Fix indentation, whitespace, spelling, formbot pins...

2.0.x
Scott Lahteine 6 years ago
parent b5537dde7f
commit ad12b9b46b

@ -75,7 +75,7 @@
#define BOARD_AZTEEG_X3_PRO 68 // Azteeg X3 Pro
#define BOARD_ULTIMAIN_2 72 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
#define BOARD_RUMBA 80 // Rumba
#define BOARD_FORMBOT 81 // Formbot version 1. A Rumba derivitive
#define BOARD_FORMBOT 81 // Formbot version 1. (A Rumba derivative)
#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D
#define BOARD_MAKEBOARD_MINI 431 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
#define BOARD_TRIGORILLA_13 343 // TriGorilla Anycubic version 1.3 based on RAMPS EFB

@ -77,6 +77,8 @@ void set_bed_leveling_enabled(const bool enable/*=true*/) {
if (can_change && enable != planner.leveling_active) {
planner.synchronize();
#if ENABLED(MESH_BED_LEVELING)
if (!enable)

@ -513,7 +513,6 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
#endif
#if HAS_LEVELING
planner.synchronize();
// Restore leveling to re-establish the logical position
set_bed_leveling_enabled(leveling_was_active);
#endif

@ -35,8 +35,6 @@
#define DEFAULT_MACHINE_NAME "Formbot"
#define BOARD_NAME "Formbot"
#define LARGE_FLASH true
//
// Servos
//
@ -64,35 +62,43 @@
#define Z_MIN_PROBE_PIN 32
#endif
#define SLED_PIN -1
//
// Steppers
//
#define X_STEP_PIN 54
#define X_DIR_PIN 55
#define X_ENABLE_PIN 38
#define X_CS_PIN 53
#ifndef X_CS_PIN
#define X_CS_PIN 53
#endif
#define Y_STEP_PIN 60
#define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56
#define Y_CS_PIN 49
#ifndef Y_CS_PIN
#define Y_CS_PIN 49
#endif
#define Z_STEP_PIN 46
#define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62
#define Z_CS_PIN 40
#ifndef Z_CS_PIN
#define Z_CS_PIN 40
#endif
#define E0_STEP_PIN 26
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 24
#define E0_CS_PIN 42
#ifndef E0_CS_PIN
#define E0_CS_PIN 42
#endif
#define E1_STEP_PIN 36
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
#define E1_CS_PIN 44
#ifndef E1_CS_PIN
#define E1_CS_PIN 44
#endif
#define E2_STEP_PIN 42
#define E2_DIR_PIN 43
@ -137,10 +143,10 @@
#define HEATER_BED_PIN 58
#define LED4_PIN 8
#define LASER_PIN -1
#define FAN_PIN 9
#if(!ENABLED(FilamentSensor))
#if !ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FAN1_PIN 4
#endif
@ -153,32 +159,26 @@
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
#define FILWIDTH_PIN 5 // Analog Input
#define PS_ON_PIN 12
#ifndef PS_ON_PIN
#define PS_ON_PIN 12
#endif
//
// LCD / Controller
//
// Formbot boards only support the use of the REPRAP_DISCOUNT_SMART_CONTROLLER LCD Panel
// Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER
//
#if ENABLED(ULTRA_LCD)
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define LCD_PINS_RS 16
#define LCD_PINS_ENABLE 17
#define LCD_PINS_D4 23
#define LCD_PINS_D5 25
#define LCD_PINS_D6 27
#define LCD_PINS_D7 29
#if ENABLED(NEWPANEL)
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 37
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
#define SD_DETECT_PIN 49
#define KILL_PIN 41
#endif
#endif // NEWPANEL
#endif // ULTRA_LCD
#endif

Loading…
Cancel
Save