microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311)

Browse Source
2.0.x
Scott Lahteine 6 years ago committed by GitHub
parent 4771e372a1
commit cfdb38eda4
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
30 changed files with 478 additions and 615 deletions
Show Stats Download Patch File Download Diff File

3
Marlin/src/Marlin.cpp
Unescape Escape View File

@ -910,8 +910,7 @@ void setup() {
#endif
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(MSG_FREE_MEMORY, freeMemory());
SERIAL_ECHOLNPAIR(MSG_PLANNER_BUFFER_BYTES, (int)sizeof(block_t)*BLOCK_BUFFER_SIZE);
SERIAL_ECHOLNPAIR(MSG_FREE_MEMORY, freeMemory(), MSG_PLANNER_BUFFER_BYTES, (int)sizeof(block_t) * (BLOCK_BUFFER_SIZE));
queue_setup();

20
Marlin/src/core/minmax.h
Unescape Escape View File

@ -23,6 +23,10 @@
#undef MIN
#undef MAX
// Pass NUM_ARGS(__VA_ARGS__) to use the number of arguments
#define _NUM_ARGS(_0,_24_,_23,_22,_21,_20,_19,_18,_17,_16,_15,_14,_13,_12,_11,_10,_9,_8,_7,_6,_5,_4,_3,_2,_1,N,...) N
#define NUM_ARGS(...) _NUM_ARGS(0, __VA_ARGS__ ,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,4,3,2,1,0)
#ifdef __cplusplus
#ifndef _MINMAX_H_
@ -46,24 +50,28 @@
#else
// NUM_ARGS(...) evaluates to the number of arguments
#define _NUM_ARGS(X,X6,X5,X4,X3,X2,X1,N,...) N
#define NUM_ARGS(...) _NUM_ARGS(0, __VA_ARGS__ ,6,5,4,3,2,1,0)
#define MIN_2(a,b) ({__typeof__(a) _a = (a); __typeof__(b) _b = (b); _a < _b ? _a : _b;})
#define MIN_2(a,b) ((a)<(b)?(a):(b))
#define MIN_3(a,...) MIN_2(a,MIN_2(__VA_ARGS__))
#define MIN_4(a,...) MIN_2(a,MIN_3(__VA_ARGS__))
#define MIN_5(a,...) MIN_2(a,MIN_4(__VA_ARGS__))
#define MIN_6(a,...) MIN_2(a,MIN_5(__VA_ARGS__))
#define MIN_7(a,...) MIN_2(a,MIN_6(__VA_ARGS__))
#define MIN_8(a,...) MIN_2(a,MIN_7(__VA_ARGS__))
#define MIN_9(a,...) MIN_2(a,MIN_8(__VA_ARGS__))
#define MIN_10(a,...) MIN_2(a,MIN_9(__VA_ARGS__))
#define __MIN_N(N, ...) MIN_##N(__VA_ARGS__)
#define _MIN_N(N, ...) __MIN_N(N,__VA_ARGS__)
#define MIN(...) _MIN_N(NUM_ARGS(__VA_ARGS__), __VA_ARGS__)
#define MAX_2(a,b) ({__typeof__(a) _a = (a); __typeof__(b) _b = (b); _a > _b ? _a : _b;})
#define MAX_2(a,b) ((a)>(b)?(a):(b))
#define MAX_3(a,...) MAX_2(a,MAX_2(__VA_ARGS__))
#define MAX_4(a,...) MAX_2(a,MAX_3(__VA_ARGS__))
#define MAX_5(a,...) MAX_2(a,MAX_4(__VA_ARGS__))
#define MAX_6(a,...) MAX_2(a,MAX_5(__VA_ARGS__))
#define MAX_7(a,...) MAX_2(a,MAX_6(__VA_ARGS__))
#define MAX_8(a,...) MAX_2(a,MAX_7(__VA_ARGS__))
#define MAX_9(a,...) MAX_2(a,MAX_8(__VA_ARGS__))
#define MAX_10(a,...) MAX_2(a,MAX_9(__VA_ARGS__))
#define __MAX_N(N, ...) MAX_##N(__VA_ARGS__)
#define _MAX_N(N, ...) __MAX_N(N,__VA_ARGS__)
#define MAX(...) _MAX_N(NUM_ARGS(__VA_ARGS__), __VA_ARGS__)

3
Marlin/src/core/serial.cpp
Unescape Escape View File

@ -69,8 +69,7 @@ void print_bin(const uint16_t val) {
serialprintPGM(prefix);
SERIAL_CHAR('(');
SERIAL_ECHO(x);
SERIAL_ECHOPAIR(", ", y);
SERIAL_ECHOPAIR(", ", z);
SERIAL_ECHOPAIR(", ", y, ", ", z);
SERIAL_CHAR(')');
if (suffix) serialprintPGM(suffix); else SERIAL_EOL();
}

77
Marlin/src/core/serial.h
Unescape Escape View File

@ -22,6 +22,7 @@
#pragma once
#include "../inc/MarlinConfigPre.h"
#include "../core/minmax.h"
#include HAL_PATH(../HAL, HAL.h)
/**
@ -62,7 +63,7 @@ extern uint8_t marlin_debug_flags;
#define SERIAL_CHAR(x) SERIAL_OUT(write, x)
#define SERIAL_ECHO(x) SERIAL_OUT(print, x)
#define SERIAL_ECHO_F(x,y) SERIAL_OUT(print, x, y)
#define SERIAL_ECHO_F(...) SERIAL_OUT(print, __VA_ARGS__)
#define SERIAL_ECHOLN(x) SERIAL_OUT(println, x)
#define SERIAL_PRINT(x,b) SERIAL_OUT(print, x, b)
#define SERIAL_PRINTLN(x,b) SERIAL_OUT(println, x, b)
@ -75,20 +76,76 @@ extern uint8_t marlin_debug_flags;
#define SERIAL_FLUSHTX()
#endif
#define SERIAL_ECHOPGM(x) (serialprintPGM(PSTR(x)))
#define SERIAL_ECHOLNPGM(x) (serialprintPGM(PSTR(x "\n")))
#define SERIAL_ECHOPAIR(pre, value) (serial_echopair_PGM(PSTR(pre), value))
#define SERIAL_ECHOLNPAIR(pre, value) do{ SERIAL_ECHOPAIR(pre, value); SERIAL_EOL(); }while(0)
#define SERIAL_ECHOPAIR_F(pre, value, y) do{ SERIAL_ECHO(pre); SERIAL_ECHO_F(value, y); }while(0)
#define SERIAL_ECHOLNPAIR_F(pre, value, y) do{ SERIAL_ECHOPAIR_F(pre, value, y); SERIAL_EOL(); }while(0)
// Print up to 12 pairs of values
#define __SEP_N(N,...) _SEP_##N(__VA_ARGS__)
#define _SEP_N(N,...) __SEP_N(N,__VA_ARGS__)
#define _SEP_2(PRE,V) serial_echopair_PGM(PSTR(PRE),V)
#define _SEP_3(a,b,ETC) do{ _SEP_2(a,b); SERIAL_ECHOPGM(ETC); }while(0)
#define _SEP_4(a,b,...) do{ _SEP_2(a,b); _SEP_2(__VA_ARGS__); }while(0)
#define _SEP_5(a,b,...) do{ _SEP_2(a,b); _SEP_3(__VA_ARGS__); }while(0)
#define _SEP_6(a,b,...) do{ _SEP_2(a,b); _SEP_4(__VA_ARGS__); }while(0)
#define _SEP_7(a,b,...) do{ _SEP_2(a,b); _SEP_5(__VA_ARGS__); }while(0)
#define _SEP_8(a,b,...) do{ _SEP_2(a,b); _SEP_6(__VA_ARGS__); }while(0)
#define _SEP_9(a,b,...) do{ _SEP_2(a,b); _SEP_7(__VA_ARGS__); }while(0)
#define _SEP_10(a,b,...) do{ _SEP_2(a,b); _SEP_8(__VA_ARGS__); }while(0)
#define _SEP_11(a,b,...) do{ _SEP_2(a,b); _SEP_9(__VA_ARGS__); }while(0)
#define _SEP_12(a,b,...) do{ _SEP_2(a,b); _SEP_10(__VA_ARGS__); }while(0)
#define _SEP_13(a,b,...) do{ _SEP_2(a,b); _SEP_11(__VA_ARGS__); }while(0)
#define _SEP_14(a,b,...) do{ _SEP_2(a,b); _SEP_12(__VA_ARGS__); }while(0)
#define _SEP_15(a,b,...) do{ _SEP_2(a,b); _SEP_13(__VA_ARGS__); }while(0)
#define _SEP_16(a,b,...) do{ _SEP_2(a,b); _SEP_14(__VA_ARGS__); }while(0)
#define _SEP_17(a,b,...) do{ _SEP_2(a,b); _SEP_15(__VA_ARGS__); }while(0)
#define _SEP_18(a,b,...) do{ _SEP_2(a,b); _SEP_16(__VA_ARGS__); }while(0)
#define _SEP_19(a,b,...) do{ _SEP_2(a,b); _SEP_17(__VA_ARGS__); }while(0)
#define _SEP_20(a,b,...) do{ _SEP_2(a,b); _SEP_18(__VA_ARGS__); }while(0)
#define _SEP_21(a,b,...) do{ _SEP_2(a,b); _SEP_19(__VA_ARGS__); }while(0)
#define _SEP_22(a,b,...) do{ _SEP_2(a,b); _SEP_20(__VA_ARGS__); }while(0)
#define _SEP_23(a,b,...) do{ _SEP_2(a,b); _SEP_21(__VA_ARGS__); }while(0)
#define _SEP_24(a,b,...) do{ _SEP_2(a,b); _SEP_22(__VA_ARGS__); }while(0)
#define SERIAL_ECHOPAIR(...) _SEP_N(NUM_ARGS(__VA_ARGS__),__VA_ARGS__)
// Print up to 12 pairs of values followed by newline
#define __SELP_N(N,...) _SELP_##N(__VA_ARGS__)
#define _SELP_N(N,...) __SELP_N(N,__VA_ARGS__)
#define _SELP_2(PRE,V) do{ serial_echopair_PGM(PSTR(PRE),V); SERIAL_EOL(); }while(0)
#define _SELP_3(PRE,V,ETC) do{ serial_echopair_PGM(PSTR(PRE),V); SERIAL_ECHOLNPGM(ETC); }while(0)
#define _SELP_4(a,b,...) do{ _SELP_2(a,b); _SELP_2(__VA_ARGS__); }while(0)
#define _SELP_5(a,b,...) do{ _SELP_2(a,b); _SELP_3(__VA_ARGS__); }while(0)
#define _SELP_6(a,b,...) do{ _SELP_2(a,b); _SELP_4(__VA_ARGS__); }while(0)
#define _SELP_7(a,b,...) do{ _SELP_2(a,b); _SELP_5(__VA_ARGS__); }while(0)
#define _SELP_8(a,b,...) do{ _SELP_2(a,b); _SELP_6(__VA_ARGS__); }while(0)
#define _SELP_9(a,b,...) do{ _SELP_2(a,b); _SELP_7(__VA_ARGS__); }while(0)
#define _SELP_10(a,b,...) do{ _SELP_2(a,b); _SELP_8(__VA_ARGS__); }while(0)
#define _SELP_11(a,b,...) do{ _SELP_2(a,b); _SELP_9(__VA_ARGS__); }while(0)
#define _SELP_12(a,b,...) do{ _SELP_2(a,b); _SELP_10(__VA_ARGS__); }while(0)
#define _SELP_13(a,b,...) do{ _SELP_2(a,b); _SELP_11(__VA_ARGS__); }while(0)
#define _SELP_14(a,b,...) do{ _SELP_2(a,b); _SELP_12(__VA_ARGS__); }while(0)
#define _SELP_15(a,b,...) do{ _SELP_2(a,b); _SELP_13(__VA_ARGS__); }while(0)
#define _SELP_16(a,b,...) do{ _SELP_2(a,b); _SELP_14(__VA_ARGS__); }while(0)
#define _SELP_17(a,b,...) do{ _SELP_2(a,b); _SELP_15(__VA_ARGS__); }while(0)
#define _SELP_18(a,b,...) do{ _SELP_2(a,b); _SELP_16(__VA_ARGS__); }while(0)
#define _SELP_19(a,b,...) do{ _SELP_2(a,b); _SELP_17(__VA_ARGS__); }while(0)
#define _SELP_20(a,b,...) do{ _SELP_2(a,b); _SELP_18(__VA_ARGS__); }while(0)
#define _SELP_21(a,b,...) do{ _SELP_2(a,b); _SELP_19(__VA_ARGS__); }while(0)
#define _SELP_22(a,b,...) do{ _SELP_2(a,b); _SELP_20(__VA_ARGS__); }while(0)
#define _SELP_23(a,b,...) do{ _SELP_2(a,b); _SELP_21(__VA_ARGS__); }while(0)
#define _SELP_24(a,b,...) do{ _SELP_2(a,b); _SELP_22(__VA_ARGS__); }while(0)
#define SERIAL_ECHOLNPAIR(...) _SELP_N(NUM_ARGS(__VA_ARGS__),__VA_ARGS__)
#define SERIAL_ECHOPGM(S) (serialprintPGM(PSTR(S)))
#define SERIAL_ECHOLNPGM(S) (serialprintPGM(PSTR(S "\n")))
#define SERIAL_ECHOPAIR_F(pre, ...) do{ SERIAL_ECHO(pre); SERIAL_ECHO_F(__VA_ARGS__); }while(0)
#define SERIAL_ECHOLNPAIR_F(...) do{ SERIAL_ECHOPAIR_F(__VA_ARGS__); SERIAL_EOL(); }while(0)
#define SERIAL_ECHO_START() serial_echo_start()
#define SERIAL_ERROR_START() serial_error_start()
#define SERIAL_EOL() SERIAL_CHAR('\n')
#define SERIAL_ECHO_MSG(STR) do{ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(STR); }while(0)
#define SERIAL_ERROR_MSG(STR) do{ SERIAL_ERROR_START(); SERIAL_ECHOLNPGM(STR); }while(0)
#define SERIAL_ECHO_MSG(S) do{ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(S); }while(0)
#define SERIAL_ERROR_MSG(S) do{ SERIAL_ERROR_START(); SERIAL_ECHOLNPGM(S); }while(0)
#define SERIAL_ECHO_SP(C) serial_spaces(C)

58
Marlin/src/feature/I2CPositionEncoder.cpp
Unescape Escape View File

@ -47,8 +47,7 @@ void I2CPositionEncoder::init(const uint8_t address, const AxisEnum axis) {
initialized++;
SERIAL_ECHOPAIR("Setting up encoder on ", axis_codes[encoderAxis]);
SERIAL_ECHOLNPAIR(" axis, addr = ", address);
SERIAL_ECHOLNPAIR("Setting up encoder on ", axis_codes[encoderAxis], " axis, addr = ", address);
position = get_position();
}
@ -66,8 +65,7 @@ void I2CPositionEncoder::update() {
/*
if (trusted) { //commented out as part of the note below
trusted = false;
SERIAL_ECHOPAIR("Fault detected on ", axis_codes[encoderAxis]);
SERIAL_ECHOLNPGM(" axis encoder. Disengaging error correction until module is trusted again.");
SERIAL_ECHOLMPAIR("Fault detected on ", axis_codes[encoderAxis], " axis encoder. Disengaging error correction until module is trusted again.");
}
*/
return;
@ -92,8 +90,7 @@ void I2CPositionEncoder::update() {
if (millis() - lastErrorTime > I2CPE_TIME_TRUSTED) {
trusted = true;
SERIAL_ECHOPAIR("Untrusted encoder module on ", axis_codes[encoderAxis]);
SERIAL_ECHOLNPGM(" axis has been fault-free for set duration, reinstating error correction.");
SERIAL_ECHOLNPAIR("Untrusted encoder module on ", axis_codes[encoderAxis], " axis has been fault-free for set duration, reinstating error correction.");
//the encoder likely lost its place when the error occured, so we'll reset and use the printer's
//idea of where it the axis is to re-initialize
@ -172,8 +169,7 @@ void I2CPositionEncoder::update() {
LOOP_L_N(i, I2CPE_ERR_PRST_ARRAY_SIZE) sumP += errPrst[i];
const int32_t errorP = int32_t(sumP * (1.0f / (I2CPE_ERR_PRST_ARRAY_SIZE)));
SERIAL_ECHO(axis_codes[encoderAxis]);
SERIAL_ECHOPAIR(" - err detected: ", errorP * planner.steps_to_mm[encoderAxis]);
SERIAL_ECHOLNPGM("mm; correcting!");
SERIAL_ECHOLNPAIR(" - err detected: ", errorP * planner.steps_to_mm[encoderAxis], "mm; correcting!");
thermalManager.babystepsTodo[encoderAxis] = -LROUND(errorP);
errPrstIdx = 0;
}
@ -192,9 +188,7 @@ void I2CPositionEncoder::update() {
if (ABS(error) > I2CPE_ERR_CNT_THRESH * planner.settings.axis_steps_per_mm[encoderAxis]) {
const millis_t ms = millis();
if (ELAPSED(ms, nextErrorCountTime)) {
SERIAL_ECHOPAIR("Large error on ", axis_codes[encoderAxis]);
SERIAL_ECHOPAIR(" axis. error: ", (int)error);
SERIAL_ECHOLNPAIR("; diffSum: ", diffSum);
SERIAL_ECHOLNPAIR("Large error on ", axis_codes[encoderAxis], " axis. error: ", (int)error, "; diffSum: ", diffSum);
errorCount++;
nextErrorCountTime = ms + I2CPE_ERR_CNT_DEBOUNCE_MS;
}
@ -215,8 +209,7 @@ void I2CPositionEncoder::set_homed() {
#ifdef I2CPE_DEBUG
SERIAL_ECHO(axis_codes[encoderAxis]);
SERIAL_ECHOPAIR(" axis encoder homed, offset of ", zeroOffset);
SERIAL_ECHOLNPGM(" ticks.");
SERIAL_ECHOLNPAIR(" axis encoder homed, offset of ", zeroOffset, " ticks.");
#endif
}
}
@ -261,9 +254,7 @@ float I2CPositionEncoder::get_axis_error_mm(const bool report) {
if (report) {
SERIAL_ECHO(axis_codes[encoderAxis]);
SERIAL_ECHOPAIR(" axis target: ", target);
SERIAL_ECHOPAIR(", actual: ", actual);
SERIAL_ECHOLNPAIR(", error : ",error);
SERIAL_ECHOLNPAIR(" axis target: ", target, ", actual: ", actual, ", error : ",error);
}
return error;
@ -296,10 +287,7 @@ int32_t I2CPositionEncoder::get_axis_error_steps(const bool report) {
if (report) {
SERIAL_ECHO(axis_codes[encoderAxis]);
SERIAL_ECHOPAIR(" axis target: ", target);
SERIAL_ECHOPAIR(", actual: ", encoderCountInStepperTicksScaled);
SERIAL_ECHOLNPAIR(", error : ", error);
SERIAL_ECHOLNPAIR(" axis target: ", target, ", actual: ", encoderCountInStepperTicksScaled, ", error : ", error);
if (suppressOutput) SERIAL_ECHOLNPGM("Discontinuity detected, suppressing error.");
}
@ -436,11 +424,9 @@ void I2CPositionEncoder::calibrate_steps_mm(const uint8_t iter) {
travelledDistance = mm_from_count(ABS(stopCount - startCount));
SERIAL_ECHOPAIR("Attempted travel: ", travelDistance);
SERIAL_ECHOLNPGM("mm");
SERIAL_ECHOLNPAIR("Attempted travel: ", travelDistance, "mm");
SERIAL_ECHOPAIR(" Actual travel: ", travelledDistance);
SERIAL_ECHOLNPGM("mm");
SERIAL_ECHOLNPAIR(" Actual travel: ", travelledDistance, "mm");
//Calculate new axis steps per unit
old_steps_mm = planner.settings.axis_steps_per_mm[encoderAxis];
@ -705,21 +691,18 @@ void I2CPositionEncodersMgr::change_module_address(const uint8_t oldaddr, const
// First check 'new' address is not in use
Wire.beginTransmission(I2C_ADDRESS(newaddr));
if (!Wire.endTransmission()) {
SERIAL_ECHOPAIR("?There is already a device with that address on the I2C bus! (", newaddr);
SERIAL_ECHOLNPGM(")");
SERIAL_ECHOLNPAIR("?There is already a device with that address on the I2C bus! (", newaddr, ")");
return;
}
// Now check that we can find the module on the oldaddr address
Wire.beginTransmission(I2C_ADDRESS(oldaddr));
if (Wire.endTransmission()) {
SERIAL_ECHOPAIR("?No module detected at this address! (", oldaddr);
SERIAL_ECHOLNPGM(")");
SERIAL_ECHOLNPAIR("?No module detected at this address! (", oldaddr, ")");
return;
}
SERIAL_ECHOPAIR("Module found at ", oldaddr);
SERIAL_ECHOLNPAIR(", changing address to ", newaddr);
SERIAL_ECHOLNPAIR("Module found at ", oldaddr, ", changing address to ", newaddr);
// Change the modules address
Wire.beginTransmission(I2C_ADDRESS(oldaddr));
@ -755,13 +738,11 @@ void I2CPositionEncodersMgr::report_module_firmware(const uint8_t address) {
// First check there is a module
Wire.beginTransmission(I2C_ADDRESS(address));
if (Wire.endTransmission()) {
SERIAL_ECHOPAIR("?No module detected at this address! (", address);
SERIAL_ECHOLNPGM(")");
SERIAL_ECHOLNPAIR("?No module detected at this address! (", address, ")");
return;
}
SERIAL_ECHOPAIR("Requesting version info from module at address ", address);
SERIAL_ECHOLNPGM(":");
SERIAL_ECHOLNPAIR("Requesting version info from module at address ", address, ":");
Wire.beginTransmission(I2C_ADDRESS(address));
Wire.write(I2CPE_SET_REPORT_MODE);
@ -808,15 +789,13 @@ int8_t I2CPositionEncodersMgr::parse() {
else if (parser.seenval('I')) {
if (!parser.has_value()) {
SERIAL_ECHOLNPAIR("?I seen, but no index specified! [0-", I2CPE_ENCODER_CNT - 1);
SERIAL_ECHOLNPGM("]");
SERIAL_ECHOLNPAIR("?I seen, but no index specified! [0-", I2CPE_ENCODER_CNT - 1, "]");
return I2CPE_PARSE_ERR;
};
I2CPE_idx = parser.value_byte();
if (I2CPE_idx >= I2CPE_ENCODER_CNT) {
SERIAL_ECHOLNPAIR("?Index out of range. [0-", I2CPE_ENCODER_CNT - 1);
SERIAL_ECHOLNPGM("]");
SERIAL_ECHOLNPAIR("?Index out of range. [0-", I2CPE_ENCODER_CNT - 1, "]");
return I2CPE_PARSE_ERR;
}
@ -995,8 +974,7 @@ void I2CPositionEncodersMgr::M864() {
else return;
}
SERIAL_ECHOPAIR("Changing module at address ", I2CPE_addr);
SERIAL_ECHOLNPAIR(" to address ", newAddress);
SERIAL_ECHOLNPAIR("Changing module at address ", I2CPE_addr, " to address ", newAddress);
change_module_address(I2CPE_addr, newAddress);
}

20
Marlin/src/feature/I2CPositionEncoder.h
Unescape Escape View File

@ -238,8 +238,7 @@ class I2CPositionEncodersMgr {
static void report_status(const int8_t idx) {
CHECK_IDX();
SERIAL_ECHOPAIR("Encoder ", idx);
SERIAL_ECHOPGM(": ");
SERIAL_ECHOLNPAIR("Encoder ", idx, ": ");
encoders[idx].get_raw_count();
encoders[idx].passes_test(true);
}
@ -264,22 +263,19 @@ class I2CPositionEncodersMgr {
static void report_error_count(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
SERIAL_ECHOPAIR("Error count on ", axis_codes[axis]);
SERIAL_ECHOLNPAIR(" axis is ", encoders[idx].get_error_count());
SERIAL_ECHOLNPAIR("Error count on ", axis_codes[axis], " axis is ", encoders[idx].get_error_count());
}
static void reset_error_count(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_error_count(0);
SERIAL_ECHOPAIR("Error count on ", axis_codes[axis]);
SERIAL_ECHOLNPGM(" axis has been reset.");
SERIAL_ECHOLNPAIR("Error count on ", axis_codes[axis], " axis has been reset.");
}
static void enable_ec(const int8_t idx, const bool enabled, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_ec_enabled(enabled);
SERIAL_ECHOPAIR("Error correction on ", axis_codes[axis]);
SERIAL_ECHOPGM(" axis is ");
SERIAL_ECHOPAIR("Error correction on ", axis_codes[axis], " axis is ");
serialprintPGM(encoders[idx].get_ec_enabled() ? PSTR("en") : PSTR("dis"));
SERIAL_ECHOLNPGM("abled.");
}
@ -287,17 +283,13 @@ class I2CPositionEncodersMgr {
static void set_ec_threshold(const int8_t idx, const float newThreshold, const AxisEnum axis) {
CHECK_IDX();
encoders[idx].set_ec_threshold(newThreshold);
SERIAL_ECHOPAIR("Error correct threshold for ", axis_codes[axis]);
SERIAL_ECHOPAIR(" axis set to ", FIXFLOAT(newThreshold));
SERIAL_ECHOLNPGM("mm.");
SERIAL_ECHOLNPAIR("Error correct threshold for ", axis_codes[axis], " axis set to ", FIXFLOAT(newThreshold), "mm.");
}
static void get_ec_threshold(const int8_t idx, const AxisEnum axis) {
CHECK_IDX();
const float threshold = encoders[idx].get_ec_threshold();
SERIAL_ECHOPAIR("Error correct threshold for ", axis_codes[axis]);
SERIAL_ECHOPAIR(" axis is ", FIXFLOAT(threshold));
SERIAL_ECHOLNPGM("mm.");
SERIAL_ECHOLNPAIR("Error correct threshold for ", axis_codes[axis], " axis is ", FIXFLOAT(threshold), "mm.");
}
static int8_t idx_from_axis(const AxisEnum axis) {

21
Marlin/src/feature/bedlevel/abl/abl.cpp
Unescape Escape View File

@ -338,22 +338,11 @@ float bilinear_z_offset(const float raw[XYZ]) {
/*
static float last_offset = 0;
if (ABS(last_offset - offset) > 0.2) {
SERIAL_ECHOPGM("Sudden Shift at ");
SERIAL_ECHOPAIR("x=", rx);
SERIAL_ECHOPAIR(" / ", bilinear_grid_spacing[X_AXIS]);
SERIAL_ECHOLNPAIR(" -> gridx=", gridx);
SERIAL_ECHOPAIR(" y=", ry);
SERIAL_ECHOPAIR(" / ", bilinear_grid_spacing[Y_AXIS]);
SERIAL_ECHOLNPAIR(" -> gridy=", gridy);
SERIAL_ECHOPAIR(" ratio_x=", ratio_x);
SERIAL_ECHOLNPAIR(" ratio_y=", ratio_y);
SERIAL_ECHOPAIR(" z1=", z1);
SERIAL_ECHOPAIR(" z2=", z2);
SERIAL_ECHOPAIR(" z3=", z3);
SERIAL_ECHOLNPAIR(" z4=", z4);
SERIAL_ECHOPAIR(" L=", L);
SERIAL_ECHOPAIR(" R=", R);
SERIAL_ECHOLNPAIR(" offset=", offset);
SERIAL_ECHOLNPAIR("Sudden Shift at x=", rx, " / ", bilinear_grid_spacing[X_AXIS], " -> gridx=", gridx);
SERIAL_ECHOLNPAIR(" y=", ry, " / ", bilinear_grid_spacing[Y_AXIS], " -> gridy=", gridy);
SERIAL_ECHOLNPAIR(" ratio_x=", ratio_x, " ratio_y=", ratio_y);
SERIAL_ECHOLNPAIR(" z1=", z1, " z2=", z2, " z3=", z3, " z4=", z4);
SERIAL_ECHOLNPAIR(" L=", L, " R=", R, " offset=", offset);
}
last_offset = offset;
//*/

3
Marlin/src/feature/bedlevel/ubl/ubl.cpp
Unescape Escape View File

@ -45,8 +45,7 @@
for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++)
if (!isnan(z_values[x][y])) {
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" M421 I", x);
SERIAL_ECHOPAIR(" J", y);
SERIAL_ECHOPAIR(" M421 I", x, " J", y);
SERIAL_ECHOPAIR_F(" Z", z_values[x][y], 2);
SERIAL_EOL();
serial_delay(75); // Prevent Printrun from exploding

12
Marlin/src/feature/bedlevel/ubl/ubl.h
Unescape Escape View File

@ -202,11 +202,7 @@ class unified_bed_leveling {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
serialprintPGM( !WITHIN(x1_i, 0, GRID_MAX_POINTS_X - 1) ? PSTR("x1_i") : PSTR("yi") );
SERIAL_ECHOPAIR(" out of bounds in z_correction_for_x_on_horizontal_mesh_line(rx0=", rx0);
SERIAL_ECHOPAIR(",x1_i=", x1_i);
SERIAL_ECHOPAIR(",yi=", yi);
SERIAL_CHAR(')');
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" out of bounds in z_correction_for_x_on_horizontal_mesh_line(rx0=", rx0, ",x1_i=", x1_i, ",yi=", yi, ")");
}
#endif
@ -236,11 +232,7 @@ class unified_bed_leveling {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
serialprintPGM(!WITHIN(xi, 0, GRID_MAX_POINTS_X - 1) ? PSTR("xi") : PSTR("y1_i"));
SERIAL_ECHOPAIR(" out of bounds in z_correction_for_y_on_vertical_mesh_line(ry0=", ry0);
SERIAL_ECHOPAIR(", xi=", xi);
SERIAL_ECHOPAIR(", y1_i=", y1_i);
SERIAL_CHAR(')');
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" out of bounds in z_correction_for_y_on_vertical_mesh_line(ry0=", ry0, ", xi=", xi, ", y1_i=", y1_i, ")");
}
#endif

33
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
Unescape Escape View File

@ -598,8 +598,7 @@
}
if (!WITHIN(g29_storage_slot, 0, a - 1)) {
SERIAL_ECHOLNPGM("?Invalid storage slot.");
SERIAL_ECHOLNPAIR("?Use 0 to ", a - 1);
SERIAL_ECHOLNPAIR("?Invalid storage slot.\n?Use 0 to ", a - 1);
return;
}
@ -627,8 +626,7 @@
}
if (!WITHIN(g29_storage_slot, 0, a - 1)) {
SERIAL_ECHOLNPGM("?Invalid storage slot.");
SERIAL_ECHOLNPAIR("?Use 0 to ", a - 1);
SERIAL_ECHOLNPAIR("?Invalid storage slot.\n?Use 0 to ", a - 1);
goto LEAVE;
}
@ -1640,10 +1638,8 @@
if (storage_slot == -1)
SERIAL_ECHOPGM("No Mesh Loaded.");
else {
SERIAL_ECHOPAIR("Mesh ", storage_slot);
SERIAL_ECHOPGM(" Loaded.");
}
else
SERIAL_ECHOPAIR("Mesh ", storage_slot, " Loaded.");
SERIAL_EOL();
serial_delay(50);
@ -1683,19 +1679,16 @@
SERIAL_EOL();
#if HAS_KILL
SERIAL_ECHOPAIR("Kill pin on :", KILL_PIN);
SERIAL_ECHOLNPAIR(" state:", READ(KILL_PIN));
SERIAL_ECHOLNPAIR("Kill pin on :", int(KILL_PIN), " state:", READ(KILL_PIN));
#endif
SERIAL_EOL();
serial_delay(50);
#if ENABLED(UBL_DEVEL_DEBUGGING)
SERIAL_ECHOLNPAIR("ubl_state_at_invocation :", ubl_state_at_invocation); SERIAL_EOL();
SERIAL_ECHOLNPAIR("ubl_state_recursion_chk :", ubl_state_recursion_chk); SERIAL_EOL();
SERIAL_ECHOLNPAIR("ubl_state_at_invocation :", ubl_state_at_invocation, "\nubl_state_recursion_chk :", ubl_state_recursion_chk);
serial_delay(50);
SERIAL_ECHOPAIR("Meshes go from ", hex_address((void*)settings.meshes_start_index()));
SERIAL_ECHOLNPAIR(" to ", hex_address((void*)settings.meshes_end_index()));
SERIAL_ECHOLNPAIR("Meshes go from ", hex_address((void*)settings.meshes_start_index()), " to ", hex_address((void*)settings.meshes_end_index()));
serial_delay(50);
SERIAL_ECHOLNPAIR("sizeof(ubl) : ", (int)sizeof(ubl)); SERIAL_EOL();
@ -1705,8 +1698,7 @@
SERIAL_ECHOLNPAIR("EEPROM free for UBL: ", hex_address((void*)(settings.meshes_end_index() - settings.meshes_start_index())));
serial_delay(50);
SERIAL_ECHOPAIR("EEPROM can hold ", settings.calc_num_meshes());
SERIAL_ECHOLNPGM(" meshes.\n");
SERIAL_ECHOLNPAIR("EEPROM can hold ", settings.calc_num_meshes(), " meshes.\n");
serial_delay(25);
#endif // UBL_DEVEL_DEBUGGING
@ -1753,24 +1745,21 @@
}
if (!parser.has_value()) {
SERIAL_ECHOLNPGM("?Storage slot # required.");
SERIAL_ECHOLNPAIR("?Use 0 to ", a - 1);
SERIAL_ECHOLNPAIR("?Storage slot # required.\n?Use 0 to ", a - 1);
return;
}
g29_storage_slot = parser.value_int();
if (!WITHIN(g29_storage_slot, 0, a - 1)) {
SERIAL_ECHOLNPGM("?Invalid storage slot.");
SERIAL_ECHOLNPAIR("?Use 0 to ", a - 1);
SERIAL_ECHOLNPAIR("?Invalid storage slot.\n?Use 0 to ", a - 1);
return;
}
float tmp_z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
settings.load_mesh(g29_storage_slot, &tmp_z_values);
SERIAL_ECHOPAIR("Subtracting mesh in slot ", g29_storage_slot);
SERIAL_ECHOLNPGM(" from current mesh.");
SERIAL_ECHOLNPAIR("Subtracting mesh in slot ", g29_storage_slot, " from current mesh.");
for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++)
for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++)

13
Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp
Unescape Escape View File

@ -65,12 +65,13 @@
cell_dest_yi = get_cell_index_y(end[Y_AXIS]);
if (g26_debug_flag) {
SERIAL_ECHOPAIR(" ubl.line_to_destination_cartesian(xe=", destination[X_AXIS]);
SERIAL_ECHOPAIR(", ye=", destination[Y_AXIS]);
SERIAL_ECHOPAIR(", ze=", destination[Z_AXIS]);
SERIAL_ECHOPAIR(", ee=", destination[E_AXIS]);
SERIAL_CHAR(')');
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" ubl.line_to_destination_cartesian(xe=", destination[X_AXIS],
", ye=", destination[Y_AXIS],
", ze=", destination[Z_AXIS],
", ee=", destination[E_AXIS],
")"
);
debug_current_and_destination(PSTR("Start of ubl.line_to_destination_cartesian()"));
}

15
Marlin/src/feature/dac/stepper_dac.cpp
Unescape Escape View File

@ -105,15 +105,12 @@ void dac_print_values() {
SERIAL_ECHO_MSG("Stepper current values in % (Amps):");
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" X:", dac_perc(X_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(X_AXIS));
SERIAL_ECHOPAIR(") Y:", dac_perc(Y_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(Y_AXIS));
SERIAL_ECHOPAIR(") Z:", dac_perc(Z_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(Z_AXIS));
SERIAL_ECHOPAIR(") E:", dac_perc(E_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(E_AXIS));
SERIAL_ECHOLNPGM(")");
SERIAL_ECHOLNPAIR(
" X:", dac_perc(X_AXIS), " (", dac_amps(X_AXIS), ")"
" Y:", dac_perc(Y_AXIS), " (", dac_amps(Y_AXIS), ")"
" Z:", dac_perc(Z_AXIS), " (", dac_amps(Z_AXIS), ")"
" E:", dac_perc(E_AXIS), " (", dac_amps(E_AXIS), ")"
);
}
void dac_commit_eeprom() {

20
Marlin/src/feature/fwretract.cpp
Unescape Escape View File

@ -112,15 +112,15 @@ void FWRetract::retract(const bool retracting
#endif
/* // debugging
SERIAL_ECHOLNPAIR("retracting ", retracting);
SERIAL_ECHOLNPAIR("swapping ", swapping);
SERIAL_ECHOLNPAIR("active extruder ", active_extruder);
SERIAL_ECHOLNPAIR(
"retracting ", retracting,
"swapping ", swapping
"active extruder ", active_extruder
);
for (uint8_t i = 0; i < EXTRUDERS; ++i) {
SERIAL_ECHOPAIR("retracted[", i);
SERIAL_ECHOLNPAIR("] ", retracted[i]);
SERIAL_ECHOLNPAIR("retracted[", i, "] ", retracted[i]);
#if EXTRUDERS > 1
SERIAL_ECHOPAIR("retracted_swap[", i);
SERIAL_ECHOLNPAIR("] ", retracted_swap[i]);
SERIAL_ECHOLNPAIR("retracted_swap[", i, "] ", retracted_swap[i]);
#endif
}
SERIAL_ECHOLNPAIR("current_position[z] ", current_position[Z_AXIS]);
@ -209,11 +209,9 @@ void FWRetract::retract(const bool retracting
SERIAL_ECHOLNPAIR("swapping ", swapping);
SERIAL_ECHOLNPAIR("active_extruder ", active_extruder);
for (uint8_t i = 0; i < EXTRUDERS; ++i) {
SERIAL_ECHOPAIR("retracted[", i);
SERIAL_ECHOLNPAIR("] ", retracted[i]);
SERIAL_ECHOLNPAIR("retracted[", i, "] ", retracted[i]);
#if EXTRUDERS > 1
SERIAL_ECHOPAIR("retracted_swap[", i);
SERIAL_ECHOLNPAIR("] ", retracted_swap[i]);
SERIAL_ECHOLNPAIR("retracted_swap[", i, "] ", retracted_swap[i]);
#endif
}
SERIAL_ECHOLNPAIR("current_position[z] ", current_position[Z_AXIS]);

12
Marlin/src/feature/mixing.cpp
Unescape Escape View File

@ -139,19 +139,11 @@ void Mixer::refresh_collector(const float proportion/*=1.0*/, const uint8_t t/*=
cmax = MAX(cmax, v);
csum += v;
}
//SERIAL_ECHOPAIR("Mixer::refresh_collector(", proportion);
//SERIAL_ECHOPAIR(", ", int(t));
//SERIAL_ECHOPAIR(") cmax=", cmax);
//SERIAL_ECHOPAIR(" csum=", csum);
//SERIAL_ECHOPGM(" color");
//SERIAL_ECHOPAIR("Mixer::refresh_collector(", proportion, ", ", int(t), ") cmax=", cmax, " csum=", csum, " color");
const float inv_prop = proportion / csum;
MIXER_STEPPER_LOOP(i) {
collector[i] = color[t][i] * inv_prop;
//SERIAL_ECHOPAIR(" [", int(t));
//SERIAL_ECHOPAIR("][", int(i));
//SERIAL_ECHOPAIR("] = ", int(color[t][i]));
//SERIAL_ECHOPAIR(" (", collector[i]);
//SERIAL_ECHOPGM(") ");
//SERIAL_ECHOPAIR(" [", int(t), "][", int(i), "] = ", int(color[t][i]), " (", collector[i], ") ");
}
//SERIAL_EOL();
}

19
Marlin/src/feature/mixing.h
Unescape Escape View File

@ -148,11 +148,7 @@ class Mixer {
MIXER_STEPPER_LOOP(i) tcolor[i] = mix[i] * scale;
#ifdef MIXER_NORMALIZER_DEBUG
SERIAL_ECHOPAIR("Mix [", int(mix[0]));
SERIAL_ECHOPAIR(", ", int(mix[1]));
SERIAL_ECHOPAIR("] to Color [", int(tcolor[0]));
SERIAL_ECHOPAIR(", ", int(tcolor[1]));
SERIAL_ECHOLNPGM("]");
SERIAL_ECHOLNPAIR("Mix [", int(mix[0]), ", ", int(mix[1]), "] to Color [", int(tcolor[0]), ", ", int(tcolor[1]), "]");
#endif
}
@ -163,12 +159,7 @@ class Mixer {
mix[0] = mixer_perc_t(100.0f * color[j][0] / ctot);
mix[1] = 100 - mix[0];
#ifdef MIXER_NORMALIZER_DEBUG
SERIAL_ECHOPAIR("V-tool ", int(j));
SERIAL_ECHOPAIR(" [", int(color[j][0]));
SERIAL_ECHOPAIR(", ", int(color[j][1]));
SERIAL_ECHOPAIR("] to Mix [", int(mix[0]));
SERIAL_ECHOPAIR(", ", int(mix[1]));
SERIAL_ECHOLNPGM("]");
SERIAL_ECHOLNPAIR("V-tool ", int(j), " [", int(color[j][0]), ", ", int(color[j][1]), "] to Mix [", int(mix[0]), ", ", int(mix[1]), "]");
#endif
}
@ -211,11 +202,7 @@ class Mixer {
mix[0] = (mixer_perc_t)CEIL(100.0f * gradient.color[0] / ctot);
mix[1] = 100 - mix[0];
#ifdef MIXER_NORMALIZER_DEBUG
SERIAL_ECHOPAIR("Gradient [", int(gradient.color[0]));
SERIAL_ECHOPAIR(", ", int(gradient.color[1]));
SERIAL_ECHOPAIR("] to Mix [", int(mix[0]));
SERIAL_ECHOPAIR(", ", int(mix[1]));
SERIAL_ECHOLNPGM("]");
SERIAL_ECHOLNPAIR("Gradient [", int(gradient.color[0]), ", ", int(gradient.color[1]), "] to Mix [", int(mix[0]), ", ", int(mix[1]), "]");
#endif
}

11
Marlin/src/feature/pause.cpp
Unescape Escape View File

@ -581,11 +581,12 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
*/
void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_length/*=0*/, const float &purge_length/*=ADVANCED_PAUSE_PURGE_LENGTH*/, const int8_t max_beep_count/*=0*/ DXC_ARGS) {
/*
SERIAL_ECHOLNPGM("start of resume_print()");
SERIAL_ECHOPAIR("\ndual_x_carriage_mode:", dual_x_carriage_mode);
SERIAL_ECHOPAIR("\nextruder_duplication_enabled:", extruder_duplication_enabled);
SERIAL_ECHOPAIR("\nactive_extruder:", active_extruder);
SERIAL_ECHOLNPGM("\n");
SERIAL_ECHOLNPAIR(
"start of resume_print()\ndual_x_carriage_mode:", dual_x_carriage_mode,
"\nextruder_duplication_enabled:", extruder_duplication_enabled,
"\nactive_extruder:", active_extruder,
"\n"
);
//*/
if (!did_pause_print) return;

6
Marlin/src/feature/power_loss_recovery.cpp
Unescape Escape View File

@ -357,8 +357,7 @@ void PrintJobRecovery::resume() {
void PrintJobRecovery::debug(PGM_P const prefix) {
serialprintPGM(prefix);
SERIAL_ECHOPAIR(" Job Recovery Info...\nvalid_head:", int(info.valid_head));
SERIAL_ECHOLNPAIR(" valid_foot:", int(info.valid_foot));
SERIAL_ECHOLNPAIR(" Job Recovery Info...\nvalid_head:", int(info.valid_head), " valid_foot:", int(info.valid_foot));
if (info.valid_head) {
if (info.valid_head == info.valid_foot) {
SERIAL_ECHOPGM("current_position: ");
@ -394,8 +393,7 @@ void PrintJobRecovery::resume() {
#endif
#if HAS_LEVELING
SERIAL_ECHOPAIR("leveling: ", int(info.leveling));
SERIAL_ECHOLNPAIR(" fade: ", int(info.fade));
SERIAL_ECHOLNPAIR("leveling: ", int(info.leveling), "\n fade: ", int(info.fade));
#endif
#if ENABLED(FWRETRACT)
SERIAL_ECHOPGM("retract: ");

9
Marlin/src/feature/prusa_MMU2/mmu2.cpp
Unescape Escape View File

@ -174,8 +174,7 @@ void MMU2::mmuLoop() {
sscanf(rx_buffer, "%uok\n", &version);
#if ENABLED(MMU2_DEBUG)
SERIAL_ECHOLNPAIR("MMU => ", version);
SERIAL_ECHOLNPGM("MMU <= 'S2'");
SERIAL_ECHOLNPAIR("MMU => ", version, "\nMMU <= 'S2'");
#endif
tx_str_P(PSTR("S2\n")); // read build number
@ -234,8 +233,7 @@ void MMU2::mmuLoop() {
sscanf(rx_buffer, "%hhuok\n", &finda);
#if ENABLED(MMU2_DEBUG)
SERIAL_ECHOLNPAIR("MMU => ", finda);
SERIAL_ECHOLNPGM("MMU - ENABLED");
SERIAL_ECHOLNPAIR("MMU => ", finda, "\nMMU - ENABLED");
#endif
enabled = true;
@ -309,8 +307,7 @@ void MMU2::mmuLoop() {
// filament type
int filament = cmd - MMU_CMD_F0;
#if ENABLED(MMU2_DEBUG)
SERIAL_ECHOPAIR("MMU <= F", filament);
SERIAL_ECHOPGM(" ");
SERIAL_ECHOPAIR("MMU <= F", filament, " ");
SERIAL_ECHO_F(cmd_arg, DEC);
SERIAL_ECHOPGM("\n");
#endif

4
Marlin/src/feature/twibus.cpp
Unescape Escape View File

@ -92,9 +92,7 @@ void TWIBus::send() {
void TWIBus::echoprefix(uint8_t bytes, const char prefix[], uint8_t adr) {
SERIAL_ECHO_START();
serialprintPGM(prefix);
SERIAL_ECHOPAIR(": from:", adr);
SERIAL_ECHOPAIR(" bytes:", bytes);
SERIAL_ECHOPGM(" data:");
SERIAL_ECHOPAIR(": from:", adr, " bytes:", bytes, " data:");
}
// static

7
Marlin/src/gcode/bedlevel/G26.cpp
Unescape Escape View File

@ -346,12 +346,7 @@ inline bool look_for_lines_to_connect() {
if (position_is_reachable(sx, sy) && position_is_reachable(ex, ey)) {
if (g26_debug_flag) {
SERIAL_ECHOPAIR(" Connecting with horizontal line (sx=", sx);
SERIAL_ECHOPAIR(", sy=", sy);
SERIAL_ECHOPAIR(") -> (ex=", ex);
SERIAL_ECHOPAIR(", ey=", ey);
SERIAL_CHAR(')');
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" Connecting with horizontal line (sx=", sx, ", sy=", sy, ") -> (ex=", ex, ", ey=", ey, ")");
//debug_current_and_destination(PSTR("Connecting horizontal line."));
}
print_line_from_here_to_there(sx, sy, g26_layer_height, ex, ey, g26_layer_height);

49
Marlin/src/gcode/parser.cpp
Unescape Escape View File

@ -272,8 +272,7 @@ void GCodeParser::parse(char *p) {
#if ENABLED(DEBUG_GCODE_PARSER)
if (debug) {
SERIAL_ECHOPAIR("Got letter ", code);
SERIAL_ECHOPAIR(" at index ", (int)(p - command_ptr - 1));
SERIAL_ECHOPAIR("Got letter ", code, " at index ", (int)(p - command_ptr - 1));
if (has_num) SERIAL_ECHOPGM(" (has_num)");
}
#endif
@ -329,47 +328,41 @@ void GCodeParser::parse(char *p) {
void GCodeParser::unknown_command_error() {
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(MSG_UNKNOWN_COMMAND, command_ptr);
SERIAL_CHAR('"');
SERIAL_EOL();
SERIAL_ECHOLNPAIR(MSG_UNKNOWN_COMMAND, command_ptr, "\"");
}
#if ENABLED(DEBUG_GCODE_PARSER)
void GCodeParser::debug() {
SERIAL_ECHOPAIR("Command: ", command_ptr);
SERIAL_ECHOPAIR(" (", command_letter);
SERIAL_ECHOPAIR("Command: ", command_ptr, " (", command_letter);
SERIAL_ECHO(codenum);
SERIAL_ECHOLNPGM(")");
#if ENABLED(FASTER_GCODE_PARSER)
SERIAL_ECHOPGM(" args: \"");
for (char c = 'A'; c <= 'Z'; ++c)
if (seen(c)) { SERIAL_CHAR(c); SERIAL_CHAR(' '); }
SERIAL_ECHOPGM(" args: { ");
for (char c = 'A'; c <= 'Z'; ++c) if (seen(c)) { SERIAL_CHAR(c); SERIAL_CHAR(' '); }
SERIAL_CHAR('}');
#else
SERIAL_ECHOPAIR(" args: \"", command_args);
SERIAL_ECHOPAIR(" args: { ", command_args, " }");
#endif
SERIAL_CHAR('"');
if (string_arg) {
SERIAL_ECHOPGM(" string: \"");
SERIAL_ECHO(string_arg);
SERIAL_CHAR('"');
}
if (string_arg) SERIAL_ECHOPAIR(" string: \"", string_arg, "\"");
SERIAL_ECHOLNPGM("\n");
for (char c = 'A'; c <= 'Z'; ++c) {
if (seen(c)) {
SERIAL_ECHOPAIR("Code '", c); SERIAL_ECHOPGM("':");
if (has_value()) {
SERIAL_ECHOPAIR("\n float: ", value_float());
SERIAL_ECHOPAIR("\n long: ", value_long());
SERIAL_ECHOPAIR("\n ulong: ", value_ulong());
SERIAL_ECHOPAIR("\n millis: ", value_millis());
SERIAL_ECHOPAIR("\n sec-ms: ", value_millis_from_seconds());
SERIAL_ECHOPAIR("\n int: ", value_int());
SERIAL_ECHOPAIR("\n ushort: ", value_ushort());
SERIAL_ECHOPAIR("\n byte: ", (int)value_byte());
SERIAL_ECHOPAIR("\n bool: ", (int)value_bool());
SERIAL_ECHOPAIR("\n linear: ", value_linear_units());
SERIAL_ECHOPAIR("\n celsius: ", value_celsius());
SERIAL_ECHOPAIR(
"\n float: ", value_float(),
"\n long: ", value_long(),
"\n ulong: ", value_ulong(),
"\n millis: ", value_millis(),
"\n sec-ms: ", value_millis_from_seconds(),
"\n int: ", value_int(),
"\n ushort: ", value_ushort(),
"\n byte: ", (int)value_byte(),
"\n bool: ", (int)value_bool(),
"\n linear: ", value_linear_units(),
"\n celsius: ", value_celsius()
);
}
else
SERIAL_ECHOPGM(" (no value)");

3
Marlin/src/gcode/parser.h
Unescape Escape View File

@ -120,8 +120,7 @@ public:
param[ind] = ptr ? ptr - command_ptr : 0; // parameter offset or 0
#if ENABLED(DEBUG_GCODE_PARSER)
if (codenum == 800) {
SERIAL_ECHOPAIR("Set bit ", (int)ind);
SERIAL_ECHOPAIR(" of codebits (", hex_address((void*)(codebits >> 16)));
SERIAL_ECHOPAIR("Set bit ", (int)ind, " of codebits (", hex_address((void*)(codebits >> 16)));
print_hex_word((uint16_t)(codebits & 0xFFFF));
SERIAL_ECHOLNPAIR(") | param = ", (int)param[ind]);
}

17
Marlin/src/gcode/queue.cpp
Unescape Escape View File

@ -150,9 +150,7 @@ bool enqueue_and_echo_command(const char* cmd) {
if (_enqueuecommand(cmd)) {
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(MSG_ENQUEUEING, cmd);
SERIAL_CHAR('"');
SERIAL_EOL();
SERIAL_ECHOLNPAIR(MSG_ENQUEUEING, cmd, "\"");
return true;
}
return false;
@ -398,9 +396,10 @@ void gcode_line_error(PGM_P const err, const int8_t port) {
stream_state = StreamState::PACKET_RESET;
bytes_received = 0;
time_stream_start = millis();
SERIAL_ECHOPAIR("echo: Datastream initialized (", stream_header.filesize);
SERIAL_ECHOLNPGM(" bytes expected)");
SERIAL_ECHOLNPAIR("so", buffer_size); // confirm active stream and the maximum block size supported
// confirm active stream and the maximum block size supported
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR("Datastream initialized (", stream_header.filesize, " bytes expected)");
SERIAL_ECHOLNPAIR("so", buffer_size);
}
else {
SERIAL_ECHO_MSG("Datastream init error (invalid token)");
@ -468,8 +467,7 @@ void gcode_line_error(PGM_P const err, const int8_t port) {
}
else {
SERIAL_ECHO_START();
SERIAL_ECHOPAIR("Block(", packet.header.id);
SERIAL_ECHOLNPGM(") Corrupt");
SERIAL_ECHOLNPAIR("Block(", packet.header.id, ") Corrupt");
stream_state = StreamState::PACKET_FLUSHRX;
}
break;
@ -504,8 +502,7 @@ void gcode_line_error(PGM_P const err, const int8_t port) {
card.flag.binary_mode = false;
SERIAL_ECHO_START();
SERIAL_ECHO(card.filename);
SERIAL_ECHOPAIR(" transfer completed @ ", ((bytes_received / (millis() - time_stream_start) * 1000) / 1024));
SERIAL_ECHOLNPGM("KiB/s");
SERIAL_ECHOLNPAIR(" transfer completed @ ", ((bytes_received / (millis() - time_stream_start) * 1000) / 1024), "KiB/s");
SERIAL_ECHOLNPGM("sc"); // transmit stream complete token
card.closefile();
return;

364
Marlin/src/module/configuration_store.cpp
Unescape Escape View File

@ -382,8 +382,8 @@ void MarlinSettings::postprocess() {
#if ENABLED(EEPROM_CHITCHAT)
#define CHITCHAT_ECHO(V) SERIAL_ECHO(V)
#define CHITCHAT_ECHOLNPGM(STR) SERIAL_ECHOLNPGM(STR)
#define CHITCHAT_ECHOPAIR(STR,V) SERIAL_ECHOPAIR(STR,V)
#define CHITCHAT_ECHOLNPAIR(STR,V) SERIAL_ECHOLNPAIR(STR,V)
#define CHITCHAT_ECHOPAIR(...) SERIAL_ECHOPAIR(__VA_ARGS__)
#define CHITCHAT_ECHOLNPAIR(...) SERIAL_ECHOLNPAIR(__VA_ARGS__)
#define CHITCHAT_ECHO_START() SERIAL_ECHO_START()
#define CHITCHAT_ERROR_START() SERIAL_ERROR_START()
#define CHITCHAT_ERROR_MSG(STR) SERIAL_ERROR_MSG(STR)
@ -392,8 +392,8 @@ void MarlinSettings::postprocess() {
#else
#define CHITCHAT_ECHO(V) NOOP
#define CHITCHAT_ECHOLNPGM(STR) NOOP
#define CHITCHAT_ECHOPAIR(STR,V) NOOP
#define CHITCHAT_ECHOLNPAIR(STR,V) NOOP
#define CHITCHAT_ECHOPAIR(...) NOOP
#define CHITCHAT_ECHOLNPAIR(...) NOOP
#define CHITCHAT_ECHO_START() NOOP
#define CHITCHAT_ERROR_START() NOOP
#define CHITCHAT_ERROR_MSG(STR) NOOP
@ -1104,9 +1104,7 @@ void MarlinSettings::postprocess() {
// Report storage size
CHITCHAT_ECHO_START();
CHITCHAT_ECHOPAIR("Settings Stored (", eeprom_size);
CHITCHAT_ECHOPAIR(" bytes; crc ", (uint32_t)final_crc);
CHITCHAT_ECHOLNPGM(")");
CHITCHAT_ECHOLNPAIR("Settings Stored (", eeprom_size, " bytes; crc ", (uint32_t)final_crc, ")");
eeprom_error |= size_error(eeprom_size);
}
@ -1144,9 +1142,7 @@ void MarlinSettings::postprocess() {
stored_ver[1] = '\0';
}
CHITCHAT_ECHO_START();
CHITCHAT_ECHOPGM("EEPROM version mismatch ");
CHITCHAT_ECHOPAIR("(EEPROM=", stored_ver);
CHITCHAT_ECHOLNPGM(" Marlin=" EEPROM_VERSION ")");
CHITCHAT_ECHOLNPAIR("EEPROM version mismatch (EEPROM=", stored_ver, " Marlin=" EEPROM_VERSION ")");
eeprom_error = true;
}
else {
@ -1812,24 +1808,17 @@ void MarlinSettings::postprocess() {
eeprom_error = size_error(eeprom_index - (EEPROM_OFFSET));
if (eeprom_error) {
CHITCHAT_ECHO_START();
CHITCHAT_ECHOPAIR("Index: ", int(eeprom_index - (EEPROM_OFFSET)));
CHITCHAT_ECHOLNPAIR(" Size: ", datasize());
CHITCHAT_ECHOLNPAIR("Index: ", int(eeprom_index - (EEPROM_OFFSET)), " Size: ", datasize());
}
else if (working_crc != stored_crc) {
eeprom_error = true;
CHITCHAT_ERROR_START();
CHITCHAT_ECHOPGM("EEPROM CRC mismatch - (stored) ");
CHITCHAT_ECHO(stored_crc);
CHITCHAT_ECHOPGM(" != ");
CHITCHAT_ECHO(working_crc);
CHITCHAT_ECHOLNPGM(" (calculated)!");
CHITCHAT_ECHOLNPAIR("EEPROM CRC mismatch - (stored) ", stored_crc, " != ", working_crc, " (calculated)!");
}
else if (!validating) {
CHITCHAT_ECHO_START();
CHITCHAT_ECHO(version);
CHITCHAT_ECHOPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET));
CHITCHAT_ECHOPAIR(" bytes; crc ", (uint32_t)working_crc);
CHITCHAT_ECHOLNPGM(")");
CHITCHAT_ECHOLNPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET), " bytes; crc ", (uint32_t)working_crc, ")");
}
if (!validating && !eeprom_error) postprocess();
@ -1857,8 +1846,7 @@ void MarlinSettings::postprocess() {
if (ubl.storage_slot >= 0) {
load_mesh(ubl.storage_slot);
CHITCHAT_ECHOPAIR("Mesh ", ubl.storage_slot);
CHITCHAT_ECHOLNPGM(" loaded from storage.");
CHITCHAT_ECHOLNPAIR("Mesh ", ubl.storage_slot, " loaded from storage.");
}
else {
ubl.reset();
@ -1924,9 +1912,7 @@ void MarlinSettings::postprocess() {
const int16_t a = calc_num_meshes();
if (!WITHIN(slot, 0, a - 1)) {
ubl_invalid_slot(a);
CHITCHAT_ECHOPAIR("E2END=", persistentStore.capacity() - 1);
CHITCHAT_ECHOPAIR(" meshes_end=", meshes_end);
CHITCHAT_ECHOLNPAIR(" slot=", slot);
CHITCHAT_ECHOLNPAIR("E2END=", persistentStore.capacity() - 1, " meshes_end=", meshes_end, " slot=", slot);
CHITCHAT_EOL();
return;
}
@ -2314,7 +2300,7 @@ void MarlinSettings::reset() {
#define CONFIG_ECHO_HEADING(STR) do{ if (!forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOLNPGM(STR); } }while(0)
#if HAS_TRINAMIC
void say_M906() { SERIAL_ECHOPGM(" M906"); }
inline void say_M906(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM(" M906"); }
#if HAS_STEALTHCHOP
void say_M569(const char * const etc=NULL) {
SERIAL_ECHOPGM(" M569 S1");
@ -2326,15 +2312,15 @@ void MarlinSettings::reset() {
}
#endif
#if ENABLED(HYBRID_THRESHOLD)
void say_M913() { SERIAL_ECHOPGM(" M913"); }
inline void say_M913() { SERIAL_ECHOPGM(" M913"); }
#endif
#if USE_SENSORLESS
void say_M914() { SERIAL_ECHOPGM(" M914"); }
inline void say_M914() { SERIAL_ECHOPGM(" M914"); }
#endif
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
void say_M603() { SERIAL_ECHOPGM(" M603 "); }
inline void say_M603(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM(" M603 "); }
#endif
inline void say_units(const bool colon) {
@ -2403,28 +2389,22 @@ void MarlinSettings::reset() {
}
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M200 D", LINEAR_UNIT(planner.filament_size[0]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M200 D", LINEAR_UNIT(planner.filament_size[0]));
#if EXTRUDERS > 1
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M200 T1 D", LINEAR_UNIT(planner.filament_size[1]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M200 T1 D", LINEAR_UNIT(planner.filament_size[1]));
#if EXTRUDERS > 2
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M200 T2 D", LINEAR_UNIT(planner.filament_size[2]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M200 T2 D", LINEAR_UNIT(planner.filament_size[2]));
#if EXTRUDERS > 3
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M200 T3 D", LINEAR_UNIT(planner.filament_size[3]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M200 T3 D", LINEAR_UNIT(planner.filament_size[3]));
#if EXTRUDERS > 4
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M200 T4 D", LINEAR_UNIT(planner.filament_size[4]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M200 T4 D", LINEAR_UNIT(planner.filament_size[4]));
#if EXTRUDERS > 5
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M200 T5 D", LINEAR_UNIT(planner.filament_size[5]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M200 T5 D", LINEAR_UNIT(planner.filament_size[5]));
#endif // EXTRUDERS > 5
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3
@ -2441,43 +2421,50 @@ void MarlinSettings::reset() {
CONFIG_ECHO_HEADING("Maximum feedrates (units/s):");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M203 X", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Z_AXIS]));
SERIAL_ECHOLNPAIR(
" M203 X", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[X_AXIS])
, " Y", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Y_AXIS])
, " Z", LINEAR_UNIT(planner.settings.max_feedrate_mm_s[Z_AXIS])
#if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS]));
, " E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS])
#endif
SERIAL_EOL();
);
#if ENABLED(DISTINCT_E_FACTORS)
CONFIG_ECHO_START();
for (uint8_t i = 0; i < E_STEPPERS; i++) {
SERIAL_ECHOPAIR(" M203 T", (int)i);
SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)]));
SERIAL_ECHOLNPAIR(
" M203 T", (int)i
, " E", VOLUMETRIC_UNIT(planner.settings.max_feedrate_mm_s[E_AXIS_N(i)])
);
}
#endif
CONFIG_ECHO_HEADING("Maximum Acceleration (units/s2):");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M201 X", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Z_AXIS]));
SERIAL_ECHOLNPAIR(
" M201 X", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[X_AXIS])
, " Y", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Y_AXIS])
, " Z", LINEAR_UNIT(planner.settings.max_acceleration_mm_per_s2[Z_AXIS])
#if DISABLED(DISTINCT_E_FACTORS)
SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS]));
, " E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS])
#endif
SERIAL_EOL();
);
#if ENABLED(DISTINCT_E_FACTORS)
CONFIG_ECHO_START();
for (uint8_t i = 0; i < E_STEPPERS; i++) {
SERIAL_ECHOPAIR(" M201 T", (int)i);
SERIAL_ECHOLNPAIR(" E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)]));
}
for (uint8_t i = 0; i < E_STEPPERS; i++)
SERIAL_ECHOLNPAIR(
" M201 T", (int)i
, " E", VOLUMETRIC_UNIT(planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(i)])
);
#endif
CONFIG_ECHO_HEADING("Acceleration (units/s2): P<print_accel> R<retract_accel> T<travel_accel>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M204 P", LINEAR_UNIT(planner.settings.acceleration));
SERIAL_ECHOPAIR(" R", LINEAR_UNIT(planner.settings.retract_acceleration));
SERIAL_ECHOLNPAIR(" T", LINEAR_UNIT(planner.settings.travel_acceleration));
SERIAL_ECHOLNPAIR(
" M204 P", LINEAR_UNIT(planner.settings.acceleration)
, " R", LINEAR_UNIT(planner.settings.retract_acceleration)
, " T", LINEAR_UNIT(planner.settings.travel_acceleration)
);
if (!forReplay) {
CONFIG_ECHO_START();
@ -2494,39 +2481,42 @@ void MarlinSettings::reset() {
SERIAL_EOL();
}
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M205 B", LINEAR_UNIT(planner.settings.min_segment_time_us));
SERIAL_ECHOPAIR(" S", LINEAR_UNIT(planner.settings.min_feedrate_mm_s));
SERIAL_ECHOPAIR(" T", LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s));
SERIAL_ECHOLNPAIR(
" M205 B", LINEAR_UNIT(planner.settings.min_segment_time_us)
, " S", LINEAR_UNIT(planner.settings.min_feedrate_mm_s)
, " T", LINEAR_UNIT(planner.settings.min_travel_feedrate_mm_s)
#if ENABLED(JUNCTION_DEVIATION)
SERIAL_ECHOPAIR(" J", LINEAR_UNIT(planner.junction_deviation_mm));
, " J", LINEAR_UNIT(planner.junction_deviation_mm)
#endif
#if HAS_CLASSIC_JERK
SERIAL_ECHOPAIR(" X", LINEAR_UNIT(planner.max_jerk[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_jerk[Y_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_jerk[Z_AXIS]));
, " X", LINEAR_UNIT(planner.max_jerk[X_AXIS])
, " Y", LINEAR_UNIT(planner.max_jerk[Y_AXIS])
, " Z", LINEAR_UNIT(planner.max_jerk[Z_AXIS])
#if DISABLED(JUNCTION_DEVIATION) || DISABLED(LIN_ADVANCE)
SERIAL_ECHOPAIR(" E", LINEAR_UNIT(planner.max_jerk[E_AXIS]));
, " E", LINEAR_UNIT(planner.max_jerk[E_AXIS])
#endif
#endif
SERIAL_EOL();
);
#if HAS_M206_COMMAND
CONFIG_ECHO_HEADING("Home offset:");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M206 X", LINEAR_UNIT(home_offset[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(home_offset[Y_AXIS]));
SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(home_offset[Z_AXIS]));
SERIAL_ECHOLNPAIR(
" M206 X", LINEAR_UNIT(home_offset[X_AXIS])
, " Y", LINEAR_UNIT(home_offset[Y_AXIS])
, " Z", LINEAR_UNIT(home_offset[Z_AXIS])
);
#endif
#if HAS_HOTEND_OFFSET
CONFIG_ECHO_HEADING("Hotend offsets:");
CONFIG_ECHO_START();
for (uint8_t e = 1; e < HOTENDS; e++) {
SERIAL_ECHOPAIR(" M218 T", (int)e);
SERIAL_ECHOPAIR(" X", LINEAR_UNIT(hotend_offset[X_AXIS][e]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(hotend_offset[Y_AXIS][e]));
SERIAL_ECHOPAIR(
" M218 T", (int)e
, " X", LINEAR_UNIT(hotend_offset[X_AXIS][e])
, " Y", LINEAR_UNIT(hotend_offset[Y_AXIS][e])
);
SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(hotend_offset[Z_AXIS][e]), 3);
}
#endif
@ -2555,11 +2545,12 @@ void MarlinSettings::reset() {
#endif
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M420 S", planner.leveling_active ? 1 : 0);
SERIAL_ECHOLNPAIR(
" M420 S", planner.leveling_active ? 1 : 0
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.z_fade_height));
, " Z", LINEAR_UNIT(planner.z_fade_height)
#endif
SERIAL_EOL();
);
#if ENABLED(MESH_BED_LEVELING)
@ -2567,8 +2558,7 @@ void MarlinSettings::reset() {
for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) {
for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" G29 S3 X", (int)px + 1);
SERIAL_ECHOPAIR(" Y", (int)py + 1);
SERIAL_ECHOPAIR(" G29 S3 X", (int)px + 1, " Y", (int)py + 1);
SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(mbl.z_values[px][py]), 5);
}
}
@ -2580,8 +2570,7 @@ void MarlinSettings::reset() {
SERIAL_EOL();
ubl.report_state();
SERIAL_ECHOLNPAIR("\nActive Mesh Slot: ", ubl.storage_slot);
SERIAL_ECHOPAIR("EEPROM can hold ", calc_num_meshes());
SERIAL_ECHOLNPGM(" meshes.\n");
SERIAL_ECHOLNPAIR("EEPROM can hold ", calc_num_meshes(), " meshes.\n");
}
//ubl.report_current_mesh(); // This is too verbose for large meshes. A better (more terse)
@ -2592,8 +2581,7 @@ void MarlinSettings::reset() {
for (uint8_t py = 0; py < GRID_MAX_POINTS_Y; py++) {
for (uint8_t px = 0; px < GRID_MAX_POINTS_X; px++) {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" G29 W I", (int)px);
SERIAL_ECHOPAIR(" J", (int)py);
SERIAL_ECHOPAIR(" G29 W I", (int)px, " J", (int)py);
SERIAL_ECHOLNPAIR_F(" Z", LINEAR_UNIT(z_values[px][py]), 5);
}
}
@ -2619,10 +2607,7 @@ void MarlinSettings::reset() {
case Z_PROBE_SERVO_NR:
#endif
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M281 P", int(i));
SERIAL_ECHOPAIR(" L", servo_angles[i][0]);
SERIAL_ECHOPAIR(" U", servo_angles[i][1]);
SERIAL_EOL();
SERIAL_ECHOLNPAIR(" M281 P", int(i), " L", servo_angles[i][0], " U", servo_angles[i][1]);
default: break;
}
}
@ -2633,33 +2618,37 @@ void MarlinSettings::reset() {
CONFIG_ECHO_HEADING("SCARA settings: S<seg-per-sec> P<theta-psi-offset> T<theta-offset>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M665 S", delta_segments_per_second);
SERIAL_ECHOPAIR(" P", scara_home_offset[A_AXIS]);
SERIAL_ECHOPAIR(" T", scara_home_offset[B_AXIS]);
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(scara_home_offset[Z_AXIS]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" M665 S", delta_segments_per_second
, " P", scara_home_offset[A_AXIS]
, " T", scara_home_offset[B_AXIS]
, " Z", LINEAR_UNIT(scara_home_offset[Z_AXIS])
);
#elif ENABLED(DELTA)
CONFIG_ECHO_HEADING("Endstop adjustment:");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M666 X", LINEAR_UNIT(delta_endstop_adj[X_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(delta_endstop_adj[Y_AXIS]));
SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(delta_endstop_adj[Z_AXIS]));
SERIAL_ECHOLNPAIR(
" M666 X", LINEAR_UNIT(delta_endstop_adj[X_AXIS])
, " Y", LINEAR_UNIT(delta_endstop_adj[Y_AXIS])
, " Z", LINEAR_UNIT(delta_endstop_adj[Z_AXIS])
);
CONFIG_ECHO_HEADING("Delta settings: L<diagonal_rod> R<radius> H<height> S<segments_per_s> B<calibration radius> XYZ<tower angle corrections>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M665 L", LINEAR_UNIT(delta_diagonal_rod));
SERIAL_ECHOPAIR(" R", LINEAR_UNIT(delta_radius));
SERIAL_ECHOPAIR(" H", LINEAR_UNIT(delta_height));
SERIAL_ECHOPAIR(" S", delta_segments_per_second);
SERIAL_ECHOPAIR(" B", LINEAR_UNIT(delta_calibration_radius));
SERIAL_ECHOPAIR(" X", LINEAR_UNIT(delta_tower_angle_trim[A_AXIS]));
SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(delta_tower_angle_trim[B_AXIS]));
SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS]));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" M665 L", LINEAR_UNIT(delta_diagonal_rod)
, " R", LINEAR_UNIT(delta_radius)
, " H", LINEAR_UNIT(delta_height)
, " S", delta_segments_per_second
, " B", LINEAR_UNIT(delta_calibration_radius)
, " X", LINEAR_UNIT(delta_tower_angle_trim[A_AXIS])
, " Y", LINEAR_UNIT(delta_tower_angle_trim[B_AXIS])
, " Z", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS])
);
#elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS)
#elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || Z_MULTI_ENDSTOPS
CONFIG_ECHO_HEADING("Endstop adjustment:");
CONFIG_ECHO_START();
@ -2686,10 +2675,12 @@ void MarlinSettings::reset() {
CONFIG_ECHO_HEADING("Material heatup parameters:");
for (uint8_t i = 0; i < COUNT(ui.preheat_hotend_temp); i++) {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M145 S", (int)i);
SERIAL_ECHOPAIR(" H", TEMP_UNIT(ui.preheat_hotend_temp[i]));
SERIAL_ECHOPAIR(" B", TEMP_UNIT(ui.preheat_bed_temp[i]));
SERIAL_ECHOLNPAIR(" F", int(ui.preheat_fan_speed[i]));
SERIAL_ECHOLNPAIR(
" M145 S", (int)i
, " H", TEMP_UNIT(ui.preheat_hotend_temp[i])
, " B", TEMP_UNIT(ui.preheat_bed_temp[i])
, " F", int(ui.preheat_fan_speed[i])
);
}
#endif
@ -2702,10 +2693,12 @@ void MarlinSettings::reset() {
if (forReplay) {
HOTEND_LOOP() {
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M301 E", e);
SERIAL_ECHOPAIR(" P", PID_PARAM(Kp, e));
SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, e)));
SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, e)));
SERIAL_ECHOPAIR(
" M301 E", e
, " P", PID_PARAM(Kp, e)
, " I", unscalePID_i(PID_PARAM(Ki, e))
, " D", unscalePID_d(PID_PARAM(Kd, e))
);
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, e));
if (e == 0) SERIAL_ECHOPAIR(" L", thermalManager.lpq_len);
@ -2718,23 +2711,25 @@ void MarlinSettings::reset() {
// !forReplay || HOTENDS == 1
{
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M301 P", PID_PARAM(Kp, 0)); // for compatibility with hosts, only echo values for E0
SERIAL_ECHOPAIR(" I", unscalePID_i(PID_PARAM(Ki, 0)));
SERIAL_ECHOPAIR(" D", unscalePID_d(PID_PARAM(Kd, 0)));
SERIAL_ECHOLNPAIR(
" M301 P", PID_PARAM(Kp, 0) // for compatibility with hosts, only echo values for E0
, " I", unscalePID_i(PID_PARAM(Ki, 0))
, " D", unscalePID_d(PID_PARAM(Kd, 0))
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR(" C", PID_PARAM(Kc, 0));
SERIAL_ECHOPAIR(" L", thermalManager.lpq_len);
, " C", PID_PARAM(Kc, 0)
, " L", thermalManager.lpq_len
#endif
SERIAL_EOL();
);
}
#endif // PIDTEMP
#if ENABLED(PIDTEMPBED)
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M304 P", thermalManager.bed_pid.Kp);
SERIAL_ECHOPAIR(" I", unscalePID_i(thermalManager.bed_pid.Ki));
SERIAL_ECHOPAIR(" D", unscalePID_d(thermalManager.bed_pid.Kd));
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" M304 P", thermalManager.bed_pid.Kp
, " I", unscalePID_i(thermalManager.bed_pid.Ki)
, " D", unscalePID_d(thermalManager.bed_pid.Kd)
);
#endif
#endif // PIDTEMP || PIDTEMPBED
@ -2755,16 +2750,20 @@ void MarlinSettings::reset() {
CONFIG_ECHO_HEADING("Retract: S<length> F<units/m> Z<lift>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M207 S", LINEAR_UNIT(fwretract.settings.retract_length));
SERIAL_ECHOPAIR(" W", LINEAR_UNIT(fwretract.settings.swap_retract_length));
SERIAL_ECHOPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_feedrate_mm_s)));
SERIAL_ECHOLNPAIR(" Z", LINEAR_UNIT(fwretract.settings.retract_zraise));
SERIAL_ECHOLNPAIR(
" M207 S", LINEAR_UNIT(fwretract.settings.retract_length)
, " W", LINEAR_UNIT(fwretract.settings.swap_retract_length)
, " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_feedrate_mm_s))
, " Z", LINEAR_UNIT(fwretract.settings.retract_zraise)
);
CONFIG_ECHO_HEADING("Recover: S<length> F<units/m>");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M208 S", LINEAR_UNIT(fwretract.settings.retract_recover_length));
SERIAL_ECHOPAIR(" W", LINEAR_UNIT(fwretract.settings.swap_retract_recover_length));
SERIAL_ECHOLNPAIR(" F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_recover_feedrate_mm_s)));
SERIAL_ECHOLNPAIR(
" M208 S", LINEAR_UNIT(fwretract.settings.retract_recover_length)
, " W", LINEAR_UNIT(fwretract.settings.swap_retract_recover_length)
, " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.settings.retract_recover_feedrate_mm_s))
);
#if ENABLED(FWRETRACT_AUTORETRACT)
@ -2810,67 +2809,65 @@ void MarlinSettings::reset() {
* TMC stepper driver current
*/
CONFIG_ECHO_HEADING("Stepper driver current:");
CONFIG_ECHO_START();
#if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
say_M906();
#endif
say_M906(forReplay);
SERIAL_ECHOLNPAIR(
#if AXIS_IS_TMC(X)
SERIAL_ECHOPAIR(" X", stepperX.getMilliamps());
" X", stepperX.getMilliamps(),
#endif
#if AXIS_IS_TMC(Y)
SERIAL_ECHOPAIR(" Y", stepperY.getMilliamps());
" Y", stepperY.getMilliamps(),
#endif
#if AXIS_IS_TMC(Z)
SERIAL_ECHOPAIR(" Z", stepperZ.getMilliamps());
" Z", stepperZ.getMilliamps()
#endif
#if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z)
SERIAL_EOL();
);
#endif
#if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
say_M906();
say_M906(forReplay);
SERIAL_ECHOPGM(" I1");
#endif
SERIAL_ECHOLNPAIR(
#if AXIS_IS_TMC(X2)
SERIAL_ECHOPAIR(" X", stepperX2.getMilliamps());
" X", stepperX2.getMilliamps(),
#endif
#if AXIS_IS_TMC(Y2)
SERIAL_ECHOPAIR(" Y", stepperY2.getMilliamps());
" Y", stepperY2.getMilliamps(),
#endif
#if AXIS_IS_TMC(Z2)
SERIAL_ECHOPAIR(" Z", stepperZ2.getMilliamps());
" Z", stepperZ2.getMilliamps()
#endif
#if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2)
SERIAL_EOL();
);
#endif
#if AXIS_IS_TMC(Z3)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.getMilliamps());
#endif
#if AXIS_IS_TMC(E0)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T0 E", stepperE0.getMilliamps());
#endif
#if AXIS_IS_TMC(E1)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T1 E", stepperE1.getMilliamps());
#endif
#if AXIS_IS_TMC(E2)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T2 E", stepperE2.getMilliamps());
#endif
#if AXIS_IS_TMC(E3)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T3 E", stepperE3.getMilliamps());
#endif
#if AXIS_IS_TMC(E4)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T4 E", stepperE4.getMilliamps());
#endif
#if AXIS_IS_TMC(E5)
say_M906();
say_M906(forReplay);
SERIAL_ECHOLNPAIR(" T5 E", stepperE5.getMilliamps());
#endif
SERIAL_EOL();
@ -2916,8 +2913,7 @@ void MarlinSettings::reset() {
#if AXIS_HAS_STEALTHCHOP(Z3)
say_M913();
SERIAL_ECHOPGM(" I2");
SERIAL_ECHOLNPAIR(" Z", TMC_GET_PWMTHRS(Z, Z3));
SERIAL_ECHOLNPAIR(" I2 Z", TMC_GET_PWMTHRS(Z, Z3));
#endif
#if AXIS_HAS_STEALTHCHOP(E0)
@ -2988,8 +2984,7 @@ void MarlinSettings::reset() {
#if HAS_Z3_SENSORLESS
say_M914();
SERIAL_ECHOPGM(" I2");
SERIAL_ECHOLNPAIR(" Z", stepperZ3.sgt());
SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.sgt());
#endif
#endif // USE_SENSORLESS
@ -3080,20 +3075,19 @@ void MarlinSettings::reset() {
#if EXTRUDERS < 2
SERIAL_ECHOLNPAIR(" M900 K", planner.extruder_advance_K[0]);
#else
LOOP_L_N(i, EXTRUDERS) {
SERIAL_ECHOPAIR(" M900 T", int(i));
SERIAL_ECHOLNPAIR(" K", planner.extruder_advance_K[i]);
}
LOOP_L_N(i, EXTRUDERS)
SERIAL_ECHOLNPAIR(" M900 T", int(i), " K", planner.extruder_advance_K[i]);
#endif
#endif
#if HAS_MOTOR_CURRENT_PWM
CONFIG_ECHO_HEADING("Stepper motor currents:");
CONFIG_ECHO_START();
SERIAL_ECHOPAIR(" M907 X", stepper.motor_current_setting[0]);
SERIAL_ECHOPAIR(" Z", stepper.motor_current_setting[1]);
SERIAL_ECHOPAIR(" E", stepper.motor_current_setting[2]);
SERIAL_EOL();
SERIAL_ECHOLNPAIR(
" M907 X", stepper.motor_current_setting[0]
, " Z", stepper.motor_current_setting[1]
, " E", stepper.motor_current_setting[2]
);
#endif
/**
@ -3101,39 +3095,21 @@ void MarlinSettings::reset() {
*/
#if ENABLED(ADVANCED_PAUSE_FEATURE)
CONFIG_ECHO_HEADING("Filament load/unload lengths:");
CONFIG_ECHO_START();
#if EXTRUDERS == 1
say_M603();
SERIAL_ECHOPAIR("L", LINEAR_UNIT(fc_settings[0].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[0].unload_length));
say_M603(forReplay);
SERIAL_ECHOLNPAIR("L", LINEAR_UNIT(fc_settings[0].load_length), " U", LINEAR_UNIT(fc_settings[0].unload_length));
#else
say_M603();
SERIAL_ECHOPAIR("T0 L", LINEAR_UNIT(fc_settings[0].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[0].unload_length));
CONFIG_ECHO_START();
say_M603();
SERIAL_ECHOPAIR("T1 L", LINEAR_UNIT(fc_settings[1].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[1].unload_length));
#define _ECHO_603(N) do{ say_M603(forReplay); SERIAL_ECHOLNPAIR("T" STRINGIFY(N) " L", LINEAR_UNIT(fc_settings[N].load_length), " U", LINEAR_UNIT(fc_settings[N].unload_length)); }while(0)
_ECHO_603(0);
_ECHO_603(1);
#if EXTRUDERS > 2
CONFIG_ECHO_START();
say_M603();
SERIAL_ECHOPAIR("T2 L", LINEAR_UNIT(fc_settings[2].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[2].unload_length));
_ECHO_603(2);
#if EXTRUDERS > 3
CONFIG_ECHO_START();
say_M603();
SERIAL_ECHOPAIR("T3 L", LINEAR_UNIT(fc_settings[3].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[3].unload_length));
_ECHO_603(3);
#if EXTRUDERS > 4
CONFIG_ECHO_START();
say_M603();
SERIAL_ECHOPAIR("T4 L", LINEAR_UNIT(fc_settings[4].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[4].unload_length));
_ECHO_603(4);
#if EXTRUDERS > 5
CONFIG_ECHO_START();
say_M603();
SERIAL_ECHOPAIR("T5 L", LINEAR_UNIT(fc_settings[5].load_length));
SERIAL_ECHOLNPAIR(" U", LINEAR_UNIT(fc_settings[5].unload_length));
_ECHO_603(5);
#endif // EXTRUDERS > 5
#endif // EXTRUDERS > 4
#endif // EXTRUDERS > 3

41
Marlin/src/module/printcounter.cpp
Unescape Escape View File

@ -185,51 +185,32 @@ void PrintCounter::showStats() {
char buffer[21];
SERIAL_ECHOPGM(MSG_STATS);
SERIAL_ECHOLNPAIR(
"Prints: ", data.totalPrints,
", Finished: ", data.finishedPrints,
", Failed: ", data.totalPrints - data.finishedPrints
- ((isRunning() || isPaused()) ? 1 : 0) // Remove 1 from failures with an active counter
);
SERIAL_ECHOPGM("Prints: ");
SERIAL_ECHO(data.totalPrints);
SERIAL_ECHOPGM(", Finished: ");
SERIAL_ECHO(data.finishedPrints);
SERIAL_ECHOPGM(", Failed: "); // Note: Removes 1 from failures with an active counter
SERIAL_ECHO(data.totalPrints - data.finishedPrints
- ((isRunning() || isPaused()) ? 1 : 0));
SERIAL_EOL();
SERIAL_ECHOPGM(MSG_STATS);
duration_t elapsed = data.printTime;
elapsed.toString(buffer);
SERIAL_ECHOPGM("Total time: ");
SERIAL_ECHO(buffer);
SERIAL_ECHOPAIR("Total time: ", buffer);
#if ENABLED(DEBUG_PRINTCOUNTER)
SERIAL_ECHOPGM(" (");
SERIAL_ECHO(data.printTime);
SERIAL_ECHOPAIR(" (", data.printTime);
SERIAL_CHAR(')');
#endif
elapsed = data.longestPrint;
elapsed.toString(buffer);
SERIAL_ECHOPGM(", Longest job: ");
SERIAL_ECHO(buffer);
SERIAL_ECHOPAIR(", Longest job: ", buffer);
#if ENABLED(DEBUG_PRINTCOUNTER)
SERIAL_ECHOPGM(" (");
SERIAL_ECHO(data.longestPrint);
SERIAL_ECHOPAIR(" (", data.longestPrint);
SERIAL_CHAR(')');
#endif
SERIAL_EOL();
SERIAL_ECHOPGM(MSG_STATS);
SERIAL_ECHOPGM("Filament used: ");
SERIAL_ECHO(data.filamentUsed / 1000);
SERIAL_ECHOPAIR("\n" MSG_STATS "Filament used: ", data.filamentUsed / 1000);
SERIAL_CHAR('m');
SERIAL_EOL();
#if SERVICE_INTERVAL_1 > 0

37
Marlin/src/module/probe.cpp
Unescape Escape View File

@ -83,11 +83,7 @@ float zprobe_zoffset; // Initialized by settings.load()
*/
static void dock_sled(bool stow) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("dock_sled(", stow);
SERIAL_CHAR(')');
SERIAL_EOL();
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("dock_sled(", stow, ")");
#endif
// Dock sled a bit closer to ensure proper capturing
@ -317,11 +313,7 @@ float zprobe_zoffset; // Initialized by settings.load()
bltouch_command(deploy ? BLTOUCH_DEPLOY : BLTOUCH_STOW);
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("set_bltouch_deployed(", deploy);
SERIAL_CHAR(')');
SERIAL_EOL();
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("set_bltouch_deployed(", deploy, ")");
#endif
return false;
@ -334,11 +326,7 @@ float zprobe_zoffset; // Initialized by settings.load()
*/
inline void do_probe_raise(const float z_raise) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("do_probe_raise(", z_raise);
SERIAL_CHAR(')');
SERIAL_EOL();
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("do_probe_raise(", z_raise, ")");
#endif
float z_dest = z_raise;
@ -707,10 +695,7 @@ static float run_z_probe() {
const float z2 = current_position[Z_AXIS];
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("2nd Probe Z:", z2);
SERIAL_ECHOLNPAIR(" Discrepancy:", first_probe_z - z2);
}
if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPAIR("2nd Probe Z:", z2, " Discrepancy:", first_probe_z - z2);
#endif
// Return a weighted average of the fast and slow probes
@ -742,12 +727,14 @@ static float run_z_probe() {
float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after/*=PROBE_PT_NONE*/, const uint8_t verbose_level/*=0*/, const bool probe_relative/*=true*/) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR(">>> probe_pt(", LOGICAL_X_POSITION(rx));
SERIAL_ECHOPAIR(", ", LOGICAL_Y_POSITION(ry));
SERIAL_ECHOPAIR(", ", raise_after == PROBE_PT_RAISE ? "raise" : raise_after == PROBE_PT_STOW ? "stow" : "none");
SERIAL_ECHOPAIR(", ", int(verbose_level));
SERIAL_ECHOPAIR(", ", probe_relative ? "probe" : "nozzle");
SERIAL_ECHOLNPGM("_relative)");
SERIAL_ECHOLNPAIR(
">>> probe_pt(", LOGICAL_X_POSITION(rx),
", ", LOGICAL_Y_POSITION(ry),
", ", raise_after == PROBE_PT_RAISE ? "raise" : raise_after == PROBE_PT_STOW ? "stow" : "none",
", ", int(verbose_level),
", ", probe_relative ? "probe" : "nozzle",
"_relative)"
);
DEBUG_POS("", current_position);
}
#endif

33
Marlin/src/module/scara.cpp
Unescape Escape View File

@ -45,8 +45,7 @@ void scara_set_axis_is_at_home(const AxisEnum axis) {
float homeposition[XYZ];
LOOP_XYZ(i) homeposition[i] = base_home_pos((AxisEnum)i);
// SERIAL_ECHOPAIR("homeposition X:", homeposition[X_AXIS]);
// SERIAL_ECHOLNPAIR(" Y:", homeposition[Y_AXIS]);
// SERIAL_ECHOLNPAIR("homeposition X:", homeposition[X_AXIS], " Y:", homeposition[Y_AXIS]);
/**
* Get Home position SCARA arm angles using inverse kinematics,
@ -55,8 +54,7 @@ void scara_set_axis_is_at_home(const AxisEnum axis) {
inverse_kinematics(homeposition);
forward_kinematics_SCARA(delta[A_AXIS], delta[B_AXIS]);
// SERIAL_ECHOPAIR("Cartesian X:", cartes[X_AXIS]);
// SERIAL_ECHOLNPAIR(" Y:", cartes[Y_AXIS]);
// SERIAL_ECHOLNPAIR("Cartesian X:", cartes[X_AXIS], " Y:", cartes[Y_AXIS]);
current_position[axis] = cartes[axis];
@ -80,14 +78,15 @@ void forward_kinematics_SCARA(const float &a, const float &b) {
cartes[Y_AXIS] = a_sin + b_sin + SCARA_OFFSET_Y; //theta+phi
/*
SERIAL_ECHOPAIR("SCARA FK Angle a=", a);
SERIAL_ECHOPAIR(" b=", b);
SERIAL_ECHOPAIR(" a_sin=", a_sin);
SERIAL_ECHOPAIR(" a_cos=", a_cos);
SERIAL_ECHOPAIR(" b_sin=", b_sin);
SERIAL_ECHOLNPAIR(" b_cos=", b_cos);
SERIAL_ECHOPAIR(" cartes[X_AXIS]=", cartes[X_AXIS]);
SERIAL_ECHOLNPAIR(" cartes[Y_AXIS]=", cartes[Y_AXIS]);
SERIAL_ECHOLNPAIR(
"SCARA FK Angle a=", a,
" b=", b,
" a_sin=", a_sin,
" a_cos=", a_cos,
" b_sin=", b_sin,
" b_cos=", b_cos
);
SERIAL_ECHOLNPAIR(" cartes (X,Y) = "(cartes[X_AXIS], ", ", cartes[Y_AXIS], ")");
//*/
}
@ -132,18 +131,12 @@ void inverse_kinematics(const float (&raw)[XYZ]) {
/*
DEBUG_POS("SCARA IK", raw);
DEBUG_POS("SCARA IK", delta);
SERIAL_ECHOPAIR(" SCARA (x,y) ", sx);
SERIAL_ECHOPAIR(",", sy);
SERIAL_ECHOPAIR(" C2=", C2);
SERIAL_ECHOPAIR(" S2=", S2);
SERIAL_ECHOPAIR(" Theta=", THETA);
SERIAL_ECHOLNPAIR(" Phi=", PHI);
SERIAL_ECHOLNPAIR(" SCARA (x,y) ", sx, ",", sy, " C2=", C2, " S2=", S2, " Theta=", THETA, " Phi=", PHI);
//*/
}
void scara_report_positions() {
SERIAL_ECHOPAIR("SCARA Theta:", planner.get_axis_position_degrees(A_AXIS));
SERIAL_ECHOLNPAIR(" Psi+Theta:", planner.get_axis_position_degrees(B_AXIS));
SERIAL_ECHOLNPAIR("SCARA Theta:", planner.get_axis_position_degrees(A_AXIS), " Psi+Theta:", planner.get_axis_position_degrees(B_AXIS));
SERIAL_EOL();
}

57
Marlin/src/module/temperature.cpp
Unescape Escape View File

@ -456,37 +456,26 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
bias = constrain(bias, 20, max_pow - 20);
d = (bias > max_pow >> 1) ? max_pow - 1 - bias : bias;
SERIAL_ECHOPAIR(MSG_BIAS, bias);
SERIAL_ECHOPAIR(MSG_D, d);
SERIAL_ECHOPAIR(MSG_T_MIN, min);
SERIAL_ECHOPAIR(MSG_T_MAX, max);
SERIAL_ECHOPAIR(MSG_BIAS, bias, MSG_D, d, MSG_T_MIN, min, MSG_T_MAX, max);
if (cycles > 2) {
float Ku = (4.0f * d) / (float(M_PI) * (max - min) * 0.5f),
Tu = ((float)(t_low + t_high) * 0.001f);
SERIAL_ECHOPAIR(MSG_KU, Ku);
SERIAL_ECHOPAIR(MSG_TU, Tu);
tune_pid.Kp = 0.6f * Ku;
tune_pid.Ki = 2 * tune_pid.Kp / Tu;
tune_pid.Kd = tune_pid.Kp * Tu * 0.125f;
SERIAL_ECHOPAIR(MSG_KU, Ku, MSG_TU, Tu);
SERIAL_ECHOLNPGM("\n" MSG_CLASSIC_PID);
SERIAL_ECHOPAIR(MSG_KP, tune_pid.Kp);
SERIAL_ECHOPAIR(MSG_KI, tune_pid.Ki);
SERIAL_ECHOLNPAIR(MSG_KD, tune_pid.Kd);
SERIAL_ECHOLNPAIR(MSG_KP, tune_pid.Kp, MSG_KI, tune_pid.Ki, MSG_KD, tune_pid.Kd);
/**
tune_pid.Kp = 0.33*Ku;
tune_pid.Ki = tune_pid.Kp/Tu;
tune_pid.Kd = tune_pid.Kp*Tu/3;
SERIAL_ECHOLNPGM(" Some overshoot");
SERIAL_ECHOPAIR(" Kp: ", tune_pid.Kp);
SERIAL_ECHOPAIR(" Ki: ", tune_pid.Ki);
SERIAL_ECHOPAIR(" Kd: ", tune_pid.Kd);
SERIAL_ECHOLNPAIR(" Kp: ", tune_pid.Kp, " Ki: ", tune_pid.Ki, " Kd: ", tune_pid.Kd, " No overshoot");
tune_pid.Kp = 0.2*Ku;
tune_pid.Ki = 2*tune_pid.Kp/Tu;
tune_pid.Kd = tune_pid.Kp*Tu/3;
SERIAL_ECHOLNPGM(" No overshoot");
SERIAL_ECHOPAIR(" Kp: ", tune_pid.Kp);
SERIAL_ECHOPAIR(" Ki: ", tune_pid.Ki);
SERIAL_ECHOPAIR(" Kd: ", tune_pid.Kd);
SERIAL_ECHOPAIR(" Kp: ", tune_pid.Kp, " Ki: ", tune_pid.Ki, " Kd: ", tune_pid.Kd);
*/
}
}
@ -807,16 +796,20 @@ float Temperature::get_pid_output(const int8_t e) {
#if ENABLED(PID_DEBUG)
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(MSG_PID_DEBUG, HOTEND_INDEX);
SERIAL_ECHOPAIR(MSG_PID_DEBUG_INPUT, current_temperature[HOTEND_INDEX]);
SERIAL_ECHOPAIR(MSG_PID_DEBUG_OUTPUT, pid_output);
SERIAL_ECHOPAIR(
MSG_PID_DEBUG, HOTEND_INDEX,
MSG_PID_DEBUG_INPUT, current_temperature[HOTEND_INDEX],
MSG_PID_DEBUG_OUTPUT, pid_output
);
#if DISABLED(PID_OPENLOOP)
SERIAL_ECHOPAIR(MSG_PID_DEBUG_PTERM, work_pid[HOTEND_INDEX].Kp);
SERIAL_ECHOPAIR(MSG_PID_DEBUG_ITERM, work_pid[HOTEND_INDEX].Ki);
SERIAL_ECHOPAIR(MSG_PID_DEBUG_DTERM, work_pid[HOTEND_INDEX].Kd);
#if ENABLED(PID_EXTRUSION_SCALING)
SERIAL_ECHOPAIR(MSG_PID_DEBUG_CTERM, work_pid[HOTEND_INDEX].Kc);
SERIAL_ECHOPAIR(
MSG_PID_DEBUG_PTERM, work_pid[HOTEND_INDEX].Kp,
MSG_PID_DEBUG_ITERM, work_pid[HOTEND_INDEX].Ki,
MSG_PID_DEBUG_DTERM, work_pid[HOTEND_INDEX].Kd
#if ENABLED(PID_EXTRUSION_SCALING),
MSG_PID_DEBUG_CTERM, work_pid[HOTEND_INDEX].Kc
#endif
);
#endif
SERIAL_EOL();
#endif // PID_DEBUG
@ -869,13 +862,14 @@ float Temperature::get_pid_output(const int8_t e) {
#if ENABLED(PID_BED_DEBUG)
SERIAL_ECHO_START();
SERIAL_ECHOPAIR(" PID_BED_DEBUG : Input ", current_temperature_bed);
SERIAL_ECHOPAIR(" Output ", pid_output);
SERIAL_ECHOLNPAIR(
" PID_BED_DEBUG : Input ", current_temperature_bed, " Output ", pid_output,
#if DISABLED(PID_OPENLOOP)
SERIAL_ECHOPAIR(MSG_PID_DEBUG_PTERM, work_pid.Kp);
SERIAL_ECHOPAIR(MSG_PID_DEBUG_ITERM, work_pid.Ki);
SERIAL_ECHOLNPAIR(MSG_PID_DEBUG_DTERM, work_pid.Kd);
MSG_PID_DEBUG_PTERM, work_pid.Kp,
MSG_PID_DEBUG_ITERM, work_pid.Ki,
MSG_PID_DEBUG_DTERM, work_pid.Kd,
#endif
);
#endif
return pid_output;
@ -1622,10 +1616,7 @@ void Temperature::init() {
SERIAL_ECHO_START();
SERIAL_ECHOPGM("Thermal Thermal Runaway Running. Heater ID: ");
if (heater_id < 0) SERIAL_ECHOPGM("bed"); else SERIAL_ECHO(heater_id);
SERIAL_ECHOPAIR(" ; State:", *state);
SERIAL_ECHOPAIR(" ; Timer:", *timer);
SERIAL_ECHOPAIR(" ; Temperature:", current);
SERIAL_ECHOPAIR(" ; Target Temp:", target);
SERIAL_ECHOPAIR(" ; State:", *state, " ; Timer:", *timer, " ; Temperature:", current, " ; Target Temp:", target);
if (heater_id >= 0)
SERIAL_ECHOPAIR(" ; Idle Timeout:", heater_idle_timeout_exceeded[heater_id]);
else

8
Marlin/src/module/tool_change.cpp
Unescape Escape View File

@ -804,12 +804,8 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) {
SERIAL_ECHOPAIR("Offset Tool XY by { ", xdiff);
SERIAL_ECHOPAIR(", ", ydiff);
SERIAL_ECHOPAIR(", ", zdiff);
SERIAL_ECHOLNPGM(" }");
}
if (DEBUGGING(LEVELING))
SERIAL_ECHOLNPAIR("Offset Tool XY by { ", xdiff, ", ", ydiff, ", ", zdiff, " }");
#endif
// The newly-selected extruder XY is actually at...

38
Marlin/src/sd/cardreader.cpp
Unescape Escape View File

@ -438,9 +438,7 @@ void CardReader::openFile(char * const path, const bool read, const bool subcall
filespos[file_subcall_ctr] = sdpos;
SERIAL_ECHO_START();
SERIAL_ECHOPAIR("SUBROUTINE CALL target:\"", path);
SERIAL_ECHOPAIR("\" parent:\"", proc_filenames[file_subcall_ctr]);
SERIAL_ECHOLNPAIR("\" pos", sdpos);
SERIAL_ECHOLNPAIR("SUBROUTINE CALL target:\"", path, "\" parent:\"", proc_filenames[file_subcall_ctr], "\" pos", sdpos);
file_subcall_ctr++;
}
else
@ -470,8 +468,7 @@ void CardReader::openFile(char * const path, const bool read, const bool subcall
if (file.open(curDir, fname, O_READ)) {
filesize = file.fileSize();
sdpos = 0;
SERIAL_ECHOPAIR(MSG_SD_FILE_OPENED, fname);
SERIAL_ECHOLNPAIR(MSG_SD_SIZE, filesize);
SERIAL_ECHOLNPAIR(MSG_SD_FILE_OPENED, fname, MSG_SD_SIZE, filesize);
SERIAL_ECHOLNPGM(MSG_SD_FILE_SELECTED);
getfilename(0, fname);
@ -480,18 +477,12 @@ void CardReader::openFile(char * const path, const bool read, const bool subcall
// SERIAL_ECHOPAIR(MSG_SD_FILE_LONG_NAME, longFilename);
//}
}
else {
SERIAL_ECHOPAIR(MSG_SD_OPEN_FILE_FAIL, fname);
SERIAL_CHAR('.');
SERIAL_EOL();
}
else
SERIAL_ECHOLNPAIR(MSG_SD_OPEN_FILE_FAIL, fname, ".");
}
else { //write
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
SERIAL_ECHOPAIR(MSG_SD_OPEN_FILE_FAIL, fname);
SERIAL_CHAR('.');
SERIAL_EOL();
}
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC))
SERIAL_ECHOLNPAIR(MSG_SD_OPEN_FILE_FAIL, fname, ".");
else {
flag.saving = true;
getfilename(0, fname);
@ -520,10 +511,8 @@ void CardReader::removeFile(const char * const name) {
presort();
#endif
}
else {
SERIAL_ECHOPAIR("Deletion failed, File: ", fname);
SERIAL_CHAR('.');
}
else
SERIAL_ECHOLNPAIR("Deletion failed, File: ", fname, ".");
}
void CardReader::report_status() {
@ -669,9 +658,7 @@ const char* CardReader::diveToFile(SdFile*& curDir, const char * const path, con
if (echo) SERIAL_ECHOLN(dosSubdirname);
if (!myDir.open(curDir, dosSubdirname, O_READ)) {
SERIAL_ECHOPAIR(MSG_SD_OPEN_FILE_FAIL, dosSubdirname);
SERIAL_CHAR('.');
SERIAL_EOL();
SERIAL_ECHOLNPAIR(MSG_SD_OPEN_FILE_FAIL, dosSubdirname, ".");
return NULL;
}
curDir = &myDir;
@ -1030,11 +1017,8 @@ void CardReader::printingHasFinished() {
void CardReader::openJobRecoveryFile(const bool read) {
if (!isDetected()) return;
if (recovery.file.isOpen()) return;
if (!recovery.file.open(&root, job_recovery_file_name, read ? O_READ : O_CREAT | O_WRITE | O_TRUNC | O_SYNC)) {
SERIAL_ECHOPAIR(MSG_SD_OPEN_FILE_FAIL, job_recovery_file_name);
SERIAL_CHAR('.');
SERIAL_EOL();
}
if (!recovery.file.open(&root, job_recovery_file_name, read ? O_READ : O_CREAT | O_WRITE | O_TRUNC | O_SYNC))
SERIAL_ECHOLNPAIR(MSG_SD_OPEN_FILE_FAIL, job_recovery_file_name, ".");
else if (!read)
SERIAL_ECHOLNPAIR(MSG_SD_WRITE_TO_FILE, job_recovery_file_name);
}

Write Preview
Loading…
Cancel
Save