Less timely comment, tweak conditions

2.0.x
Scott Lahteine 6 years ago
parent eb91f08725
commit b46ca9aa94

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -71,19 +71,17 @@ bool BLTouch::set_deployed(const bool in_deploy) {
}
#if ENABLED(BLTOUCH_V3)
#if ENABLED(BLTOUCH_FORCE_5V_MODE)
set_5V_mode();
#elif ENABLED(BLTOUCH_FORCE_OPEN_DRAIN_MODE)
set_OD_mode();
#elif ENABLED(ENDSTOPPULLUPS) || ALL(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, ENDSTOPPULLUP_ZMIN) || (USES_Z_MIN_PROBE_ENDSTOP && ENABLED(ENDSTOPPULLUP_ZMIN_PROBE))
#if EITHER(BLTOUCH_FORCE_5V_MODE, ENDSTOPPULLUPS) \
|| ALL(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, ENDSTOPPULLUP_ZMIN) \
|| (USES_Z_MIN_PROBE_ENDSTOP && ENABLED(ENDSTOPPULLUP_ZMIN_PROBE))
set_5V_mode(); // Assume 5V DC logic level if endstop pullup resistors are enabled
#else
#elif true || ENABLED(BLTOUCH_FORCE_OPEN_DRAIN_MODE)
set_OD_mode();
#endif
#endif
if (in_deploy) {
_deploy();
#if ENABLED(BLTOUCH_V3)
set_SW_mode();
#endif

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -824,9 +824,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -838,9 +838,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -829,9 +829,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -865,9 +865,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -831,9 +831,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -828,9 +828,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -819,9 +819,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -806,9 +806,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -819,9 +819,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -806,9 +806,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -817,9 +817,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -828,9 +828,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -819,9 +819,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -837,9 +837,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -828,9 +828,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -822,9 +822,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -822,9 +822,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -828,9 +828,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -829,9 +829,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -800,9 +800,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -800,9 +800,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -810,9 +810,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -824,9 +824,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -901,9 +901,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -847,9 +847,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -834,9 +834,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -801,9 +801,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -801,9 +801,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -833,9 +833,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -825,9 +825,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -834,9 +834,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -833,9 +833,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -822,9 +822,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -830,9 +830,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -838,9 +838,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -838,9 +838,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -817,9 +817,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -822,9 +822,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -822,9 +822,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -819,9 +819,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -826,9 +826,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -858,9 +858,10 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -816,9 +816,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -831,9 +831,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -820,9 +820,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -849,9 +849,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -869,9 +869,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -839,9 +839,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -817,9 +817,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -829,9 +829,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -827,9 +827,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -847,9 +847,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -837,9 +837,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -828,9 +828,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -818,9 +818,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -954,9 +954,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -900,9 +900,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -900,9 +900,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -900,9 +900,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -890,9 +890,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -905,9 +905,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -890,9 +890,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -890,9 +890,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -890,9 +890,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -883,9 +883,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -893,9 +893,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -821,9 +821,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -820,9 +820,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -813,9 +813,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

@ -823,9 +823,10 @@
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
/** BLTouch V3.0 and newer smart series
* Functions with most genuine sensors, however clones have been reporting issues with the new code.
* If the pin trigger is not detected, first try swapping black and white wires then toggle this.
/**
* BLTouch V3.0 and newer smart series
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
*/
//#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)

Loading…
Cancel
Save