microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Spacing cleanup

Browse Source
2.0.x
Scott Lahteine 7 years ago
parent 9e9e29ddf8
commit c6ff39cc14
64 changed files with 1005 additions and 1005 deletions
Show Stats Download Patch File Download Diff File

30
Marlin/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/default/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

54
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
Unescape Escape View File

@ -378,29 +378,29 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Buda 2.0 on 24V // Buda 2.0 on 24V
#define DEFAULT_Kp 6 #define DEFAULT_Kp 6
#define DEFAULT_Ki .3 #define DEFAULT_Ki .3
#define DEFAULT_Kd 125 #define DEFAULT_Kd 125
// Buda 2.0 on 12V // Buda 2.0 on 12V
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.01 //#define DEFAULT_Ki 1.01
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -431,27 +431,27 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port. //#define PID_BED_DEBUG // Sends debug data to the serial port.
//24V 360W silicone heater from NPH on 3mm borosilicate (TAZ 2.2+) //24V 360W silicone heater from NPH on 3mm borosilicate (TAZ 2.2+)
#define DEFAULT_bedKp 20 #define DEFAULT_bedKp 20
#define DEFAULT_bedKi 5 #define DEFAULT_bedKi 5
#define DEFAULT_bedKd 275 #define DEFAULT_bedKd 275
//12v 400W silicone heater from QUDB into 3mm borosilicate (TAZ 1.0+) //12v 400W silicone heater from QUDB into 3mm borosilicate (TAZ 1.0+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 650 //#define DEFAULT_bedKp 650
//#define DEFAULT_bedKi 60 //#define DEFAULT_bedKi 60
//#define DEFAULT_bedKd 1800 //#define DEFAULT_bedKd 1800
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

54
Marlin/src/config/examples/Anet/A6/Configuration.h
Unescape Escape View File

@ -379,30 +379,30 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
// ANET A6 Firmware V2.0 Standard Extruder defaults: // ANET A6 Firmware V2.0 Standard Extruder defaults:
// PID-P: +022.20, PID-I: +001.08, PID-D: +114.00, PID-C: 1 // PID-P: +022.20, PID-I: +001.08, PID-D: +114.00, PID-C: 1
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114.0 //#define DEFAULT_Kd 114.0
// Tuned by ralf-e. Always re-tune for your machine! // Tuned by ralf-e. Always re-tune for your machine!
#define DEFAULT_Kp 16.83 #define DEFAULT_Kp 16.83
#define DEFAULT_Ki 1.02 #define DEFAULT_Ki 1.02
#define DEFAULT_Kd 69.29 #define DEFAULT_Kd 69.29
#endif // PIDTEMP #endif // PIDTEMP
@ -434,24 +434,24 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// ANET A6 // ANET A6
// original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5): // original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5):
//#define DEFAULT_bedKp 295.00 //#define DEFAULT_bedKp 295.00
//#define DEFAULT_bedKi 35.65 //#define DEFAULT_bedKi 35.65
//#define DEFAULT_bedKd 610.21 //#define DEFAULT_bedKd 610.21
#define DEFAULT_bedKp 295.00 #define DEFAULT_bedKp 295.00
#define DEFAULT_bedKi 35.65 #define DEFAULT_bedKi 35.65
#define DEFAULT_bedKd 610.21 #define DEFAULT_bedKd 610.21
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

36
Marlin/src/config/examples/Anet/A8/Configuration.h
Unescape Escape View File

@ -380,25 +380,25 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 21.0 //#define DEFAULT_Kp 21.0
//#define DEFAULT_Ki 1.25 //#define DEFAULT_Ki 1.25
//#define DEFAULT_Kd 86.0 //#define DEFAULT_Kd 86.0
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
// ANET A8 Standard Extruder at 210 Degree Celsius and 100% Fan // ANET A8 Standard Extruder at 210 Degree Celsius and 100% Fan
//(measured after M106 S255 with M303 E0 S210 C8) //(measured after M106 S255 with M303 E0 S210 C8)
#define DEFAULT_Kp 21.0 #define DEFAULT_Kp 21.0
#define DEFAULT_Ki 1.25 #define DEFAULT_Ki 1.25
#define DEFAULT_Kd 86.0 #define DEFAULT_Kd 86.0
#endif // PIDTEMP #endif // PIDTEMP
@ -430,15 +430,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 23.89 #define DEFAULT_Kp 23.89
#define DEFAULT_Ki 1.37 #define DEFAULT_Ki 1.37
#define DEFAULT_Kd 104.5 #define DEFAULT_Kd 104.5
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 23.89 #define DEFAULT_bedKp 23.89
#define DEFAULT_bedKi 1.37 #define DEFAULT_bedKi 1.37
#define DEFAULT_bedKd 104.5 #define DEFAULT_bedKd 104.5
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 23.89 #define DEFAULT_Kp 23.89
#define DEFAULT_Ki 1.37 #define DEFAULT_Ki 1.37
#define DEFAULT_Kd 104.5 #define DEFAULT_Kd 104.5
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 23.89 #define DEFAULT_bedKp 23.89
#define DEFAULT_bedKi 1.37 #define DEFAULT_bedKi 1.37
#define DEFAULT_bedKd 104.5 #define DEFAULT_bedKd 104.5
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

18
Marlin/src/config/examples/BQ/Hephestos/Configuration.h
Unescape Escape View File

@ -377,9 +377,9 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Hephestos i3 // Hephestos i3
#define DEFAULT_Kp 23.05 #define DEFAULT_Kp 23.05
#define DEFAULT_Ki 2.00 #define DEFAULT_Ki 2.00
#define DEFAULT_Kd 66.47 #define DEFAULT_Kd 66.47
#endif // PIDTEMP #endif // PIDTEMP
@ -411,15 +411,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

24
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
Unescape Escape View File

@ -385,14 +385,14 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Tuned PID values using M303 // Tuned PID values using M303
#define DEFAULT_Kp 19.18 #define DEFAULT_Kp 19.18
#define DEFAULT_Ki 1.36 #define DEFAULT_Ki 1.36
#define DEFAULT_Kd 67.42 #define DEFAULT_Kd 67.42
// BQ firmware stock PID values // BQ firmware stock PID values
//#define DEFAULT_Kp 10.7 //#define DEFAULT_Kp 10.7
//#define DEFAULT_Ki 0.45 //#define DEFAULT_Ki 0.45
//#define DEFAULT_Kd 3 //#define DEFAULT_Kd 3
#endif // PIDTEMP #endif // PIDTEMP
@ -424,15 +424,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

18
Marlin/src/config/examples/BQ/WITBOX/Configuration.h
Unescape Escape View File

@ -377,9 +377,9 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Witbox // Witbox
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
#endif // PIDTEMP #endif // PIDTEMP
@ -411,15 +411,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/Cartesio/Configuration.h
Unescape Escape View File

@ -380,19 +380,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Cartesio extruderV6 40W Normal // Cartesio extruderV6 40W Normal
#define DEFAULT_Kp 18 #define DEFAULT_Kp 18
#define DEFAULT_Ki 1 #define DEFAULT_Ki 1
#define DEFAULT_Kd 100 #define DEFAULT_Kd 100
// Cartesio extruderV6 40W Volcano // Cartesio extruderV6 40W Volcano
//#define DEFAULT_Kp 50 //#define DEFAULT_Kp 50
//#define DEFAULT_Ki 9 //#define DEFAULT_Ki 9
//#define DEFAULT_Kd 70 //#define DEFAULT_Kd 70
// Cartesio extruderV6 40W Cyclops // Cartesio extruderV6 40W Cyclops
//#define DEFAULT_Kp 18 //#define DEFAULT_Kp 18
//#define DEFAULT_Ki 1 //#define DEFAULT_Ki 1
//#define DEFAULT_Kd 100 //#define DEFAULT_Kd 100
#endif // PIDTEMP #endif // PIDTEMP
@ -423,14 +423,14 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port. //#define PID_BED_DEBUG // Sends debug data to the serial port.
//24V 500W silicone heater on to 4mm glass CartesioW //24V 500W silicone heater on to 4mm glass CartesioW
#define DEFAULT_bedKp 390 #define DEFAULT_bedKp 390
#define DEFAULT_bedKi 70 #define DEFAULT_bedKi 70
#define DEFAULT_bedKd 546 #define DEFAULT_bedKd 546
//24V 250W silicone heater on to 4mm glass CartesioM //24V 250W silicone heater on to 4mm glass CartesioM
//#define DEFAULT_bedKp 303 //#define DEFAULT_bedKp 303
//#define DEFAULT_bedKi 42 //#define DEFAULT_bedKi 42
//#define DEFAULT_bedKd 539 //#define DEFAULT_bedKd 539
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

42
Marlin/src/config/examples/Creality/CR-10/Configuration.h
Unescape Escape View File

@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Stock CR-10 tuned for 70C // Stock CR-10 tuned for 70C
#define DEFAULT_Kp 22.57 #define DEFAULT_Kp 22.57
#define DEFAULT_Ki 1.72 #define DEFAULT_Ki 1.72
#define DEFAULT_Kd 73.96 #define DEFAULT_Kd 73.96
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -427,21 +427,21 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port. //#define PID_BED_DEBUG // Sends debug data to the serial port.
//Stock CR-10 Bed Tuned for 70C //Stock CR-10 Bed Tuned for 70C
#define DEFAULT_bedKp 426.68 #define DEFAULT_bedKp 426.68
#define DEFAULT_bedKi 78.92 #define DEFAULT_bedKi 78.92
#define DEFAULT_bedKd 576.71 #define DEFAULT_bedKd 576.71
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/Creality/CR-10S/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

42
Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
Unescape Escape View File

@ -388,24 +388,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Stock CR-10 tuned for 70C // Stock CR-10 tuned for 70C
#define DEFAULT_Kp 22.57 #define DEFAULT_Kp 22.57
#define DEFAULT_Ki 1.72 #define DEFAULT_Ki 1.72
#define DEFAULT_Kd 73.96 #define DEFAULT_Kd 73.96
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -436,21 +436,21 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port. //#define PID_BED_DEBUG // Sends debug data to the serial port.
//Stock CR-10 Bed Tuned for 70C //Stock CR-10 Bed Tuned for 70C
#define DEFAULT_bedKp 426.68 #define DEFAULT_bedKp 426.68
#define DEFAULT_bedKi 78.92 #define DEFAULT_bedKi 78.92
#define DEFAULT_bedKd 576.71 #define DEFAULT_bedKd 576.71
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

36
Marlin/src/config/examples/Creality/Ender-2/Configuration.h
Unescape Escape View File

@ -378,24 +378,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Creality Ender // Creality Ender
#define DEFAULT_Kp 21.73 #define DEFAULT_Kp 21.73
#define DEFAULT_Ki 1.54 #define DEFAULT_Ki 1.54
#define DEFAULT_Kd 76.55 #define DEFAULT_Kd 76.55
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -427,15 +427,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

42
Marlin/src/config/examples/Creality/Ender-4/Configuration.h
Unescape Escape View File

@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ender-4 // Ender-4
#define DEFAULT_Kp 22.57 #define DEFAULT_Kp 22.57
#define DEFAULT_Ki 1.72 #define DEFAULT_Ki 1.72
#define DEFAULT_Kd 73.96 #define DEFAULT_Kd 73.96
// Ultimaker // Ultimaker
// #define DEFAULT_Kp 22.2 // #define DEFAULT_Kp 22.2
// #define DEFAULT_Ki 1.08 // #define DEFAULT_Ki 1.08
// #define DEFAULT_Kd 114 // #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -427,21 +427,21 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port. //#define PID_BED_DEBUG // Sends debug data to the serial port.
// Ender-4 // Ender-4
#define DEFAULT_bedKp 426.68 #define DEFAULT_bedKp 426.68
#define DEFAULT_bedKi 78.92 #define DEFAULT_bedKi 78.92
#define DEFAULT_bedKd 576.71 #define DEFAULT_bedKd 576.71
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

36
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
Unescape Escape View File

@ -380,24 +380,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// FolgerTech i3-2020 // FolgerTech i3-2020
#define DEFAULT_Kp 11.50 #define DEFAULT_Kp 11.50
#define DEFAULT_Ki 0.50 #define DEFAULT_Ki 0.50
#define DEFAULT_Kd 60.00 #define DEFAULT_Kd 60.00
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -429,15 +429,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 250.0 #define DEFAULT_bedKp 250.0
#define DEFAULT_bedKi 18.0 #define DEFAULT_bedKi 18.0
#define DEFAULT_bedKd 950.0 #define DEFAULT_bedKd 950.0
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

48
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
Unescape Escape View File

@ -377,31 +377,31 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Geeetech MK8 Extruder // Geeetech MK8 Extruder
#define DEFAULT_Kp 12.33 #define DEFAULT_Kp 12.33
#define DEFAULT_Ki 0.51 #define DEFAULT_Ki 0.51
#define DEFAULT_Kd 74.50 #define DEFAULT_Kd 74.50
// CTC MK8 Extruder // CTC MK8 Extruder
//#define DEFAULT_Kp 19.86 //#define DEFAULT_Kp 19.86
//#define DEFAULT_Ki 1.0 //#define DEFAULT_Ki 1.0
//#define DEFAULT_Kd 98.83 //#define DEFAULT_Kd 98.83
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -432,21 +432,21 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port. //#define PID_BED_DEBUG // Sends debug data to the serial port.
//12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X) //12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X)
#define DEFAULT_bedKp 234.88 #define DEFAULT_bedKp 234.88
#define DEFAULT_bedKi 42.79 #define DEFAULT_bedKi 42.79
#define DEFAULT_bedKd 322.28 #define DEFAULT_bedKd 322.28
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

48
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
Unescape Escape View File

@ -377,31 +377,31 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Geeetech MK8 Extruder // Geeetech MK8 Extruder
#define DEFAULT_Kp 12.33 #define DEFAULT_Kp 12.33
#define DEFAULT_Ki 0.51 #define DEFAULT_Ki 0.51
#define DEFAULT_Kd 74.50 #define DEFAULT_Kd 74.50
// CTC MK8 Extruder // CTC MK8 Extruder
//#define DEFAULT_Kp 19.86 //#define DEFAULT_Kp 19.86
//#define DEFAULT_Ki 1.0 //#define DEFAULT_Ki 1.0
//#define DEFAULT_Kd 98.83 //#define DEFAULT_Kd 98.83
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -432,21 +432,21 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port. //#define PID_BED_DEBUG // Sends debug data to the serial port.
//12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X) //12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X)
#define DEFAULT_bedKp 234.88 #define DEFAULT_bedKp 234.88
#define DEFAULT_bedKi 42.79 #define DEFAULT_bedKi 42.79
#define DEFAULT_bedKd 322.28 #define DEFAULT_bedKd 322.28
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

48
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
Unescape Escape View File

@ -377,31 +377,31 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Geeetech MK8 Extruder // Geeetech MK8 Extruder
#define DEFAULT_Kp 12.33 #define DEFAULT_Kp 12.33
#define DEFAULT_Ki 0.51 #define DEFAULT_Ki 0.51
#define DEFAULT_Kd 74.50 #define DEFAULT_Kd 74.50
// CTC MK8 Extruder // CTC MK8 Extruder
//#define DEFAULT_Kp 19.86 //#define DEFAULT_Kp 19.86
//#define DEFAULT_Ki 1.0 //#define DEFAULT_Ki 1.0
//#define DEFAULT_Kd 98.83 //#define DEFAULT_Kd 98.83
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -432,21 +432,21 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port. //#define PID_BED_DEBUG // Sends debug data to the serial port.
//12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X) //12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X)
#define DEFAULT_bedKp 234.88 #define DEFAULT_bedKp 234.88
#define DEFAULT_bedKi 42.79 #define DEFAULT_bedKi 42.79
#define DEFAULT_bedKd 322.28 #define DEFAULT_bedKd 322.28
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

36
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
Unescape Escape View File

@ -379,23 +379,23 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#define DEFAULT_Kp 213.2 #define DEFAULT_Kp 213.2
#define DEFAULT_Ki 1.54 #define DEFAULT_Ki 1.54
#define DEFAULT_Kd 765 #define DEFAULT_Kd 765
#endif // PIDTEMP #endif // PIDTEMP
@ -427,15 +427,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

36
Marlin/src/config/examples/JGAurora/A5/Configuration.h
Unescape Escape View File

@ -384,24 +384,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
// JGAurora A5 (tuned at 210C) // JGAurora A5 (tuned at 210C)
#define DEFAULT_Kp 35.3//22.2 #define DEFAULT_Kp 35.3//22.2
#define DEFAULT_Ki 4.35//1.08 #define DEFAULT_Ki 4.35//1.08
#define DEFAULT_Kd 71.57//114 #define DEFAULT_Kd 71.57//114
#endif // PIDTEMP #endif // PIDTEMP
@ -435,15 +435,15 @@
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
// JGAurora A5 (tuned at 70C) // JGAurora A5 (tuned at 70C)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/MakerParts/Configuration.h
Unescape Escape View File

@ -399,19 +399,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -443,15 +443,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/Malyan/M150/Configuration.h
Unescape Escape View File

@ -387,19 +387,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Malyan M150 example // Malyan M150 example
#define DEFAULT_Kp 29 #define DEFAULT_Kp 29
#define DEFAULT_Ki 2 #define DEFAULT_Ki 2
#define DEFAULT_Kd 97 #define DEFAULT_Kd 97
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -431,15 +431,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

18
Marlin/src/config/examples/Malyan/M200/Configuration.h
Unescape Escape View File

@ -383,14 +383,14 @@
#define DEFAULT_Ki 2.74 #define DEFAULT_Ki 2.74
#define DEFAULT_Kd 62.35 #define DEFAULT_Kd 62.35
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -428,9 +428,9 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/Mks/Sbase/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

24
Marlin/src/config/examples/RigidBot/Configuration.h
Unescape Escape View File

@ -382,19 +382,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Rigidbot hotend // Rigidbot hotend
#define DEFAULT_Kp 16.17 #define DEFAULT_Kp 16.17
#define DEFAULT_Ki 0.85 #define DEFAULT_Ki 0.85
#define DEFAULT_Kd 76.55 #define DEFAULT_Kd 76.55
// Base DGlass3D/E3Dv6 hotend // Base DGlass3D/E3Dv6 hotend
//#define DEFAULT_Kp 10 //#define DEFAULT_Kp 10
//#define DEFAULT_Ki 0.85 //#define DEFAULT_Ki 0.85
//#define DEFAULT_Kd 245 //#define DEFAULT_Kd 245
// E3D w/ rigidbot cartridge // E3D w/ rigidbot cartridge
//#define DEFAULT_Kp 16.30 //#define DEFAULT_Kp 16.30
//#define DEFAULT_Ki 0.95 //#define DEFAULT_Ki 0.95
//#define DEFAULT_Kd 69.69 //#define DEFAULT_Kd 69.69
#endif // PIDTEMP #endif // PIDTEMP
@ -425,9 +425,9 @@
//#define PID_BED_DEBUG // Sends debug data to the serial port. //#define PID_BED_DEBUG // Sends debug data to the serial port.
//RigidBot, from pid autotune //RigidBot, from pid autotune
#define DEFAULT_bedKp 355 #define DEFAULT_bedKp 355
#define DEFAULT_bedKi 66.5 #define DEFAULT_bedKi 66.5
#define DEFAULT_bedKd 480 #define DEFAULT_bedKd 480
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

12
Marlin/src/config/examples/SCARA/Configuration.h
Unescape Escape View File

@ -406,9 +406,9 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Merlin Hotend: From Autotune // Merlin Hotend: From Autotune
#define DEFAULT_Kp 24.5 #define DEFAULT_Kp 24.5
#define DEFAULT_Ki 1.72 #define DEFAULT_Ki 1.72
#define DEFAULT_Kd 87.73 #define DEFAULT_Kd 87.73
#endif // PIDTEMP #endif // PIDTEMP
@ -440,9 +440,9 @@
//12v Heatbed Mk3 12V in parallel //12v Heatbed Mk3 12V in parallel
//from pidautotune //from pidautotune
#define DEFAULT_bedKp 630.14 #define DEFAULT_bedKp 630.14
#define DEFAULT_bedKi 121.71 #define DEFAULT_bedKi 121.71
#define DEFAULT_bedKd 815.64 #define DEFAULT_bedKd 815.64
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/STM32F10/Configuration.h
Unescape Escape View File

@ -380,19 +380,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -424,15 +424,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/Sanguinololu/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/TheBorg/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 18.21 #define DEFAULT_Kp 18.21
#define DEFAULT_Ki 1.42 #define DEFAULT_Ki 1.42
#define DEFAULT_Kd 58.34 #define DEFAULT_Kd 58.34
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 554.16 #define DEFAULT_bedKp 554.16
#define DEFAULT_bedKi 64.07 #define DEFAULT_bedKi 64.07
#define DEFAULT_bedKd 1198.25 #define DEFAULT_bedKd 1198.25
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

54
Marlin/src/config/examples/TinyBoy2/Configuration.h
Unescape Escape View File

@ -406,30 +406,30 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
// TinyBoy2 Extruder - calculated with PID Autotune and tested // TinyBoy2 Extruder - calculated with PID Autotune and tested
// "M303 E0 C8 S200" // "M303 E0 C8 S200"
//#define DEFAULT_Kp 25.63 //#define DEFAULT_Kp 25.63
//#define DEFAULT_Ki 2.66 //#define DEFAULT_Ki 2.66
//#define DEFAULT_Kd 61.73 //#define DEFAULT_Kd 61.73
// TinyBoy2 Extruder - same, but with fan @ 25% duty // TinyBoy2 Extruder - same, but with fan @ 25% duty
#define DEFAULT_Kp 26.15 #define DEFAULT_Kp 26.15
#define DEFAULT_Ki 2.71 #define DEFAULT_Ki 2.71
#define DEFAULT_Kd 63.02 #define DEFAULT_Kd 63.02
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
@ -460,29 +460,29 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
// TinyBoy2 heatbed - calculated with PID Autotune and tested // TinyBoy2 heatbed - calculated with PID Autotune and tested
// "M303 E-1 C8 S75" // "M303 E-1 C8 S75"
//#define DEFAULT_bedKp 421.80 //#define DEFAULT_bedKp 421.80
//#define DEFAULT_bedKi 82.51 //#define DEFAULT_bedKi 82.51
//#define DEFAULT_bedKd 539.06 //#define DEFAULT_bedKd 539.06
// TinyBoy2 heatbed - same, but with fan @ 25% duty // TinyBoy2 heatbed - same, but with fan @ 25% duty
// "M303 E-1 C8 S75" // "M303 E-1 C8 S75"
#define DEFAULT_bedKp 267.54 #define DEFAULT_bedKp 267.54
#define DEFAULT_bedKi 52.34 #define DEFAULT_bedKi 52.34
#define DEFAULT_bedKd 341.92 #define DEFAULT_bedKd 341.92
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/Tronxy/X1/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Tronxy X1 // Tronxy X1
#define DEFAULT_Kp 16.20 #define DEFAULT_Kp 16.20
#define DEFAULT_Ki 1.11 #define DEFAULT_Ki 1.11
#define DEFAULT_Kd 59.06 #define DEFAULT_Kd 59.06
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/Tronxy/X5S/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

42
Marlin/src/config/examples/Tronxy/XY100/Configuration.h
Unescape Escape View File

@ -379,30 +379,30 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
// #define DEFAULT_Kp 22.2 // #define DEFAULT_Kp 22.2
// #define DEFAULT_Ki 1.08 // #define DEFAULT_Ki 1.08
// #define DEFAULT_Kd 114 // #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
// TronXY XY-100 Standard Extruder at 210 Degree Celsius and 100% Fan // TronXY XY-100 Standard Extruder at 210 Degree Celsius and 100% Fan
// (measured after M106 S255 with M303 E0 S210 C8) // (measured after M106 S255 with M303 E0 S210 C8)
// #define DEFAULT_Kp 20.32 // #define DEFAULT_Kp 20.32
// #define DEFAULT_Ki 1.18 // #define DEFAULT_Ki 1.18
// #define DEFAULT_Kd 87.80 // #define DEFAULT_Kd 87.80
// TronXY XY-100 Standard Extruder, from original firmware // TronXY XY-100 Standard Extruder, from original firmware
#define DEFAULT_Kp 7.0000 #define DEFAULT_Kp 7.0000
#define DEFAULT_Ki 2.0000 #define DEFAULT_Ki 2.0000
#define DEFAULT_Kd 40.0000 #define DEFAULT_Kd 40.0000
#endif // PIDTEMP #endif // PIDTEMP
@ -434,15 +434,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

42
Marlin/src/config/examples/Velleman/K8200/Configuration.h
Unescape Escape View File

@ -399,24 +399,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
// Vellemann K8200 Extruder - calculated with PID Autotune and tested // Vellemann K8200 Extruder - calculated with PID Autotune and tested
#define DEFAULT_Kp 24.29 #define DEFAULT_Kp 24.29
#define DEFAULT_Ki 1.58 #define DEFAULT_Ki 1.58
#define DEFAULT_Kd 93.51 #define DEFAULT_Kd 93.51
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
@ -447,23 +447,23 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
// Vellemann K8200 PCB heatbed with standard PCU at 60 degreesC - calculated with PID Autotune and tested // Vellemann K8200 PCB heatbed with standard PCU at 60 degreesC - calculated with PID Autotune and tested
// from pidautotune // from pidautotune
#define DEFAULT_bedKp 341.88 #define DEFAULT_bedKp 341.88
#define DEFAULT_bedKi 25.32 #define DEFAULT_bedKi 25.32
#define DEFAULT_bedKd 1153.89 #define DEFAULT_bedKd 1153.89
#endif // PIDTEMPBED #endif // PIDTEMPBED
// @section extruder // @section extruder

30
Marlin/src/config/examples/Velleman/K8400/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
#define DEFAULT_Kp 63.0 #define DEFAULT_Kp 63.0
#define DEFAULT_Ki 2.25 #define DEFAULT_Ki 2.25
#define DEFAULT_Kd 440 #define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
#define DEFAULT_Kp 63.0 #define DEFAULT_Kp 63.0
#define DEFAULT_Ki 2.25 #define DEFAULT_Ki 2.25
#define DEFAULT_Kd 440 #define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

42
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
Unescape Escape View File

@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
// Duplicator 6 // Duplicator 6
#define DEFAULT_Kp 9.12 #define DEFAULT_Kp 9.12
#define DEFAULT_Ki 0.41 #define DEFAULT_Ki 0.41
#define DEFAULT_Kd 50.98 #define DEFAULT_Kd 50.98
#endif // PIDTEMP #endif // PIDTEMP
@ -428,20 +428,20 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
// #define DEFAULT_bedKp 10.00 // #define DEFAULT_bedKp 10.00
// #define DEFAULT_bedKi .023 // #define DEFAULT_bedKi .023
// #define DEFAULT_bedKd 305.4 // #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// Duplicator 6 // Duplicator 6
#define DEFAULT_bedKp 124.55 #define DEFAULT_bedKp 124.55
#define DEFAULT_bedKi 23.46 #define DEFAULT_bedKi 23.46
#define DEFAULT_bedKd 165.29 #define DEFAULT_bedKd 165.29
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/adafruit/ST7565/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

42
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
Unescape Escape View File

@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
//E3D with 30MM fan //E3D with 30MM fan
#define DEFAULT_Kp 24.77 #define DEFAULT_Kp 24.77
#define DEFAULT_Ki 1.84 #define DEFAULT_Ki 1.84
#define DEFAULT_Kd 83.61 #define DEFAULT_Kd 83.61
#endif // PIDTEMP #endif // PIDTEMP
@ -428,20 +428,20 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
//D-force //D-force
#define DEFAULT_bedKp 22.97 #define DEFAULT_bedKp 22.97
#define DEFAULT_bedKi 3.76 #define DEFAULT_bedKi 3.76
#define DEFAULT_bedKd 29.2 #define DEFAULT_bedKd 29.2
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

42
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
Unescape Escape View File

@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
//E3D with 30MM fan //E3D with 30MM fan
#define DEFAULT_Kp 24.77 #define DEFAULT_Kp 24.77
#define DEFAULT_Ki 1.84 #define DEFAULT_Ki 1.84
#define DEFAULT_Kd 83.61 #define DEFAULT_Kd 83.61
#endif // PIDTEMP #endif // PIDTEMP
@ -428,20 +428,20 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
//D-force //D-force
#define DEFAULT_bedKp 22.97 #define DEFAULT_bedKp 22.97
#define DEFAULT_bedKi 3.76 #define DEFAULT_bedKi 3.76
#define DEFAULT_bedKd 29.2 #define DEFAULT_bedKd 29.2
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

42
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
Unescape Escape View File

@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
//E3D with 30MM fan //E3D with 30MM fan
#define DEFAULT_Kp 24.77 #define DEFAULT_Kp 24.77
#define DEFAULT_Ki 1.84 #define DEFAULT_Ki 1.84
#define DEFAULT_Kd 83.61 #define DEFAULT_Kd 83.61
#endif // PIDTEMP #endif // PIDTEMP
@ -428,20 +428,20 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
//D-force //D-force
#define DEFAULT_bedKp 22.97 #define DEFAULT_bedKp 22.97
#define DEFAULT_bedKi 3.76 #define DEFAULT_bedKi 3.76
#define DEFAULT_bedKd 29.2 #define DEFAULT_bedKd 29.2
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

42
Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
Unescape Escape View File

@ -384,24 +384,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
// E3D-v6 // E3D-v6
#define DEFAULT_Kp 18.55 #define DEFAULT_Kp 18.55
#define DEFAULT_Ki 2.71 #define DEFAULT_Ki 2.71
#define DEFAULT_Kd 47.69 #define DEFAULT_Kd 47.69
#endif // PIDTEMP #endif // PIDTEMP
@ -433,20 +433,20 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
//#define DEFAULT_bedKp 10.00 //#define DEFAULT_bedKp 10.00
//#define DEFAULT_bedKi .023 //#define DEFAULT_bedKi .023
//#define DEFAULT_bedKd 305.4 //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
//HatchBox Alpha //HatchBox Alpha
#define DEFAULT_bedKp 72.11 #define DEFAULT_bedKp 72.11
#define DEFAULT_bedKi 7.1 #define DEFAULT_bedKi 7.1
#define DEFAULT_bedKd 488.31 #define DEFAULT_bedKd 488.31
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/delta/generic/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/delta/kossel_mini/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -423,15 +423,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

12
Marlin/src/config/examples/delta/kossel_pro/Configuration.h
Unescape Escape View File

@ -381,9 +381,9 @@
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Kossel Pro // Kossel Pro
#define DEFAULT_Kp 19.30 #define DEFAULT_Kp 19.30
#define DEFAULT_Ki 3.51 #define DEFAULT_Ki 3.51
#define DEFAULT_Kd 26.56 #define DEFAULT_Kd 26.56
#endif // PIDTEMP #endif // PIDTEMP
@ -415,9 +415,9 @@
//Kossel Pro heated bed plate with borosilicate glass //Kossel Pro heated bed plate with borosilicate glass
//from pidautotune (M303 E-1 S60 C8) //from pidautotune (M303 E-1 S60 C8)
#define DEFAULT_bedKp 370.25 #define DEFAULT_bedKp 370.25
#define DEFAULT_bedKi 62.77 #define DEFAULT_bedKi 62.77
#define DEFAULT_bedKd 545.98 #define DEFAULT_bedKd 545.98
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

24
Marlin/src/config/examples/delta/kossel_xl/Configuration.h
Unescape Escape View File

@ -388,14 +388,14 @@
//#define DEFAULT_Kd 85.30 //#define DEFAULT_Kd 85.30
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -427,15 +427,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 15.00 #define DEFAULT_bedKp 15.00
#define DEFAULT_bedKi .04 #define DEFAULT_bedKi .04
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

36
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
Unescape Escape View File

@ -387,24 +387,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// gMax J-Head // gMax J-Head
#define DEFAULT_Kp 15.35 #define DEFAULT_Kp 15.35
#define DEFAULT_Ki 0.85 #define DEFAULT_Ki 0.85
#define DEFAULT_Kd 69.45 #define DEFAULT_Kd 69.45
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -436,15 +436,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 135.44 #define DEFAULT_bedKp 135.44
#define DEFAULT_bedKi 24.60 #define DEFAULT_bedKi 24.60
#define DEFAULT_bedKd 186.40 #define DEFAULT_bedKd 186.40
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/makibox/Configuration.h
Unescape Escape View File

@ -379,19 +379,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -426,15 +426,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

30
Marlin/src/config/examples/stm32f103ret6/Configuration.h
Unescape Escape View File

@ -380,19 +380,19 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// Ultimaker // Ultimaker
#define DEFAULT_Kp 22.2 #define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114 #define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -424,15 +424,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

18
Marlin/src/config/examples/tvrrug/Round2/Configuration.h
Unescape Escape View File

@ -378,9 +378,9 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
// J-Head Mk V-B // J-Head Mk V-B
#define DEFAULT_Kp 25.05 #define DEFAULT_Kp 25.05
#define DEFAULT_Ki 2.30 #define DEFAULT_Ki 2.30
#define DEFAULT_Kd 68.15 #define DEFAULT_Kd 68.15
#endif // PIDTEMP #endif // PIDTEMP
@ -412,15 +412,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

36
Marlin/src/config/examples/wt150/Configuration.h
Unescape Escape View File

@ -379,24 +379,24 @@
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
//WT150, based on: M303 E0 S220 C8 //WT150, based on: M303 E0 S220 C8
#define DEFAULT_Kp 22.10 #define DEFAULT_Kp 22.10
#define DEFAULT_Ki 1.10 #define DEFAULT_Ki 1.10
#define DEFAULT_Kd 110.78 #define DEFAULT_Kd 110.78
// Ultimaker // Ultimaker
//#define DEFAULT_Kp 22.2 //#define DEFAULT_Kp 22.2
//#define DEFAULT_Ki 1.08 //#define DEFAULT_Ki 1.08
//#define DEFAULT_Kd 114 //#define DEFAULT_Kd 114
// MakerGear // MakerGear
//#define DEFAULT_Kp 7.0 //#define DEFAULT_Kp 7.0
//#define DEFAULT_Ki 0.1 //#define DEFAULT_Ki 0.1
//#define DEFAULT_Kd 12 //#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
//#define DEFAULT_Kp 63.0 //#define DEFAULT_Kp 63.0
//#define DEFAULT_Ki 2.25 //#define DEFAULT_Ki 2.25
//#define DEFAULT_Kd 440 //#define DEFAULT_Kd 440
#endif // PIDTEMP #endif // PIDTEMP
@ -428,15 +428,15 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00 #define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023 #define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4 #define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune //from pidautotune
//#define DEFAULT_bedKp 97.1 //#define DEFAULT_bedKp 97.1
//#define DEFAULT_bedKi 1.41 //#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16 //#define DEFAULT_bedKd 1675.16
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED #endif // PIDTEMPBED

2
Marlin/src/config/examples/wt150/Configuration_adv.h
Unescape Escape View File

@ -1208,7 +1208,7 @@
* stepperY.interpolate(0); \ * stepperY.interpolate(0); \
* } * }
*/ */
#define TMC_ADV() { } #define TMC_ADV() { }
#endif // TMC2130 || TMC2208 #endif // TMC2130 || TMC2208

18
Marlin/src/module/temperature.cpp
Unescape Escape View File

@ -452,17 +452,17 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS],
#if HAS_PID_FOR_BOTH #if HAS_PID_FOR_BOTH
const char* estring = hotend < 0 ? "bed" : ""; const char* estring = hotend < 0 ? "bed" : "";
SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kp ", workKp); SERIAL_EOL(); SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kp ", workKp); SERIAL_EOL();
SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Ki ", workKi); SERIAL_EOL(); SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Ki ", workKi); SERIAL_EOL();
SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kd ", workKd); SERIAL_EOL(); SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kd ", workKd); SERIAL_EOL();
#elif ENABLED(PIDTEMP) #elif ENABLED(PIDTEMP)
SERIAL_PROTOCOLPAIR("#define DEFAULT_Kp ", workKp); SERIAL_EOL(); SERIAL_PROTOCOLPAIR("#define DEFAULT_Kp ", workKp); SERIAL_EOL();
SERIAL_PROTOCOLPAIR("#define DEFAULT_Ki ", workKi); SERIAL_EOL(); SERIAL_PROTOCOLPAIR("#define DEFAULT_Ki ", workKi); SERIAL_EOL();
SERIAL_PROTOCOLPAIR("#define DEFAULT_Kd ", workKd); SERIAL_EOL(); SERIAL_PROTOCOLPAIR("#define DEFAULT_Kd ", workKd); SERIAL_EOL();
#else #else
SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKp ", workKp); SERIAL_EOL(); SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKp ", workKp); SERIAL_EOL();
SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKi ", workKi); SERIAL_EOL(); SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKi ", workKi); SERIAL_EOL();
SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKd ", workKd); SERIAL_EOL(); SERIAL_PROTOCOLPAIR("#define DEFAULT_bedKd ", workKd); SERIAL_EOL();
#endif #endif
#define _SET_BED_PID() do { \ #define _SET_BED_PID() do { \

2
Marlin/src/module/tool_change.cpp
Unescape Escape View File

@ -503,7 +503,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#else #else
constexpr bool safe_to_move = true; constexpr bool safe_to_move = true;
#endif #endif
// Move to the "old position" (move the extruder into place) // Move to the "old position" (move the extruder into place)
#if ENABLED(SWITCHING_NOZZLE) #if ENABLED(SWITCHING_NOZZLE)
destination[Z_AXIS] += z_diff; // Include the Z restore with the "move back" destination[Z_AXIS] += z_diff; // Include the Z restore with the "move back"

2
Marlin/src/pins/pins_AZTEEG_X3_PRO.h
Unescape Escape View File

@ -140,7 +140,7 @@
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
#define SD_DETECT_PIN 49 // For easy adapter board #define SD_DETECT_PIN 49 // For easy adapter board
#undef BEEPER_PIN #undef BEEPER_PIN
#define BEEPER_PIN 12 // 33 isn't physically available to the LCD display #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display
#else #else
#define STAT_LED_RED_PIN 32 #define STAT_LED_RED_PIN 32
#define STAT_LED_BLUE_PIN 35 #define STAT_LED_BLUE_PIN 35

Write Preview
Loading…
Cancel
Save