New Language: Vietnamese (#13892)
Scott Lahteine
5 years ago
committed by
GitHub
parent
f6b604ff49
commit
d6a16525c2
@ -0,0 +1,232 @@
|
|||||||
|
/**
|
||||||
|
* Generated automatically by buildroot/share/fonts/uxggenpages.sh
|
||||||
|
* Contents will be REPLACED by future processing!
|
||||||
|
* Use genallfont.sh to generate font data for updated languages.
|
||||||
|
*/
|
||||||
|
#include <U8glib.h>
|
||||||
|
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_2_131_131[31] U8G_FONT_SECTION("fontpage_2_131_131") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x83,0x83,0x00,0x08,0x00,0x00,
|
||||||
|
0x00,0x05,0x08,0x08,0x06,0x00,0x00,0x88,0x70,0x00,0x70,0x08,0x78,0x88,0x78};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_2_144_145[44] U8G_FONT_SECTION("fontpage_2_144_145") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x90,0x91,0x00,0x08,0x00,0x00,
|
||||||
|
0x00,0x05,0x07,0x07,0x06,0x00,0x00,0xf0,0x48,0x48,0xe8,0x48,0x48,0xf0,0x06,0x08,
|
||||||
|
0x08,0x06,0x00,0x00,0x08,0x1c,0x08,0x78,0x88,0x88,0x88,0x78};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_2_169_169[31] U8G_FONT_SECTION("fontpage_2_169_169") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa9,0xa9,0x00,0x08,0x00,0x00,
|
||||||
|
0x00,0x04,0x08,0x08,0x06,0x00,0x00,0x50,0xa0,0x00,0x60,0x20,0x20,0x20,0x70};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_3_161_161[30] U8G_FONT_SECTION("fontpage_3_161_161") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa1,0xa1,0x00,0x07,0x00,0x00,
|
||||||
|
0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x08,0x08,0x70,0x88,0x88,0x88,0x70};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_3_175_176[43] U8G_FONT_SECTION("fontpage_3_175_176") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xaf,0xb0,0x00,0x08,0x00,0x00,
|
||||||
|
0x00,0x05,0x08,0x08,0x06,0x00,0x00,0x08,0x98,0x90,0x90,0x90,0x90,0x90,0x60,0x05,
|
||||||
|
0x06,0x06,0x06,0x00,0x00,0x08,0x98,0x90,0x90,0xb0,0x50};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_6_131_131[25] U8G_FONT_SECTION("fontpage_6_131_131") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x83,0x83,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x05,0x02,0x02,0x06,0x00,0x08,0x68,0xb0};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_6_137_137[26] U8G_FONT_SECTION("fontpage_6_137_137") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x89,0x89,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x03,0x03,0x03,0x06,0x01,0x07,0xc0,0x20,0x40};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_6_163_163[24] U8G_FONT_SECTION("fontpage_6_163_163") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa3,0xa3,0x00,0x00,0xfe,0x00,
|
||||||
|
0x00,0x01,0x01,0x01,0x06,0x02,0xfe,0x80};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_6_192_193[33] U8G_FONT_SECTION("fontpage_6_192_193") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xc0,0xc1,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x02,0x02,0x02,0x06,0x01,0x08,0x80,0x40,0x02,0x02,0x02,0x06,0x02,0x08,0x40,
|
||||||
|
0x80};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_161_161[30] U8G_FONT_SECTION("fontpage_61_161_161") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa1,0xa1,0x00,0x05,0xfe,0x00,
|
||||||
|
0x00,0x05,0x07,0x07,0x07,0x00,0xfe,0x70,0x08,0x78,0x88,0x78,0x00,0x20};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_163_163[32] U8G_FONT_SECTION("fontpage_61_163_163") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa3,0xa3,0x00,0x09,0x00,0x00,
|
||||||
|
0x00,0x05,0x09,0x09,0x07,0x00,0x00,0x30,0x10,0x20,0x00,0x70,0x08,0x78,0x88,0x78
|
||||||
|
};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_165_165[33] U8G_FONT_SECTION("fontpage_61_165_165") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa5,0xa5,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x06,0x0a,0x0a,0x07,0x00,0x00,0x04,0x08,0x30,0x48,0x00,0x70,0x08,0x78,0x88,
|
||||||
|
0x78};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_167_167[33] U8G_FONT_SECTION("fontpage_61_167_167") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa7,0xa7,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x05,0x0a,0x0a,0x07,0x00,0x00,0x10,0x08,0x30,0x48,0x00,0x70,0x08,0x78,0x88,
|
||||||
|
0x78};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_169_169[34] U8G_FONT_SECTION("fontpage_61_169_169") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa9,0xa9,0x00,0x0b,0x00,0x00,
|
||||||
|
0x00,0x06,0x0b,0x0b,0x07,0x00,0x00,0x0c,0x04,0x08,0x30,0x48,0x00,0x70,0x08,0x78,
|
||||||
|
0x88,0x78};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_173_173[33] U8G_FONT_SECTION("fontpage_61_173_173") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xad,0xad,0x00,0x08,0xfe,0x00,
|
||||||
|
0x00,0x05,0x0a,0x0a,0x07,0x00,0xfe,0x30,0x48,0x00,0x70,0x08,0x78,0x88,0x78,0x00,
|
||||||
|
0x20};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_175_175[33] U8G_FONT_SECTION("fontpage_61_175_175") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xaf,0xaf,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x05,0x0a,0x0a,0x07,0x00,0x00,0x08,0x10,0x48,0x30,0x00,0x70,0x08,0x78,0x88,
|
||||||
|
0x78};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_177_177[33] U8G_FONT_SECTION("fontpage_61_177_177") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xb1,0xb1,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x05,0x0a,0x0a,0x07,0x00,0x00,0x40,0x20,0x48,0x30,0x00,0x70,0x08,0x78,0x88,
|
||||||
|
0x78};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_179_179[34] U8G_FONT_SECTION("fontpage_61_179_179") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xb3,0xb3,0x00,0x0b,0x00,0x00,
|
||||||
|
0x00,0x05,0x0b,0x0b,0x07,0x00,0x00,0x18,0x08,0x10,0x48,0x30,0x00,0x70,0x08,0x78,
|
||||||
|
0x88,0x78};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_181_181[34] U8G_FONT_SECTION("fontpage_61_181_181") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xb5,0xb5,0x00,0x0b,0x00,0x00,
|
||||||
|
0x00,0x06,0x0b,0x0b,0x07,0x00,0x00,0x14,0x28,0x00,0x48,0x30,0x00,0x70,0x08,0x78,
|
||||||
|
0x88,0x78};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_183_183[33] U8G_FONT_SECTION("fontpage_61_183_183") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xb7,0xb7,0x00,0x08,0xfe,0x00,
|
||||||
|
0x00,0x05,0x0a,0x0a,0x07,0x00,0xfe,0x48,0x30,0x00,0x70,0x08,0x78,0x88,0x78,0x00,
|
||||||
|
0x20};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_187_187[32] U8G_FONT_SECTION("fontpage_61_187_187") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xbb,0xbb,0x00,0x09,0x00,0x00,
|
||||||
|
0x00,0x05,0x09,0x09,0x07,0x00,0x00,0x30,0x10,0x20,0x00,0x70,0x88,0xf0,0x80,0x78
|
||||||
|
};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_191_191[33] U8G_FONT_SECTION("fontpage_61_191_191") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xbf,0xbf,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x06,0x0a,0x0a,0x07,0x00,0x00,0x04,0x08,0x20,0x50,0x00,0x70,0x88,0xf0,0x80,
|
||||||
|
0x78};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_193_193[33] U8G_FONT_SECTION("fontpage_61_193_193") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xc1,0xc1,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x05,0x0a,0x0a,0x07,0x00,0x00,0x10,0x08,0x20,0x50,0x00,0x70,0x88,0xf0,0x80,
|
||||||
|
0x78};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_195_195[34] U8G_FONT_SECTION("fontpage_61_195_195") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xc3,0xc3,0x00,0x0b,0x00,0x00,
|
||||||
|
0x00,0x05,0x0b,0x0b,0x07,0x00,0x00,0x18,0x08,0x10,0x60,0x90,0x00,0x60,0x90,0xf0,
|
||||||
|
0x80,0x70};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_199_199[33] U8G_FONT_SECTION("fontpage_61_199_199") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xc7,0xc7,0x00,0x08,0xfe,0x00,
|
||||||
|
0x00,0x05,0x0a,0x0a,0x07,0x00,0xfe,0x20,0x50,0x00,0x70,0x88,0xf0,0x80,0x78,0x00,
|
||||||
|
0x20};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_201_201[32] U8G_FONT_SECTION("fontpage_61_201_201") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xc9,0xc9,0x00,0x09,0x00,0x00,
|
||||||
|
0x00,0x03,0x09,0x09,0x07,0x02,0x00,0x60,0x20,0x40,0x00,0xc0,0x40,0x40,0x40,0xe0
|
||||||
|
};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_203_203[32] U8G_FONT_SECTION("fontpage_61_203_203") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xcb,0xcb,0x00,0x07,0xfe,0x00,
|
||||||
|
0x00,0x03,0x09,0x09,0x07,0x02,0xfe,0x40,0x00,0xc0,0x40,0x40,0x40,0xe0,0x00,0x40
|
||||||
|
};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_205_205[30] U8G_FONT_SECTION("fontpage_61_205_205") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xcd,0xcd,0x00,0x05,0xfe,0x00,
|
||||||
|
0x00,0x05,0x07,0x07,0x07,0x00,0xfe,0x70,0x88,0x88,0x88,0x70,0x00,0x20};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_207_207[32] U8G_FONT_SECTION("fontpage_61_207_207") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xcf,0xcf,0x00,0x09,0x00,0x00,
|
||||||
|
0x00,0x05,0x09,0x09,0x07,0x00,0x00,0x30,0x10,0x20,0x00,0x70,0x88,0x88,0x88,0x70
|
||||||
|
};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_209_209[33] U8G_FONT_SECTION("fontpage_61_209_209") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd1,0xd1,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x06,0x0a,0x0a,0x07,0x00,0x00,0x04,0x08,0x20,0x50,0x00,0x70,0x88,0x88,0x88,
|
||||||
|
0x70};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_211_211[33] U8G_FONT_SECTION("fontpage_61_211_211") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd3,0xd3,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x05,0x0a,0x0a,0x07,0x00,0x00,0x10,0x08,0x20,0x50,0x00,0x70,0x88,0x88,0x88,
|
||||||
|
0x70};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_213_213[33] U8G_FONT_SECTION("fontpage_61_213_213") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd5,0xd5,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x05,0x0a,0x0a,0x07,0x00,0x00,0x18,0x08,0x30,0x50,0x00,0x70,0x88,0x88,0x88,
|
||||||
|
0x70};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_215_215[34] U8G_FONT_SECTION("fontpage_61_215_215") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd7,0xd7,0x00,0x0b,0x00,0x00,
|
||||||
|
0x00,0x05,0x0b,0x0b,0x07,0x00,0x00,0x28,0x50,0x00,0x20,0x50,0x00,0x70,0x88,0x88,
|
||||||
|
0x88,0x70};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_217_217[33] U8G_FONT_SECTION("fontpage_61_217_217") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd9,0xd9,0x00,0x08,0xfe,0x00,
|
||||||
|
0x00,0x05,0x0a,0x0a,0x07,0x00,0xfe,0x20,0x50,0x00,0x70,0x88,0x88,0x88,0x70,0x00,
|
||||||
|
0x20};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_219_219[32] U8G_FONT_SECTION("fontpage_61_219_219") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xdb,0xdb,0x00,0x09,0x00,0x00,
|
||||||
|
0x00,0x05,0x09,0x09,0x07,0x00,0x00,0x20,0x40,0x10,0x08,0x70,0x88,0x88,0x88,0x70
|
||||||
|
};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_221_221[32] U8G_FONT_SECTION("fontpage_61_221_221") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xdd,0xdd,0x00,0x09,0x00,0x00,
|
||||||
|
0x00,0x05,0x09,0x09,0x07,0x00,0x00,0x80,0x40,0x10,0x08,0x70,0x88,0x88,0x88,0x70
|
||||||
|
};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_223_223[33] U8G_FONT_SECTION("fontpage_61_223_223") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xdf,0xdf,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x05,0x0a,0x0a,0x07,0x00,0x00,0x60,0x20,0x40,0x10,0x08,0x70,0x88,0x88,0x88,
|
||||||
|
0x70};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_225_225[32] U8G_FONT_SECTION("fontpage_61_225_225") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xe1,0xe1,0x00,0x09,0x00,0x00,
|
||||||
|
0x00,0x05,0x09,0x09,0x07,0x00,0x00,0x50,0xa0,0x10,0x08,0x70,0x88,0x88,0x88,0x70
|
||||||
|
};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_227_227[32] U8G_FONT_SECTION("fontpage_61_227_227") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xe3,0xe3,0x00,0x07,0xfe,0x00,
|
||||||
|
0x00,0x05,0x09,0x09,0x00,0x00,0xfe,0x10,0x08,0x70,0x88,0x88,0x88,0x70,0x00,0x20
|
||||||
|
};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_229_229[30] U8G_FONT_SECTION("fontpage_61_229_229") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xe5,0xe5,0x00,0x05,0xfe,0x00,
|
||||||
|
0x00,0x05,0x07,0x07,0x07,0x00,0xfe,0x88,0x88,0x88,0x88,0x70,0x00,0x20};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_231_231[33] U8G_FONT_SECTION("fontpage_61_231_231") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xe7,0xe7,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x05,0x0a,0x0a,0x07,0x00,0x00,0x30,0x10,0x20,0x00,0x00,0x88,0x88,0x88,0x88,
|
||||||
|
0x70};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_233_233[32] U8G_FONT_SECTION("fontpage_61_233_233") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xe9,0xe9,0x00,0x09,0x00,0x00,
|
||||||
|
0x00,0x06,0x09,0x09,0x07,0x00,0x00,0x10,0x20,0x0c,0x04,0x88,0x88,0x88,0x88,0x70
|
||||||
|
};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_235_235[32] U8G_FONT_SECTION("fontpage_61_235_235") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xeb,0xeb,0x00,0x09,0x00,0x00,
|
||||||
|
0x00,0x06,0x09,0x09,0x07,0x00,0x00,0x40,0x20,0x0c,0x04,0x88,0x88,0x88,0x88,0x70
|
||||||
|
};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_237_237[33] U8G_FONT_SECTION("fontpage_61_237_237") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xed,0xed,0x00,0x0a,0x00,0x00,
|
||||||
|
0x00,0x06,0x0a,0x0a,0x07,0x00,0x00,0x30,0x10,0x20,0x0c,0x04,0x88,0x88,0x88,0x88,
|
||||||
|
0x70};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_239_239[32] U8G_FONT_SECTION("fontpage_61_239_239") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xef,0xef,0x00,0x09,0x00,0x00,
|
||||||
|
0x00,0x06,0x09,0x09,0x07,0x00,0x00,0x28,0x50,0x0c,0x04,0x88,0x88,0x88,0x88,0x70
|
||||||
|
};
|
||||||
|
const u8g_fntpgm_uint8_t fontpage_61_241_241[32] U8G_FONT_SECTION("fontpage_61_241_241") = {
|
||||||
|
0x00,0x0c,0x0d,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xf1,0xf1,0x00,0x07,0xfe,0x00,
|
||||||
|
0x00,0x06,0x09,0x09,0x07,0x00,0xfe,0x0c,0x04,0x88,0x88,0x88,0x88,0x70,0x00,0x20
|
||||||
|
};
|
||||||
|
|
||||||
|
#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data }
|
||||||
|
static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {
|
||||||
|
FONTDATA_ITEM(2, 131, 131, fontpage_2_131_131), // 'ă' -- 'ă'
|
||||||
|
FONTDATA_ITEM(2, 144, 145, fontpage_2_144_145), // 'Đ' -- 'đ'
|
||||||
|
FONTDATA_ITEM(2, 169, 169, fontpage_2_169_169), // 'ĩ' -- 'ĩ'
|
||||||
|
FONTDATA_ITEM(3, 161, 161, fontpage_3_161_161), // 'ơ' -- 'ơ'
|
||||||
|
FONTDATA_ITEM(3, 175, 176, fontpage_3_175_176), // 'Ư' -- 'ư'
|
||||||
|
FONTDATA_ITEM(6, 131, 131, fontpage_6_131_131), // '̃' -- '̃'
|
||||||
|
FONTDATA_ITEM(6, 137, 137, fontpage_6_137_137), // '̉' -- '̉'
|
||||||
|
FONTDATA_ITEM(6, 163, 163, fontpage_6_163_163), // '̣' -- '̣'
|
||||||
|
FONTDATA_ITEM(6, 192, 193, fontpage_6_192_193), // '̀' -- '́'
|
||||||
|
FONTDATA_ITEM(61, 161, 161, fontpage_61_161_161), // 'ạ' -- 'ạ'
|
||||||
|
FONTDATA_ITEM(61, 163, 163, fontpage_61_163_163), // 'ả' -- 'ả'
|
||||||
|
FONTDATA_ITEM(61, 165, 165, fontpage_61_165_165), // 'ấ' -- 'ấ'
|
||||||
|
FONTDATA_ITEM(61, 167, 167, fontpage_61_167_167), // 'ầ' -- 'ầ'
|
||||||
|
FONTDATA_ITEM(61, 169, 169, fontpage_61_169_169), // 'ẩ' -- 'ẩ'
|
||||||
|
FONTDATA_ITEM(61, 173, 173, fontpage_61_173_173), // 'ậ' -- 'ậ'
|
||||||
|
FONTDATA_ITEM(61, 175, 175, fontpage_61_175_175), // 'ắ' -- 'ắ'
|
||||||
|
FONTDATA_ITEM(61, 177, 177, fontpage_61_177_177), // 'ằ' -- 'ằ'
|
||||||
|
FONTDATA_ITEM(61, 179, 179, fontpage_61_179_179), // 'ẳ' -- 'ẳ'
|
||||||
|
FONTDATA_ITEM(61, 181, 181, fontpage_61_181_181), // 'ẵ' -- 'ẵ'
|
||||||
|
FONTDATA_ITEM(61, 183, 183, fontpage_61_183_183), // 'ặ' -- 'ặ'
|
||||||
|
FONTDATA_ITEM(61, 187, 187, fontpage_61_187_187), // 'ẻ' -- 'ẻ'
|
||||||
|
FONTDATA_ITEM(61, 191, 191, fontpage_61_191_191), // 'ế' -- 'ế'
|
||||||
|
FONTDATA_ITEM(61, 193, 193, fontpage_61_193_193), // 'ề' -- 'ề'
|
||||||
|
FONTDATA_ITEM(61, 195, 195, fontpage_61_195_195), // 'ể' -- 'ể'
|
||||||
|
FONTDATA_ITEM(61, 199, 199, fontpage_61_199_199), // 'ệ' -- 'ệ'
|
||||||
|
FONTDATA_ITEM(61, 201, 201, fontpage_61_201_201), // 'ỉ' -- 'ỉ'
|
||||||
|
FONTDATA_ITEM(61, 203, 203, fontpage_61_203_203), // 'ị' -- 'ị'
|
||||||
|
FONTDATA_ITEM(61, 205, 205, fontpage_61_205_205), // 'ọ' -- 'ọ'
|
||||||
|
FONTDATA_ITEM(61, 207, 207, fontpage_61_207_207), // 'ỏ' -- 'ỏ'
|
||||||
|
FONTDATA_ITEM(61, 209, 209, fontpage_61_209_209), // 'ố' -- 'ố'
|
||||||
|
FONTDATA_ITEM(61, 211, 211, fontpage_61_211_211), // 'ồ' -- 'ồ'
|
||||||
|
FONTDATA_ITEM(61, 213, 213, fontpage_61_213_213), // 'ổ' -- 'ổ'
|
||||||
|
FONTDATA_ITEM(61, 215, 215, fontpage_61_215_215), // 'ỗ' -- 'ỗ'
|
||||||
|
FONTDATA_ITEM(61, 217, 217, fontpage_61_217_217), // 'ộ' -- 'ộ'
|
||||||
|
FONTDATA_ITEM(61, 219, 219, fontpage_61_219_219), // 'ớ' -- 'ớ'
|
||||||
|
FONTDATA_ITEM(61, 221, 221, fontpage_61_221_221), // 'ờ' -- 'ờ'
|
||||||
|
FONTDATA_ITEM(61, 223, 223, fontpage_61_223_223), // 'ở' -- 'ở'
|
||||||
|
FONTDATA_ITEM(61, 225, 225, fontpage_61_225_225), // 'ỡ' -- 'ỡ'
|
||||||
|
FONTDATA_ITEM(61, 227, 227, fontpage_61_227_227), // 'ợ' -- 'ợ'
|
||||||
|
FONTDATA_ITEM(61, 229, 229, fontpage_61_229_229), // 'ụ' -- 'ụ'
|
||||||
|
FONTDATA_ITEM(61, 231, 231, fontpage_61_231_231), // 'ủ' -- 'ủ'
|
||||||
|
FONTDATA_ITEM(61, 233, 233, fontpage_61_233_233), // 'ứ' -- 'ứ'
|
||||||
|
FONTDATA_ITEM(61, 235, 235, fontpage_61_235_235), // 'ừ' -- 'ừ'
|
||||||
|
FONTDATA_ITEM(61, 237, 237, fontpage_61_237_237), // 'ử' -- 'ử'
|
||||||
|
FONTDATA_ITEM(61, 239, 239, fontpage_61_239_239), // 'ữ' -- 'ữ'
|
||||||
|
FONTDATA_ITEM(61, 241, 241, fontpage_61_241_241), // 'ự' -- 'ự'
|
||||||
|
};
|
||||||
@ -0,0 +1,439 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Vietnamese
|
||||||
|
*
|
||||||
|
* LCD Menu Messages
|
||||||
|
* See also http://marlinfw.org/docs/development/lcd_language.html
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define CHARSIZE 2
|
||||||
|
|
||||||
|
#define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("àạậẵắấầđẻểếềìỉởộỗợúự")
|
||||||
|
|
||||||
|
#define WELCOME_MSG MACHINE_NAME _UxGT(" Sẵn sàng.") // Ready
|
||||||
|
#define MSG_BACK _UxGT("Trở lại") // Back
|
||||||
|
#define MSG_SD_INSERTED _UxGT("Thẻ được cắm vào") // Card inserted
|
||||||
|
#define MSG_SD_REMOVED _UxGT("Thẻ được rút ra")
|
||||||
|
#define MSG_LCD_ENDSTOPS _UxGT("Công tắc") // Endstops - công tắc hành trình
|
||||||
|
#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Công tắc mềm") // soft Endstops
|
||||||
|
#define MSG_MAIN _UxGT("Chính") // Main
|
||||||
|
#define MSG_ADVANCED_SETTINGS _UxGT("Thiết lập cấp cao") // Advanced Settings
|
||||||
|
#define MSG_CONFIGURATION _UxGT("Cấu hình") // Configuration
|
||||||
|
#define MSG_AUTOSTART _UxGT("Khởi chạy tự động") // Autostart
|
||||||
|
#define MSG_DISABLE_STEPPERS _UxGT("Tắt động cơ bước") // Disable steppers
|
||||||
|
#define MSG_DEBUG_MENU _UxGT("Menu gỡ lỗi") // Debug Menu
|
||||||
|
#define MSG_PROGRESS_BAR_TEST _UxGT("Kiểm tra tiến độ") // Progress bar test
|
||||||
|
#define MSG_AUTO_HOME _UxGT("Về nhà tự động") // Auto home
|
||||||
|
#define MSG_AUTO_HOME_X _UxGT("Về nhà X") // home x
|
||||||
|
#define MSG_AUTO_HOME_Y _UxGT("Về nhà Y") // home y
|
||||||
|
#define MSG_AUTO_HOME_Z _UxGT("Về nhà Z")
|
||||||
|
#define MSG_AUTO_Z_ALIGN _UxGT("Chỉnh canh Z tự động")
|
||||||
|
#define MSG_LEVEL_BED_HOMING _UxGT("Đang về nhà XYZ") // Homing XYZ
|
||||||
|
#define MSG_LEVEL_BED_WAITING _UxGT("Nhấn để bắt đầu") // Click to Begin
|
||||||
|
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Điểm tiếp theo") // Next Point
|
||||||
|
#define MSG_LEVEL_BED_DONE _UxGT("San lấp được hoàn thành") // Leveling Done!
|
||||||
|
#define MSG_Z_FADE_HEIGHT _UxGT("Chiều cao mờ dần") // Fade Height
|
||||||
|
#define MSG_SET_HOME_OFFSETS _UxGT("Đặt bù đắp nhà") // Set home offsets
|
||||||
|
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Bù đắp được áp dụng") // Offsets applied
|
||||||
|
#define MSG_SET_ORIGIN _UxGT("Đặt nguồn gốc") // Set origin
|
||||||
|
#define MSG_PREHEAT_1 _UxGT("Làm nóng " PREHEAT_1_LABEL " trước") // Preheat
|
||||||
|
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
|
||||||
|
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tất cả") // all
|
||||||
|
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Đầu")
|
||||||
|
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Bàn") // bed -- using vietnamese term for 'table' instead
|
||||||
|
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Cấu hình") // conf
|
||||||
|
#define MSG_PREHEAT_2 _UxGT("Làm nóng " PREHEAT_2_LABEL " trước")
|
||||||
|
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
|
||||||
|
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tất cả")
|
||||||
|
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Đầu")
|
||||||
|
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bàn") // bed -- using vietnamese term for 'table' instead
|
||||||
|
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" Cấu hình")
|
||||||
|
#define MSG_PREHEAT_CUSTOM _UxGT("Sự nóng trước tự chọn") // Preheat Custom
|
||||||
|
#define MSG_COOLDOWN _UxGT("Nguội xuống") // Cooldown
|
||||||
|
#define MSG_SWITCH_PS_ON _UxGT("Bật nguồn") // Switch power on
|
||||||
|
#define MSG_SWITCH_PS_OFF _UxGT("Tắt nguồn") // Switch power off
|
||||||
|
#define MSG_EXTRUDE _UxGT("Ép đùn") // Extrude
|
||||||
|
#define MSG_RETRACT _UxGT("Rút lại") // Retract
|
||||||
|
#define MSG_MOVE_AXIS _UxGT("Di chuyển trục") // Move axis
|
||||||
|
#define MSG_BED_LEVELING _UxGT("San Lấp Bàn") // Bed Leveling
|
||||||
|
#define MSG_LEVEL_BED _UxGT("Làm bằng mặt bàn") // Level bed
|
||||||
|
#define MSG_LEVEL_CORNERS _UxGT("Làm bằng góc bàn") // Level corners
|
||||||
|
#define MSG_NEXT_CORNER _UxGT("Góc tiếp theo") // Next corner
|
||||||
|
#define MSG_EDITING_STOPPED _UxGT("Chỉnh lưới đã dừng") // Mesh Editing Stopped
|
||||||
|
#define MSG_MESH_X _UxGT("Mục lục X") // Index X
|
||||||
|
#define MSG_MESH_Y _UxGT("Mục lục Y")
|
||||||
|
#define MSG_MESH_EDIT_Z _UxGT("Giá trị Z") // Z Value
|
||||||
|
#define MSG_USER_MENU _UxGT("Các lệnh tự chọn") // Custom Commands
|
||||||
|
#define MSG_UBL_DOING_G29 _UxGT("Đang chạy G29") // Doing G29
|
||||||
|
#define MSG_UBL_UNHOMED _UxGT("Về nhà XYZ trước")
|
||||||
|
#define MSG_UBL_TOOLS _UxGT("Công cụ UBL") // UBL tools
|
||||||
|
#define MSG_UBL_LEVEL_BED _UxGT("San Lấp Bàn Thống Nhất (UBL)") // Unified Bed Leveling
|
||||||
|
#define MSG_IDEX_MENU _UxGT("chế độ IDEX") // IDEX Mode
|
||||||
|
#define MSG_IDEX_MODE_AUTOPARK _UxGT("Đậu tự động") // Auto-Park
|
||||||
|
#define MSG_IDEX_MODE_DUPLICATE _UxGT("Sự gấp đôi") // Duplication
|
||||||
|
#define MSG_IDEX_MODE_SCALED_COPY _UxGT("Bản sao thu nhỏ")
|
||||||
|
#define MSG_IDEX_MODE_FULL_CTRL _UxGT("Toàn quyền điều khiển") // Full control
|
||||||
|
#define MSG_IDEX_X_OFFSET _UxGT("Đầu phun X nhì") // 2nd nozzle X
|
||||||
|
#define MSG_IDEX_Y_OFFSET _UxGT("Đầu phun Y nhì")
|
||||||
|
#define MSG_IDEX_Z_OFFSET _UxGT("Đầu phun Z nhì")
|
||||||
|
#define MSG_IDEX_SAVE_OFFSETS _UxGT("Lưu bù đắp") // Save offsets
|
||||||
|
#define MSG_UBL_MANUAL_MESH _UxGT("Tự xây dựng lưới") // Manually Build Mesh
|
||||||
|
#define MSG_UBL_BC_INSERT _UxGT("Đặt chêm và đo") // Place shim & measure
|
||||||
|
#define MSG_UBL_BC_INSERT2 _UxGT("Đo") // Measure
|
||||||
|
#define MSG_UBL_BC_REMOVE _UxGT("Tháo và đo bàn") // Remove & measure bed
|
||||||
|
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Chuyển sang tiếp theo") // moving to next
|
||||||
|
#define MSG_UBL_ACTIVATE_MESH _UxGT("Bật UBL")
|
||||||
|
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Tắt UBL")
|
||||||
|
#define MSG_UBL_SET_TEMP_BED _UxGT("Nhiệt độ bàn") // Bed Temp
|
||||||
|
#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
|
||||||
|
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Nhiệt độ đầu phun") // Hotend Temp
|
||||||
|
#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
|
||||||
|
#define MSG_UBL_MESH_EDIT _UxGT("Chỉnh sửa lưới") // Mesh Edit
|
||||||
|
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Chỉnh sửa lưới tự chọn") // Edit Custom Mesh
|
||||||
|
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Chỉnh lưới chính xác") // Fine tuning mesh
|
||||||
|
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Chỉnh sửa xong lưới") // Done Editing Mesh
|
||||||
|
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Xây dựng lưới tự chọn") // Build Custom Mesh
|
||||||
|
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Xây dựng lưới") // Build Mesh
|
||||||
|
#define MSG_UBL_BUILD_MESH_M1 _UxGT("Xây dựng lưới (" PREHEAT_1_LABEL ")")
|
||||||
|
#define MSG_UBL_BUILD_MESH_M2 _UxGT("Xây dựng lưới (" PREHEAT_2_LABEL ")")
|
||||||
|
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Xây dựng lưới lạnh") // Build cold mesh
|
||||||
|
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Điều chỉnh chiều cao lưới") // Adjust Mesh Height
|
||||||
|
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Số lượng chiều cao") // Height Amount
|
||||||
|
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Thẩm tra lưới") // Validate Mesh
|
||||||
|
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Thẩm tra lưới (" PREHEAT_1_LABEL ")")
|
||||||
|
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Thẩm tra lưới (" PREHEAT_2_LABEL ")")
|
||||||
|
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Thẩm tra lưới tự chọn") // validate custom mesh
|
||||||
|
#define MSG_UBL_CONTINUE_MESH _UxGT("Tiếp tục xây lưới bàn") // Continue Bed Mesh
|
||||||
|
#define MSG_UBL_MESH_LEVELING _UxGT("Đang san lấp lưới") // Mesh Leveling
|
||||||
|
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Đang san lấp 3-điểm") // 3-Point Leveling
|
||||||
|
#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Đang san lấp lưới phẳng") // Grid (planar) Mesh Leveling
|
||||||
|
#define MSG_UBL_MESH_LEVEL _UxGT("Làm bằng lưới") // Level Mesh
|
||||||
|
#define MSG_UBL_SIDE_POINTS _UxGT("Điểm bên cạnh") // Side Points
|
||||||
|
#define MSG_UBL_MAP_TYPE _UxGT("Loại bản đồ") // Map Type
|
||||||
|
#define MSG_UBL_OUTPUT_MAP _UxGT("Đầu ra bản đồ lưới") // Output Mesh Map
|
||||||
|
#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Đầu ra cho máy chủ") // Output for Host
|
||||||
|
#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Đầu ra cho CSV") // Output for CSV
|
||||||
|
#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Hỗ trợ lưới") // Off Printer Backup | backup mesh
|
||||||
|
#define MSG_UBL_INFO_UBL _UxGT("Đầu ra thông tin UBL") // Output UBL Info
|
||||||
|
#define MSG_EDIT_MESH _UxGT("Chỉnh sửa lưới") // Edit mesh
|
||||||
|
#define MSG_UBL_FILLIN_AMOUNT _UxGT("Số lượng lấp đầy") // Fill-in Amount
|
||||||
|
#define MSG_UBL_MANUAL_FILLIN _UxGT("Tự lấp đầy") // Manual Fill-in
|
||||||
|
#define MSG_UBL_SMART_FILLIN _UxGT("Lấp đầy thông minh") // Smart Fill-in
|
||||||
|
#define MSG_UBL_FILLIN_MESH _UxGT("Lưới lấp đầy") // Fill-in Mesh
|
||||||
|
#define MSG_UBL_INVALIDATE_ALL _UxGT("Bác bỏ tất cả") // Invalidate All
|
||||||
|
#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Bác bỏ gần nhất") // Invalidate Closest
|
||||||
|
#define MSG_UBL_FINE_TUNE_ALL _UxGT("Chỉnh chính xác tất cả") // Fine Tune ALl
|
||||||
|
#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Chỉnh chính xác gần nhất") // Fine Tune Closest
|
||||||
|
#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Lưu trữ lưới") // Mesh Storage
|
||||||
|
#define MSG_UBL_STORAGE_SLOT _UxGT("Khe nhớ") // Memory Slot
|
||||||
|
#define MSG_UBL_LOAD_MESH _UxGT("Tải lưới bàn") // Load Bed Mesh
|
||||||
|
#define MSG_UBL_SAVE_MESH _UxGT("Lưu lưới bàn") // Save Bed Mesh
|
||||||
|
#define MSG_MESH_LOADED _UxGT("%i lưới được nạp") // Mesh %i loaded
|
||||||
|
#define MSG_MESH_SAVED _UxGT("%i lưới đã lưu")
|
||||||
|
#define MSG_NO_STORAGE _UxGT("Không lưu trữ") // No Storage
|
||||||
|
#define MSG_UBL_SAVE_ERROR _UxGT("Điều sai: Lưu UBL") // Err: UBL Save
|
||||||
|
#define MSG_UBL_RESTORE_ERROR _UxGT("Điều Sai: Khôi Phục UBL") // Err: UBL Restore
|
||||||
|
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Đầu Dò-Z Đã Ngừng") // Z-Offset Stopped
|
||||||
|
#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Bước-Từng-Bước UBL") // Step-By-Step UBL
|
||||||
|
|
||||||
|
#define MSG_LED_CONTROL _UxGT("Điều khiển LED") // LED Control
|
||||||
|
#define MSG_LEDS _UxGT("Đèn") // Lights
|
||||||
|
#define MSG_LED_PRESETS _UxGT("Đèn định sẵn") // Light Presets
|
||||||
|
#define MSG_SET_LEDS_RED _UxGT("Đỏ") // Red
|
||||||
|
#define MSG_SET_LEDS_ORANGE _UxGT("Cam") // Orange
|
||||||
|
#define MSG_SET_LEDS_YELLOW _UxGT("Vàng") // Yellow
|
||||||
|
#define MSG_SET_LEDS_GREEN _UxGT("Xanh Lá") // Green
|
||||||
|
#define MSG_SET_LEDS_BLUE _UxGT("Xanh") // Blue
|
||||||
|
#define MSG_SET_LEDS_INDIGO _UxGT("Xanh Đậm") // Indigo
|
||||||
|
#define MSG_SET_LEDS_VIOLET _UxGT("Tím") // Violet
|
||||||
|
#define MSG_SET_LEDS_WHITE _UxGT("Trắng") // White
|
||||||
|
#define MSG_SET_LEDS_DEFAULT _UxGT("Mặc định") // Default
|
||||||
|
#define MSG_CUSTOM_LEDS _UxGT("Đèn Tự Chọn") // Custom Lights
|
||||||
|
#define MSG_INTENSITY_R _UxGT("Cường Độ Đỏ") // Red Intensity
|
||||||
|
#define MSG_INTENSITY_G _UxGT("Cường Độ Xanh Lá") // Green Intensity
|
||||||
|
#define MSG_INTENSITY_B _UxGT("Cường Độ Xanh") // Blue Intensity
|
||||||
|
#define MSG_INTENSITY_W _UxGT("Cường Độ Trắng") // White Intensity
|
||||||
|
#define MSG_LED_BRIGHTNESS _UxGT("độ sáng") // Brightness
|
||||||
|
|
||||||
|
#define MSG_MOVING _UxGT("Di chuyển...") // Moving
|
||||||
|
#define MSG_FREE_XY _UxGT("Giải phóng XY") // Free XY
|
||||||
|
#define MSG_MOVE_X _UxGT("Di chuyển X") // Move X
|
||||||
|
#define MSG_MOVE_Y _UxGT("Di chuyển Y")
|
||||||
|
#define MSG_MOVE_Z _UxGT("Di chuyển Z")
|
||||||
|
#define MSG_MOVE_E _UxGT("Máy đùn") // Extruder
|
||||||
|
#define MSG_HOTEND_TOO_COLD _UxGT("Đầu nóng quá lạnh") // Hotend too cold
|
||||||
|
#define MSG_MOVE_01MM _UxGT("Di chuyển 0.1mm") // Move 0.1mm
|
||||||
|
#define MSG_MOVE_1MM _UxGT("Di chuyển 1mm") // Move 1mm
|
||||||
|
#define MSG_MOVE_10MM _UxGT("Di chuyển 10mm") // Move 10mm
|
||||||
|
#define MSG_SPEED _UxGT("Tốc độ") // Speed
|
||||||
|
#define MSG_BED_Z _UxGT("Z Bàn")
|
||||||
|
#define MSG_NOZZLE _UxGT("Đầu phun") // Nozzle
|
||||||
|
#define MSG_BED _UxGT("Bàn") // bed
|
||||||
|
#define MSG_FAN_SPEED _UxGT("Tốc độ quạt") // fan speed
|
||||||
|
#define MSG_EXTRA_FAN_SPEED _UxGT("Tốc độ quạt phụ") // Extra fan speed
|
||||||
|
#define MSG_FLOW _UxGT("Lưu Lượng")
|
||||||
|
#define MSG_CONTROL _UxGT("Điều khiển") // Control
|
||||||
|
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Đa") // min
|
||||||
|
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Thiểu")
|
||||||
|
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Hệ Số") // factor
|
||||||
|
#define MSG_AUTOTEMP _UxGT("Nhiệt độ tự động") // Autotemp
|
||||||
|
#define MSG_LCD_ON _UxGT("Bật") // on
|
||||||
|
#define MSG_LCD_OFF _UxGT("Tắt") // off
|
||||||
|
#define MSG_PID_P _UxGT("PID-P")
|
||||||
|
#define MSG_PID_I _UxGT("PID-I")
|
||||||
|
#define MSG_PID_D _UxGT("PID-D")
|
||||||
|
#define MSG_PID_C _UxGT("PID-C")
|
||||||
|
#define MSG_SELECT _UxGT("Lựa") // Select
|
||||||
|
#define MSG_ACC _UxGT("Tăng Tốc")
|
||||||
|
#define MSG_JERK _UxGT("Giật")
|
||||||
|
#if IS_KINEMATIC
|
||||||
|
#define MSG_VA_JERK _UxGT("Giật-Va")
|
||||||
|
#define MSG_VB_JERK _UxGT("Giật-Vb")
|
||||||
|
#define MSG_VC_JERK _UxGT("Giật-Vc")
|
||||||
|
#else
|
||||||
|
#define MSG_VA_JERK _UxGT("Giật-Vx")
|
||||||
|
#define MSG_VB_JERK _UxGT("Giật-Vy")
|
||||||
|
#define MSG_VC_JERK _UxGT("Giật-Vz")
|
||||||
|
#endif
|
||||||
|
#define MSG_VE_JERK _UxGT("Giật-Ve")
|
||||||
|
#define MSG_JUNCTION_DEVIATION _UxGT("Độ Lệch Chỗ Giao") // Junction Dev
|
||||||
|
#define MSG_VELOCITY _UxGT("Vận tốc") // velocity
|
||||||
|
#define MSG_VMAX _UxGT("Vđa") // Vmax
|
||||||
|
#define MSG_VMIN _UxGT("Vthiểu") // Vmin
|
||||||
|
#define MSG_VTRAV_MIN _UxGT("Vchuyển thiểu") // VTrav min
|
||||||
|
#define MSG_ACCELERATION _UxGT("Sự tăng tốc") // Acceleration
|
||||||
|
#define MSG_AMAX _UxGT("Tăng tốc ca") // Amax
|
||||||
|
#define MSG_A_RETRACT _UxGT("TT-Rút") // A-retract
|
||||||
|
#define MSG_A_TRAVEL _UxGT("TT-Chuyển") // A-travel
|
||||||
|
#define MSG_STEPS_PER_MM _UxGT("Bước/mm") // Steps
|
||||||
|
#if IS_KINEMATIC
|
||||||
|
#define MSG_ASTEPS _UxGT("BướcA/mm") // Asteps/mm
|
||||||
|
#define MSG_BSTEPS _UxGT("BướcB/mm")
|
||||||
|
#define MSG_CSTEPS _UxGT("BướcC/mm")
|
||||||
|
#else
|
||||||
|
#define MSG_ASTEPS _UxGT("BướcX/mm") // Xsteps/mm
|
||||||
|
#define MSG_BSTEPS _UxGT("BướcY/mm")
|
||||||
|
#define MSG_CSTEPS _UxGT("BướcZ/mm")
|
||||||
|
#endif
|
||||||
|
#define MSG_ESTEPS _UxGT("BướcE/mm")
|
||||||
|
#define MSG_E1STEPS _UxGT("BướcE1/mm")
|
||||||
|
#define MSG_E2STEPS _UxGT("BướcE2/mm")
|
||||||
|
#define MSG_E3STEPS _UxGT("BướcE3/mm")
|
||||||
|
#define MSG_E4STEPS _UxGT("BướcE4/mm")
|
||||||
|
#define MSG_E5STEPS _UxGT("BướcE5/mm")
|
||||||
|
#define MSG_E6STEPS _UxGT("BướcE6/mm")
|
||||||
|
#define MSG_TEMPERATURE _UxGT("Nhiệt độ") // Temperature
|
||||||
|
#define MSG_MOTION _UxGT("Chuyển động") // Motion
|
||||||
|
#define MSG_FILAMENT _UxGT("Vật liệu in") // dây nhựa
|
||||||
|
#define MSG_VOLUMETRIC_ENABLED _UxGT("E bằng mm") MSG_CUBED // E in mm
|
||||||
|
#define MSG_FILAMENT_DIAM _UxGT("Đường kính nhựa") // Fil. Dai.
|
||||||
|
#define MSG_FILAMENT_UNLOAD _UxGT("Dỡ mm") // unload mm
|
||||||
|
#define MSG_FILAMENT_LOAD _UxGT("Nạp mm")
|
||||||
|
#define MSG_ADVANCE_K _UxGT("K Cấp Cao") // Advance K
|
||||||
|
#define MSG_CONTRAST _UxGT("Độ tương phản LCD") // LCD contrast
|
||||||
|
#define MSG_STORE_EEPROM _UxGT("Lưu các thiết lập") // Store settings
|
||||||
|
#define MSG_LOAD_EEPROM _UxGT("Tải các cài đặt") // Load settings
|
||||||
|
#define MSG_RESTORE_FAILSAFE _UxGT("Khôi phục phòng hư") // Restore failsafe
|
||||||
|
#define MSG_INIT_EEPROM _UxGT("Khởi Tạo EEPROM") // Initialize EEPROM
|
||||||
|
#define MSG_SD_UPDATE _UxGT("Cập Nhật SD") // SD Update
|
||||||
|
#define MSG_RESET_PRINTER _UxGT("Bặt Lại Máy In")
|
||||||
|
#define MSG_REFRESH _UxGT("Cập Nhật") // Refresh
|
||||||
|
#define MSG_WATCH _UxGT("Màn Hình Thông Tin") // Info screen
|
||||||
|
#define MSG_PREPARE _UxGT("Chuẩn bị") // Prepare
|
||||||
|
#define MSG_TUNE _UxGT("Điều Chỉnh") // Tune
|
||||||
|
#define MSG_PAUSE_PRINT _UxGT("Tạm dừng in") // Pause print
|
||||||
|
#define MSG_RESUME_PRINT _UxGT("Tiếp tục in") // Resume print
|
||||||
|
#define MSG_STOP_PRINT _UxGT("Ngừng in") // Stop print
|
||||||
|
#define MSG_OUTAGE_RECOVERY _UxGT("Phục Hồi Mất Điện") // Outage Recovery
|
||||||
|
#define MSG_CARD_MENU _UxGT("In từ SD") // Print from SD
|
||||||
|
#define MSG_NO_CARD _UxGT("Không có thẻ SD") // No SD card
|
||||||
|
#define MSG_DWELL _UxGT("Ngủ...") // Sleep
|
||||||
|
#define MSG_USERWAIT _UxGT("Nhấn để tiếp tục...") // Click to resume (same as 'continue')
|
||||||
|
#define MSG_PRINT_PAUSED _UxGT("In tạm dừng") // print paused
|
||||||
|
#define MSG_PRINTING _UxGT("Đang in...") // printing
|
||||||
|
#define MSG_PRINT_ABORTED _UxGT("In đã hủy bỏ") // Print aborted
|
||||||
|
#define MSG_NO_MOVE _UxGT("Không di chuyển.") // No move.
|
||||||
|
#define MSG_KILLED _UxGT("ĐÃ CHẾT. ")
|
||||||
|
#define MSG_STOPPED _UxGT("ĐÃ NGỪNG. ")
|
||||||
|
#define MSG_CONTROL_RETRACT _UxGT("Rút mm") // Retract mm
|
||||||
|
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Rút Trao.mm") // Swap Re.mm
|
||||||
|
#define MSG_CONTROL_RETRACTF _UxGT("Rút V")
|
||||||
|
#define MSG_CONTROL_RETRACT_ZHOP _UxGT("Nhảy mm") // hop
|
||||||
|
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("BỏRút mm") // UnRet mm
|
||||||
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("BỏRút T mm") // S UnRet mm
|
||||||
|
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("BỏRút V") // UnRet V
|
||||||
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("BỏRút T V") // S UnRet V
|
||||||
|
#define MSG_AUTORETRACT _UxGT("RútTựĐộng") // AutoRetr.
|
||||||
|
#define MSG_FILAMENT_SWAP_LENGTH _UxGT("Khoảng Cách Rút") // Retract Distance
|
||||||
|
#define MSG_TOOL_CHANGE _UxGT("Thay Đổi Công Cụ") // Tool Change
|
||||||
|
#define MSG_TOOL_CHANGE_ZLIFT _UxGT("Đưa Lên Z") // Z Raise
|
||||||
|
#define MSG_SINGLENOZZLE_PRIME_SPD _UxGT("Tốc Độ Tuôn Ra") // Prime Speed
|
||||||
|
#define MSG_SINGLENOZZLE_RETRACT_SPD _UxGT("Tốc Độ Rút Lại") // Retract Speed
|
||||||
|
#define MSG_FILAMENTCHANGE _UxGT("Thay dây nhựa") // change filament
|
||||||
|
#define MSG_FILAMENTLOAD _UxGT("Nạp dây nhựa") // load filament
|
||||||
|
#define MSG_FILAMENTUNLOAD _UxGT("Dỡ dây nhựa") // unload filament
|
||||||
|
#define MSG_FILAMENTUNLOAD_ALL _UxGT("Dỡ tất cả") // Unload All
|
||||||
|
#define MSG_INIT_SDCARD _UxGT("Khởi tạo thẻ SD ") // Init. SD card
|
||||||
|
#define MSG_CHANGE_SDCARD _UxGT("Thay thẻ SD") // Change SD card
|
||||||
|
#define MSG_ZPROBE_OUT _UxGT("Đầu Dò Z qua bàn") // Z Probe past bed
|
||||||
|
#define MSG_SKEW_FACTOR _UxGT("Hệ số nghiêng") // Skew Factor
|
||||||
|
#define MSG_BLTOUCH _UxGT("BLTOUCH") // BLTouch
|
||||||
|
#define MSG_BLTOUCH_SELFTEST _UxGT("Tự kiểm tra BLTOUCH ") // BLTouch Self-Test
|
||||||
|
#define MSG_BLTOUCH_RESET _UxGT("Bặt lại BLTouch") // Reset BLTouch
|
||||||
|
#define MSG_BLTOUCH_DEPLOY _UxGT("Đem BLTouch") // Deploy BLTouch
|
||||||
|
#define MSG_BLTOUCH_STOW _UxGT("Cất BLTouch") // Stow BLTouch
|
||||||
|
#define MSG_MANUAL_DEPLOY _UxGT("Đem Đầu Dò-Z") // Deploy Z-Probe
|
||||||
|
#define MSG_MANUAL_STOW _UxGT("Cất Đầu Dò-Z") // Stow Z-Probe
|
||||||
|
#define MSG_HOME _UxGT("Về nhà") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
||||||
|
#define MSG_FIRST _UxGT("Trước")
|
||||||
|
#define MSG_ZPROBE_ZOFFSET _UxGT("Đầu Dò Bù Đắp Z") // Probe Z Offset
|
||||||
|
#define MSG_BABYSTEP_X _UxGT("Nhít X") // Babystep X
|
||||||
|
#define MSG_BABYSTEP_Y _UxGT("Nhít Y")
|
||||||
|
#define MSG_BABYSTEP_Z _UxGT("Nhít Z")
|
||||||
|
#define MSG_ENDSTOP_ABORT _UxGT("Hủy bỏ công tắc") // Endstop abort
|
||||||
|
#define MSG_HEATING_FAILED_LCD _UxGT("Sưởi đầu phun không thành công") // Heating failed
|
||||||
|
#define MSG_HEATING_FAILED_LCD_BED _UxGT("Sưởi bàn không thành công") // Bed heating failed
|
||||||
|
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Điều sai: nhiệt độ dư") // Err: REDUNDANT TEMP
|
||||||
|
#define MSG_THERMAL_RUNAWAY _UxGT("Vấn đề nhiệt") // THERMAL RUNAWAY | problem
|
||||||
|
#define MSG_THERMAL_RUNAWAY_BED _UxGT("Vấn đề nhiệt bàn") // BED THERMAL RUNAWAY
|
||||||
|
#define MSG_ERR_MAXTEMP _UxGT("Điều sai: nhiệt độ tối đa") // Err: MAXTEMP
|
||||||
|
#define MSG_ERR_MINTEMP _UxGT("Điều sai: nhiệt độ tối thiểu") // Err: MINTEMP
|
||||||
|
#define MSG_ERR_MAXTEMP_BED _UxGT("Điều sai: nhiệt độ bàn tối đa") // Err: MAXTEMP BED
|
||||||
|
#define MSG_ERR_MINTEMP_BED _UxGT("Điều sai: nhiệt độ bàn tối thiểu") // Err: MINTEMP BED
|
||||||
|
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
|
||||||
|
#define MSG_HALTED _UxGT("MÁY IN ĐÃ DỪNG LẠI") // PRINTER HALTED
|
||||||
|
#define MSG_PLEASE_RESET _UxGT("Xin bặt lại") // Please reset
|
||||||
|
#define MSG_SHORT_DAY _UxGT("n") // d - ngày - One character only
|
||||||
|
#define MSG_SHORT_HOUR _UxGT("g") // h - giờ - One character only
|
||||||
|
#define MSG_SHORT_MINUTE _UxGT("p") // m - phút - One character only
|
||||||
|
#define MSG_HEATING _UxGT("Đang sưởi nóng...") // heating
|
||||||
|
#define MSG_COOLING _UxGT("Đang làm nguội...") // cooling
|
||||||
|
#define MSG_BED_HEATING _UxGT("Đang sưởi nong bàn...") // bed heating
|
||||||
|
#define MSG_BED_COOLING _UxGT("Đang làm nguội bàn...") // bed cooling
|
||||||
|
#define MSG_DELTA_CALIBRATE _UxGT("Cân Chỉnh Delta") // Delta calibration
|
||||||
|
#define MSG_DELTA_CALIBRATE_X _UxGT("Chỉnh X lại")
|
||||||
|
#define MSG_DELTA_CALIBRATE_Y _UxGT("Chỉnh Y lại")
|
||||||
|
#define MSG_DELTA_CALIBRATE_Z _UxGT("Chỉnh Z lại")
|
||||||
|
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Chỉnh Z Center") // Calibrate Center
|
||||||
|
#define MSG_DELTA_SETTINGS _UxGT("Cài Đặt Delta") // Delta Settings
|
||||||
|
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Cân Chỉnh Tự Động") // Auto Calibration
|
||||||
|
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Đặt Chiều Cao Delta") // Set Delta Height
|
||||||
|
#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Đầu Dò Z-Bù Đắp") // Probe Z-offset
|
||||||
|
#define MSG_DELTA_DIAG_ROD _UxGT("Gậy Chéo") // Diag Rod
|
||||||
|
#define MSG_DELTA_HEIGHT _UxGT("Chiều Cao") // Height
|
||||||
|
#define MSG_DELTA_RADIUS _UxGT("Bán Kính") // Radius
|
||||||
|
#define MSG_INFO_MENU _UxGT("Về Máy In")
|
||||||
|
#define MSG_INFO_PRINTER_MENU _UxGT("Thông Tin Máy In") // Printer Info
|
||||||
|
#define MSG_3POINT_LEVELING _UxGT("San lấp 3-Điểm") // 3-Point Leveling
|
||||||
|
#define MSG_LINEAR_LEVELING _UxGT("San Lấp Tuyến Tính") // Linear Leveling
|
||||||
|
#define MSG_BILINEAR_LEVELING _UxGT("San Lấp Song Tuyến") // Bilinear Leveling
|
||||||
|
#define MSG_UBL_LEVELING _UxGT("San Lấp Bàn Thống Nhất") // Unified Bed Leveling
|
||||||
|
#define MSG_MESH_LEVELING _UxGT("Lưới San Lấp") // Mesh Leveling
|
||||||
|
#define MSG_INFO_STATS_MENU _UxGT("Thống Kê Máy In") // Printer Stats
|
||||||
|
#define MSG_INFO_BOARD_MENU _UxGT("Thông Tin Bo Mạch") // Board Info
|
||||||
|
#define MSG_INFO_THERMISTOR_MENU _UxGT("Điện Trở Nhiệt") // Thermistors
|
||||||
|
#define MSG_INFO_EXTRUDERS _UxGT("Máy đùn") // Extruders
|
||||||
|
#define MSG_INFO_BAUDRATE _UxGT("Baud") // Baud
|
||||||
|
#define MSG_INFO_PROTOCOL _UxGT("Giao Thức") // Protocol
|
||||||
|
#define MSG_CASE_LIGHT _UxGT("Đèn Khuông") // Case light
|
||||||
|
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Độ Sáng") // Light Brightness
|
||||||
|
#if LCD_WIDTH >= 20
|
||||||
|
#define MSG_INFO_PRINT_COUNT _UxGT("Số In") // Print Count
|
||||||
|
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Đã hoàn thành")
|
||||||
|
#define MSG_INFO_PRINT_TIME _UxGT("Tổng số thời gian in") // Total print time
|
||||||
|
#define MSG_INFO_PRINT_LONGEST _UxGT("Thời gian việc lâu nhất") // Longest job time
|
||||||
|
#define MSG_INFO_PRINT_FILAMENT _UxGT("Tổng số đùn") // Extruded total
|
||||||
|
#else
|
||||||
|
#define MSG_INFO_PRINT_COUNT _UxGT("In") // prints
|
||||||
|
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Đã hoàn thành") // Completed
|
||||||
|
#define MSG_INFO_PRINT_TIME _UxGT("Tổng số") // total
|
||||||
|
#define MSG_INFO_PRINT_LONGEST _UxGT("Dài nhất") // Longest
|
||||||
|
#define MSG_INFO_PRINT_FILAMENT _UxGT("Đã ép đùn")
|
||||||
|
#endif
|
||||||
|
#define MSG_INFO_MIN_TEMP _UxGT("Nhiệt độ tối thiểu") // Min Temp
|
||||||
|
#define MSG_INFO_MAX_TEMP _UxGT("Nhiệt độ tối đa") // Max temp
|
||||||
|
#define MSG_INFO_PSU _UxGT("Bộ nguồn") // PSU
|
||||||
|
#define MSG_DRIVE_STRENGTH _UxGT("Sức mạnh ổ đĩa") // Drive Strength
|
||||||
|
#define MSG_DAC_PERCENT _UxGT("% trình điều khiển") // Driver %
|
||||||
|
#define MSG_DAC_EEPROM_WRITE _UxGT("Ghi DAC EEPROM") // DAC EEPROM Write
|
||||||
|
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("In tạm dừng") // PRINT PAUSED
|
||||||
|
#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("Nạp dây nhựa")
|
||||||
|
#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("Dỡ dây nhựa") // unload filament
|
||||||
|
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("Tùy chọn hồi phục:") // RESUME OPTIONS
|
||||||
|
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Xả thêm") // Purge more
|
||||||
|
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Tiếp tục") // continue
|
||||||
|
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Đầu Phun: ") // Nozzle
|
||||||
|
#define MSG_RUNOUT_SENSOR_ENABLE _UxGT("Cảm Biến Hết") // Runout Sensor
|
||||||
|
#define MSG_ERR_HOMING_FAILED _UxGT("Sự nhà không thành công") // Homing failed
|
||||||
|
#define MSG_ERR_PROBING_FAILED _UxGT(" không thành công") // Probing failed
|
||||||
|
#define MSG_M600_TOO_COLD _UxGT("M600: Quá lạnh")
|
||||||
|
|
||||||
|
//
|
||||||
|
// Filament Change screens show up to 3 lines on a 4-line display
|
||||||
|
// ...or up to 2 lines on a 3-line display
|
||||||
|
//
|
||||||
|
#if LCD_HEIGHT >= 4
|
||||||
|
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Nhấn nút") // Press button
|
||||||
|
#define MSG_ADVANCED_PAUSE_WAITING_2 _UxGT("để tiếp tục in") // to resume print
|
||||||
|
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Chờ cho sự") // wait for
|
||||||
|
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("thay đổi dây nhựa") // filament change
|
||||||
|
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("bắt đầu") // to start
|
||||||
|
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Đút dây nhựa vào") // insert filament
|
||||||
|
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("và nhấn nút") // and press button
|
||||||
|
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("để tiếp tục") // to continue
|
||||||
|
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Nhấn nút") // Press button
|
||||||
|
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("để làm nóng đầu phun") // to heat nozzle
|
||||||
|
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Đầu phun đang nóng lên") // Nozzle heating
|
||||||
|
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Xin chờ...") // Please wait
|
||||||
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Chờ tro") // Wait for
|
||||||
|
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("dây nhựa ra") // filament unload
|
||||||
|
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chờ tro")
|
||||||
|
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("dây nhựa vào")
|
||||||
|
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Chờ tro") // wait for filament purge
|
||||||
|
#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("xả dây nhựa")
|
||||||
|
#define MSG_FILAMENT_CHANGE_CONT_PURGE_1 _UxGT("Nhấn nút để kết thúc") // Click to finish
|
||||||
|
#define MSG_FILAMENT_CHANGE_CONT_PURGE_2 _UxGT("xả dây nhựa") // dây nhựa purge
|
||||||
|
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Chờ tro in") // Wait for print to resume
|
||||||
|
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("tiếp tục...")
|
||||||
|
#else // LCD_HEIGHT < 4
|
||||||
|
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Nhấn nút để tiếp tục") // Click to continue
|
||||||
|
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Xin chờ...")
|
||||||
|
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Chèn và nhấn") // Insert and Click
|
||||||
|
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Nhấn để sưởi") // Click to heat
|
||||||
|
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Đang sưởi nóng") // Heating
|
||||||
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Đang dỡ ra...") // Ejecting
|
||||||
|
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Đang nạp...") // Loading
|
||||||
|
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Đang xả...") // Purging
|
||||||
|
#define MSG_FILAMENT_CHANGE_CONT_PURGE_1 _UxGT("Nhấn nút để kết thúc") // Click to finish
|
||||||
|
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Đang tiếp tục...") // Resuming
|
||||||
|
#endif // LCD_HEIGHT < 4
|
||||||
|
|
||||||
|
#define MSG_TMC_DRIVERS _UxGT("Trình điều khiển TMC") // TMC drivers
|
||||||
|
#define MSG_TMC_CURRENT _UxGT("Dòng điện trình điều khiển") // Driver current
|
||||||
|
#define MSG_TMC_HYBRID_THRS _UxGT("Ngưỡng Hỗn Hợp") // Hybrid threshold
|
||||||
|
#define MSG_TMC_HOMING_THRS _UxGT("Vô cảm biến") // Sensorless homing
|
||||||
|
#define MSG_TMC_STEPPING_MODE _UxGT("Chế độ từng bước") // Stepping mode
|
||||||
|
#define MSG_TMC_STEALTH_ENABLED _UxGT("CắtTàngHình được kích hoạt") // StealthChop enabled
|
||||||
File diff suppressed because it is too large
Load Diff
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue