_PINS_RS         40
    #define LCD_PINS_ENABLE     42
    #define LCD_PINS_D4         65
    #define LCD_PINS_D5         66
    #define LCD_PINS_D6         44
    #define LCD_PINS_D7         64
  #else
    #if ENABLED(CR10_STOCKDISPLAY)
      #define LCD_PINS_RS       27
      #define LCD_PINS_ENABLE   29
      #define LCD_PINS_D4       25
      #if DISABLED(NEWPANEL)
        #define BEEPER_PIN      37
      #endif
    #else
      #if ENABLED(MKS_12864OLED)
        #define LCD_PINS_DC     25 // Set as output on init
        #define LCD_PINS_RS     27 // Pull low for 1s to init
        // DOGM SPI LCD Support
        #define DOGLCD_CS       16
        #define DOGLCD_MOSI     17
        #define DOGLCD_SCK      23
        #define DOGLCD_A0       LCD_PINS_DC
      #else
        #define LCD_PINS_RS     16
        #define LCD_PINS_ENABLE 17
        #define LCD_PINS_D4     23
        #define LCD_PINS_D5     25
        #define LCD_PINS_D6     27
      #endif
      #define LCD_PINS_D7       29
      #if DISABLED(NEWPANEL)
        #define BEEPER_PIN      33
      #endif
    #endif
    #if DISABLED(NEWPANEL)
      // Buttons are attached to a shift register
      // Not wired yet
      //#define SHIFT_CLK       38
@ -279,18 +323,27 @@
      //#define SHIFT_OUT       40
      //#define SHIFT_EN        17
    #endif
  #endif
  //
  // LCD Display input pins
  //
  #if ENABLED(NEWPANEL)
    #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
      #define BEEPER_PIN        37
      #if ENABLED(CR10_STOCKDISPLAY)
        #define BTN_EN1         17
        #define BTN_EN2         23
      #else
        #define BTN_EN1         31
        #define BTN_EN2         33
-      #define BTN_ENC           35
+      #endif
      #define BTN_ENC           35
      #define SD_DETECT_PIN     49
      #define KILL_PIN          41
@ -311,85 +364,112 @@
      #define BTN_EN2           43
      #define BTN_ENC           32
      #define LCD_SDSS          53
      #define SD_DETECT_PIN     -1
      #define KILL_PIN          41
    #elif ENABLED(LCD_I2C_VIKI)
      #define BTN_EN1           22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
      #define BTN_EN2            7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
      #define BTN_ENC           -1
      #define LCD_SDSS          53
      #define SD_DETECT_PIN     49
    #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
      #define BEEPER_PIN        33
      // Pins for DOGM SPI LCD Support
      #define DOGLCD_A0         44
      #define DOGLCD_CS         45
      #define DOGLCD_A0         44
      #define LCD_SCREEN_ROT_180
      #define BEEPER_PIN        33
      #define STAT_LED_RED_PIN  32
      #define STAT_LED_BLUE_PIN 35
      #define BTN_EN1           22
      #define BTN_EN2            7
      #define BTN_ENC           39
      #define SDSS              53
      #define SD_DETECT_PIN     -1 // Pin 49 for display sd interface, 72 for easy adapter board
      #define KILL_PIN          31
      #define STAT_LED_RED_PIN  32
      #define STAT_LED_BLUE_PIN 35
    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
      #define DOGLCD_CS         29
      #define DOGLCD_A0         27
      #define BEEPER_PIN        23
      #define LCD_BACKLIGHT_PIN 33
      #define BTN_EN1           35
      #define BTN_EN2           37
      #define BTN_ENC           31
-      #define SD_DETECT_PIN     49
+
      #define LCD_SDSS          53
      #define SD_DETECT_PIN     49
      #define KILL_PIN          41
-      #define BEEPER_PIN        23
+
-      #define DOGLCD_CS         29
+    #elif ENABLED(MKS_MINI_12864)  // Added in Marlin 1.1.6
      #define DOGLCD_A0         27
-      #define LCD_BACKLIGHT_PIN 33
+      #define DOGLCD_CS         25
      // GLCD features
      //#define LCD_CONTRAST   190
      // Uncomment screen orientation
      //#define LCD_SCREEN_ROT_90
      //#define LCD_SCREEN_ROT_180
      //#define LCD_SCREEN_ROT_270
      #define BEEPER_PIN        37
      // not connected to a pin
      #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
      #define BTN_EN1           31
      #define BTN_EN2           33
      #define BTN_ENC           35
      #define SDSS              53
      #define SD_DETECT_PIN     49
      #define KILL_PIN          64
    #elif ENABLED(MINIPANEL)
      #define BEEPER_PIN        42
-      // Pins for DOGM SPI LCD Support
+      // not connected to a pin
      #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
      #define DOGLCD_A0         44
      #define DOGLCD_CS         66
      #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
      #define SDSS              53
      #define KILL_PIN          64
      // GLCD features
      //#define LCD_CONTRAST   190
      // Uncomment screen orientation
      //#define LCD_SCREEN_ROT_90
      //#define LCD_SCREEN_ROT_180
      //#define LCD_SCREEN_ROT_270
-      // The encoder and click button
+
      #define BTN_EN1           40
      #define BTN_EN2           63
      #define BTN_ENC           59
-      // not connected to a pin
+
      #define SDSS              53
      #define SD_DETECT_PIN     49
      #define KILL_PIN          64
    #else
      // Beeper on AUX-4
      #define BEEPER_PIN        33
-      // buttons are directly attached using AUX-2
+      // Buttons are directly attached using AUX-2
      #if ENABLED(REPRAPWORLD_KEYPAD)
        #define BTN_EN1         64
        #define BTN_EN2         59
        #define BTN_ENC         63
        #define SHIFT_OUT       40
        #define SHIFT_CLK       44
        #define SHIFT_LD        42
        #define BTN_EN1         64
        #define BTN_EN2         59
        #define BTN_ENC         63
      #elif ENABLED(PANEL_ONE)
        #define BTN_EN1         59 // AUX2 PIN 3
        #define BTN_EN2         63 // AUX2 PIN 4
@ -403,8 +483,6 @@
      #if ENABLED(G3D_PANEL)
        #define SD_DETECT_PIN   49
        #define KILL_PIN        41
      #else
        //#define SD_DETECT_PIN -1 // Ramps doesn't use this
      #endif
    #endif