Add G38.4 and G38.5 (#13348)

2.0.x
Michiel Baird 6 years ago committed by Scott Lahteine
parent e4d080e63c
commit b824a517aa

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -114,8 +114,8 @@
#endif #endif
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
bool G38_move = false, uint8_t G38_move; // = 0
G38_endstop_hit = false; bool G38_did_trigger; // = false
#endif #endif
#if ENABLED(DELTA) #if ENABLED(DELTA)

@ -309,8 +309,8 @@ void manage_inactivity(const bool ignore_stepper_queue=false);
#endif #endif
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
extern bool G38_move, // flag to tell the interrupt handler that a G38 command is being run extern uint8_t G38_move; // Flag to tell the ISR that G38 is in progress, and the type
G38_endstop_hit; // flag from the interrupt handler to indicate if the endstop went active extern bool G38_did_trigger; // Flag from the ISR to indicate the endstop changed
#endif #endif
/** /**

@ -258,9 +258,14 @@ void GcodeSuite::process_parsed_command(
#endif #endif
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
case 38: // G38.2 & G38.3: Probe towards target case 38: // G38.2, G38.3: Probe towards target
if (parser.subcode == 2 || parser.subcode == 3) if (WITHIN(parser.subcode, 2,
G38(parser.subcode == 2); #if ENABLED(G38_PROBE_AWAY)
5
#else
3
#endif
)) G38(parser.subcode); // G38.4, G38.5: Probe away from target
break; break;
#endif #endif

@ -415,7 +415,7 @@ private:
#endif #endif
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
static void G38(const bool is_38_2); static void G38(const int8_t subcode);
#endif #endif
#if HAS_MESH #if HAS_MESH

@ -31,7 +31,18 @@
#include "../../module/stepper.h" #include "../../module/stepper.h"
#include "../../module/probe.h" #include "../../module/probe.h"
static bool G38_run_probe() { inline void G38_single_probe(const uint8_t move_value) {
endstops.enable(true);
G38_move = move_value;
prepare_move_to_destination();
planner.synchronize();
G38_move = 0;
endstops.hit_on_purpose();
set_current_from_steppers_for_axis(ALL_AXES);
sync_plan_position();
}
inline bool G38_run_probe() {
bool G38_pass_fail = false; bool G38_pass_fail = false;
@ -46,19 +57,19 @@ static bool G38_run_probe() {
planner.synchronize(); // wait until the machine is idle planner.synchronize(); // wait until the machine is idle
// Move until destination reached or target hit // Move flag value
endstops.enable(true); #if ENABLED(G38_PROBE_AWAY)
G38_move = true; const uint8_t move_value = parser.subcode;
G38_endstop_hit = false; #else
prepare_move_to_destination(); constexpr uint8_t move_value = 1;
planner.synchronize(); #endif
G38_move = false;
endstops.hit_on_purpose(); G38_did_trigger = false;
set_current_from_steppers_for_axis(ALL_AXES);
sync_plan_position(); // Move until destination reached or target hit
G38_single_probe(move_value);
if (G38_endstop_hit) { if (G38_did_trigger) {
G38_pass_fail = true; G38_pass_fail = true;
@ -70,45 +81,50 @@ static bool G38_run_probe() {
prepare_move_to_destination(); prepare_move_to_destination();
planner.synchronize(); planner.synchronize();
feedrate_mm_s /= 4; REMEMBER(fr, feedrate_mm_s, feedrate_mm_s * 0.25);
// Bump the target more slowly // Bump the target more slowly
LOOP_XYZ(i) destination[i] -= retract_mm[i] * 2; LOOP_XYZ(i) destination[i] -= retract_mm[i] * 2;
endstops.enable(true); G38_single_probe(move_value);
G38_move = true;
prepare_move_to_destination();
planner.synchronize();
G38_move = false;
set_current_from_steppers_for_axis(ALL_AXES);
sync_plan_position();
#endif #endif
} }
endstops.hit_on_purpose();
endstops.not_homing(); endstops.not_homing();
return G38_pass_fail; return G38_pass_fail;
} }
/** /**
* G38.2 - probe toward workpiece, stop on contact, signal error if failure * G38 Probe Target
* G38.3 - probe toward workpiece, stop on contact *
* G38.2 - Probe toward workpiece, stop on contact, signal error if failure
* G38.3 - Probe toward workpiece, stop on contact
* *
* Like G28 except uses Z min probe for all axes * With G38_PROBE_AWAY:
*
* G38.4 - Probe away from workpiece, stop on contact break, signal error if failure
* G38.5 - Probe away from workpiece, stop on contact break
*/ */
void GcodeSuite::G38(const bool is_38_2) { void GcodeSuite::G38(const int8_t subcode) {
// Get X Y Z E F // Get X Y Z E F
get_destination_from_command(); get_destination_from_command();
setup_for_endstop_or_probe_move(); setup_for_endstop_or_probe_move();
const bool error_on_fail =
#if ENABLED(G38_PROBE_AWAY)
!TEST(subcode, 0)
#else
(subcode == 2)
#endif
;
// If any axis has enough movement, do the move // If any axis has enough movement, do the move
LOOP_XYZ(i) LOOP_XYZ(i)
if (ABS(destination[i] - current_position[i]) >= G38_MINIMUM_MOVE) { if (ABS(destination[i] - current_position[i]) >= G38_MINIMUM_MOVE) {
if (!parser.seenval('F')) feedrate_mm_s = homing_feedrate((AxisEnum)i); if (!parser.seenval('F')) feedrate_mm_s = homing_feedrate((AxisEnum)i);
// If G38.2 fails throw an error // If G38.2 fails throw an error
if (!G38_run_probe() && is_38_2) SERIAL_ERROR_MSG("Failed to reach target"); if (!G38_run_probe() && error_on_fail) SERIAL_ERROR_MSG("Failed to reach target");
break; break;
} }

@ -672,14 +672,17 @@ void Endstops::update() {
}while(0) }while(0)
#if ENABLED(G38_PROBE_TARGET) && PIN_EXISTS(Z_MIN_PROBE) && !(CORE_IS_XY || CORE_IS_XZ) #if ENABLED(G38_PROBE_TARGET) && PIN_EXISTS(Z_MIN_PROBE) && !(CORE_IS_XY || CORE_IS_XZ)
#if ENABLED(G38_PROBE_AWAY)
#define _G38_OPEN_STATE (G38_move >= 4)
#else
#define _G38_OPEN_STATE LOW
#endif
// If G38 command is active check Z_MIN_PROBE for ALL movement // If G38 command is active check Z_MIN_PROBE for ALL movement
if (G38_move) { if (G38_move && TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE)) != _G38_OPEN_STATE) {
if (TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE))) {
if (stepper.axis_is_moving(X_AXIS)) { _ENDSTOP_HIT(X, MIN); planner.endstop_triggered(X_AXIS); } if (stepper.axis_is_moving(X_AXIS)) { _ENDSTOP_HIT(X, MIN); planner.endstop_triggered(X_AXIS); }
else if (stepper.axis_is_moving(Y_AXIS)) { _ENDSTOP_HIT(Y, MIN); planner.endstop_triggered(Y_AXIS); } else if (stepper.axis_is_moving(Y_AXIS)) { _ENDSTOP_HIT(Y, MIN); planner.endstop_triggered(Y_AXIS); }
else if (stepper.axis_is_moving(Z_AXIS)) { _ENDSTOP_HIT(Z, MIN); planner.endstop_triggered(Z_AXIS); } else if (stepper.axis_is_moving(Z_AXIS)) { _ENDSTOP_HIT(Z, MIN); planner.endstop_triggered(Z_AXIS); }
G38_endstop_hit = true; G38_did_trigger = true;
}
} }
#endif #endif

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1067,11 +1067,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1072,11 +1072,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1076,11 +1076,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1067,11 +1067,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1070,11 +1070,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
#define BEZIER_CURVE_SUPPORT #define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1072,11 +1072,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1073,11 +1073,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
#define BEZIER_CURVE_SUPPORT #define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1076,11 +1076,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1081,11 +1081,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1070,11 +1070,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1070,11 +1070,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1070,11 +1070,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1070,11 +1070,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1070,11 +1070,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1070,11 +1070,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1070,11 +1070,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1070,11 +1070,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1070,11 +1070,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1069,11 +1069,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1070,11 +1070,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1068,11 +1068,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

@ -1069,11 +1069,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
//#define BEZIER_CURVE_SUPPORT //#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target /**
// Set MULTIPLE_PROBING if you want G38 to double touch * G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET //#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET) #if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif #endif
// Moves (or segments) with fewer steps than this will be joined with the next move // Moves (or segments) with fewer steps than this will be joined with the next move

Loading…
Cancel
Save