|
|
|
|
@ -32,6 +32,10 @@
|
|
|
|
|
#include "../libs/duration_t.h"
|
|
|
|
|
#include "../gcode/gcode.h"
|
|
|
|
|
|
|
|
|
|
#if ENABLED(TMC_DEBUG)
|
|
|
|
|
#include "../module/planner.h"
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
bool report_tmc_status = false;
|
|
|
|
|
char extended_axis_codes[11][3] = { "X", "X2", "Y", "Y2", "Z", "Z2", "E0", "E1", "E2", "E3", "E4" };
|
|
|
|
|
|
|
|
|
|
@ -92,20 +96,20 @@ char extended_axis_codes[11][3] = { "X", "X2", "Y", "Y2", "Z", "Z2", "E0", "E1",
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
template<typename TMC>
|
|
|
|
|
uint8_t monitor_tmc_driver(TMC &st, const char axisID, uint8_t otpw_cnt) {
|
|
|
|
|
void monitor_tmc_driver(TMC &st, const char axisID, uint8_t &otpw_cnt) {
|
|
|
|
|
TMC_driver_data data = get_driver_data(st);
|
|
|
|
|
|
|
|
|
|
#if ENABLED(STOP_ON_ERROR)
|
|
|
|
|
if (data.is_error) {
|
|
|
|
|
SERIAL_EOL();
|
|
|
|
|
SERIAL_ECHO(axisID);
|
|
|
|
|
SERIAL_ECHO(" driver error detected:");
|
|
|
|
|
if (data.is_ot) SERIAL_ECHO("\novertemperature");
|
|
|
|
|
if (st.s2ga()) SERIAL_ECHO("\nshort to ground (coil A)");
|
|
|
|
|
if (st.s2gb()) SERIAL_ECHO("\nshort to ground (coil B)");
|
|
|
|
|
SERIAL_ECHOPGM(" driver error detected:");
|
|
|
|
|
if (data.is_ot) SERIAL_ECHOPGM("\novertemperature");
|
|
|
|
|
if (st.s2ga()) SERIAL_ECHOPGM("\nshort to ground (coil A)");
|
|
|
|
|
if (st.s2gb()) SERIAL_ECHOPGM("\nshort to ground (coil B)");
|
|
|
|
|
SERIAL_EOL();
|
|
|
|
|
#if ENABLED(TMC_DEBUG)
|
|
|
|
|
_M122();
|
|
|
|
|
tmc_report_all();
|
|
|
|
|
#endif
|
|
|
|
|
kill(PSTR("Driver error"));
|
|
|
|
|
}
|
|
|
|
|
@ -123,7 +127,7 @@ char extended_axis_codes[11][3] = { "X", "X2", "Y", "Y2", "Z", "Z2", "E0", "E1",
|
|
|
|
|
SERIAL_ECHO(axisID);
|
|
|
|
|
SERIAL_ECHOPGM(" driver overtemperature warning! (");
|
|
|
|
|
SERIAL_ECHO(st.getCurrent());
|
|
|
|
|
SERIAL_ECHOLN("mA)");
|
|
|
|
|
SERIAL_ECHOLNPGM("mA)");
|
|
|
|
|
}
|
|
|
|
|
#if CURRENT_STEP_DOWN > 0
|
|
|
|
|
// Decrease current if is_otpw is true and driver is enabled and there's been more then 4 warnings
|
|
|
|
|
@ -146,17 +150,15 @@ char extended_axis_codes[11][3] = { "X", "X2", "Y", "Y2", "Z", "Z2", "E0", "E1",
|
|
|
|
|
const uint32_t pwm_scale = get_pwm_scale(st);
|
|
|
|
|
SERIAL_ECHO(axisID);
|
|
|
|
|
SERIAL_ECHOPAIR(":", pwm_scale);
|
|
|
|
|
SERIAL_ECHO(" |0b"); SERIAL_PRINT(get_status_response(st), BIN);
|
|
|
|
|
SERIAL_ECHO("| ");
|
|
|
|
|
if (data.is_error) SERIAL_ECHO('E');
|
|
|
|
|
else if (data.is_ot) SERIAL_ECHO('O');
|
|
|
|
|
else if (data.is_otpw) SERIAL_ECHO('W');
|
|
|
|
|
SERIAL_ECHOPGM(" |0b"); MYSERIAL0.print(get_status_response(st), BIN);
|
|
|
|
|
SERIAL_ECHOPGM("| ");
|
|
|
|
|
if (data.is_error) SERIAL_CHAR('E');
|
|
|
|
|
else if (data.is_ot) SERIAL_CHAR('O');
|
|
|
|
|
else if (data.is_otpw) SERIAL_CHAR('W');
|
|
|
|
|
else if (otpw_cnt > 0) SERIAL_PRINT(otpw_cnt, DEC);
|
|
|
|
|
else if (st.flag_otpw) SERIAL_ECHO('F');
|
|
|
|
|
SERIAL_ECHO("\t");
|
|
|
|
|
else if (st.flag_otpw) SERIAL_CHAR('F');
|
|
|
|
|
SERIAL_CHAR('\t');
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return otpw_cnt;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#define HAS_HW_COMMS(ST) ENABLED(ST##_IS_TMC2130)|| (ENABLED(ST##_IS_TMC2208) && defined(ST##_HARDWARE_SERIAL))
|
|
|
|
|
@ -167,47 +169,47 @@ char extended_axis_codes[11][3] = { "X", "X2", "Y", "Y2", "Z", "Z2", "E0", "E1",
|
|
|
|
|
next_cOT = millis() + 500;
|
|
|
|
|
#if HAS_HW_COMMS(X) || ENABLED(IS_TRAMS)
|
|
|
|
|
static uint8_t x_otpw_cnt = 0;
|
|
|
|
|
x_otpw_cnt = monitor_tmc_driver(stepperX, axis_codes[X_AXIS], x_otpw_cnt);
|
|
|
|
|
monitor_tmc_driver(stepperX, axis_codes[X_AXIS], x_otpw_cnt);
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_HW_COMMS(Y) || ENABLED(IS_TRAMS)
|
|
|
|
|
static uint8_t y_otpw_cnt = 0;
|
|
|
|
|
y_otpw_cnt = monitor_tmc_driver(stepperY, axis_codes[Y_AXIS], y_otpw_cnt);
|
|
|
|
|
monitor_tmc_driver(stepperY, axis_codes[Y_AXIS], y_otpw_cnt);
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_HW_COMMS(Z) || ENABLED(IS_TRAMS)
|
|
|
|
|
static uint8_t z_otpw_cnt = 0;
|
|
|
|
|
z_otpw_cnt = monitor_tmc_driver(stepperZ, axis_codes[Z_AXIS], z_otpw_cnt);
|
|
|
|
|
monitor_tmc_driver(stepperZ, axis_codes[Z_AXIS], z_otpw_cnt);
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_HW_COMMS(X2)
|
|
|
|
|
static uint8_t x2_otpw_cnt = 0;
|
|
|
|
|
x2_otpw_cnt = monitor_tmc_driver(stepperX2, axis_codes[X_AXIS], x2_otpw_cnt);
|
|
|
|
|
monitor_tmc_driver(stepperX2, axis_codes[X_AXIS], x2_otpw_cnt);
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_HW_COMMS(Y2)
|
|
|
|
|
static uint8_t y2_otpw_cnt = 0;
|
|
|
|
|
y2_otpw_cnt = monitor_tmc_driver(stepperY2, axis_codes[Y_AXIS], y2_otpw_cnt);
|
|
|
|
|
monitor_tmc_driver(stepperY2, axis_codes[Y_AXIS], y2_otpw_cnt);
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_HW_COMMS(Z2)
|
|
|
|
|
static uint8_t z2_otpw_cnt = 0;
|
|
|
|
|
z2_otpw_cnt = monitor_tmc_driver(stepperZ2, axis_codes[Z_AXIS], z2_otpw_cnt);
|
|
|
|
|
monitor_tmc_driver(stepperZ2, axis_codes[Z_AXIS], z2_otpw_cnt);
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_HW_COMMS(E0) || ENABLED(IS_TRAMS)
|
|
|
|
|
static uint8_t e0_otpw_cnt = 0;
|
|
|
|
|
e0_otpw_cnt = monitor_tmc_driver(stepperE0, axis_codes[E_AXIS], e0_otpw_cnt);
|
|
|
|
|
monitor_tmc_driver(stepperE0, axis_codes[E_AXIS], e0_otpw_cnt);
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_HW_COMMS(E1)
|
|
|
|
|
static uint8_t e1_otpw_cnt = 0;
|
|
|
|
|
e1_otpw_cnt = monitor_tmc_driver(stepperE1, axis_codes[E_AXIS], e1_otpw_cnt);
|
|
|
|
|
monitor_tmc_driver(stepperE1, axis_codes[E_AXIS], e1_otpw_cnt);
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_HW_COMMS(E2)
|
|
|
|
|
static uint8_t e2_otpw_cnt = 0;
|
|
|
|
|
e2_otpw_cnt = monitor_tmc_driver(stepperE2, axis_codes[E_AXIS], e2_otpw_cnt);
|
|
|
|
|
monitor_tmc_driver(stepperE2, axis_codes[E_AXIS], e2_otpw_cnt);
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_HW_COMMS(E3)
|
|
|
|
|
static uint8_t e3_otpw_cnt = 0;
|
|
|
|
|
e3_otpw_cnt = monitor_tmc_driver(stepperE3, axis_codes[E_AXIS], e3_otpw_cnt);
|
|
|
|
|
monitor_tmc_driver(stepperE3, axis_codes[E_AXIS], e3_otpw_cnt);
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_HW_COMMS(E4)
|
|
|
|
|
static uint8_t e4_otpw_cnt = 0;
|
|
|
|
|
e4_otpw_cnt = monitor_tmc_driver(stepperE4, axis_codes[E_AXIS], e4_otpw_cnt);
|
|
|
|
|
monitor_tmc_driver(stepperE4, axis_codes[E_AXIS], e4_otpw_cnt);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
if (report_tmc_status) SERIAL_EOL();
|
|
|
|
|
@ -216,4 +218,349 @@ char extended_axis_codes[11][3] = { "X", "X2", "Y", "Y2", "Z", "Z2", "E0", "E1",
|
|
|
|
|
|
|
|
|
|
#endif // MONITOR_DRIVER_STATUS
|
|
|
|
|
|
|
|
|
|
void _tmc_say_current(const char name[], const uint16_t curr) {
|
|
|
|
|
SERIAL_ECHO(name);
|
|
|
|
|
SERIAL_ECHOLNPAIR(" axis driver current: ", curr);
|
|
|
|
|
}
|
|
|
|
|
void _tmc_say_otpw(const char name[], const bool otpw) {
|
|
|
|
|
SERIAL_ECHO(name);
|
|
|
|
|
SERIAL_ECHOPGM(" axis temperature prewarn triggered: ");
|
|
|
|
|
serialprintPGM(otpw ? PSTR("true") : PSTR("false"));
|
|
|
|
|
SERIAL_EOL();
|
|
|
|
|
}
|
|
|
|
|
void _tmc_say_otpw_cleared(const char name[]) {
|
|
|
|
|
SERIAL_ECHO(name);
|
|
|
|
|
SERIAL_ECHOLNPGM(" prewarn flag cleared");
|
|
|
|
|
}
|
|
|
|
|
void _tmc_say_pwmthrs(const char name[], const uint32_t thrs) {
|
|
|
|
|
SERIAL_ECHO(name);
|
|
|
|
|
SERIAL_ECHOLNPAIR(" stealthChop max speed set to ", thrs);
|
|
|
|
|
}
|
|
|
|
|
void _tmc_say_sgt(const char name[], const uint32_t sgt) {
|
|
|
|
|
SERIAL_ECHO(name);
|
|
|
|
|
SERIAL_ECHOPGM(" driver homing sensitivity set to ");
|
|
|
|
|
MYSERIAL0.println(sgt, DEC);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#if ENABLED(TMC_DEBUG)
|
|
|
|
|
|
|
|
|
|
enum TMC_debug_enum {
|
|
|
|
|
TMC_CODES,
|
|
|
|
|
TMC_ENABLED,
|
|
|
|
|
TMC_CURRENT,
|
|
|
|
|
TMC_RMS_CURRENT,
|
|
|
|
|
TMC_MAX_CURRENT,
|
|
|
|
|
TMC_IRUN,
|
|
|
|
|
TMC_IHOLD,
|
|
|
|
|
TMC_CS_ACTUAL,
|
|
|
|
|
TMC_PWM_SCALE,
|
|
|
|
|
TMC_VSENSE,
|
|
|
|
|
TMC_STEALTHCHOP,
|
|
|
|
|
TMC_MICROSTEPS,
|
|
|
|
|
TMC_TSTEP,
|
|
|
|
|
TMC_TPWMTHRS,
|
|
|
|
|
TMC_TPWMTHRS_MMS,
|
|
|
|
|
TMC_OTPW,
|
|
|
|
|
TMC_OTPW_TRIGGERED,
|
|
|
|
|
TMC_TOFF,
|
|
|
|
|
TMC_TBL,
|
|
|
|
|
TMC_HEND,
|
|
|
|
|
TMC_HSTRT,
|
|
|
|
|
TMC_SGT
|
|
|
|
|
};
|
|
|
|
|
enum TMC_drv_status_enum {
|
|
|
|
|
TMC_DRV_CODES,
|
|
|
|
|
TMC_STST,
|
|
|
|
|
TMC_OLB,
|
|
|
|
|
TMC_OLA,
|
|
|
|
|
TMC_S2GB,
|
|
|
|
|
TMC_S2GA,
|
|
|
|
|
TMC_DRV_OTPW,
|
|
|
|
|
TMC_OT,
|
|
|
|
|
TMC_STALLGUARD,
|
|
|
|
|
TMC_DRV_CS_ACTUAL,
|
|
|
|
|
TMC_FSACTIVE,
|
|
|
|
|
TMC_SG_RESULT,
|
|
|
|
|
TMC_DRV_STATUS_HEX,
|
|
|
|
|
TMC_T157,
|
|
|
|
|
TMC_T150,
|
|
|
|
|
TMC_T143,
|
|
|
|
|
TMC_T120,
|
|
|
|
|
TMC_STEALTH,
|
|
|
|
|
TMC_S2VSB,
|
|
|
|
|
TMC_S2VSA
|
|
|
|
|
};
|
|
|
|
|
static void drv_status_print_hex(const char name[], const uint32_t drv_status) {
|
|
|
|
|
SERIAL_ECHO(name);
|
|
|
|
|
SERIAL_ECHOPGM(" = 0x");
|
|
|
|
|
for (int B = 24; B >= 8; B -= 8){
|
|
|
|
|
SERIAL_PRINT((drv_status >> (B + 4)) & 0xF, HEX);
|
|
|
|
|
SERIAL_PRINT((drv_status >> B) & 0xF, HEX);
|
|
|
|
|
SERIAL_CHAR(':');
|
|
|
|
|
}
|
|
|
|
|
SERIAL_PRINT((drv_status >> 4) & 0xF, HEX);
|
|
|
|
|
SERIAL_PRINT(drv_status & 0xF, HEX);
|
|
|
|
|
SERIAL_EOL();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#if ENABLED(HAVE_TMC2130)
|
|
|
|
|
static void tmc_status(TMC2130Stepper &st, const TMC_debug_enum i) {
|
|
|
|
|
switch(i) {
|
|
|
|
|
case TMC_PWM_SCALE: SERIAL_PRINT(st.PWM_SCALE(), DEC); break;
|
|
|
|
|
case TMC_TSTEP: SERIAL_ECHO(st.TSTEP()); break;
|
|
|
|
|
case TMC_SGT: SERIAL_PRINT(st.sgt(), DEC); break;
|
|
|
|
|
case TMC_STEALTHCHOP: serialprintPGM(st.stealthChop() ? PSTR("true") : PSTR("false")); break;
|
|
|
|
|
default: break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
static void tmc_parse_drv_status(TMC2130Stepper &st, const TMC_drv_status_enum i) {
|
|
|
|
|
switch(i) {
|
|
|
|
|
case TMC_STALLGUARD: if (st.stallguard()) SERIAL_CHAR('X'); break;
|
|
|
|
|
case TMC_SG_RESULT: SERIAL_PRINT(st.sg_result(), DEC); break;
|
|
|
|
|
case TMC_FSACTIVE: if (st.fsactive()) SERIAL_CHAR('X'); break;
|
|
|
|
|
default: break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
#if ENABLED(HAVE_TMC2208)
|
|
|
|
|
static void tmc_status(TMC2208Stepper &st, const TMC_debug_enum i) {
|
|
|
|
|
switch(i) {
|
|
|
|
|
case TMC_TSTEP: { uint32_t data = 0; st.TSTEP(&data); MYSERIAL0.print(data); break; }
|
|
|
|
|
case TMC_PWM_SCALE: SERIAL_PRINT(st.pwm_scale_sum(), DEC); break;
|
|
|
|
|
case TMC_STEALTHCHOP: serialprintPGM(st.stealth() ? PSTR("true") : PSTR("false")); break;
|
|
|
|
|
case TMC_S2VSA: if (st.s2vsa()) SERIAL_CHAR('X'); break;
|
|
|
|
|
case TMC_S2VSB: if (st.s2vsb()) SERIAL_CHAR('X'); break;
|
|
|
|
|
default: break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
static void tmc_parse_drv_status(TMC2208Stepper &st, const TMC_drv_status_enum i) {
|
|
|
|
|
switch(i) {
|
|
|
|
|
case TMC_T157: if (st.t157()) SERIAL_CHAR('X'); break;
|
|
|
|
|
case TMC_T150: if (st.t150()) SERIAL_CHAR('X'); break;
|
|
|
|
|
case TMC_T143: if (st.t143()) SERIAL_CHAR('X'); break;
|
|
|
|
|
case TMC_T120: if (st.t120()) SERIAL_CHAR('X'); break;
|
|
|
|
|
default: break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
template <typename TMC>
|
|
|
|
|
static void tmc_status(TMC &st, TMC_AxisEnum axis, const TMC_debug_enum i, const float spmm) {
|
|
|
|
|
SERIAL_ECHO('\t');
|
|
|
|
|
switch(i) {
|
|
|
|
|
case TMC_CODES: SERIAL_ECHO(extended_axis_codes[axis]); break;
|
|
|
|
|
case TMC_ENABLED: serialprintPGM(st.isEnabled() ? PSTR("true") : PSTR("false")); break;
|
|
|
|
|
case TMC_CURRENT: SERIAL_ECHO(st.getCurrent()); break;
|
|
|
|
|
case TMC_RMS_CURRENT: MYSERIAL0.print(st.rms_current()); break;
|
|
|
|
|
case TMC_MAX_CURRENT: SERIAL_PRINT((float)st.rms_current() * 1.41, 0); break;
|
|
|
|
|
case TMC_IRUN:
|
|
|
|
|
SERIAL_PRINT(st.irun(), DEC);
|
|
|
|
|
SERIAL_ECHOPGM("/31");
|
|
|
|
|
break;
|
|
|
|
|
case TMC_IHOLD:
|
|
|
|
|
SERIAL_PRINT(st.ihold(), DEC);
|
|
|
|
|
SERIAL_ECHOPGM("/31");
|
|
|
|
|
break;
|
|
|
|
|
case TMC_CS_ACTUAL:
|
|
|
|
|
SERIAL_PRINT(st.cs_actual(), DEC);
|
|
|
|
|
SERIAL_ECHOPGM("/31");
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case TMC_VSENSE: serialprintPGM(st.vsense() ? PSTR("1=.18") : PSTR("0=.325")); break;
|
|
|
|
|
|
|
|
|
|
case TMC_MICROSTEPS: SERIAL_ECHO(st.microsteps()); break;
|
|
|
|
|
case TMC_TPWMTHRS: {
|
|
|
|
|
uint32_t tpwmthrs_val = st.TPWMTHRS();
|
|
|
|
|
SERIAL_ECHO(tpwmthrs_val);
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
case TMC_TPWMTHRS_MMS: {
|
|
|
|
|
uint32_t tpwmthrs_val = st.TPWMTHRS();
|
|
|
|
|
tpwmthrs_val ? SERIAL_ECHO(12650000UL * st.microsteps() / (256 * tpwmthrs_val * spmm)) : SERIAL_CHAR('-');
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
case TMC_OTPW: serialprintPGM(st.otpw() ? PSTR("true") : PSTR("false")); break;
|
|
|
|
|
case TMC_OTPW_TRIGGERED: serialprintPGM(st.getOTPW() ? PSTR("true") : PSTR("false")); break;
|
|
|
|
|
case TMC_TOFF: SERIAL_PRINT(st.toff(), DEC); break;
|
|
|
|
|
case TMC_TBL: SERIAL_PRINT(st.blank_time(), DEC); break;
|
|
|
|
|
case TMC_HEND: SERIAL_PRINT(st.hysterisis_end(), DEC); break;
|
|
|
|
|
case TMC_HSTRT: SERIAL_PRINT(st.hysterisis_start(), DEC); break;
|
|
|
|
|
default: tmc_status(st, i); break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
template <typename TMC>
|
|
|
|
|
static void tmc_parse_drv_status(TMC &st, TMC_AxisEnum axis, const TMC_drv_status_enum i) {
|
|
|
|
|
SERIAL_CHAR('\t');
|
|
|
|
|
switch(i) {
|
|
|
|
|
case TMC_DRV_CODES: SERIAL_ECHO(extended_axis_codes[axis]); break;
|
|
|
|
|
case TMC_STST: if (st.stst()) SERIAL_CHAR('X'); break;
|
|
|
|
|
case TMC_OLB: if (st.olb()) SERIAL_CHAR('X'); break;
|
|
|
|
|
case TMC_OLA: if (st.ola()) SERIAL_CHAR('X'); break;
|
|
|
|
|
case TMC_S2GB: if (st.s2gb()) SERIAL_CHAR('X'); break;
|
|
|
|
|
case TMC_S2GA: if (st.s2ga()) SERIAL_CHAR('X'); break;
|
|
|
|
|
case TMC_DRV_OTPW: if (st.otpw()) SERIAL_CHAR('X'); break;
|
|
|
|
|
case TMC_OT: if (st.ot()) SERIAL_CHAR('X'); break;
|
|
|
|
|
case TMC_DRV_CS_ACTUAL: SERIAL_PRINT(st.cs_actual(), DEC); break;
|
|
|
|
|
case TMC_DRV_STATUS_HEX:drv_status_print_hex(extended_axis_codes[axis], st.DRV_STATUS()); break;
|
|
|
|
|
default: tmc_parse_drv_status(st, i); break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void tmc_debug_loop(const TMC_debug_enum i) {
|
|
|
|
|
#if X_IS_TRINAMIC
|
|
|
|
|
tmc_status(stepperX, TMC_X, i, planner.axis_steps_per_mm[X_AXIS]);
|
|
|
|
|
#endif
|
|
|
|
|
#if X2_IS_TRINAMIC
|
|
|
|
|
tmc_status(stepperX2, TMC_X2, i, planner.axis_steps_per_mm[X_AXIS]);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if Y_IS_TRINAMIC
|
|
|
|
|
tmc_status(stepperY, TMC_Y, i, planner.axis_steps_per_mm[Y_AXIS]);
|
|
|
|
|
#endif
|
|
|
|
|
#if Y2_IS_TRINAMIC
|
|
|
|
|
tmc_status(stepperY2, TMC_Y2, i, planner.axis_steps_per_mm[Y_AXIS]);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if Z_IS_TRINAMIC
|
|
|
|
|
tmc_status(stepperZ, TMC_Z, i, planner.axis_steps_per_mm[Z_AXIS]);
|
|
|
|
|
#endif
|
|
|
|
|
#if Z2_IS_TRINAMIC
|
|
|
|
|
tmc_status(stepperZ2, TMC_Z2, i, planner.axis_steps_per_mm[Z_AXIS]);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if E0_IS_TRINAMIC
|
|
|
|
|
tmc_status(stepperE0, TMC_E0, i, planner.axis_steps_per_mm[E_AXIS]);
|
|
|
|
|
#endif
|
|
|
|
|
#if E1_IS_TRINAMIC
|
|
|
|
|
tmc_status(stepperE1, TMC_E1, i, planner.axis_steps_per_mm[E_AXIS+1]);
|
|
|
|
|
#endif
|
|
|
|
|
#if E2_IS_TRINAMIC
|
|
|
|
|
tmc_status(stepperE2, TMC_E2, i, planner.axis_steps_per_mm[E_AXIS+2]);
|
|
|
|
|
#endif
|
|
|
|
|
#if E3_IS_TRINAMIC
|
|
|
|
|
tmc_status(stepperE3, TMC_E3, i, planner.axis_steps_per_mm[E_AXIS+3]);
|
|
|
|
|
#endif
|
|
|
|
|
#if E4_IS_TRINAMIC
|
|
|
|
|
tmc_status(stepperE4, TMC_E4, i, planner.axis_steps_per_mm[E_AXIS+4]);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
SERIAL_EOL();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void drv_status_loop(const TMC_drv_status_enum i) {
|
|
|
|
|
#if X_IS_TRINAMIC
|
|
|
|
|
tmc_parse_drv_status(stepperX, TMC_X, i);
|
|
|
|
|
#endif
|
|
|
|
|
#if X2_IS_TRINAMIC
|
|
|
|
|
tmc_parse_drv_status(stepperX2, TMC_X2, i);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if Y_IS_TRINAMIC
|
|
|
|
|
tmc_parse_drv_status(stepperY, TMC_Y, i);
|
|
|
|
|
#endif
|
|
|
|
|
#if Y2_IS_TRINAMIC
|
|
|
|
|
tmc_parse_drv_status(stepperY2, TMC_Y2, i);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if Z_IS_TRINAMIC
|
|
|
|
|
tmc_parse_drv_status(stepperZ, TMC_Z, i);
|
|
|
|
|
#endif
|
|
|
|
|
#if Z2_IS_TRINAMIC
|
|
|
|
|
tmc_parse_drv_status(stepperZ2, TMC_Z2, i);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if E0_IS_TRINAMIC
|
|
|
|
|
tmc_parse_drv_status(stepperE0, TMC_E0, i);
|
|
|
|
|
#endif
|
|
|
|
|
#if E1_IS_TRINAMIC
|
|
|
|
|
tmc_parse_drv_status(stepperE1, TMC_E1, i);
|
|
|
|
|
#endif
|
|
|
|
|
#if E2_IS_TRINAMIC
|
|
|
|
|
tmc_parse_drv_status(stepperE2, TMC_E2, i);
|
|
|
|
|
#endif
|
|
|
|
|
#if E3_IS_TRINAMIC
|
|
|
|
|
tmc_parse_drv_status(stepperE3, TMC_E3, i);
|
|
|
|
|
#endif
|
|
|
|
|
#if E4_IS_TRINAMIC
|
|
|
|
|
tmc_parse_drv_status(stepperE4, TMC_E4, i);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
SERIAL_EOL();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* M122 report functions
|
|
|
|
|
*/
|
|
|
|
|
void tmc_set_report_status(const bool status) {
|
|
|
|
|
if ((report_tmc_status = status))
|
|
|
|
|
SERIAL_ECHOLNPGM("axis:pwm_scale |status_response|");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void tmc_report_all() {
|
|
|
|
|
#define TMC_REPORT(LABEL, ITEM) do{ SERIAL_ECHOPGM(LABEL); tmc_debug_loop(ITEM); }while(0)
|
|
|
|
|
#define DRV_REPORT(LABEL, ITEM) do{ SERIAL_ECHOPGM(LABEL); drv_status_loop(ITEM); }while(0)
|
|
|
|
|
TMC_REPORT("\t", TMC_CODES);
|
|
|
|
|
TMC_REPORT("Enabled\t", TMC_ENABLED);
|
|
|
|
|
TMC_REPORT("Set current", TMC_CURRENT);
|
|
|
|
|
TMC_REPORT("RMS current", TMC_RMS_CURRENT);
|
|
|
|
|
TMC_REPORT("MAX current", TMC_MAX_CURRENT);
|
|
|
|
|
TMC_REPORT("Run current", TMC_IRUN);
|
|
|
|
|
TMC_REPORT("Hold current", TMC_IHOLD);
|
|
|
|
|
TMC_REPORT("CS actual\t", TMC_CS_ACTUAL);
|
|
|
|
|
TMC_REPORT("PWM scale", TMC_PWM_SCALE);
|
|
|
|
|
TMC_REPORT("vsense\t", TMC_VSENSE);
|
|
|
|
|
TMC_REPORT("stealthChop", TMC_STEALTHCHOP);
|
|
|
|
|
TMC_REPORT("msteps\t", TMC_MICROSTEPS);
|
|
|
|
|
TMC_REPORT("tstep\t", TMC_TSTEP);
|
|
|
|
|
TMC_REPORT("pwm\nthreshold\t", TMC_TPWMTHRS);
|
|
|
|
|
TMC_REPORT("[mm/s]\t", TMC_TPWMTHRS_MMS);
|
|
|
|
|
TMC_REPORT("OT prewarn", TMC_OTPW);
|
|
|
|
|
TMC_REPORT("OT prewarn has\n"
|
|
|
|
|
"been triggered", TMC_OTPW_TRIGGERED);
|
|
|
|
|
TMC_REPORT("off time\t", TMC_TOFF);
|
|
|
|
|
TMC_REPORT("blank time", TMC_TBL);
|
|
|
|
|
TMC_REPORT("hysterisis\n-end\t", TMC_HEND);
|
|
|
|
|
TMC_REPORT("-start\t", TMC_HSTRT);
|
|
|
|
|
TMC_REPORT("Stallguard thrs", TMC_SGT);
|
|
|
|
|
|
|
|
|
|
DRV_REPORT("DRVSTATUS", TMC_DRV_CODES);
|
|
|
|
|
#if ENABLED(HAVE_TMC2130)
|
|
|
|
|
DRV_REPORT("stallguard\t", TMC_STALLGUARD);
|
|
|
|
|
DRV_REPORT("sg_result\t", TMC_SG_RESULT);
|
|
|
|
|
DRV_REPORT("fsactive\t", TMC_FSACTIVE);
|
|
|
|
|
#endif
|
|
|
|
|
DRV_REPORT("stst\t", TMC_STST);
|
|
|
|
|
DRV_REPORT("olb\t", TMC_OLB);
|
|
|
|
|
DRV_REPORT("ola\t", TMC_OLA);
|
|
|
|
|
DRV_REPORT("s2gb\t", TMC_S2GB);
|
|
|
|
|
DRV_REPORT("s2ga\t", TMC_S2GA);
|
|
|
|
|
DRV_REPORT("otpw\t", TMC_DRV_OTPW);
|
|
|
|
|
DRV_REPORT("ot\t", TMC_OT);
|
|
|
|
|
#if ENABLED(HAVE_TMC2208)
|
|
|
|
|
DRV_REPORT("157C\t", TMC_T157);
|
|
|
|
|
DRV_REPORT("150C\t", TMC_T150);
|
|
|
|
|
DRV_REPORT("143C\t", TMC_T143);
|
|
|
|
|
DRV_REPORT("120C\t", TMC_T120);
|
|
|
|
|
DRV_REPORT("s2vsa\t", TMC_S2VSA);
|
|
|
|
|
DRV_REPORT("s2vsb\t", TMC_S2VSB);
|
|
|
|
|
#endif
|
|
|
|
|
DRV_REPORT("Driver registers:", TMC_DRV_STATUS_HEX);
|
|
|
|
|
SERIAL_EOL();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#endif // TMC_DEBUG
|
|
|
|
|
|
|
|
|
|
#if ENABLED(SENSORLESS_HOMING)
|
|
|
|
|
|
|
|
|
|
void tmc_sensorless_homing(TMC2130Stepper &st, bool enable/*=true*/) {
|
|
|
|
|
#if ENABLED(STEALTHCHOP)
|
|
|
|
|
st.coolstep_min_speed(enable ? 1024UL * 1024UL - 1UL : 0);
|
|
|
|
|
st.stealthChop(!enable);
|
|
|
|
|
#endif
|
|
|
|
|
st.diag1_stall(enable ? 1 : 0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#endif // SENSORLESS_HOMING
|
|
|
|
|
|
|
|
|
|
#endif // HAS_TRINAMIC
|
|
|
|
|
|
Scott Lahteine
7 years ago
committed by