HAS_TRINAMIC => HAS_TRINAMIC_CONFIG

Marlin/Configuration_adv.h

@@ -2015,7 +2015,7 @@
  * TMCStepper library is required to use TMC stepper drivers.
  * https://github.com/teemuatlut/TMCStepper
  */
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
 
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
   #define INTERPOLATE       true  // Interpolate X/Y/Z_MICROSTEPS to 256
@@ -2345,7 +2345,7 @@
    */
   #define TMC_ADV() {  }
 
-#endif // HAS_TRINAMIC
+#endif // HAS_TRINAMIC_CONFIG
 
 // @section L64XX
 

Marlin/src/HAL/HAL_AVR/inc/SanityCheck.h

@@ -56,7 +56,7 @@
 /**
  * The Trinamic library includes SoftwareSerial.h, leading to a compile error.
  */
-#if HAS_TRINAMIC && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
+#if HAS_TRINAMIC_CONFIG && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
   #error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
 #endif
 

Marlin/src/MarlinCore.cpp

@@ -110,7 +110,7 @@
   #include "feature/I2CPositionEncoder.h"
 #endif
 
-#if HAS_TRINAMIC && DISABLED(PSU_DEFAULT_OFF)
+#if HAS_TRINAMIC_CONFIG && DISABLED(PSU_DEFAULT_OFF)
   #include "feature/tmc_util.h"
 #endif
 
@@ -1162,7 +1162,7 @@ void setup() {
     host_action_prompt_end();
   #endif
 
-  #if HAS_TRINAMIC && DISABLED(PSU_DEFAULT_OFF)
+  #if HAS_TRINAMIC_CONFIG && DISABLED(PSU_DEFAULT_OFF)
     test_tmc_connection(true, true, true, true);
   #endif
 

Marlin/src/core/drivers.h

@@ -90,7 +90,7 @@
 
 // Test for supported TMC drivers that require advanced configuration
 // Does not match standalone configurations
-#define HAS_TRINAMIC (    HAS_DRIVER(TMC2130) \
+#define HAS_TRINAMIC_CONFIG (    HAS_DRIVER(TMC2130) \
                               || HAS_DRIVER(TMC2160) \
                               || HAS_DRIVER(TMC2208) \
                               || HAS_DRIVER(TMC2209) \

Marlin/src/feature/power.cpp

@@ -108,7 +108,7 @@ void Power::power_on() {
   if (!powersupply_on) {
     PSU_PIN_ON();
 
-    #if HAS_TRINAMIC
+    #if HAS_TRINAMIC_CONFIG
       delay(PSU_POWERUP_DELAY); // Wait for power to settle
       restore_stepper_drivers();
     #endif

Marlin/src/feature/tmc_util.cpp

@@ -22,7 +22,7 @@
 
 #include "../inc/MarlinConfig.h"
 
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
 
 #include "tmc_util.h"
 #include "../MarlinCore.h"
@@ -954,7 +954,7 @@
     static void tmc_get_ic_registers(TMC2208Stepper, const TMC_get_registers_enum) { SERIAL_CHAR('\t'); }
   #endif
 
-  #if HAS_TRINAMIC
+  #if HAS_TRINAMIC_CONFIG
     template<class TMC>
     static void tmc_get_registers(TMC &st, const TMC_get_registers_enum i) {
       switch (i) {
@@ -1257,4 +1257,4 @@ void test_tmc_connection(const bool test_x, const bool test_y, const bool test_z
   if (axis_connection) ui.set_status_P(GET_TEXT(MSG_ERROR_TMC));
 }
 
-#endif // HAS_TRINAMIC
+#endif // HAS_TRINAMIC_CONFIG

Marlin/src/feature/tmc_util.h

@@ -24,7 +24,7 @@
 #include "../inc/MarlinConfig.h"
 #include "../lcd/ultralcd.h"
 
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
 
 #include <TMCStepper.h>
 #include "../module/planner.h"
@@ -400,4 +400,4 @@ void test_tmc_connection(const bool test_x, const bool test_y, const bool test_z
   void tmc_init_cs_pins();
 #endif
 
-#endif // HAS_TRINAMIC
+#endif // HAS_TRINAMIC_CONFIG

Marlin/src/gcode/control/M80_M81.cpp

@@ -44,7 +44,7 @@
   // Could be moved to a feature, but this is all the data
   bool powersupply_on;
 
-  #if HAS_TRINAMIC
+  #if HAS_TRINAMIC_CONFIG
     #include "../../feature/tmc_util.h"
   #endif
 

Marlin/src/gcode/feature/trinamic/M122.cpp

@@ -22,7 +22,7 @@
 
 #include "../../../inc/MarlinConfig.h"
 
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
 
 #include "../../gcode.h"
 #include "../../../feature/tmc_util.h"
@@ -53,4 +53,4 @@ void GcodeSuite::M122() {
   test_tmc_connection(print_axis.x, print_axis.y, print_axis.z, print_axis.e);
 }
 
-#endif // HAS_TRINAMIC
+#endif // HAS_TRINAMIC_CONFIG

Marlin/src/gcode/feature/trinamic/M906.cpp

@@ -22,7 +22,7 @@
 
 #include "../../../inc/MarlinConfig.h"
 
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
 
 #include "../../gcode.h"
 #include "../../../feature/tmc_util.h"
@@ -170,4 +170,4 @@ void GcodeSuite::M906() {
   }
 }
 
-#endif // HAS_TRINAMIC
+#endif // HAS_TRINAMIC_CONFIG

Marlin/src/gcode/feature/trinamic/M911-M914.cpp

@@ -22,7 +22,7 @@
 
 #include "../../../inc/MarlinConfig.h"
 
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
 
 #include "../../gcode.h"
 #include "../../../feature/tmc_util.h"
@@ -426,4 +426,4 @@
   }
 #endif // USE_SENSORLESS
 
-#endif // HAS_TRINAMIC
+#endif // HAS_TRINAMIC_CONFIG

Marlin/src/gcode/gcode.cpp

@@ -785,7 +785,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         #endif
       #endif
 
-      #if HAS_TRINAMIC
+      #if HAS_TRINAMIC_CONFIG
         case 122: M122(); break;                                  // M122: Report driver configuration and status
         case 906: M906(); break;                                  // M906: Set motor current in milliamps using axis codes X, Y, Z, E
         #if HAS_STEALTHCHOP

Marlin/src/gcode/gcode.h

@@ -912,7 +912,7 @@ private:
     static void M900();
   #endif
 
-  #if HAS_TRINAMIC
+  #if HAS_TRINAMIC_CONFIG
     static void M122();
     static void M906();
     #if HAS_STEALTHCHOP

Marlin/src/inc/Conditionals_adv.h

@@ -196,7 +196,7 @@
     #define MINIMUM_STEPPER_POST_DIR_DELAY 400
   #elif HAS_DRIVER(A4988)
     #define MINIMUM_STEPPER_POST_DIR_DELAY 200
-  #elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
+  #elif HAS_TRINAMIC_CONFIG || HAS_TRINAMIC_STANDALONE
     #define MINIMUM_STEPPER_POST_DIR_DELAY 20
   #else
     #define MINIMUM_STEPPER_POST_DIR_DELAY 0   // Expect at least 10µS since one Stepper ISR must transpire
@@ -216,7 +216,7 @@
     #define MINIMUM_STEPPER_PULSE 2
   #elif HAS_DRIVER(A4988) || HAS_DRIVER(A5984)
     #define MINIMUM_STEPPER_PULSE 1
-  #elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
+  #elif HAS_TRINAMIC_CONFIG || HAS_TRINAMIC_STANDALONE
     #define MINIMUM_STEPPER_PULSE 0
   #elif HAS_DRIVER(LV8729)
     #define MINIMUM_STEPPER_PULSE 0
@@ -236,7 +236,7 @@
     #define MAXIMUM_STEPPER_RATE 500000
   #elif HAS_DRIVER(LV8729)
     #define MAXIMUM_STEPPER_RATE 1000000
-  #elif HAS_TRINAMIC || HAS_TRINAMIC_STANDALONE
+  #elif HAS_TRINAMIC_CONFIG || HAS_TRINAMIC_STANDALONE
     #define MAXIMUM_STEPPER_RATE 5000000
   #else
     #define MAXIMUM_STEPPER_RATE 250000

Marlin/src/inc/Conditionals_post.h

@@ -1290,7 +1290,7 @@
 #define HAS_SOLENOID_7    (PIN_EXISTS(SOL7))
 
 // Trinamic Stepper Drivers
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
   #define STEALTHCHOP_ENABLED ANY(STEALTHCHOP_XY, STEALTHCHOP_Z, STEALTHCHOP_E)
   #define USE_SENSORLESS EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
   // Disable Z axis sensorless homing if a probe is used to home the Z axis

Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/advanced_settings_menu.cpp

@@ -58,13 +58,13 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) {
       .tag(16).button( BTN_POS(1,6),  BTN_SIZE(1,1), GET_TEXT_F(MSG_CASE_LIGHT))
       .tag(3) .button( BTN_POS(2,1), BTN_SIZE(1,1), GET_TEXT_F(MSG_STEPS_PER_MM))
       .enabled(
-        #if HAS_TRINAMIC
+        #if HAS_TRINAMIC_CONFIG
           1
         #endif
       )
       .tag(13).button( BTN_POS(1,4), BTN_SIZE(1,1), GET_TEXT_F(MSG_TMC_CURRENT))
       .enabled(
-        #if HAS_TRINAMIC
+        #if HAS_TRINAMIC_CONFIG
           1
         #endif
       )
@@ -120,13 +120,13 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) {
       .enabled(1)
       .tag(3) .button( BTN_POS(2,1),  BTN_SIZE(1,1), GET_TEXT_F(MSG_STEPS_PER_MM))
       .enabled(
-        #if HAS_TRINAMIC
+        #if HAS_TRINAMIC_CONFIG
           1
         #endif
       )
       .tag(13).button( BTN_POS(3,1), BTN_SIZE(1,1), GET_TEXT_F(MSG_TMC_CURRENT))
       .enabled(
-        #if HAS_TRINAMIC
+        #if HAS_TRINAMIC_CONFIG
           1
         #endif
       )
@@ -189,7 +189,7 @@ bool AdvancedSettingsMenu::onTouchEnd(uint8_t tag) {
     case 11: GOTO_SCREEN(FilamentMenu); break;
     #endif
     case 12: GOTO_SCREEN(EndstopStatesScreen); break;
-    #if HAS_TRINAMIC
+    #if HAS_TRINAMIC_CONFIG
     case 13: GOTO_SCREEN(StepperCurrentScreen); break;
     case 14: GOTO_SCREEN(StepperBumpSensitivityScreen); break;
     #endif

Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/bio_advanced_settings.cpp

@@ -45,13 +45,13 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) {
 
       .tag(2) .button( BTN_POS(1,1), BTN_SIZE(1,1), GET_TEXT_F(MSG_DISPLAY_MENU))
       .enabled(
-        #if HAS_TRINAMIC
+        #if HAS_TRINAMIC_CONFIG
           1
         #endif
       )
       .tag(3) .button( BTN_POS(1,2), BTN_SIZE(1,1), GET_TEXT_F(MSG_TMC_CURRENT))
       .enabled(
-        #if HAS_TRINAMIC
+        #if HAS_TRINAMIC_CONFIG
           1
         #endif
       )
@@ -100,7 +100,7 @@ bool AdvancedSettingsMenu::onTouchEnd(uint8_t tag) {
   switch (tag) {
     case 1: SaveSettingsDialogBox::promptToSaveSettings(); break;
     case 2: GOTO_SCREEN(DisplayTuningScreen);              break;
-    #if HAS_TRINAMIC
+    #if HAS_TRINAMIC_CONFIG
     case 3: GOTO_SCREEN(StepperCurrentScreen);             break;
     case 4: GOTO_SCREEN(StepperBumpSensitivityScreen);     break;
     #endif

Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/screens.cpp

@@ -58,7 +58,7 @@ SCREEN_TABLE {
 #endif
   DECL_SCREEN(MoveAxisScreen),
   DECL_SCREEN(StepsScreen),
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
   DECL_SCREEN(StepperCurrentScreen),
   DECL_SCREEN(StepperBumpSensitivityScreen),
 #endif

Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/screens.h

@@ -455,7 +455,7 @@ class StepsScreen : public BaseNumericAdjustmentScreen, public CachedScreen<STEP
     static bool onTouchHeld(uint8_t tag);
 };
 
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
   class StepperCurrentScreen : public BaseNumericAdjustmentScreen, public CachedScreen<STEPPER_CURRENT_SCREEN_CACHE> {
     public:
       static void onRedraw(draw_mode_t);

Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/stepper_bump_sensitivity_screen.cpp

@@ -22,7 +22,7 @@
 
 #include "../config.h"
 
-#if ENABLED(TOUCH_UI_FTDI_EVE) && HAS_TRINAMIC
+#if ENABLED(TOUCH_UI_FTDI_EVE) && HAS_TRINAMIC_CONFIG
 
 #include "screens.h"
 
@@ -74,4 +74,4 @@ bool StepperBumpSensitivityScreen::onTouchHeld(uint8_t tag) {
   return true;
 }
 
-#endif // TOUCH_UI_FTDI_EVE && HAS_TRINAMIC
+#endif // TOUCH_UI_FTDI_EVE && HAS_TRINAMIC_CONFIG

Marlin/src/lcd/extensible_ui/lib/ftdi_eve_touch_ui/screens/stepper_current_screen.cpp

@@ -22,7 +22,7 @@
 
 #include "../config.h"
 
-#if ENABLED(TOUCH_UI_FTDI_EVE) && HAS_TRINAMIC
+#if ENABLED(TOUCH_UI_FTDI_EVE) && HAS_TRINAMIC_CONFIG
 
 #include "screens.h"
 

Marlin/src/lcd/extensible_ui/ui_api.cpp

@@ -75,7 +75,7 @@
   #define IFSD(A,B) (B)
 #endif
 
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
   #include "../../feature/tmc_util.h"
   #include "../../module/stepper/indirection.h"
 #endif
@@ -445,7 +445,7 @@ namespace ExtUI {
     void setSoftEndstopState(const bool value) { soft_endstops_enabled = value; }
   #endif
 
-  #if HAS_TRINAMIC
+  #if HAS_TRINAMIC_CONFIG
     float getAxisCurrent_mA(const axis_t axis) {
       switch (axis) {
         #if AXIS_IS_TMC(X)

Marlin/src/lcd/extensible_ui/ui_api.h

@@ -97,7 +97,7 @@ namespace ExtUI {
     void setSoftEndstopState(const bool);
   #endif
 
-  #if HAS_TRINAMIC
+  #if HAS_TRINAMIC_CONFIG
     float getAxisCurrent_mA(const axis_t);
     float getAxisCurrent_mA(const extruder_t);
     void  setAxisCurrent_mA(const float, const axis_t);

Marlin/src/lcd/menu/menu_advanced.cpp

@@ -544,7 +544,7 @@ void menu_advanced_settings() {
     SUBMENU(MSG_DRIVE_STRENGTH, menu_pwm);
   #endif
 
-  #if HAS_TRINAMIC
+  #if HAS_TRINAMIC_CONFIG
     SUBMENU(MSG_TMC_DRIVERS, menu_tmc);
   #endif
 

Marlin/src/lcd/menu/menu_tmc.cpp

@@ -26,7 +26,7 @@
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_TRINAMIC && HAS_LCD_MENU
+#if HAS_TRINAMIC_CONFIG && HAS_LCD_MENU
 
 #include "menu.h"
 #include "../../module/stepper/indirection.h"
@@ -249,4 +249,4 @@ void menu_tmc() {
   END_MENU();
 }
 
-#endif // HAS_TRINAMIC
+#endif // HAS_TRINAMIC_CONFIG

Marlin/src/lcd/ultralcd.cpp

@@ -103,7 +103,7 @@ MarlinUI ui;
   #include "../feature/bedlevel/bedlevel.h"
 #endif
 
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
   #include "../feature/tmc_util.h"
 #endif
 

Marlin/src/module/configuration_store.cpp

@@ -113,7 +113,7 @@
   #include "../feature/bltouch.h"
 #endif
 
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
   #include "stepper/indirection.h"
   #include "../feature/tmc_util.h"
 #endif
@@ -313,7 +313,7 @@ typedef struct SettingsDataStruct {
   float planner_filament_size[EXTRUDERS];               // M200 T D  planner.filament_size[]
 
   //
-  // HAS_TRINAMIC
+  // HAS_TRINAMIC_CONFIG
   //
   tmc_stepper_current_t tmc_stepper_current;            // M906 X Y Z X2 Y2 Z2 Z3 Z4 E0 E1 E2 E3 E4 E5
   tmc_hybrid_threshold_t tmc_hybrid_threshold;          // M913 X Y Z X2 Y2 Z2 Z3 Z4 E0 E1 E2 E3 E4 E5
@@ -985,7 +985,7 @@ void MarlinSettings::postprocess() {
 
       tmc_stepper_current_t tmc_stepper_current = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
 
-      #if HAS_TRINAMIC
+      #if HAS_TRINAMIC_CONFIG
         #if AXIS_IS_TMC(X)
           tmc_stepper_current.X = stepperX.getMilliamps();
         #endif
@@ -1862,7 +1862,7 @@ void MarlinSettings::postprocess() {
         tmc_stepper_current_t currents;
         EEPROM_READ(currents);
 
-        #if HAS_TRINAMIC
+        #if HAS_TRINAMIC_CONFIG
 
           #define SET_CURR(Q) stepper##Q.rms_current(currents.Q ? currents.Q : Q##_CURRENT)
           if (!validating) {
@@ -2034,7 +2034,7 @@ void MarlinSettings::postprocess() {
         tmc_stealth_enabled_t tmc_stealth_enabled;
         EEPROM_READ(tmc_stealth_enabled);
 
-        #if HAS_TRINAMIC
+        #if HAS_TRINAMIC_CONFIG
 
           #define SET_STEPPING_MODE(ST) stepper##ST.stored.stealthChop_enabled = tmc_stealth_enabled.ST; stepper##ST.refresh_stepping_mode();
           if (!validating) {
@@ -2788,7 +2788,7 @@ void MarlinSettings::reset() {
   #define CONFIG_ECHO_MSG(STR)      do{ CONFIG_ECHO_START(); SERIAL_ECHOLNPGM(STR); }while(0)
   #define CONFIG_ECHO_HEADING(STR)  config_heading(forReplay, PSTR(STR))
 
-  #if HAS_TRINAMIC
+  #if HAS_TRINAMIC_CONFIG
     inline void say_M906(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM("  M906"); }
     #if HAS_STEALTHCHOP
       void say_M569(const bool forReplay, const char * const etc=nullptr, const bool newLine = false) {
@@ -3298,7 +3298,7 @@ void MarlinSettings::reset() {
       #endif
     #endif
 
-    #if HAS_TRINAMIC
+    #if HAS_TRINAMIC_CONFIG
 
       /**
        * TMC stepper driver current
@@ -3599,7 +3599,7 @@ void MarlinSettings::reset() {
 
       #endif // HAS_STEALTHCHOP
 
-    #endif // HAS_TRINAMIC
+    #endif // HAS_TRINAMIC_CONFIG
 
     /**
      * Linear Advance

Marlin/src/module/stepper/indirection.cpp

@@ -33,7 +33,7 @@
 #include "indirection.h"
 
 void restore_stepper_drivers() {
-  #if HAS_TRINAMIC
+  #if HAS_TRINAMIC_CONFIG
     restore_trinamic_drivers();
   #endif
 }
@@ -47,7 +47,7 @@ void reset_stepper_drivers() {
     L64xxManager.init_to_defaults();
   #endif
 
-  #if HAS_TRINAMIC
+  #if HAS_TRINAMIC_CONFIG
     reset_trinamic_drivers();
   #endif
 }

Marlin/src/module/stepper/indirection.h

@@ -40,7 +40,7 @@
   #include "TMC26X.h"
 #endif
 
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
   #include "trinamic.h"
 #endif
 

Marlin/src/module/stepper/trinamic.cpp

@@ -27,7 +27,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
 
 #include "trinamic.h"
 #include "../stepper.h"
@@ -818,4 +818,4 @@ void reset_trinamic_drivers() {
   stepper.set_directions();
 }
 
-#endif // HAS_TRINAMIC
+#endif // HAS_TRINAMIC_CONFIG

Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h

@@ -103,7 +103,7 @@
 
 // Trinamic driver support
 
-#if HAS_TRINAMIC
+#if HAS_TRINAMIC_CONFIG
   // Using TMC devices in intelligent mode requires extra connections to each device. Unfortunately
   // the SKR does not have many free pins (especially if a display is in use). The SPI-based devices
   // will require 3 connections (clock, mosi, miso), plus a chip select line (CS) for each driver.