|
|
|
@ -36,174 +36,21 @@
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
// Change EEPROM version if the structure changes
|
|
|
|
|
#define EEPROM_VERSION "V48"
|
|
|
|
|
|
|
|
|
|
// Change EEPROM version if these are changed:
|
|
|
|
|
#define EEPROM_OFFSET 100
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* V48 EEPROM Layout:
|
|
|
|
|
*
|
|
|
|
|
* 100 Version (char x4)
|
|
|
|
|
* 104 EEPROM CRC16 (uint16_t)
|
|
|
|
|
*
|
|
|
|
|
* 106 E_STEPPERS (uint8_t)
|
|
|
|
|
* 107 M92 XYZE planner.axis_steps_per_mm (float x4 ... x8) + 64
|
|
|
|
|
* 123 M203 XYZE planner.max_feedrate_mm_s (float x4 ... x8) + 64
|
|
|
|
|
* 139 M201 XYZE planner.max_acceleration_mm_per_s2 (uint32_t x4 ... x8) + 64
|
|
|
|
|
* 155 M204 P planner.acceleration (float)
|
|
|
|
|
* 159 M204 R planner.retract_acceleration (float)
|
|
|
|
|
* 163 M204 T planner.travel_acceleration (float)
|
|
|
|
|
* 167 M205 S planner.min_feedrate_mm_s (float)
|
|
|
|
|
* 171 M205 T planner.min_travel_feedrate_mm_s (float)
|
|
|
|
|
* 175 M205 B planner.min_segment_time_us (ulong)
|
|
|
|
|
* 179 M205 X planner.max_jerk[X_AXIS] (float)
|
|
|
|
|
* 183 M205 Y planner.max_jerk[Y_AXIS] (float)
|
|
|
|
|
* 187 M205 Z planner.max_jerk[Z_AXIS] (float)
|
|
|
|
|
* 191 M205 E planner.max_jerk[E_AXIS] (float)
|
|
|
|
|
* 195 M206 XYZ home_offset (float x3)
|
|
|
|
|
* 207 M218 XYZ hotend_offset (float x3 per additional hotend) +16
|
|
|
|
|
*
|
|
|
|
|
* Global Leveling: 4 bytes
|
|
|
|
|
* 219 z_fade_height (float)
|
|
|
|
|
*
|
|
|
|
|
* MESH_BED_LEVELING: 43 bytes
|
|
|
|
|
* 223 M420 S planner.leveling_active (bool)
|
|
|
|
|
* 224 mbl.z_offset (float)
|
|
|
|
|
* 228 GRID_MAX_POINTS_X (uint8_t)
|
|
|
|
|
* 229 GRID_MAX_POINTS_Y (uint8_t)
|
|
|
|
|
* 230 G29 S3 XYZ z_values[][] (float x9, up to float x81) +288
|
|
|
|
|
*
|
|
|
|
|
* HAS_BED_PROBE: 4 bytes
|
|
|
|
|
* 266 M851 zprobe_zoffset (float)
|
|
|
|
|
*
|
|
|
|
|
* ABL_PLANAR: 36 bytes
|
|
|
|
|
* 270 planner.bed_level_matrix (matrix_3x3 = float x9)
|
|
|
|
|
*
|
|
|
|
|
* AUTO_BED_LEVELING_BILINEAR: 46 bytes
|
|
|
|
|
* 306 GRID_MAX_POINTS_X (uint8_t)
|
|
|
|
|
* 307 GRID_MAX_POINTS_Y (uint8_t)
|
|
|
|
|
* 308 bilinear_grid_spacing (int x2)
|
|
|
|
|
* 312 G29 L F bilinear_start (int x2)
|
|
|
|
|
* 316 z_values[][] (float x9, up to float x256) +988
|
|
|
|
|
*
|
|
|
|
|
* AUTO_BED_LEVELING_UBL: 2 bytes
|
|
|
|
|
* 352 G29 A planner.leveling_active (bool)
|
|
|
|
|
* 353 G29 S ubl.storage_slot (int8_t)
|
|
|
|
|
*
|
|
|
|
|
* DELTA: 44 bytes
|
|
|
|
|
* 354 M666 H delta_height (float)
|
|
|
|
|
* 358 M666 XYZ delta_endstop_adj (float x3)
|
|
|
|
|
* 370 M665 R delta_radius (float)
|
|
|
|
|
* 374 M665 L delta_diagonal_rod (float)
|
|
|
|
|
* 378 M665 S delta_segments_per_second (float)
|
|
|
|
|
* 382 M665 B delta_calibration_radius (float)
|
|
|
|
|
* 386 M665 X delta_tower_angle_trim[A] (float)
|
|
|
|
|
* 390 M665 Y delta_tower_angle_trim[B] (float)
|
|
|
|
|
* 394 M665 Z delta_tower_angle_trim[C] (float)
|
|
|
|
|
*
|
|
|
|
|
* [XYZ]_DUAL_ENDSTOPS: 12 bytes
|
|
|
|
|
* 354 M666 X x_endstop_adj (float)
|
|
|
|
|
* 358 M666 Y y_endstop_adj (float)
|
|
|
|
|
* 362 M666 Z z_endstop_adj (float)
|
|
|
|
|
*
|
|
|
|
|
* ULTIPANEL: 6 bytes
|
|
|
|
|
* 398 M145 S0 H lcd_preheat_hotend_temp (int x2)
|
|
|
|
|
* 402 M145 S0 B lcd_preheat_bed_temp (int x2)
|
|
|
|
|
* 406 M145 S0 F lcd_preheat_fan_speed (int x2)
|
|
|
|
|
*
|
|
|
|
|
* PIDTEMP: 82 bytes
|
|
|
|
|
* 410 M301 E0 PIDC Kp[0], Ki[0], Kd[0], Kc[0] (float x4)
|
|
|
|
|
* 426 M301 E1 PIDC Kp[1], Ki[1], Kd[1], Kc[1] (float x4)
|
|
|
|
|
* 442 M301 E2 PIDC Kp[2], Ki[2], Kd[2], Kc[2] (float x4)
|
|
|
|
|
* 458 M301 E3 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4)
|
|
|
|
|
* 474 M301 E4 PIDC Kp[3], Ki[3], Kd[3], Kc[3] (float x4)
|
|
|
|
|
* 490 M301 L lpq_len (int)
|
|
|
|
|
*
|
|
|
|
|
* PIDTEMPBED: 12 bytes
|
|
|
|
|
* 492 M304 PID bedKp, .bedKi, .bedKd (float x3)
|
|
|
|
|
*
|
|
|
|
|
* DOGLCD: 2 bytes
|
|
|
|
|
* 504 M250 C lcd_contrast (uint16_t)
|
|
|
|
|
*
|
|
|
|
|
* FWRETRACT: 33 bytes
|
|
|
|
|
* 506 M209 S autoretract_enabled (bool)
|
|
|
|
|
* 507 M207 S retract_length (float)
|
|
|
|
|
* 511 M207 F retract_feedrate_mm_s (float)
|
|
|
|
|
* 515 M207 Z retract_zlift (float)
|
|
|
|
|
* 519 M208 S retract_recover_length (float)
|
|
|
|
|
* 523 M208 F retract_recover_feedrate_mm_s (float)
|
|
|
|
|
* 527 M207 W swap_retract_length (float)
|
|
|
|
|
* 531 M208 W swap_retract_recover_length (float)
|
|
|
|
|
* 535 M208 R swap_retract_recover_feedrate_mm_s (float)
|
|
|
|
|
*
|
|
|
|
|
* Volumetric Extrusion: 21 bytes
|
|
|
|
|
* 539 M200 D parser.volumetric_enabled (bool)
|
|
|
|
|
* 540 M200 T D planner.filament_size (float x5) (T0..4)
|
|
|
|
|
*
|
|
|
|
|
* HAS_TRINAMIC: 22 bytes
|
|
|
|
|
* 560 M906 X Stepper X current (uint16_t)
|
|
|
|
|
* 562 M906 Y Stepper Y current (uint16_t)
|
|
|
|
|
* 564 M906 Z Stepper Z current (uint16_t)
|
|
|
|
|
* 566 M906 X2 Stepper X2 current (uint16_t)
|
|
|
|
|
* 568 M906 Y2 Stepper Y2 current (uint16_t)
|
|
|
|
|
* 570 M906 Z2 Stepper Z2 current (uint16_t)
|
|
|
|
|
* 572 M906 E0 Stepper E0 current (uint16_t)
|
|
|
|
|
* 574 M906 E1 Stepper E1 current (uint16_t)
|
|
|
|
|
* 576 M906 E2 Stepper E2 current (uint16_t)
|
|
|
|
|
* 578 M906 E3 Stepper E3 current (uint16_t)
|
|
|
|
|
* 580 M906 E4 Stepper E4 current (uint16_t)
|
|
|
|
|
*
|
|
|
|
|
* SENSORLESS_HOMING: 4 bytes
|
|
|
|
|
* 582 M914 X Stepper X and X2 threshold (int16_t)
|
|
|
|
|
* 584 M914 Y Stepper Y and Y2 threshold (int16_t)
|
|
|
|
|
*
|
|
|
|
|
* LIN_ADVANCE: 8 bytes
|
|
|
|
|
* 586 M900 K extruder_advance_k (float)
|
|
|
|
|
* 590 M900 WHD advance_ed_ratio (float)
|
|
|
|
|
*
|
|
|
|
|
* HAS_MOTOR_CURRENT_PWM:
|
|
|
|
|
* 594 M907 X Stepper XY current (uint32_t)
|
|
|
|
|
* 598 M907 Z Stepper Z current (uint32_t)
|
|
|
|
|
* 602 M907 E Stepper E current (uint32_t)
|
|
|
|
|
*
|
|
|
|
|
* CNC_COORDINATE_SYSTEMS: 108 bytes
|
|
|
|
|
* 606 G54-G59.3 coordinate_system (float x 27)
|
|
|
|
|
*
|
|
|
|
|
* SKEW_CORRECTION: 12 bytes
|
|
|
|
|
* 714 M852 I planner.xy_skew_factor (float)
|
|
|
|
|
* 718 M852 J planner.xz_skew_factor (float)
|
|
|
|
|
* 722 M852 K planner.yz_skew_factor (float)
|
|
|
|
|
*
|
|
|
|
|
* ADVANCED_PAUSE_FEATURE: 40 bytes
|
|
|
|
|
* 726 M603 T U filament_change_unload_length (float x 5) (T0..4)
|
|
|
|
|
* 746 M603 T L filament_change_load_length (float x 5) (T0..4)
|
|
|
|
|
*
|
|
|
|
|
* 766 Minimum end-point
|
|
|
|
|
* 2295 (766 + 208 + 36 + 9 + 288 + 988) Maximum end-point
|
|
|
|
|
*
|
|
|
|
|
* ========================================================================
|
|
|
|
|
* meshes_begin (between max and min end-point, directly above)
|
|
|
|
|
* -- MESHES --
|
|
|
|
|
* meshes_end
|
|
|
|
|
* -- MAT (Mesh Allocation Table) -- 128 bytes (placeholder size)
|
|
|
|
|
* mat_end = E2END (0xFFF)
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
#include "configuration_store.h"
|
|
|
|
|
|
|
|
|
|
MarlinSettings settings;
|
|
|
|
|
|
|
|
|
|
#include "endstops.h"
|
|
|
|
|
#include "planner.h"
|
|
|
|
|
#include "stepper.h"
|
|
|
|
|
#include "temperature.h"
|
|
|
|
|
#include "../lcd/ultralcd.h"
|
|
|
|
|
#include "../core/language.h"
|
|
|
|
|
#include "../libs/vector_3.h"
|
|
|
|
|
#include "../gcode/gcode.h"
|
|
|
|
|
#include "../Marlin.h"
|
|
|
|
|
|
|
|
|
|
#include "../gcode/parser.h"
|
|
|
|
|
|
|
|
|
|
#if HAS_LEVELING
|
|
|
|
|
#include "../feature/bedlevel/bedlevel.h"
|
|
|
|
|
#endif
|
|
|
|
@ -220,13 +67,196 @@ MarlinSettings settings;
|
|
|
|
|
#include "../feature/fwretract.h"
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
|
|
|
float new_z_fade_height;
|
|
|
|
|
typedef struct PID { float Kp, Ki, Kd; } PID;
|
|
|
|
|
typedef struct PIDC { float Kp, Ki, Kd, Kc; } PIDC;
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* Current EEPROM Layout
|
|
|
|
|
*
|
|
|
|
|
* Keep this data structure up to date so
|
|
|
|
|
* EEPROM size is known at compile time!
|
|
|
|
|
*/
|
|
|
|
|
typedef struct SettingsDataStruct {
|
|
|
|
|
char version[4]; // Vnn\0
|
|
|
|
|
uint16_t crc; // Data Checksum
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// DISTINCT_E_FACTORS
|
|
|
|
|
//
|
|
|
|
|
uint8_t esteppers; // XYZE_N - XYZ
|
|
|
|
|
|
|
|
|
|
float planner_axis_steps_per_mm[XYZE_N], // M92 XYZE planner.axis_steps_per_mm[XYZE_N]
|
|
|
|
|
planner_max_feedrate_mm_s[XYZE_N]; // M203 XYZE planner.max_feedrate_mm_s[XYZE_N]
|
|
|
|
|
uint32_t planner_max_acceleration_mm_per_s2[XYZE_N]; // M201 XYZE planner.max_acceleration_mm_per_s2[XYZE_N]
|
|
|
|
|
float planner_acceleration, // M204 P planner.acceleration
|
|
|
|
|
planner_retract_acceleration, // M204 R planner.retract_acceleration
|
|
|
|
|
planner_travel_acceleration, // M204 T planner.travel_acceleration
|
|
|
|
|
planner_min_feedrate_mm_s, // M205 S planner.min_feedrate_mm_s
|
|
|
|
|
planner_min_travel_feedrate_mm_s; // M205 T planner.min_travel_feedrate_mm_s
|
|
|
|
|
uint32_t planner_min_segment_time_us; // M205 B planner.min_segment_time_us
|
|
|
|
|
float planner_max_jerk[XYZE]; // M205 XYZE planner.max_jerk[XYZE]
|
|
|
|
|
|
|
|
|
|
float home_offset[XYZ]; // M206 XYZ
|
|
|
|
|
|
|
|
|
|
#if HOTENDS > 1
|
|
|
|
|
float hotend_offset[XYZ][HOTENDS - 1]; // M218 XYZ
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// ENABLE_LEVELING_FADE_HEIGHT
|
|
|
|
|
//
|
|
|
|
|
float planner_z_fade_height; // M420 Zn planner.z_fade_height
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// MESH_BED_LEVELING
|
|
|
|
|
//
|
|
|
|
|
bool mbl_has_mesh; // mbl.has_mesh
|
|
|
|
|
float mbl_z_offset; // mbl.z_offset
|
|
|
|
|
uint8_t mesh_num_x, mesh_num_y; // GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y
|
|
|
|
|
#if ENABLED(MESH_BED_LEVELING)
|
|
|
|
|
float mbl_z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; // mbl.z_values
|
|
|
|
|
#else
|
|
|
|
|
float mbl_z_values[3][3];
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// HAS_BED_PROBE
|
|
|
|
|
//
|
|
|
|
|
float zprobe_zoffset; // M851 Z
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// ABL_PLANAR
|
|
|
|
|
//
|
|
|
|
|
matrix_3x3 planner_bed_level_matrix; // planner.bed_level_matrix
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// AUTO_BED_LEVELING_BILINEAR
|
|
|
|
|
//
|
|
|
|
|
uint8_t grid_max_x, grid_max_y; // GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y
|
|
|
|
|
int bilinear_grid_spacing[2],
|
|
|
|
|
bilinear_start[2]; // G29 L F
|
|
|
|
|
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
|
|
|
|
float z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y]; // G29
|
|
|
|
|
#else
|
|
|
|
|
float z_values[3][3];
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// AUTO_BED_LEVELING_UBL
|
|
|
|
|
//
|
|
|
|
|
bool planner_leveling_active; // M420 S planner.leveling_active
|
|
|
|
|
int8_t ubl_storage_slot; // ubl.storage_slot
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// DELTA / [XYZ]_DUAL_ENDSTOPS
|
|
|
|
|
//
|
|
|
|
|
#if ENABLED(DELTA)
|
|
|
|
|
float delta_height, // M666 H
|
|
|
|
|
delta_endstop_adj[ABC], // M666 XYZ
|
|
|
|
|
delta_radius, // M665 R
|
|
|
|
|
delta_diagonal_rod, // M665 L
|
|
|
|
|
delta_segments_per_second, // M665 S
|
|
|
|
|
delta_calibration_radius, // M665 B
|
|
|
|
|
delta_tower_angle_trim[ABC]; // M665 XYZ
|
|
|
|
|
#elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS)
|
|
|
|
|
float x_endstop_adj, // M666 X
|
|
|
|
|
y_endstop_adj, // M666 Y
|
|
|
|
|
z_endstop_adj; // M666 Z
|
|
|
|
|
float xyz_dual_reserved[8];
|
|
|
|
|
#else
|
|
|
|
|
float xyz_dual_placeholder[11];
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// ULTIPANEL
|
|
|
|
|
//
|
|
|
|
|
int lcd_preheat_hotend_temp[2], // M145 S0 H
|
|
|
|
|
lcd_preheat_bed_temp[2], // M145 S0 B
|
|
|
|
|
lcd_preheat_fan_speed[2]; // M145 S0 F
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// PIDTEMP
|
|
|
|
|
//
|
|
|
|
|
PIDC hotendPID[MAX_EXTRUDERS]; // M301 En PIDC / M303 En U
|
|
|
|
|
|
|
|
|
|
int lpq_len; // M301 L
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// PIDTEMPBED
|
|
|
|
|
//
|
|
|
|
|
PID bedPID; // M304 PID / M303 E-1 U
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// HAS_LCD_CONTRAST
|
|
|
|
|
//
|
|
|
|
|
uint16_t lcd_contrast; // M250 C
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// FWRETRACT
|
|
|
|
|
//
|
|
|
|
|
bool autoretract_enabled; // M209 S
|
|
|
|
|
float retract_length, // M207 S
|
|
|
|
|
retract_feedrate_mm_s, // M207 F
|
|
|
|
|
retract_zlift, // M207 Z
|
|
|
|
|
retract_recover_length, // M208 S
|
|
|
|
|
retract_recover_feedrate_mm_s, // M208 F
|
|
|
|
|
swap_retract_length, // M207 W
|
|
|
|
|
swap_retract_recover_length, // M208 W
|
|
|
|
|
swap_retract_recover_feedrate_mm_s; // M208 R
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// !NO_VOLUMETRIC
|
|
|
|
|
//
|
|
|
|
|
bool parser_volumetric_enabled; // M200 D parser.volumetric_enabled
|
|
|
|
|
float planner_filament_size[MAX_EXTRUDERS]; // M200 T D planner.filament_size[]
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// HAS_TRINAMIC
|
|
|
|
|
//
|
|
|
|
|
uint16_t tmc_stepper_current[11]; // M906 X Y Z X2 Y2 Z2 E0 E1 E2 E3 E4
|
|
|
|
|
int16_t tmc_sgt[2]; // M914 X Y
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// LIN_ADVANCE
|
|
|
|
|
//
|
|
|
|
|
float planner_extruder_advance_k, // M900 K planner.extruder_advance_k
|
|
|
|
|
planner_advance_ed_ratio; // M900 WHD planner.advance_ed_ratio
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// HAS_MOTOR_CURRENT_PWM
|
|
|
|
|
//
|
|
|
|
|
uint32_t motor_current_setting[XYZ]; // M907 X Z E
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// CNC_COORDINATE_SYSTEMS
|
|
|
|
|
//
|
|
|
|
|
float coordinate_system[MAX_COORDINATE_SYSTEMS][XYZ]; // G54-G59.3
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// SKEW_CORRECTION
|
|
|
|
|
//
|
|
|
|
|
float planner_xy_skew_factor, // M852 I planner.xy_skew_factor
|
|
|
|
|
planner_xz_skew_factor, // M852 J planner.xz_skew_factor
|
|
|
|
|
planner_yz_skew_factor; // M852 K planner.yz_skew_factor
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// ADVANCED_PAUSE_FEATURE
|
|
|
|
|
//
|
|
|
|
|
float filament_change_unload_length[MAX_EXTRUDERS], // M603 T U
|
|
|
|
|
filament_change_load_length[MAX_EXTRUDERS]; // M603 T L
|
|
|
|
|
|
|
|
|
|
} SettingsData;
|
|
|
|
|
|
|
|
|
|
MarlinSettings settings;
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* Post-process after Retrieve or Reset
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
|
|
|
|
float new_z_fade_height;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
void MarlinSettings::postprocess() {
|
|
|
|
|
const float oldpos[] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] };
|
|
|
|
|
|
|
|
|
@ -686,7 +716,7 @@ void MarlinSettings::postprocess() {
|
|
|
|
|
EEPROM_WRITE(coordinate_system); // 27 floats
|
|
|
|
|
#else
|
|
|
|
|
dummy = 0.0f;
|
|
|
|
|
for (uint8_t q = 27; q--;) EEPROM_WRITE(dummy);
|
|
|
|
|
for (uint8_t q = MAX_COORDINATE_SYSTEMS * XYZ; q--;) EEPROM_WRITE(dummy);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
@ -723,11 +753,8 @@ void MarlinSettings::postprocess() {
|
|
|
|
|
// Validate CRC
|
|
|
|
|
//
|
|
|
|
|
if (!eeprom_error) {
|
|
|
|
|
#if ENABLED(EEPROM_CHITCHAT)
|
|
|
|
|
const int eeprom_size = eeprom_index;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
const uint16_t final_crc = working_crc;
|
|
|
|
|
const uint16_t eeprom_size = eeprom_index - (EEPROM_OFFSET),
|
|
|
|
|
final_crc = working_crc;
|
|
|
|
|
|
|
|
|
|
// Write the EEPROM header
|
|
|
|
|
eeprom_index = EEPROM_OFFSET;
|
|
|
|
@ -738,7 +765,7 @@ void MarlinSettings::postprocess() {
|
|
|
|
|
// Report storage size
|
|
|
|
|
#if ENABLED(EEPROM_CHITCHAT)
|
|
|
|
|
SERIAL_ECHO_START();
|
|
|
|
|
SERIAL_ECHOPAIR("Settings Stored (", eeprom_size - (EEPROM_OFFSET));
|
|
|
|
|
SERIAL_ECHOPAIR("Settings Stored (", eeprom_size);
|
|
|
|
|
SERIAL_ECHOPAIR(" bytes; crc ", (uint32_t)final_crc);
|
|
|
|
|
SERIAL_ECHOLNPGM(")");
|
|
|
|
|
#endif
|
|
|
|
@ -1196,7 +1223,7 @@ void MarlinSettings::postprocess() {
|
|
|
|
|
if (!validating) (void)gcode.select_coordinate_system(-1); // Go back to machine space
|
|
|
|
|
EEPROM_READ(gcode.coordinate_system); // 27 floats
|
|
|
|
|
#else
|
|
|
|
|
for (uint8_t q = 27; q--;) EEPROM_READ(dummy);
|
|
|
|
|
for (uint8_t q = MAX_COORDINATE_SYSTEMS * XYZ; q--;) EEPROM_READ(dummy);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|