More parity with 1.1.x, plus whitespace

Marlin/src/config/examples/MakerParts/Configuration.h

@@ -548,14 +548,14 @@
  * Override with M92
  *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {80,80,4000,97}  //motor bajos con varilla3200 y altos 1600 default steps per unit for Ultimaker
+#define DEFAULT_AXIS_STEPS_PER_UNIT     { 80, 80, 4000, 97 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
-#define DEFAULT_MAX_FEEDRATE            { 300, 300, 2, 30 } /* For 300mm/s printing */ 
+#define DEFAULT_MAX_FEEDRATE            { 300, 300, 2, 30 } // For 300mm/s printing
 
 /**
  * Default Max Acceleration (change/s) change = mm/s

Marlin/src/lcd/ultralcd.cpp

@@ -2559,10 +2559,8 @@ void kill_screen(const char* lcd_msg) {
               lcd_bed_leveling
             #endif
           );
-    #else
-      #if PLANNER_LEVELING
-        MENU_ITEM(gcode, MSG_BED_LEVELING, PSTR("G28\nG29"));
-      #endif
+    #elif PLANNER_LEVELING && DISABLED(PROBE_MANUALLY)
+      MENU_ITEM(gcode, MSG_BED_LEVELING, PSTR("G28\nG29"));
     #endif
 
     #if ENABLED(LEVEL_BED_CORNERS) && DISABLED(LCD_BED_LEVELING)

Marlin/src/module/planner.cpp

@@ -1100,7 +1100,7 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE], float fr_mm_s, const
   float max_stepper_speed = 0, min_axis_accel_ratio = 1; // ratio < 1 means acceleration ramp needed
   LOOP_XYZE(i) {
     const float cs = FABS((current_speed[i] = delta_mm[i] * inverse_secs));
-    if (cs >  max_jerk[i]) 
+    if (cs > max_jerk[i])
       NOMORE(min_axis_accel_ratio, max_jerk[i] / cs);
     NOLESS(max_stepper_speed, cs);
     #if ENABLED(DISTINCT_E_FACTORS)

Marlin/src/module/temperature.cpp

@@ -803,7 +803,7 @@ void Temperature::manage_heater() {
       meas_shift_index = filwidth_delay_index[0] - meas_delay_cm;
       if (meas_shift_index < 0) meas_shift_index += MAX_MEASUREMENT_DELAY + 1;  //loop around buffer if needed
       meas_shift_index = constrain(meas_shift_index, 0, MAX_MEASUREMENT_DELAY);
-      calculate_volumetric_for_width_sensor(measurement_delay[meas_shift_index])
+      planner.calculate_volumetric_for_width_sensor(measurement_delay[meas_shift_index]);
     }
   #endif // FILAMENT_WIDTH_SENSOR