M73 R : Set Remaining Time (#15549)

Marlin/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

Marlin/src/Marlin.cpp

@@ -378,6 +378,9 @@ void startOrResumeJob() {
     #if ENABLED(LCD_SHOW_E_TOTAL)
       e_move_accumulator = 0;
     #endif
+    #if ENABLED(USE_M73_REMAINING_TIME)
+      ui.reset_remaining_time();
+    #endif
   }
   print_job_timer.start();
 }

Marlin/src/gcode/lcd/M73.cpp

@@ -43,6 +43,9 @@ void GcodeSuite::M73() {
       ? parser.value_float() * (PROGRESS_SCALE)
       : parser.value_byte()
     );
+  #if ENABLED(USE_M73_REMAINING_TIME)
+    if (parser.seen('R')) ui.set_remaining_time(60 * parser.value_ulong());
+  #endif
 }
 
 #endif // LCD_SET_PROGRESS_MANUALLY

Marlin/src/lcd/dogm/status_screen_DOGM.cpp

@@ -455,19 +455,25 @@ void MarlinUI::draw_status_screen() {
 
         #if ENABLED(SHOW_REMAINING_TIME)
           if (!(ev & 0x3)) {
-            duration_t estimation = elapsed.value * (100 * (PROGRESS_SCALE) - progress) / progress;
+            uint32_t timeval = (0
-            if (estimation.value == 0) {
+              #if ENABLED(USE_M73_REMAINING_TIME)
+                + get_remaining_time()
+              #endif
+            );
+            if (!timeval) timeval = elapsed.value * (100 * (PROGRESS_SCALE) - progress) / progress;
+            if (!timeval) {
               estimation_string[0] = '\0';
               estimation_x_pos = _SD_INFO_X(0);
             }
             else {
+              duration_t estimation = timeval;
               const bool has_days = (estimation.value >= 60*60*24L);
               const uint8_t len = estimation.toDigital(estimation_string, has_days);
-              #if BOTH(DOGM_SD_PERCENT, ROTATE_PROGRESS_DISPLAY)
+              estimation_x_pos = _SD_INFO_X(len
-                estimation_x_pos = _SD_INFO_X(len);
+                #if !BOTH(DOGM_SD_PERCENT, ROTATE_PROGRESS_DISPLAY)
-              #else
+                  + 1
-                estimation_x_pos = _SD_INFO_X(len + 1);
                 #endif
+              );
             }
           }
         #endif

Marlin/src/lcd/ultralcd.cpp

@@ -59,6 +59,9 @@
 
 #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
   MarlinUI::progress_t MarlinUI::progress_override; // = 0
+  #if ENABLED(USE_M73_REMAINING_TIME)
+    uint32_t MarlinUI::remaining_time;
+  #endif
 #endif
 
 #if ENABLED(PCA9632_BUZZER) || USE_BEEPER

Marlin/src/lcd/ultralcd.h

@@ -304,10 +304,16 @@ public:
         static void set_progress(const progress_t p) { progress_override = _MIN(p, 100U * (PROGRESS_SCALE)); }
         static void set_progress_done() { progress_override = (PROGRESS_MASK + 1U) + 100U * (PROGRESS_SCALE); }
         static void progress_reset() { if (progress_override & (PROGRESS_MASK + 1U)) set_progress(0); }
+        #if ENABLED(USE_M73_REMAINING_TIME)
+          static uint32_t remaining_time;
+          FORCE_INLINE static void set_remaining_time(const uint32_t r) { remaining_time = r; }
+          FORCE_INLINE static uint32_t get_remaining_time() { return remaining_time; }
+          FORCE_INLINE static void reset_remaining_time() { set_remaining_time(0); }
+        #endif
       #endif
       static progress_t _get_progress();
       #if HAS_PRINT_PROGRESS_PERMYRIAD
-        static uint16_t get_progress_permyriad() { return _get_progress(); }
+        FORCE_INLINE static uint16_t get_progress_permyriad() { return _get_progress(); }
       #endif
       static uint8_t get_progress_percent() { return uint8_t(_get_progress() / (PROGRESS_SCALE)); }
     #else
@@ -321,9 +327,9 @@ public:
       static bool detected();
 
       static LCDViewAction lcdDrawUpdate;
-      static inline bool should_draw() { return bool(lcdDrawUpdate); }
+      FORCE_INLINE static bool should_draw() { return bool(lcdDrawUpdate); }
-      static inline void refresh(const LCDViewAction type) { lcdDrawUpdate = type; }
+      FORCE_INLINE static void refresh(const LCDViewAction type) { lcdDrawUpdate = type; }
-      static inline void refresh() { refresh(LCDVIEW_CLEAR_CALL_REDRAW); }
+      FORCE_INLINE static void refresh() { refresh(LCDVIEW_CLEAR_CALL_REDRAW); }
 
       #if ENABLED(SHOW_CUSTOM_BOOTSCREEN)
         static void draw_custom_bootscreen(const uint8_t frame=0);
@@ -353,7 +359,7 @@ public:
           static void draw_progress_bar(const uint8_t percent);
           #if PROGRESS_MSG_EXPIRE > 0
             static millis_t expire_status_ms; // = 0
-            static inline void reset_progress_bar_timeout() { expire_status_ms = 0; }
+            FORCE_INLINE static void reset_progress_bar_timeout() { expire_status_ms = 0; }
           #endif
         #endif
 
@@ -364,7 +370,7 @@ public:
       #if HAS_LCD_CONTRAST
         static int16_t contrast;
         static void set_contrast(const int16_t value);
-        static inline void refresh_contrast() { set_contrast(contrast); }
+        FORCE_INLINE static void refresh_contrast() { set_contrast(contrast); }
       #endif
 
       #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
@@ -477,13 +483,13 @@ public:
 
     static void return_to_status();
     static inline bool on_status_screen() { return currentScreen == status_screen; }
-    static inline void run_current_screen() { (*currentScreen)(); }
+    FORCE_INLINE static void run_current_screen() { (*currentScreen)(); }
 
     #if ENABLED(LIGHTWEIGHT_UI)
       static void lcd_in_status(const bool inStatus);
     #endif
 
-    static inline void defer_status_screen(const bool defer=true) {
+    FORCE_INLINE static void defer_status_screen(const bool defer=true) {
       #if LCD_TIMEOUT_TO_STATUS
         defer_return_to_status = defer;
       #else
@@ -501,7 +507,7 @@ public:
     #endif
 
     #if ENABLED(G26_MESH_VALIDATION)
-      static inline void chirp() {
+      FORCE_INLINE static void chirp() {
         #if HAS_BUZZER
           buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
         #endif
@@ -518,7 +524,7 @@ public:
 
     static constexpr bool lcd_clicked = false;
     static constexpr bool on_status_screen() { return true; }
-    static inline void run_current_screen() { status_screen(); }
+    FORCE_INLINE static void run_current_screen() { status_screen(); }
 
   #endif
 
@@ -564,22 +570,27 @@ public:
 
     #if EITHER(REVERSE_MENU_DIRECTION, REVERSE_SELECT_DIRECTION)
       static int8_t encoderDirection;
-      static inline void encoder_direction_normal() { encoderDirection = ENCODERBASE; }
     #else
       static constexpr int8_t encoderDirection = ENCODERBASE;
-      static inline void encoder_direction_normal() {}
     #endif
 
+    FORCE_INLINE static void encoder_direction_normal() {
+      #if EITHER(REVERSE_MENU_DIRECTION, REVERSE_SELECT_DIRECTION)
+        encoderDirection = ENCODERBASE;
+      #endif
+    }
+
+    FORCE_INLINE static void encoder_direction_menus() {
       #if ENABLED(REVERSE_MENU_DIRECTION)
-      static inline void encoder_direction_menus()  { encoderDirection = -(ENCODERBASE); }
+        encoderDirection = -(ENCODERBASE);
-    #else
-      static inline void encoder_direction_menus()  {}
       #endif
+    }
+
+    FORCE_INLINE static void encoder_direction_select() {
       #if ENABLED(REVERSE_SELECT_DIRECTION)
-      static inline void encoder_direction_select()  { encoderDirection = -(ENCODERBASE); }
+        encoderDirection = -(ENCODERBASE);
-    #else
-      static inline void encoder_direction_select()  {}
       #endif
+    }
 
   #else
 

config/default/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/ADIMLab/Gantry v1/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/ADIMLab/Gantry v2/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Alfawise/U20-bltouch/Configuration_adv.h

@@ -912,7 +912,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Alfawise/U20/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Anet/A2/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Anet/A2plus/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Anet/A6/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Anet/A8/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Anet/A8plus/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Anet/E16/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/ArmEd/Configuration_adv.h

@@ -915,7 +915,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -919,7 +919,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Cartesio/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Creality/CR-10/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Creality/CR-20 Pro/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Creality/CR-20/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Creality/CR-8/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Creality/Ender-5/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Dagoma/Disco Ultimate/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Einstart-S/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/FYSETC/AIO_II/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/FYSETC/Cheetah/base/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/FYSETC/F6_13/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Felix/DUAL/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Felix/Single/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -910,7 +910,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -915,7 +915,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Geeetech/A10/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/HMS434/Configuration_adv.h

@@ -879,7 +879,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/JGAurora/A1/Configuration_adv.h

@@ -916,7 +916,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/JGAurora/A5/Configuration_adv.h

@@ -911,7 +911,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/JGAurora/A5S/Configuration_adv.h

@@ -916,7 +916,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/MakerParts/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Malyan/M150/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Malyan/M200/Configuration_adv.h

@@ -910,7 +910,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Mks/Robin/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Mks/Sbase/Configuration_adv.h

@@ -909,7 +909,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/RigidBot/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/SCARA/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Sanguinololu/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Tevo/Michelangelo/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Tevo/Tarantula Pro/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/TheBorg/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/TinyBoy2/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Tronxy/X3A/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Tronxy/X5S-2E/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/VORONDesign/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Velleman/K8200/Configuration_adv.h

@@ -921,7 +921,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Velleman/K8400/Dual-head/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Velleman/K8400/Single-head/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/WASP/PowerWASP/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -910,7 +910,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h

@@ -908,7 +908,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -913,7 +913,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/delta/Dreammaker/Overlord/Configuration_adv.h

@@ -913,7 +913,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h

@@ -913,7 +913,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -913,7 +913,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -913,7 +913,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -913,7 +913,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS

config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -913,7 +913,10 @@
 #if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
+  #if ENABLED(SHOW_REMAINING_TIME)
+    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     //#define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
+  #endif
 #endif
 
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS