microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Overridable Options - Part 8 (PR#2560)

Browse Source 
Apply `ENABLED` / `DISABLED` macros to stepper-related files.
2.0.x
Scott Lahteine 9 years ago committed by Richard Wackerbarth
parent 0d8989fc14
commit c35fb88094
4 changed files with 149 additions and 149 deletions
Show Stats Download Patch File Download Diff File

86
Marlin/stepper.cpp
Unescape Escape View File

@ -49,7 +49,7 @@ block_t *current_block; // A pointer to the block currently being traced
static unsigned char out_bits = 0; // The next stepping-bits to be output static unsigned char out_bits = 0; // The next stepping-bits to be output
static unsigned int cleaning_buffer_counter; static unsigned int cleaning_buffer_counter;
#ifdef Z_DUAL_ENDSTOPS #if ENABLED(Z_DUAL_ENDSTOPS)
static bool performing_homing = false, static bool performing_homing = false,
locked_z_motor = false, locked_z_motor = false,
locked_z2_motor = false; locked_z2_motor = false;
@ -59,7 +59,7 @@ static unsigned int cleaning_buffer_counter;
static long counter_x, counter_y, counter_z, counter_e; static long counter_x, counter_y, counter_z, counter_e;
volatile static unsigned long step_events_completed; // The number of step events executed in the current block volatile static unsigned long step_events_completed; // The number of step events executed in the current block
#ifdef ADVANCE #if ENABLED(ADVANCE)
static long advance_rate, advance, final_advance = 0; static long advance_rate, advance, final_advance = 0;
static long old_advance = 0; static long old_advance = 0;
static long e_steps[4]; static long e_steps[4];
@ -76,18 +76,18 @@ volatile long endstops_trigsteps[3] = { 0 };
volatile long endstops_stepsTotal, endstops_stepsDone; volatile long endstops_stepsTotal, endstops_stepsDone;
static volatile char endstop_hit_bits = 0; // use X_MIN, Y_MIN, Z_MIN and Z_PROBE as BIT value static volatile char endstop_hit_bits = 0; // use X_MIN, Y_MIN, Z_MIN and Z_PROBE as BIT value
#ifndef Z_DUAL_ENDSTOPS #if DISABLED(Z_DUAL_ENDSTOPS)
static byte static byte
#else #else
static uint16_t static uint16_t
#endif #endif
old_endstop_bits = 0; // use X_MIN, X_MAX... Z_MAX, Z_PROBE, Z2_MIN, Z2_MAX old_endstop_bits = 0; // use X_MIN, X_MAX... Z_MAX, Z_PROBE, Z2_MIN, Z2_MAX
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
bool abort_on_endstop_hit = false; bool abort_on_endstop_hit = false;
#endif #endif
#ifdef MOTOR_CURRENT_PWM_XY_PIN #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
int motor_current_setting[3] = DEFAULT_PWM_MOTOR_CURRENT; int motor_current_setting[3] = DEFAULT_PWM_MOTOR_CURRENT;
#endif #endif
@ -101,7 +101,7 @@ volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 };
//================================ functions ================================ //================================ functions ================================
//=========================================================================== //===========================================================================
#ifdef DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE)
#define X_APPLY_DIR(v,ALWAYS) \ #define X_APPLY_DIR(v,ALWAYS) \
if (extruder_duplication_enabled || ALWAYS) { \ if (extruder_duplication_enabled || ALWAYS) { \
X_DIR_WRITE(v); \ X_DIR_WRITE(v); \
@ -123,7 +123,7 @@ volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 };
#define X_APPLY_STEP(v,Q) X_STEP_WRITE(v) #define X_APPLY_STEP(v,Q) X_STEP_WRITE(v)
#endif #endif
#ifdef Y_DUAL_STEPPER_DRIVERS #if ENABLED(Y_DUAL_STEPPER_DRIVERS)
#define Y_APPLY_DIR(v,Q) { Y_DIR_WRITE(v); Y2_DIR_WRITE((v) != INVERT_Y2_VS_Y_DIR); } #define Y_APPLY_DIR(v,Q) { Y_DIR_WRITE(v); Y2_DIR_WRITE((v) != INVERT_Y2_VS_Y_DIR); }
#define Y_APPLY_STEP(v,Q) { Y_STEP_WRITE(v); Y2_STEP_WRITE(v); } #define Y_APPLY_STEP(v,Q) { Y_STEP_WRITE(v); Y2_STEP_WRITE(v); }
#else #else
@ -131,9 +131,9 @@ volatile signed char count_direction[NUM_AXIS] = { 1, 1, 1, 1 };
#define Y_APPLY_STEP(v,Q) Y_STEP_WRITE(v) #define Y_APPLY_STEP(v,Q) Y_STEP_WRITE(v)
#endif #endif
#ifdef Z_DUAL_STEPPER_DRIVERS #if ENABLED(Z_DUAL_STEPPER_DRIVERS)
#define Z_APPLY_DIR(v,Q) { Z_DIR_WRITE(v); Z2_DIR_WRITE(v); } #define Z_APPLY_DIR(v,Q) { Z_DIR_WRITE(v); Z2_DIR_WRITE(v); }
#ifdef Z_DUAL_ENDSTOPS #if ENABLED(Z_DUAL_ENDSTOPS)
#define Z_APPLY_STEP(v,Q) \ #define Z_APPLY_STEP(v,Q) \
if (performing_homing) { \ if (performing_homing) { \
if (Z_HOME_DIR > 0) {\ if (Z_HOME_DIR > 0) {\
@ -263,7 +263,7 @@ void checkHitEndstops() {
SERIAL_ECHOPAIR(" Z:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]); SERIAL_ECHOPAIR(" Z:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z"); LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z");
} }
#ifdef Z_PROBE_ENDSTOP #if ENABLED(Z_PROBE_ENDSTOP)
if (endstop_hit_bits & BIT(Z_PROBE)) { if (endstop_hit_bits & BIT(Z_PROBE)) {
SERIAL_ECHOPAIR(" Z_PROBE:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]); SERIAL_ECHOPAIR(" Z_PROBE:", (float)endstops_trigsteps[Z_AXIS] / axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "ZP"); LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "ZP");
@ -273,7 +273,7 @@ void checkHitEndstops() {
endstops_hit_on_purpose(); endstops_hit_on_purpose();
#if defined(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && defined(SDSUPPORT) #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT)
if (abort_on_endstop_hit) { if (abort_on_endstop_hit) {
card.sdprinting = false; card.sdprinting = false;
card.closefile(); card.closefile();
@ -556,7 +556,7 @@ void set_stepper_direction() {
count_direction[Z_AXIS] = 1; count_direction[Z_AXIS] = 1;
} }
#ifndef ADVANCE #if DISABLED(ADVANCE)
if (TEST(out_bits, E_AXIS)) { if (TEST(out_bits, E_AXIS)) {
REV_E_DIR(); REV_E_DIR();
count_direction[E_AXIS] = -1; count_direction[E_AXIS] = -1;
@ -577,7 +577,7 @@ FORCE_INLINE void trapezoid_generator_reset() {
set_stepper_direction(); set_stepper_direction();
} }
#ifdef ADVANCE #if ENABLED(ADVANCE)
advance = current_block->initial_advance; advance = current_block->initial_advance;
final_advance = current_block->final_advance; final_advance = current_block->final_advance;
// Do E steps + advance steps // Do E steps + advance steps
@ -630,7 +630,7 @@ ISR(TIMER1_COMPA_vect) {
counter_y = counter_z = counter_e = counter_x; counter_y = counter_z = counter_e = counter_x;
step_events_completed = 0; step_events_completed = 0;
#ifdef Z_LATE_ENABLE #if ENABLED(Z_LATE_ENABLE)
if (current_block->steps[Z_AXIS] > 0) { if (current_block->steps[Z_AXIS] > 0) {
enable_z(); enable_z();
OCR1A = 2000; //1ms wait OCR1A = 2000; //1ms wait
@ -638,7 +638,7 @@ ISR(TIMER1_COMPA_vect) {
} }
#endif #endif
// #ifdef ADVANCE // #if ENABLED(ADVANCE)
// e_steps[current_block->active_extruder] = 0; // e_steps[current_block->active_extruder] = 0;
// #endif // #endif
} }
@ -658,7 +658,7 @@ ISR(TIMER1_COMPA_vect) {
MSerial.checkRx(); // Check for serial chars. MSerial.checkRx(); // Check for serial chars.
#endif #endif
#ifdef ADVANCE #if ENABLED(ADVANCE)
counter_e += current_block->steps[E_AXIS]; counter_e += current_block->steps[E_AXIS];
if (counter_e > 0) { if (counter_e > 0) {
counter_e -= current_block->step_event_count; counter_e -= current_block->step_event_count;
@ -677,7 +677,7 @@ ISR(TIMER1_COMPA_vect) {
STEP_ADD(x,X); STEP_ADD(x,X);
STEP_ADD(y,Y); STEP_ADD(y,Y);
STEP_ADD(z,Z); STEP_ADD(z,Z);
#ifndef ADVANCE #if DISABLED(ADVANCE)
STEP_ADD(e,E); STEP_ADD(e,E);
#endif #endif
@ -691,7 +691,7 @@ ISR(TIMER1_COMPA_vect) {
STEP_IF_COUNTER(x, X); STEP_IF_COUNTER(x, X);
STEP_IF_COUNTER(y, Y); STEP_IF_COUNTER(y, Y);
STEP_IF_COUNTER(z, Z); STEP_IF_COUNTER(z, Z);
#ifndef ADVANCE #if DISABLED(ADVANCE)
STEP_IF_COUNTER(e, E); STEP_IF_COUNTER(e, E);
#endif #endif
@ -714,7 +714,7 @@ ISR(TIMER1_COMPA_vect) {
timer = calc_timer(acc_step_rate); timer = calc_timer(acc_step_rate);
OCR1A = timer; OCR1A = timer;
acceleration_time += timer; acceleration_time += timer;
#ifdef ADVANCE #if ENABLED(ADVANCE)
for(int8_t i=0; i < step_loops; i++) { for(int8_t i=0; i < step_loops; i++) {
advance += advance_rate; advance += advance_rate;
} }
@ -743,7 +743,7 @@ ISR(TIMER1_COMPA_vect) {
timer = calc_timer(step_rate); timer = calc_timer(step_rate);
OCR1A = timer; OCR1A = timer;
deceleration_time += timer; deceleration_time += timer;
#ifdef ADVANCE #if ENABLED(ADVANCE)
for(int8_t i=0; i < step_loops; i++) { for(int8_t i=0; i < step_loops; i++) {
advance -= advance_rate; advance -= advance_rate;
} }
@ -767,7 +767,7 @@ ISR(TIMER1_COMPA_vect) {
} }
} }
#ifdef ADVANCE #if ENABLED(ADVANCE)
unsigned char old_OCR0A; unsigned char old_OCR0A;
// Timer interrupt for E. e_steps is set in the main routine; // Timer interrupt for E. e_steps is set in the main routine;
// Timer 0 is shared with millies // Timer 0 is shared with millies
@ -845,11 +845,11 @@ void st_init() {
microstep_init(); //Initialize Microstepping Pins microstep_init(); //Initialize Microstepping Pins
// initialise TMC Steppers // initialise TMC Steppers
#ifdef HAVE_TMCDRIVER #if ENABLED(HAVE_TMCDRIVER)
tmc_init(); tmc_init();
#endif #endif
// initialise L6470 Steppers // initialise L6470 Steppers
#ifdef HAVE_L6470DRIVER #if ENABLED(HAVE_L6470DRIVER)
L6470_init(); L6470_init();
#endif #endif
@ -862,13 +862,13 @@ void st_init() {
#endif #endif
#if HAS_Y_DIR #if HAS_Y_DIR
Y_DIR_INIT; Y_DIR_INIT;
#if defined(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_DIR #if ENABLED(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_DIR
Y2_DIR_INIT; Y2_DIR_INIT;
#endif #endif
#endif #endif
#if HAS_Z_DIR #if HAS_Z_DIR
Z_DIR_INIT; Z_DIR_INIT;
#if defined(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_DIR #if ENABLED(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_DIR
Z2_DIR_INIT; Z2_DIR_INIT;
#endif #endif
#endif #endif
@ -899,7 +899,7 @@ void st_init() {
Y_ENABLE_INIT; Y_ENABLE_INIT;
if (!Y_ENABLE_ON) Y_ENABLE_WRITE(HIGH); if (!Y_ENABLE_ON) Y_ENABLE_WRITE(HIGH);
#if defined(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_ENABLE #if ENABLED(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_ENABLE
Y2_ENABLE_INIT; Y2_ENABLE_INIT;
if (!Y_ENABLE_ON) Y2_ENABLE_WRITE(HIGH); if (!Y_ENABLE_ON) Y2_ENABLE_WRITE(HIGH);
#endif #endif
@ -908,7 +908,7 @@ void st_init() {
Z_ENABLE_INIT; Z_ENABLE_INIT;
if (!Z_ENABLE_ON) Z_ENABLE_WRITE(HIGH); if (!Z_ENABLE_ON) Z_ENABLE_WRITE(HIGH);
#if defined(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_ENABLE #if ENABLED(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_ENABLE
Z2_ENABLE_INIT; Z2_ENABLE_INIT;
if (!Z_ENABLE_ON) Z2_ENABLE_WRITE(HIGH); if (!Z_ENABLE_ON) Z2_ENABLE_WRITE(HIGH);
#endif #endif
@ -934,56 +934,56 @@ void st_init() {
#if HAS_X_MIN #if HAS_X_MIN
SET_INPUT(X_MIN_PIN); SET_INPUT(X_MIN_PIN);
#ifdef ENDSTOPPULLUP_XMIN #if ENABLED(ENDSTOPPULLUP_XMIN)
WRITE(X_MIN_PIN,HIGH); WRITE(X_MIN_PIN,HIGH);
#endif #endif
#endif #endif
#if HAS_Y_MIN #if HAS_Y_MIN
SET_INPUT(Y_MIN_PIN); SET_INPUT(Y_MIN_PIN);
#ifdef ENDSTOPPULLUP_YMIN #if ENABLED(ENDSTOPPULLUP_YMIN)
WRITE(Y_MIN_PIN,HIGH); WRITE(Y_MIN_PIN,HIGH);
#endif #endif
#endif #endif
#if HAS_Z_MIN #if HAS_Z_MIN
SET_INPUT(Z_MIN_PIN); SET_INPUT(Z_MIN_PIN);
#ifdef ENDSTOPPULLUP_ZMIN #if ENABLED(ENDSTOPPULLUP_ZMIN)
WRITE(Z_MIN_PIN,HIGH); WRITE(Z_MIN_PIN,HIGH);
#endif #endif
#endif #endif
#if HAS_X_MAX #if HAS_X_MAX
SET_INPUT(X_MAX_PIN); SET_INPUT(X_MAX_PIN);
#ifdef ENDSTOPPULLUP_XMAX #if ENABLED(ENDSTOPPULLUP_XMAX)
WRITE(X_MAX_PIN,HIGH); WRITE(X_MAX_PIN,HIGH);
#endif #endif
#endif #endif
#if HAS_Y_MAX #if HAS_Y_MAX
SET_INPUT(Y_MAX_PIN); SET_INPUT(Y_MAX_PIN);
#ifdef ENDSTOPPULLUP_YMAX #if ENABLED(ENDSTOPPULLUP_YMAX)
WRITE(Y_MAX_PIN,HIGH); WRITE(Y_MAX_PIN,HIGH);
#endif #endif
#endif #endif
#if HAS_Z_MAX #if HAS_Z_MAX
SET_INPUT(Z_MAX_PIN); SET_INPUT(Z_MAX_PIN);
#ifdef ENDSTOPPULLUP_ZMAX #if ENABLED(ENDSTOPPULLUP_ZMAX)
WRITE(Z_MAX_PIN,HIGH); WRITE(Z_MAX_PIN,HIGH);
#endif #endif
#endif #endif
#if HAS_Z2_MAX #if HAS_Z2_MAX
SET_INPUT(Z2_MAX_PIN); SET_INPUT(Z2_MAX_PIN);
#ifdef ENDSTOPPULLUP_ZMAX #if ENABLED(ENDSTOPPULLUP_ZMAX)
WRITE(Z2_MAX_PIN,HIGH); WRITE(Z2_MAX_PIN,HIGH);
#endif #endif
#endif #endif
#if (defined(Z_PROBE_PIN) && Z_PROBE_PIN >= 0) && defined(Z_PROBE_ENDSTOP) // Check for Z_PROBE_ENDSTOP so we don't pull a pin high unless it's to be used. #if HAS_Z_PROBE && ENABLED(Z_PROBE_ENDSTOP) // Check for Z_PROBE_ENDSTOP so we don't pull a pin high unless it's to be used.
SET_INPUT(Z_PROBE_PIN); SET_INPUT(Z_PROBE_PIN);
#ifdef ENDSTOPPULLUP_ZPROBE #if ENABLED(ENDSTOPPULLUP_ZPROBE)
WRITE(Z_PROBE_PIN,HIGH); WRITE(Z_PROBE_PIN,HIGH);
#endif #endif
#endif #endif
@ -1007,14 +1007,14 @@ void st_init() {
AXIS_INIT(x, X2, X); AXIS_INIT(x, X2, X);
#endif #endif
#if HAS_Y_STEP #if HAS_Y_STEP
#if defined(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_STEP #if ENABLED(Y_DUAL_STEPPER_DRIVERS) && HAS_Y2_STEP
Y2_STEP_INIT; Y2_STEP_INIT;
Y2_STEP_WRITE(INVERT_Y_STEP_PIN); Y2_STEP_WRITE(INVERT_Y_STEP_PIN);
#endif #endif
AXIS_INIT(y, Y, Y); AXIS_INIT(y, Y, Y);
#endif #endif
#if HAS_Z_STEP #if HAS_Z_STEP
#if defined(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_STEP #if ENABLED(Z_DUAL_STEPPER_DRIVERS) && HAS_Z2_STEP
Z2_STEP_INIT; Z2_STEP_INIT;
Z2_STEP_WRITE(INVERT_Z_STEP_PIN); Z2_STEP_WRITE(INVERT_Z_STEP_PIN);
#endif #endif
@ -1054,7 +1054,7 @@ void st_init() {
TCNT1 = 0; TCNT1 = 0;
ENABLE_STEPPER_DRIVER_INTERRUPT(); ENABLE_STEPPER_DRIVER_INTERRUPT();
#ifdef ADVANCE #if ENABLED(ADVANCE)
#if defined(TCCR0A) && defined(WGM01) #if defined(TCCR0A) && defined(WGM01)
TCCR0A &= ~BIT(WGM01); TCCR0A &= ~BIT(WGM01);
TCCR0A &= ~BIT(WGM00); TCCR0A &= ~BIT(WGM00);
@ -1113,7 +1113,7 @@ void quickStop() {
ENABLE_STEPPER_DRIVER_INTERRUPT(); ENABLE_STEPPER_DRIVER_INTERRUPT();
} }
#ifdef BABYSTEPPING #if ENABLED(BABYSTEPPING)
// MUST ONLY BE CALLED BY AN ISR, // MUST ONLY BE CALLED BY AN ISR,
// No other ISR should ever interrupt this! // No other ISR should ever interrupt this!
@ -1146,7 +1146,7 @@ void quickStop() {
case Z_AXIS: { case Z_AXIS: {
#ifndef DELTA #if DISABLED(DELTA)
BABYSTEP_AXIS(z, Z, BABYSTEP_INVERT_Z); BABYSTEP_AXIS(z, Z, BABYSTEP_INVERT_Z);
@ -1272,7 +1272,7 @@ void microstep_ms(uint8_t driver, int8_t ms1, int8_t ms2) {
case 1: digitalWrite(Y_MS2_PIN, ms2); break; case 1: digitalWrite(Y_MS2_PIN, ms2); break;
case 2: digitalWrite(Z_MS2_PIN, ms2); break; case 2: digitalWrite(Z_MS2_PIN, ms2); break;
case 3: digitalWrite(E0_MS2_PIN, ms2); break; case 3: digitalWrite(E0_MS2_PIN, ms2); break;
#if defined(E1_MS2_PIN) && E1_MS2_PIN >= 0 #if PIN_EXISTS(E1_MS2)
case 4: digitalWrite(E1_MS2_PIN, ms2); break; case 4: digitalWrite(E1_MS2_PIN, ms2); break;
#endif #endif
} }
@ -1309,7 +1309,7 @@ void microstep_readings() {
#endif #endif
} }
#ifdef Z_DUAL_ENDSTOPS #if ENABLED(Z_DUAL_ENDSTOPS)
void In_Homing_Process(bool state) { performing_homing = state; } void In_Homing_Process(bool state) { performing_homing = state; }
void Lock_z_motor(bool state) { locked_z_motor = state; } void Lock_z_motor(bool state) { locked_z_motor = state; }
void Lock_z2_motor(bool state) { locked_z2_motor = state; } void Lock_z2_motor(bool state) { locked_z2_motor = state; }

8
Marlin/stepper.h
Unescape Escape View File

@ -33,7 +33,7 @@
#define NORM_E_DIR() { if(current_block->active_extruder == 2) { E2_DIR_WRITE(!INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { E1_DIR_WRITE(!INVERT_E1_DIR); } else { E0_DIR_WRITE(!INVERT_E0_DIR); }}} #define NORM_E_DIR() { if(current_block->active_extruder == 2) { E2_DIR_WRITE(!INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { E1_DIR_WRITE(!INVERT_E1_DIR); } else { E0_DIR_WRITE(!INVERT_E0_DIR); }}}
#define REV_E_DIR() { if(current_block->active_extruder == 2) { E2_DIR_WRITE(INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { E1_DIR_WRITE(INVERT_E1_DIR); } else { E0_DIR_WRITE(INVERT_E0_DIR); }}} #define REV_E_DIR() { if(current_block->active_extruder == 2) { E2_DIR_WRITE(INVERT_E2_DIR); } else { if(current_block->active_extruder == 1) { E1_DIR_WRITE(INVERT_E1_DIR); } else { E0_DIR_WRITE(INVERT_E0_DIR); }}}
#elif EXTRUDERS > 1 #elif EXTRUDERS > 1
#ifndef DUAL_X_CARRIAGE #if DISABLED(DUAL_X_CARRIAGE)
#define E_STEP_WRITE(v) { if(current_block->active_extruder == 1) { E1_STEP_WRITE(v); } else { E0_STEP_WRITE(v); }} #define E_STEP_WRITE(v) { if(current_block->active_extruder == 1) { E1_STEP_WRITE(v); } else { E0_STEP_WRITE(v); }}
#define NORM_E_DIR() { if(current_block->active_extruder == 1) { E1_DIR_WRITE(!INVERT_E1_DIR); } else { E0_DIR_WRITE(!INVERT_E0_DIR); }} #define NORM_E_DIR() { if(current_block->active_extruder == 1) { E1_DIR_WRITE(!INVERT_E1_DIR); } else { E0_DIR_WRITE(!INVERT_E0_DIR); }}
#define REV_E_DIR() { if(current_block->active_extruder == 1) { E1_DIR_WRITE(INVERT_E1_DIR); } else { E0_DIR_WRITE(INVERT_E0_DIR); }} #define REV_E_DIR() { if(current_block->active_extruder == 1) { E1_DIR_WRITE(INVERT_E1_DIR); } else { E0_DIR_WRITE(INVERT_E0_DIR); }}
@ -49,7 +49,7 @@
#define REV_E_DIR() E0_DIR_WRITE(INVERT_E0_DIR) #define REV_E_DIR() E0_DIR_WRITE(INVERT_E0_DIR)
#endif #endif
#ifdef ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
extern bool abort_on_endstop_hit; extern bool abort_on_endstop_hit;
#endif #endif
@ -95,13 +95,13 @@ void digipot_current(uint8_t driver, int current);
void microstep_init(); void microstep_init();
void microstep_readings(); void microstep_readings();
#ifdef Z_DUAL_ENDSTOPS #if ENABLED(Z_DUAL_ENDSTOPS)
void In_Homing_Process(bool state); void In_Homing_Process(bool state);
void Lock_z_motor(bool state); void Lock_z_motor(bool state);
void Lock_z2_motor(bool state); void Lock_z2_motor(bool state);
#endif #endif
#ifdef BABYSTEPPING #if ENABLED(BABYSTEPPING)
void babystep(const uint8_t axis,const bool direction); // perform a short step with a single stepper motor, outside of any convention void babystep(const uint8_t axis,const bool direction); // perform a short step with a single stepper motor, outside of any convention
#endif #endif

152
Marlin/stepper_indirection.cpp
Unescape Escape View File

@ -22,203 +22,203 @@
#include "stepper_indirection.h" #include "stepper_indirection.h"
#include "Configuration.h" #include "Configuration.h"
#ifdef HAVE_TMCDRIVER #if ENABLED(HAVE_TMCDRIVER)
#include <SPI.h> #include <SPI.h>
#include <TMC26XStepper.h> #include <TMC26XStepper.h>
#endif #endif
// Stepper objects of TMC steppers used // Stepper objects of TMC steppers used
#ifdef X_IS_TMC #if ENABLED(X_IS_TMC)
TMC26XStepper stepperX(200,X_ENABLE_PIN,X_STEP_PIN,X_DIR_PIN,X_MAX_CURRENT,X_SENSE_RESISTOR); TMC26XStepper stepperX(200,X_ENABLE_PIN,X_STEP_PIN,X_DIR_PIN,X_MAX_CURRENT,X_SENSE_RESISTOR);
#endif #endif
#ifdef X2_IS_TMC #if ENABLED(X2_IS_TMC)
TMC26XStepper stepperX2(200,X2_ENABLE_PIN,X2_STEP_PIN,X2_DIR_PIN,X2_MAX_CURRENT,X2_SENSE_RESISTOR); TMC26XStepper stepperX2(200,X2_ENABLE_PIN,X2_STEP_PIN,X2_DIR_PIN,X2_MAX_CURRENT,X2_SENSE_RESISTOR);
#endif #endif
#ifdef Y_IS_TMC #if ENABLED(Y_IS_TMC)
TMC26XStepper stepperY(200,Y_ENABLE_PIN,Y_STEP_PIN,Y_DIR_PIN,Y_MAX_CURRENT,Y_SENSE_RESISTOR); TMC26XStepper stepperY(200,Y_ENABLE_PIN,Y_STEP_PIN,Y_DIR_PIN,Y_MAX_CURRENT,Y_SENSE_RESISTOR);
#endif #endif
#ifdef Y2_IS_TMC #if ENABLED(Y2_IS_TMC)
TMC26XStepper stepperY2(200,Y2_ENABLE_PIN,Y2_STEP_PIN,Y2_DIR_PIN,Y2_MAX_CURRENT,Y2_SENSE_RESISTOR); TMC26XStepper stepperY2(200,Y2_ENABLE_PIN,Y2_STEP_PIN,Y2_DIR_PIN,Y2_MAX_CURRENT,Y2_SENSE_RESISTOR);
#endif #endif
#ifdef Z_IS_TMC #if ENABLED(Z_IS_TMC)
TMC26XStepper stepperZ(200,Z_ENABLE_PIN,Z_STEP_PIN,Z_DIR_PIN,Z_MAX_CURRENT,Z_SENSE_RESISTOR); TMC26XStepper stepperZ(200,Z_ENABLE_PIN,Z_STEP_PIN,Z_DIR_PIN,Z_MAX_CURRENT,Z_SENSE_RESISTOR);
#endif #endif
#ifdef Z2_IS_TMC #if ENABLED(Z2_IS_TMC)
TMC26XStepper stepperZ2(200,Z2_ENABLE_PIN,Z2_STEP_PIN,Z2_DIR_PIN,Z2_MAX_CURRENT,Z2_SENSE_RESISTOR); TMC26XStepper stepperZ2(200,Z2_ENABLE_PIN,Z2_STEP_PIN,Z2_DIR_PIN,Z2_MAX_CURRENT,Z2_SENSE_RESISTOR);
#endif #endif
#ifdef E0_IS_TMC #if ENABLED(E0_IS_TMC)
TMC26XStepper stepperE0(200,E0_ENABLE_PIN,E0_STEP_PIN,E0_DIR_PIN,E0_MAX_CURRENT,E0_SENSE_RESISTOR); TMC26XStepper stepperE0(200,E0_ENABLE_PIN,E0_STEP_PIN,E0_DIR_PIN,E0_MAX_CURRENT,E0_SENSE_RESISTOR);
#endif #endif
#ifdef E1_IS_TMC #if ENABLED(E1_IS_TMC)
TMC26XStepper stepperE1(200,E1_ENABLE_PIN,E1_STEP_PIN,E1_DIR_PIN,E1_MAX_CURRENT,E1_SENSE_RESISTOR); TMC26XStepper stepperE1(200,E1_ENABLE_PIN,E1_STEP_PIN,E1_DIR_PIN,E1_MAX_CURRENT,E1_SENSE_RESISTOR);
#endif #endif
#ifdef E2_IS_TMC #if ENABLED(E2_IS_TMC)
TMC26XStepper stepperE2(200,E2_ENABLE_PIN,E2_STEP_PIN,E2_DIR_PIN,E2_MAX_CURRENT,E2_SENSE_RESISTOR); TMC26XStepper stepperE2(200,E2_ENABLE_PIN,E2_STEP_PIN,E2_DIR_PIN,E2_MAX_CURRENT,E2_SENSE_RESISTOR);
#endif #endif
#ifdef E3_IS_TMC #if ENABLED(E3_IS_TMC)
TMC26XStepper stepperE3(200,E3_ENABLE_PIN,E3_STEP_PIN,E3_DIR_PIN,E3_MAX_CURRENT,E3_SENSE_RESISTOR); TMC26XStepper stepperE3(200,E3_ENABLE_PIN,E3_STEP_PIN,E3_DIR_PIN,E3_MAX_CURRENT,E3_SENSE_RESISTOR);
#endif #endif
#ifdef HAVE_TMCDRIVER #if ENABLED(HAVE_TMCDRIVER)
void tmc_init() void tmc_init()
{ {
#ifdef X_IS_TMC #if ENABLED(X_IS_TMC)
stepperX.setMicrosteps(X_MICROSTEPS); stepperX.setMicrosteps(X_MICROSTEPS);
stepperX.start(); stepperX.start();
#endif #endif
#ifdef X2_IS_TMC #if ENABLED(X2_IS_TMC)
stepperX2.setMicrosteps(X2_MICROSTEPS); stepperX2.setMicrosteps(X2_MICROSTEPS);
stepperX2.start(); stepperX2.start();
#endif #endif
#ifdef Y_IS_TMC #if ENABLED(Y_IS_TMC)
stepperY.setMicrosteps(Y_MICROSTEPS); stepperY.setMicrosteps(Y_MICROSTEPS);
stepperY.start(); stepperY.start();
#endif #endif
#ifdef Y2_IS_TMC #if ENABLED(Y2_IS_TMC)
stepperY2.setMicrosteps(Y2_MICROSTEPS); stepperY2.setMicrosteps(Y2_MICROSTEPS);
stepperY2.start(); stepperY2.start();
#endif #endif
#ifdef Z_IS_TMC #if ENABLED(Z_IS_TMC)
stepperZ.setMicrosteps(Z_MICROSTEPS); stepperZ.setMicrosteps(Z_MICROSTEPS);
stepperZ.start(); stepperZ.start();
#endif #endif
#ifdef Z2_IS_TMC #if ENABLED(Z2_IS_TMC)
stepperZ2.setMicrosteps(Z2_MICROSTEPS); stepperZ2.setMicrosteps(Z2_MICROSTEPS);
stepperZ2.start(); stepperZ2.start();
#endif #endif
#ifdef E0_IS_TMC #if ENABLED(E0_IS_TMC)
stepperE0.setMicrosteps(E0_MICROSTEPS); stepperE0.setMicrosteps(E0_MICROSTEPS);
stepperE0.start(); stepperE0.start();
#endif #endif
#ifdef E1_IS_TMC #if ENABLED(E1_IS_TMC)
stepperE1.setMicrosteps(E1_MICROSTEPS); stepperE1.setMicrosteps(E1_MICROSTEPS);
stepperE1.start(); stepperE1.start();
#endif #endif
#ifdef E2_IS_TMC #if ENABLED(E2_IS_TMC)
stepperE2.setMicrosteps(E2_MICROSTEPS); stepperE2.setMicrosteps(E2_MICROSTEPS);
stepperE2.start(); stepperE2.start();
#endif #endif
#ifdef E3_IS_TMC #if ENABLED(E3_IS_TMC)
stepperE3.setMicrosteps(E3_MICROSTEPS); stepperE3.setMicrosteps(E3_MICROSTEPS);
stepperE3.start(); stepperE3.start();
#endif #endif
} }
#endif #endif
// L6470 Driver objects and inits // L6470 Driver objects and inits
#ifdef HAVE_L6470DRIVER #if ENABLED(HAVE_L6470DRIVER)
#include <SPI.h> #include <SPI.h>
#include <L6470.h> #include <L6470.h>
#endif #endif
// L6470 Stepper objects // L6470 Stepper objects
#ifdef X_IS_L6470 #if ENABLED(X_IS_L6470)
L6470 stepperX(X_ENABLE_PIN); L6470 stepperX(X_ENABLE_PIN);
#endif #endif
#ifdef X2_IS_L6470 #if ENABLED(X2_IS_L6470)
L6470 stepperX2(X2_ENABLE_PIN); L6470 stepperX2(X2_ENABLE_PIN);
#endif #endif
#ifdef Y_IS_L6470 #if ENABLED(Y_IS_L6470)
L6470 stepperY(Y_ENABLE_PIN); L6470 stepperY(Y_ENABLE_PIN);
#endif #endif
#ifdef Y2_IS_L6470 #if ENABLED(Y2_IS_L6470)
L6470 stepperY2(Y2_ENABLE_PIN); L6470 stepperY2(Y2_ENABLE_PIN);
#endif #endif
#ifdef Z_IS_L6470 #if ENABLED(Z_IS_L6470)
L6470 stepperZ(Z_ENABLE_PIN); L6470 stepperZ(Z_ENABLE_PIN);
#endif #endif
#ifdef Z2_IS_L6470 #if ENABLED(Z2_IS_L6470)
L6470 stepperZ2(Z2_ENABLE_PIN); L6470 stepperZ2(Z2_ENABLE_PIN);
#endif #endif
#ifdef E0_IS_L6470 #if ENABLED(E0_IS_L6470)
L6470 stepperE0(E0_ENABLE_PIN); L6470 stepperE0(E0_ENABLE_PIN);
#endif #endif
#ifdef E1_IS_L6470 #if ENABLED(E1_IS_L6470)
L6470 stepperE1(E1_ENABLE_PIN); L6470 stepperE1(E1_ENABLE_PIN);
#endif #endif
#ifdef E2_IS_L6470 #if ENABLED(E2_IS_L6470)
L6470 stepperE2(E2_ENABLE_PIN); L6470 stepperE2(E2_ENABLE_PIN);
#endif #endif
#ifdef E3_IS_L6470 #if ENABLED(E3_IS_L6470)
L6470 stepperE3(E3_ENABLE_PIN); L6470 stepperE3(E3_ENABLE_PIN);
#endif #endif
// init routine // init routine
#ifdef HAVE_L6470DRIVER #if ENABLED(HAVE_L6470DRIVER)
void L6470_init() void L6470_init()
{ {
#ifdef X_IS_L6470 #if ENABLED(X_IS_L6470)
stepperX.init(X_K_VAL); stepperX.init(X_K_VAL);
stepperX.softFree(); stepperX.softFree();
stepperX.setMicroSteps(X_MICROSTEPS); stepperX.setMicroSteps(X_MICROSTEPS);
stepperX.setOverCurrent(X_OVERCURRENT); //set overcurrent protection stepperX.setOverCurrent(X_OVERCURRENT); //set overcurrent protection
stepperX.setStallCurrent(X_STALLCURRENT); stepperX.setStallCurrent(X_STALLCURRENT);
#endif #endif
#ifdef X2_IS_L6470 #if ENABLED(X2_IS_L6470)
stepperX2.init(X2_K_VAL); stepperX2.init(X2_K_VAL);
stepperX2.softFree(); stepperX2.softFree();
stepperX2.setMicroSteps(X2_MICROSTEPS); stepperX2.setMicroSteps(X2_MICROSTEPS);
stepperX2.setOverCurrent(X2_OVERCURRENT); //set overcurrent protection stepperX2.setOverCurrent(X2_OVERCURRENT); //set overcurrent protection
stepperX2.setStallCurrent(X2_STALLCURRENT); stepperX2.setStallCurrent(X2_STALLCURRENT);
#endif #endif
#ifdef Y_IS_L6470 #if ENABLED(Y_IS_L6470)
stepperY.init(Y_K_VAL); stepperY.init(Y_K_VAL);
stepperY.softFree(); stepperY.softFree();
stepperY.setMicroSteps(Y_MICROSTEPS); stepperY.setMicroSteps(Y_MICROSTEPS);
stepperY.setOverCurrent(Y_OVERCURRENT); //set overcurrent protection stepperY.setOverCurrent(Y_OVERCURRENT); //set overcurrent protection
stepperY.setStallCurrent(Y_STALLCURRENT); stepperY.setStallCurrent(Y_STALLCURRENT);
#endif #endif
#ifdef Y2_IS_L6470 #if ENABLED(Y2_IS_L6470)
stepperY2.init(Y2_K_VAL); stepperY2.init(Y2_K_VAL);
stepperY2.softFree(); stepperY2.softFree();
stepperY2.setMicroSteps(Y2_MICROSTEPS); stepperY2.setMicroSteps(Y2_MICROSTEPS);
stepperY2.setOverCurrent(Y2_OVERCURRENT); //set overcurrent protection stepperY2.setOverCurrent(Y2_OVERCURRENT); //set overcurrent protection
stepperY2.setStallCurrent(Y2_STALLCURRENT); stepperY2.setStallCurrent(Y2_STALLCURRENT);
#endif #endif
#ifdef Z_IS_L6470 #if ENABLED(Z_IS_L6470)
stepperZ.init(Z_K_VAL); stepperZ.init(Z_K_VAL);
stepperZ.softFree(); stepperZ.softFree();
stepperZ.setMicroSteps(Z_MICROSTEPS); stepperZ.setMicroSteps(Z_MICROSTEPS);
stepperZ.setOverCurrent(Z_OVERCURRENT); //set overcurrent protection stepperZ.setOverCurrent(Z_OVERCURRENT); //set overcurrent protection
stepperZ.setStallCurrent(Z_STALLCURRENT); stepperZ.setStallCurrent(Z_STALLCURRENT);
#endif #endif
#ifdef Z2_IS_L6470 #if ENABLED(Z2_IS_L6470)
stepperZ2.init(Z2_K_VAL); stepperZ2.init(Z2_K_VAL);
stepperZ2.softFree(); stepperZ2.softFree();
stepperZ2.setMicroSteps(Z2_MICROSTEPS); stepperZ2.setMicroSteps(Z2_MICROSTEPS);
stepperZ2.setOverCurrent(Z2_OVERCURRENT); //set overcurrent protection stepperZ2.setOverCurrent(Z2_OVERCURRENT); //set overcurrent protection
stepperZ2.setStallCurrent(Z2_STALLCURRENT); stepperZ2.setStallCurrent(Z2_STALLCURRENT);
#endif #endif
#ifdef E0_IS_L6470 #if ENABLED(E0_IS_L6470)
stepperE0.init(E0_K_VAL); stepperE0.init(E0_K_VAL);
stepperE0.softFree(); stepperE0.softFree();
stepperE0.setMicroSteps(E0_MICROSTEPS); stepperE0.setMicroSteps(E0_MICROSTEPS);
stepperE0.setOverCurrent(E0_OVERCURRENT); //set overcurrent protection stepperE0.setOverCurrent(E0_OVERCURRENT); //set overcurrent protection
stepperE0.setStallCurrent(E0_STALLCURRENT); stepperE0.setStallCurrent(E0_STALLCURRENT);
#endif #endif
#ifdef E1_IS_L6470 #if ENABLED(E1_IS_L6470)
stepperE1.init(E1_K_VAL); stepperE1.init(E1_K_VAL);
stepperE1.softFree(); stepperE1.softFree();
stepperE1.setMicroSteps(E1_MICROSTEPS); stepperE1.setMicroSteps(E1_MICROSTEPS);
stepperE1.setOverCurrent(E1_OVERCURRENT); //set overcurrent protection stepperE1.setOverCurrent(E1_OVERCURRENT); //set overcurrent protection
stepperE1.setStallCurrent(E1_STALLCURRENT); stepperE1.setStallCurrent(E1_STALLCURRENT);
#endif #endif
#ifdef E2_IS_L6470 #if ENABLED(E2_IS_L6470)
stepperE2.init(E2_K_VAL); stepperE2.init(E2_K_VAL);
stepperE2.softFree(); stepperE2.softFree();
stepperE2.setMicroSteps(E2_MICROSTEPS); stepperE2.setMicroSteps(E2_MICROSTEPS);
stepperE2.setOverCurrent(E2_OVERCURRENT); //set overcurrent protection stepperE2.setOverCurrent(E2_OVERCURRENT); //set overcurrent protection
stepperE2.setStallCurrent(E2_STALLCURRENT); stepperE2.setStallCurrent(E2_STALLCURRENT);
#endif #endif
#ifdef E3_IS_L6470 #if ENABLED(E3_IS_L6470)
stepperE3.init(E3_K_VAL); stepperE3.init(E3_K_VAL);
stepperE3.softFree(); stepperE3.softFree();
stepperE3.setMicroSteps(E3_MICROSTEPS); stepperE3.setMicroSteps(E3_MICROSTEPS);
stepperE3.setOverCurrent(E3_OVERCURRENT); //set overcurrent protection stepperE3.setOverCurrent(E3_OVERCURRENT); //set overcurrent protection
stepperE3.setStallCurrent(E3_STALLCURRENT); stepperE3.setStallCurrent(E3_STALLCURRENT);
#endif #endif
} }
#endif #endif

44
Marlin/stepper_indirection.h
Unescape Escape View File

@ -158,12 +158,12 @@
// Pin redefines for TMC drivers. // Pin redefines for TMC drivers.
// TMC26X drivers have step and dir on normal pins, but everything else via SPI // TMC26X drivers have step and dir on normal pins, but everything else via SPI
////////////////////////////////// //////////////////////////////////
#ifdef HAVE_TMCDRIVER #if ENABLED(HAVE_TMCDRIVER)
#include <SPI.h> #include <SPI.h>
#include <TMC26XStepper.h> #include <TMC26XStepper.h>
void tmc_init(); void tmc_init();
#ifdef X_IS_TMC #if ENABLED(X_IS_TMC)
extern TMC26XStepper stepperX; extern TMC26XStepper stepperX;
#undef X_ENABLE_INIT #undef X_ENABLE_INIT
#define X_ENABLE_INIT ((void)0) #define X_ENABLE_INIT ((void)0)
@ -175,7 +175,7 @@
#define X_ENABLE_READ stepperX.isEnabled() #define X_ENABLE_READ stepperX.isEnabled()
#endif #endif
#ifdef X2_IS_TMC #if ENABLED(X2_IS_TMC)
extern TMC26XStepper stepperX2; extern TMC26XStepper stepperX2;
#undef X2_ENABLE_INIT #undef X2_ENABLE_INIT
#define X2_ENABLE_INIT ((void)0) #define X2_ENABLE_INIT ((void)0)
@ -186,7 +186,7 @@
#undef X2_ENABLE_READ #undef X2_ENABLE_READ
#define X2_ENABLE_READ stepperX2.isEnabled() #define X2_ENABLE_READ stepperX2.isEnabled()
#endif #endif
#ifdef Y_IS_TMC #if ENABLED(Y_IS_TMC)
extern TMC26XStepper stepperY; extern TMC26XStepper stepperY;
#undef Y_ENABLE_INIT #undef Y_ENABLE_INIT
#define Y_ENABLE_INIT ((void)0) #define Y_ENABLE_INIT ((void)0)
@ -197,7 +197,7 @@
#undef Y_ENABLE_READ #undef Y_ENABLE_READ
#define Y_ENABLE_READ stepperY.isEnabled() #define Y_ENABLE_READ stepperY.isEnabled()
#endif #endif
#ifdef Y2_IS_TMC #if ENABLED(Y2_IS_TMC)
extern TMC26XStepper stepperY2; extern TMC26XStepper stepperY2;
#undef Y2_ENABLE_INIT #undef Y2_ENABLE_INIT
#define Y2_ENABLE_INIT ((void)0) #define Y2_ENABLE_INIT ((void)0)
@ -208,7 +208,7 @@
#undef Y2_ENABLE_READ #undef Y2_ENABLE_READ
#define Y2_ENABLE_READ stepperY2.isEnabled() #define Y2_ENABLE_READ stepperY2.isEnabled()
#endif #endif
#ifdef Z_IS_TMC #if ENABLED(Z_IS_TMC)
extern TMC26XStepper stepperZ; extern TMC26XStepper stepperZ;
#undef Z_ENABLE_INIT #undef Z_ENABLE_INIT
#define Z_ENABLE_INIT ((void)0) #define Z_ENABLE_INIT ((void)0)
@ -219,7 +219,7 @@
#undef Z_ENABLE_READ #undef Z_ENABLE_READ
#define Z_ENABLE_READ stepperZ.isEnabled() #define Z_ENABLE_READ stepperZ.isEnabled()
#endif #endif
#ifdef Z2_IS_TMC #if ENABLED(Z2_IS_TMC)
extern TMC26XStepper stepperZ2; extern TMC26XStepper stepperZ2;
#undef Z2_ENABLE_INIT #undef Z2_ENABLE_INIT
#define Z2_ENABLE_INIT ((void)0) #define Z2_ENABLE_INIT ((void)0)
@ -230,7 +230,7 @@
#undef Z2_ENABLE_READ #undef Z2_ENABLE_READ
#define Z2_ENABLE_READ stepperZ2.isEnabled() #define Z2_ENABLE_READ stepperZ2.isEnabled()
#endif #endif
#ifdef E0_IS_TMC #if ENABLED(E0_IS_TMC)
extern TMC26XStepper stepperE0; extern TMC26XStepper stepperE0;
#undef E0_ENABLE_INIT #undef E0_ENABLE_INIT
#define E0_ENABLE_INIT ((void)0) #define E0_ENABLE_INIT ((void)0)
@ -241,7 +241,7 @@
#undef E0_ENABLE_READ #undef E0_ENABLE_READ
#define E0_ENABLE_READ stepperE0.isEnabled() #define E0_ENABLE_READ stepperE0.isEnabled()
#endif #endif
#ifdef E1_IS_TMC #if ENABLED(E1_IS_TMC)
extern TMC26XStepper stepperE1; extern TMC26XStepper stepperE1;
#undef E1_ENABLE_INIT #undef E1_ENABLE_INIT
#define E1_ENABLE_INIT ((void)0) #define E1_ENABLE_INIT ((void)0)
@ -252,7 +252,7 @@
#undef E1_ENABLE_READ #undef E1_ENABLE_READ
#define E1_ENABLE_READ stepperE1.isEnabled() #define E1_ENABLE_READ stepperE1.isEnabled()
#endif #endif
#ifdef E2_IS_TMC #if ENABLED(E2_IS_TMC)
extern TMC26XStepper stepperE2; extern TMC26XStepper stepperE2;
#undef E2_ENABLE_INIT #undef E2_ENABLE_INIT
#define E2_ENABLE_INIT ((void)0) #define E2_ENABLE_INIT ((void)0)
@ -263,7 +263,7 @@
#undef E2_ENABLE_READ #undef E2_ENABLE_READ
#define E2_ENABLE_READ stepperE2.isEnabled() #define E2_ENABLE_READ stepperE2.isEnabled()
#endif #endif
#ifdef E3_IS_TMC #if ENABLED(E3_IS_TMC)
extern TMC26XStepper stepperE3; extern TMC26XStepper stepperE3;
#undef E3_ENABLE_INIT #undef E3_ENABLE_INIT
#define E3_ENABLE_INIT ((void)0) #define E3_ENABLE_INIT ((void)0)
@ -281,13 +281,13 @@
// Pin redefines for L6470 drivers. // Pin redefines for L6470 drivers.
// L640 drivers have step on normal pins, but dir and everything else via SPI // L640 drivers have step on normal pins, but dir and everything else via SPI
////////////////////////////////// //////////////////////////////////
#ifdef HAVE_L6470DRIVER #if ENABLED(HAVE_L6470DRIVER)
#include <SPI.h> #include <SPI.h>
#include <L6470.h> #include <L6470.h>
void L6470_init(); void L6470_init();
#ifdef X_IS_L6470 #if ENABLED(X_IS_L6470)
extern L6470 stepperX; extern L6470 stepperX;
#undef X_ENABLE_INIT #undef X_ENABLE_INIT
#define X_ENABLE_INIT ((void)0) #define X_ENABLE_INIT ((void)0)
@ -308,7 +308,7 @@
#define X_DIR_READ (stepperX.getStatus() & STATUS_DIR) #define X_DIR_READ (stepperX.getStatus() & STATUS_DIR)
#endif #endif
#ifdef X2_IS_L6470 #if ENABLED(X2_IS_L6470)
extern L6470 stepperX2; extern L6470 stepperX2;
#undef X2_ENABLE_INIT #undef X2_ENABLE_INIT
#define X2_ENABLE_INIT ((void)0) #define X2_ENABLE_INIT ((void)0)
@ -328,7 +328,7 @@
#undef X2_DIR_READ #undef X2_DIR_READ
#define X2_DIR_READ (stepperX2.getStatus() & STATUS_DIR) #define X2_DIR_READ (stepperX2.getStatus() & STATUS_DIR)
#endif #endif
#ifdef Y_IS_L6470 #if ENABLED(Y_IS_L6470)
extern L6470 stepperY; extern L6470 stepperY;
#undef Y_ENABLE_INIT #undef Y_ENABLE_INIT
#define Y_ENABLE_INIT ((void)0) #define Y_ENABLE_INIT ((void)0)
@ -348,7 +348,7 @@
#undef Y_DIR_READ #undef Y_DIR_READ
#define Y_DIR_READ (stepperY.getStatus() & STATUS_DIR) #define Y_DIR_READ (stepperY.getStatus() & STATUS_DIR)
#endif #endif
#ifdef Y2_IS_L6470 #if ENABLED(Y2_IS_L6470)
extern L6470 stepperY2; extern L6470 stepperY2;
#undef Y2_ENABLE_INIT #undef Y2_ENABLE_INIT
#define Y2_ENABLE_INIT ((void)0) #define Y2_ENABLE_INIT ((void)0)
@ -368,7 +368,7 @@
#undef Y2_DIR_READ #undef Y2_DIR_READ
#define Y2_DIR_READ (stepperY2.getStatus() & STATUS_DIR) #define Y2_DIR_READ (stepperY2.getStatus() & STATUS_DIR)
#endif #endif
#ifdef Z_IS_L6470 #if ENABLED(Z_IS_L6470)
extern L6470 stepperZ; extern L6470 stepperZ;
#undef Z_ENABLE_INIT #undef Z_ENABLE_INIT
#define Z_ENABLE_INIT ((void)0) #define Z_ENABLE_INIT ((void)0)
@ -388,7 +388,7 @@
#undef Y_DIR_READ #undef Y_DIR_READ
#define Y_DIR_READ (stepperZ.getStatus() & STATUS_DIR) #define Y_DIR_READ (stepperZ.getStatus() & STATUS_DIR)
#endif #endif
#ifdef Z2_IS_L6470 #if ENABLED(Z2_IS_L6470)
extern L6470 stepperZ2; extern L6470 stepperZ2;
#undef Z2_ENABLE_INIT #undef Z2_ENABLE_INIT
#define Z2_ENABLE_INIT ((void)0) #define Z2_ENABLE_INIT ((void)0)
@ -408,7 +408,7 @@
#undef Y2_DIR_READ #undef Y2_DIR_READ
#define Y2_DIR_READ (stepperZ2.getStatus() & STATUS_DIR) #define Y2_DIR_READ (stepperZ2.getStatus() & STATUS_DIR)
#endif #endif
#ifdef E0_IS_L6470 #if ENABLED(E0_IS_L6470)
extern L6470 stepperE0; extern L6470 stepperE0;
#undef E0_ENABLE_INIT #undef E0_ENABLE_INIT
#define E0_ENABLE_INIT ((void)0) #define E0_ENABLE_INIT ((void)0)
@ -428,7 +428,7 @@
#undef E0_DIR_READ #undef E0_DIR_READ
#define E0_DIR_READ (stepperE0.getStatus() & STATUS_DIR) #define E0_DIR_READ (stepperE0.getStatus() & STATUS_DIR)
#endif #endif
#ifdef E1_IS_L6470 #if ENABLED(E1_IS_L6470)
extern L6470 stepperE1; extern L6470 stepperE1;
#undef E1_ENABLE_INIT #undef E1_ENABLE_INIT
#define E1_ENABLE_INIT ((void)0) #define E1_ENABLE_INIT ((void)0)
@ -448,7 +448,7 @@
#undef E1_DIR_READ #undef E1_DIR_READ
#define E1_DIR_READ (stepperE1.getStatus() & STATUS_DIR) #define E1_DIR_READ (stepperE1.getStatus() & STATUS_DIR)
#endif #endif
#ifdef E2_IS_L6470 #if ENABLED(E2_IS_L6470)
extern L6470 stepperE2; extern L6470 stepperE2;
#undef E2_ENABLE_INIT #undef E2_ENABLE_INIT
#define E2_ENABLE_INIT ((void)0) #define E2_ENABLE_INIT ((void)0)
@ -468,7 +468,7 @@
#undef E2_DIR_READ #undef E2_DIR_READ
#define E2_DIR_READ (stepperE2.getStatus() & STATUS_DIR) #define E2_DIR_READ (stepperE2.getStatus() & STATUS_DIR)
#endif #endif
#ifdef E3_IS_L6470 #if ENABLED(E3_IS_L6470)
extern L6470 stepperE3; extern L6470 stepperE3;
#undef E3_ENABLE_INIT #undef E3_ENABLE_INIT
#define E3_ENABLE_INIT ((void)0) #define E3_ENABLE_INIT ((void)0)

Write Preview
Loading…
Cancel
Save