Implement digipots for MKS SBASE (#9927)

Fix #9477

Marlin/src/HAL/HAL_LPC1768/include/digipot_mcp4451_I2C_routines.c

@@ -23,18 +23,16 @@
 // adapted from  I2C/master/master.c example
 //   https://www-users.cs.york.ac.uk/~pcc/MCP/HAPR-Course-web/CMSIS/examples/html/master_8c_source.html
 
-#ifdef TARGET_LPC1768
+#include "../../../inc/MarlinConfigPre.h"
+
+#if MB(MKS_SBASE)
+
+#include "digipot_mcp4451_I2C_routines.h"
 
 #ifdef __cplusplus
   extern "C" {
 #endif
 
-#include <lpc17xx_i2c.h>
-#include <lpc17xx_pinsel.h>
-#include <lpc17xx_libcfg_default.h>
-
-//////////////////////////////////////////////////////////////////////////////////////
-
 // These two routines are exact copies of the lpc17xx_i2c.c routines.  Couldn't link to
 // to the lpc17xx_i2c.c routines so had to copy them into this file & rename them.
 
@@ -52,7 +50,7 @@ static uint32_t _I2C_Start (LPC_I2C_TypeDef *I2Cx) {
 }
 
 static void _I2C_Stop(LPC_I2C_TypeDef *I2Cx) {
-  /* Make sure start bit is not active */
+  // Make sure start bit is not active
   if (I2Cx->I2CONSET & I2C_I2CONSET_STA)
     I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
 
@@ -60,29 +58,11 @@ static void _I2C_Stop (LPC_I2C_TypeDef *I2Cx) {
   I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
 }
 
-
-//////////////////////////////////////////////////////////////////////////////////////
-
-
-#define USEDI2CDEV_M  1  // use I2C1 controller
-
-#if (USEDI2CDEV_M == 0)
-  #define I2CDEV_M LPC_I2C0
-#elif (USEDI2CDEV_M == 1)
-  #define I2CDEV_M LPC_I2C1
-#elif (USEDI2CDEV_M == 2)
-  #define I2CDEV_M LPC_I2C2
-#else
-  #error "Master I2C device not defined!"
-#endif
-
-
 PINSEL_CFG_Type PinCfg;
 I2C_M_SETUP_Type transferMCfg;
 
 #define I2C_status (LPC_I2C1->I2STAT & I2C_STAT_CODE_BITMASK)
 
-
 uint8_t digipot_mcp4451_start(uint8_t sla) {  // send slave address and write bit
   // Sometimes TX data ACK or NAK status is returned.  That mean the start state didn't
   // happen which means only the value of the slave address was send.  Keep looping until
@@ -102,36 +82,32 @@ uint8_t digipot_mcp4451_start(uint8_t sla) {  // send slave address and write bi
     while ((I2C_status != I2C_I2STAT_M_TX_SLAW_ACK)
         && (I2C_status != I2C_I2STAT_M_TX_SLAW_NACK)
         && (I2C_status != I2C_I2STAT_M_TX_DAT_ACK)
-        && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK));  //wait for slaw to finish
+        && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)) { /* wait for slaw to finish */ }
   } while ( (I2C_status == I2C_I2STAT_M_TX_DAT_ACK) || (I2C_status == I2C_I2STAT_M_TX_DAT_NACK));
   return 1;
 }
 
-
 void digipot_mcp4451_init(void) {
-
   /**
    * Init I2C pin connect
    */
   PinCfg.OpenDrain = 0;
   PinCfg.Pinmode = 0;
-  #if ((USEDI2CDEV_M == 0))
+  #if USEDI2CDEV_M == 0
     PinCfg.Funcnum = 1;
     PinCfg.Pinnum = 27;
     PinCfg.Portnum = 0;
     PINSEL_ConfigPin(&PinCfg); // SDA0 / D57  AUX-1
     PinCfg.Pinnum = 28;
     PINSEL_ConfigPin(&PinCfg); // SCL0 / D58  AUX-1
-  #endif
+  #elif USEDI2CDEV_M == 1
-  #if ((USEDI2CDEV_M == 1))
     PinCfg.Funcnum = 3;
     PinCfg.Pinnum = 0;
     PinCfg.Portnum = 0;
     PINSEL_ConfigPin(&PinCfg);  // SDA1 / D20 SCA
     PinCfg.Pinnum = 1;
     PINSEL_ConfigPin(&PinCfg);  // SCL1 / D21 SCL
-  #endif
+  #elif USEDI2CDEV_M == 2
-  #if ((USEDI2CDEV_M == 2))
     PinCfg.Funcnum = 2;
     PinCfg.Pinnum = 10;
     PinCfg.Portnum = 0;
@@ -142,16 +118,15 @@ void digipot_mcp4451_init(void) {
   // Initialize I2C peripheral
   I2C_Init(I2CDEV_M, 400000);  // hardwired to 400KHz bit rate, 100KHz is the other option
 
-  /* Enable Master I2C operation */
+  // Enable Master I2C operation
   I2C_Cmd(I2CDEV_M, I2C_MASTER_MODE, ENABLE);
 }
 
-
 uint8_t digipot_mcp4451_send_byte(uint8_t data) {
   LPC_I2C1->I2DAT = data & I2C_I2DAT_BITMASK; // transmit data
   LPC_I2C1->I2CONSET = I2C_I2CONSET_AA;
   LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC;
-  while ((I2C_status != I2C_I2STAT_M_TX_DAT_ACK) && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK));  // wait for xmit to finish
+  while (I2C_status != I2C_I2STAT_M_TX_DAT_ACK && I2C_status != I2C_I2STAT_M_TX_DAT_NACK);  // wait for xmit to finish
   return 1;
 }
 
@@ -159,4 +134,4 @@ uint8_t digipot_mcp4451_send_byte(uint8_t data) {
   }
 #endif
 
-#endif // TARGET_LPC1768
+#endif // MB(MKS_SBASE)

Marlin/src/HAL/HAL_LPC1768/include/digipot_mcp4451_I2C_routines.h

@@ -0,0 +1,57 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+// adapted from  I2C/master/master.c example
+//   https://www-users.cs.york.ac.uk/~pcc/MCP/HAPR-Course-web/CMSIS/examples/html/master_8c_source.html
+
+#ifndef _DIGIPOT_MCP4451_I2C_ROUTINES_H_
+#define _DIGIPOT_MCP4451_I2C_ROUTINES_H_
+
+#define USEDI2CDEV_M  1  // use I2C1 controller
+
+#if USEDI2CDEV_M == 0
+  #define I2CDEV_M LPC_I2C0
+#elif USEDI2CDEV_M == 1
+  #define I2CDEV_M LPC_I2C1
+#elif USEDI2CDEV_M == 2
+  #define I2CDEV_M LPC_I2C2
+#else
+  #error "Master I2C device not defined!"
+#endif
+
+#ifdef __cplusplus
+  extern "C" {
+#endif
+
+#include <lpc17xx_i2c.h>
+#include <lpc17xx_pinsel.h>
+#include <lpc17xx_libcfg_default.h>
+
+uint8_t digipot_mcp4451_start(uint8_t sla);
+void digipot_mcp4451_init(void);
+uint8_t digipot_mcp4451_send_byte(uint8_t data);
+
+#ifdef __cplusplus
+  }
+#endif
+
+#endif // _DIGIPOT_MCP4451_I2C_ROUTINES_H_

Marlin/src/feature/digipot/digipot_mcp4451.cpp

@@ -27,6 +27,10 @@
 #include "Stream.h"
 #include <Wire.h>
 
+#if MB(MKS_SBASE)
+  #include "digipot_mcp4451_I2C_routines.h"
+#endif
+
 // Settings for the I2C based DIGIPOT (MCP4451) on Azteeg X3 Pro
 #if MB(5DPRINT)
   #define DIGIPOT_I2C_FACTOR 117.96
@@ -41,10 +45,16 @@ static byte current_to_wiper(const float current) {
 }
 
 static void i2c_send(const byte addr, const byte a, const byte b) {
+  #if MB(MKS_SBASE)
+    digipot_mcp4451_start(addr);
+    digipot_mcp4451_send_byte(a);
+    digipot_mcp4451_send_byte(b);
+  #else
     Wire.beginTransmission(addr);
     Wire.write(a);
     Wire.write(b);
     Wire.endTransmission();
+  #endif
 }
 
 // This is for the MCP4451 I2C based digipot
@@ -63,9 +73,13 @@ void digipot_i2c_set_current(const uint8_t channel, const float current) {
 }
 
 void digipot_i2c_init() {
-  static const float digipot_motor_current[] PROGMEM = DIGIPOT_I2C_MOTOR_CURRENTS;
+  #if MB(MKS_SBASE)
+    digipot_mcp4451_init();
+  #else
     Wire.begin();
+  #endif
   // setup initial currents as defined in Configuration_adv.h
+  static const float digipot_motor_current[] PROGMEM = DIGIPOT_I2C_MOTOR_CURRENTS;
   for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++)
     digipot_i2c_set_current(i, pgm_read_float(&digipot_motor_current[i]));
 }