Use do_blocking_move_to(ref, fr)

Marlin/src/gcode/calibrate/G425.cpp

@@ -111,7 +111,7 @@ inline void move_to(
   destination[Z_AXIS] = MAX(MIN(destination[Z_AXIS], Z_MAX_POS), Z_MIN_POS);
 
   // Move to position
-  do_blocking_move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], MMM_TO_MMS(CALIBRATION_FEEDRATE_TRAVEL));
+  do_blocking_move_to(destination, MMM_TO_MMS(CALIBRATION_FEEDRATE_TRAVEL));
 }
 
 /**
@@ -182,7 +182,7 @@ float measuring_movement(const AxisEnum axis, const int dir, const bool stop_sta
   set_destination_from_current();
   for (float travel = 0; travel < limit; travel += step) {
     destination[axis] += dir * step;
-    do_blocking_move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], mms);
+    do_blocking_move_to(destination, mms);
     planner.synchronize();
     if (read_calibration_pin() == stop_state)
       break;
@@ -214,7 +214,7 @@ inline float measure(const AxisEnum axis, const int dir, const bool stop_state,
   }
   // Return to starting position
   destination[axis] = start_pos;
-  do_blocking_move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], MMM_TO_MMS(CALIBRATION_FEEDRATE_TRAVEL));
+  do_blocking_move_to(destination, MMM_TO_MMS(CALIBRATION_FEEDRATE_TRAVEL));
   return measured_pos;
 }
 

Marlin/src/module/motion.h

@@ -170,11 +170,11 @@ void do_blocking_move_to_x(const float &rx, const float &fr_mm_s=0);
 void do_blocking_move_to_z(const float &rz, const float &fr_mm_s=0);
 void do_blocking_move_to_xy(const float &rx, const float &ry, const float &fr_mm_s=0);
 
-FORCE_INLINE void do_blocking_move_to(const float (&raw)[XYZ], const float &fr_mm_s) {
+FORCE_INLINE void do_blocking_move_to(const float (&raw)[XYZ], const float &fr_mm_s=0) {
   do_blocking_move_to(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], fr_mm_s);
 }
 
-FORCE_INLINE void do_blocking_move_to(const float (&raw)[XYZE], const float &fr_mm_s) {
+FORCE_INLINE void do_blocking_move_to(const float (&raw)[XYZE], const float &fr_mm_s=0) {
   do_blocking_move_to(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], fr_mm_s);
 }
 

Marlin/src/module/tool_change.cpp

@@ -868,7 +868,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
         #endif
 
         // Move back to the original (or tweaked) position
-        do_blocking_move_to(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS]);
+        do_blocking_move_to(destination);
         #if ENABLED(DUAL_X_CARRIAGE)
           active_extruder_parked = false;
         #endif