Use preheat labels in place of PLA/ABS (#12194)

2.0.x
Ludy 6 years ago committed by Scott Lahteine
parent aa72884a6e
commit a93e9e6e9b

@ -1632,10 +1632,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1632,10 +1632,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1637,10 +1637,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1639,10 +1639,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1634,10 +1634,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -10,7 +10,7 @@ The Einstart S is a commercial machine that ships with a proprietary firmware an
- Genuine Minebea NEMA17 motors (200 steps/rev)
- THC7128 3A Stepper Drivers (configured for 16 microsteps, loud)
- 160x160 magnetically coupled non-heated bed
- PLA Only Direct Drive extruder
- PLA-only, Direct Drive extruder
- SH1106 OLED Display w/ Cardinal navigation
- 9533 I2C PWM RGB LED Chassis illumination
- Onboard SD-Card Support

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1619,10 +1619,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1639,10 +1639,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1644,10 +1644,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1633,10 +1633,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1633,10 +1633,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1633,10 +1633,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1633,10 +1633,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1633,10 +1633,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1633,10 +1633,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1633,10 +1633,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1633,10 +1633,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1631,10 +1631,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -1632,10 +1632,10 @@
#define USER_DESC_1 "Home & UBL Info"
#define USER_GCODE_1 "G28\nG29 W"
#define USER_DESC_2 "Preheat for PLA"
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define USER_DESC_3 "Preheat for ABS"
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define USER_DESC_4 "Heat Bed/Home/Level"

@ -30,7 +30,7 @@
/**
* M145: Set the heatup state for a material in the LCD menu
*
* S<material> (0=PLA, 1=ABS)
* S<material>
* H<hotend temp>
* B<bed temp>
* F<fan speed>

@ -525,7 +525,7 @@
#endif
#ifndef PREHEAT_2_LABEL
#define PREHEAT_1_LABEL "ABS"
#define PREHEAT_2_LABEL "ABS"
#endif
/**

@ -52,12 +52,12 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Achustar desfases")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Desfase aplicau")
#define MSG_SET_ORIGIN _UxGT("Establir orichen")
#define MSG_PREHEAT_1 _UxGT("Precalentar PLA")
#define MSG_PREHEAT_1 _UxGT("Precalentar " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tot")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Base")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Conf")
#define MSG_PREHEAT_2 _UxGT("Precalentar ABS")
#define MSG_PREHEAT_2 _UxGT("Precalentar " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tot")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Base")

@ -43,16 +43,16 @@
#define MSG_TMC_Z_CALIBRATION _UxGT("Калибровка Z")
#define MSG_SET_HOME_OFFSETS _UxGT("Задай Начало")
#define MSG_SET_ORIGIN _UxGT("Изходна точка")
#define MSG_PREHEAT_1 _UxGT("Подгряване PLA")
#define MSG_PREHEAT_1_N _UxGT("Подгряване PLA")
#define MSG_PREHEAT_1_ALL _UxGT("Подгр. PLA Всички")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Подгр. PLA Легло")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Настройки PLA")
#define MSG_PREHEAT_2 _UxGT("Подгряване ABS")
#define MSG_PREHEAT_2_N _UxGT("Подгряване ABS")
#define MSG_PREHEAT_2_ALL _UxGT("Подгр. ABS Всички")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Подгр. ABS Легло")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Настройки ABS")
#define MSG_PREHEAT_1 _UxGT("Подгряване " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N _UxGT("Подгряване " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_ALL _UxGT("Подгр. " PREHEAT_1_LABEL " Всички")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Подгр. " PREHEAT_1_LABEL " Легло")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Настройки " PREHEAT_1_LABEL)
#define MSG_PREHEAT_2 _UxGT("Подгряване " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N _UxGT("Подгряване " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_ALL _UxGT("Подгр. " PREHEAT_2_LABEL " Всички")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Подгр. " PREHEAT_2_LABEL " Легло")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Настройки " PREHEAT_2_LABEL)
#define MSG_COOLDOWN _UxGT("Охлаждане")
#define MSG_SWITCH_PS_ON _UxGT("Вкл. захранване")
#define MSG_SWITCH_PS_OFF _UxGT("Изкл. захранване")

@ -53,12 +53,12 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Ajusta decalatge")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Decalatge aplicat")
#define MSG_SET_ORIGIN _UxGT("Estableix origen")
#define MSG_PREHEAT_1 _UxGT("Preescalfa PLA")
#define MSG_PREHEAT_1 _UxGT("Preescalfa " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tot")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Llit")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Conf.")
#define MSG_PREHEAT_2 _UxGT("Preescalfa ABS")
#define MSG_PREHEAT_2 _UxGT("Preescalfa " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tot")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Llit")

@ -62,13 +62,13 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Nastavit ofsety")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Ofsety nastaveny")
#define MSG_SET_ORIGIN _UxGT("Nastavit počátek")
#define MSG_PREHEAT_1 _UxGT("Zahřát PLA")
#define MSG_PREHEAT_1 _UxGT("Zahřát " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" vše")
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" hotend")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" podlož")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" nast")
#define MSG_PREHEAT_2 _UxGT("Zahřát ABS")
#define MSG_PREHEAT_2 _UxGT("Zahřát " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" vše")
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" hotend")
@ -97,25 +97,25 @@
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Přesun na další")
#define MSG_UBL_ACTIVATE_MESH _UxGT("Aktivovat UBL")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Deaktivovat UBL")
#define MSG_UBL_SET_BED_TEMP _UxGT("Teplota podložky")
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Teplota hotendu")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_SET_TEMP_BED _UxGT("Teplota podložky")
#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Teplota hotendu")
#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
#define MSG_UBL_MESH_EDIT _UxGT("Úprava sítě bodů")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Upravit vlastní síť")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Doladit síť bodů")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Konec úprav sítě")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Vlastní síť")
#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Vlastní síť")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Vytvořit síť")
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Síť bodu PLA")
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Síť bodu ABS")
#define MSG_UBL_BUILD_MESH_M1 _UxGT("Síť bodu " PREHEAT_1_LABEL)
#define MSG_UBL_BUILD_MESH_M2 _UxGT("Síť bodu " PREHEAT_2_LABEL)
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Studená síť bodů")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Upravit výšku sítě")
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Výška")
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Zkontrolovat síť")
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Kontrola sítě PLA")
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Kontrola sítě ABS")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Kontrola vlast. sítě")
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Kontrola sítě " PREHEAT_1_LABEL)
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Kontrola sítě " PREHEAT_2_LABEL)
#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Kontrola vlast. sítě")
#define MSG_UBL_CONTINUE_MESH _UxGT("Pokračovat v síťi")
#define MSG_UBL_MESH_LEVELING _UxGT("Síťové rovnání")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-bodove rovnání")

@ -52,16 +52,16 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Sæt forsk. af home")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Forsk. er nu aktiv")
#define MSG_SET_ORIGIN _UxGT("Sæt origin")
#define MSG_PREHEAT_1 _UxGT("Forvarm PLA")
#define MSG_PREHEAT_1_N _UxGT("Forvarm PLA ")
#define MSG_PREHEAT_1_ALL _UxGT("Forvarm PLA Alle")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Forvarm PLA Bed")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Forvarm PLA conf")
#define MSG_PREHEAT_2 _UxGT("Forvarm ABS")
#define MSG_PREHEAT_2_N _UxGT("Forvarm ABS ")
#define MSG_PREHEAT_2_ALL _UxGT("Forvarm ABS Alle")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Forvarm ABS Bed")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Forvarm ABS conf")
#define MSG_PREHEAT_1 _UxGT("Forvarm " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N _UxGT("Forvarm " PREHEAT_1_LABEL " ")
#define MSG_PREHEAT_1_ALL _UxGT("Forvarm " PREHEAT_1_LABEL " Alle")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Forvarm " PREHEAT_1_LABEL " Bed")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Forvarm " PREHEAT_1_LABEL " conf")
#define MSG_PREHEAT_2 _UxGT("Forvarm " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N _UxGT("Forvarm " PREHEAT_2_LABEL " ")
#define MSG_PREHEAT_2_ALL _UxGT("Forvarm " PREHEAT_2_LABEL " Alle")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Forvarm " PREHEAT_2_LABEL " Bed")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Forvarm " PREHEAT_2_LABEL " conf")
#define MSG_COOLDOWN _UxGT("Afkøl")
#define MSG_SWITCH_PS_ON _UxGT("Slå strøm til")
#define MSG_SWITCH_PS_OFF _UxGT("Slå strøm fra")

@ -60,18 +60,18 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Setze Homeversatz")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Homeversatz aktiv")
#define MSG_SET_ORIGIN _UxGT("Setze Nullpunkte") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
#define MSG_PREHEAT_1 _UxGT("Vorwärmen PLA")
#define MSG_PREHEAT_1_N _UxGT("Vorwärmen PLA ")
#define MSG_PREHEAT_1_ALL _UxGT("Vorw. PLA Alles")
#define MSG_PREHEAT_1_END _UxGT("Vorw. PLA Extr.")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. PLA Bett")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. PLA Einst.")
#define MSG_PREHEAT_2 _UxGT("Vorwärmen ABS")
#define MSG_PREHEAT_2_N _UxGT("Vorwärmen ABS ")
#define MSG_PREHEAT_2_ALL _UxGT("Vorw. ABS Alles")
#define MSG_PREHEAT_2_END _UxGT("Vorw. ABS Extr.")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. ABS Bett")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. ABS Einst.")
#define MSG_PREHEAT_1 _UxGT("Vorwärmen " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N _UxGT("Vorwärmen " PREHEAT_1_LABEL " ")
#define MSG_PREHEAT_1_ALL _UxGT("Vorw. " PREHEAT_1_LABEL " Alles")
#define MSG_PREHEAT_1_END _UxGT("Vorw. " PREHEAT_1_LABEL " Extr.")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Vorw. " PREHEAT_1_LABEL " Bett")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Vorw. " PREHEAT_1_LABEL " Einst.")
#define MSG_PREHEAT_2 _UxGT("Vorwärmen " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N _UxGT("Vorwärmen " PREHEAT_2_LABEL " ")
#define MSG_PREHEAT_2_ALL _UxGT("Vorw. " PREHEAT_2_LABEL " Alles")
#define MSG_PREHEAT_2_END _UxGT("Vorw. " PREHEAT_2_LABEL " Extr.")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Vorw. " PREHEAT_2_LABEL " Bett")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Vorw. " PREHEAT_2_LABEL " Einst.")
#define MSG_PREHEAT_CUSTOM _UxGT("benutzerdef. Heizen")
#define MSG_COOLDOWN _UxGT("Abkühlen")
#define MSG_SWITCH_PS_ON _UxGT("Netzteil ein")
@ -105,25 +105,25 @@
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Nächster Punkt...")
#define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktivieren")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL deaktivieren")
#define MSG_UBL_SET_BED_TEMP _UxGT("Betttemperatur")
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend-Temp.")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_SET_TEMP_BED _UxGT("Betttemperatur")
#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Hotend-Temp.")
#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
#define MSG_UBL_MESH_EDIT _UxGT("Netz bearbeiten")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Eigenes Netz bearb.")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Feineinstellung...")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Bearbeitung beendet")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Eigenes Netz erst.")
#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Eigenes Netz erst.")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Netz erstellen")
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Netz erstellen PLA")
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Netz erstellen ABS")
#define MSG_UBL_BUILD_MESH_M1 _UxGT("Netz erstellen " PREHEAT_1_LABEL)
#define MSG_UBL_BUILD_MESH_M2 _UxGT("Netz erstellen " PREHEAT_2_LABEL)
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Netz erstellen kalt")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Netzhöhe einst.")
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Höhe")
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Netz validieren")
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Netz validieren PLA")
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Netz validieren ABS")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Eig. Netz validieren")
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Netz validieren " PREHEAT_1_LABEL)
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Netz validieren " PREHEAT_2_LABEL)
#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Eig. Netz validieren")
#define MSG_UBL_CONTINUE_MESH _UxGT("Netzerst. forts.")
#define MSG_UBL_MESH_LEVELING _UxGT("Netz-Nivellierung")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Punkt-Nivell.")

@ -52,12 +52,12 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Ορισμός βασικών μετατοπίσεων")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Εφαρμόστηκαν οι μετατοπίσεις")
#define MSG_SET_ORIGIN _UxGT("Ορισμός προέλευσης")
#define MSG_PREHEAT_1 _UxGT("Προθέρμανση PLA")
#define MSG_PREHEAT_1 _UxGT("Προθέρμανση " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" όλα")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" κλίνη")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" επιβεβαίωση")
#define MSG_PREHEAT_2 _UxGT("Προθέρμανση ABS")
#define MSG_PREHEAT_2 _UxGT("Προθέρμανση " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" όλα")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed")

@ -52,12 +52,12 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Ορισμός βασικών μετατοπίσεων") //SHORTEN
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Εφαρμόστηκαν οι μετατοπίσεις") //SHORTEN
#define MSG_SET_ORIGIN _UxGT("Ορισμός προέλευσης")
#define MSG_PREHEAT_1 _UxGT("Προθέρμανση PLA")
#define MSG_PREHEAT_1 _UxGT("Προθέρμανση " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" όλα")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" bed") //SHORTEN
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" επιβεβαίωση") //SHORTEN
#define MSG_PREHEAT_2 _UxGT("Προθέρμανση ABS")
#define MSG_PREHEAT_2 _UxGT("Προθέρμανση " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" όλα")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" bed") //SHORTEN

@ -253,17 +253,17 @@
#ifndef MSG_UBL_DEACTIVATE_MESH
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Deactivate UBL")
#endif
#ifndef MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_BED_TEMP _UxGT("Bed Temp")
#ifndef MSG_UBL_SET_TEMP_BED
#define MSG_UBL_SET_TEMP_BED _UxGT("Bed Temp")
#endif
#ifndef MSG_UBL_CUSTOM_BED_TEMP
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#ifndef MSG_UBL_BED_TEMP_CUSTOM
#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
#endif
#ifndef MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp")
#ifndef MSG_UBL_SET_TEMP_HOTEND
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Hotend Temp")
#endif
#ifndef MSG_UBL_CUSTOM_HOTEND_TEMP
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#ifndef MSG_UBL_HOTEND_TEMP_CUSTOM
#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
#endif
#ifndef MSG_UBL_MESH_EDIT
#define MSG_UBL_MESH_EDIT _UxGT("Mesh Edit")
@ -277,17 +277,17 @@
#ifndef MSG_UBL_DONE_EDITING_MESH
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh")
#endif
#ifndef MSG_UBL_BUILD_CUSTOM_MESH
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh")
#ifndef MSG_UBL_BUILD_MESH_CUSTOM
#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Build Custom Mesh")
#endif
#ifndef MSG_UBL_BUILD_MESH_MENU
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Build Mesh")
#endif
#ifndef MSG_UBL_BUILD_PLA_MESH
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Build PLA Mesh")
#ifndef MSG_UBL_BUILD_MESH_M1
#define MSG_UBL_BUILD_MESH_M1 _UxGT("Build Mesh (" PREHEAT_1_LABEL ")")
#endif
#ifndef MSG_UBL_BUILD_ABS_MESH
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Build ABS Mesh")
#ifndef MSG_UBL_BUILD_MESH_M2
#define MSG_UBL_BUILD_MESH_M2 _UxGT("Build Mesh (" PREHEAT_2_LABEL ")")
#endif
#ifndef MSG_UBL_BUILD_COLD_MESH
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Build Cold Mesh")
@ -301,14 +301,14 @@
#ifndef MSG_UBL_VALIDATE_MESH_MENU
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validate Mesh")
#endif
#ifndef MSG_UBL_VALIDATE_PLA_MESH
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Validate PLA Mesh")
#ifndef MSG_UBL_VALIDATE_MESH_M1
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Validate Mesh (" PREHEAT_1_LABEL ")")
#endif
#ifndef MSG_UBL_VALIDATE_ABS_MESH
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Validate ABS Mesh")
#ifndef MSG_UBL_VALIDATE_MESH_M2
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Validate Mesh (" PREHEAT_2_LABEL ")")
#endif
#ifndef MSG_UBL_VALIDATE_CUSTOM_MESH
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh")
#ifndef MSG_UBL_VALIDATE_MESH_CUSTOM
#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Validate Custom Mesh")
#endif
#ifndef MSG_UBL_CONTINUE_MESH
#define MSG_UBL_CONTINUE_MESH _UxGT("Continue Bed Mesh")

@ -55,13 +55,13 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Ajustar desfases")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Desfase aplicado")
#define MSG_SET_ORIGIN _UxGT("Establecer origen")
#define MSG_PREHEAT_1 _UxGT("Precalentar PLA")
#define MSG_PREHEAT_1 _UxGT("Precalentar " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Todo")
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" End")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Cama")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Config")
#define MSG_PREHEAT_2 _UxGT("Precalentar ABS")
#define MSG_PREHEAT_2 _UxGT("Precalentar " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Todo")
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" End")

@ -56,13 +56,13 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Etxe. offset eza.")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsetak ezarrita")
#define MSG_SET_ORIGIN _UxGT("Hasiera ipini")
#define MSG_PREHEAT_1 _UxGT("Berotu PLA")
#define MSG_PREHEAT_1 _UxGT("Berotu " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Guztia")
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Amaia")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Ohea")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Ezarp.")
#define MSG_PREHEAT_2 _UxGT("Berotu ABS")
#define MSG_PREHEAT_2 _UxGT("Berotu " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_1 _UxGT(" Guztia")
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Amaia")
@ -92,25 +92,25 @@
//#define MSG_UBL_MOVING_TO_NEXT _UxGT("Moving to next")
#define MSG_UBL_ACTIVATE_MESH _UxGT("UBL aktibatu")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("UBL desaktibatu")
#define MSG_UBL_SET_BED_TEMP _UxGT("Ohearen tenperatura")
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Mutur beroaren tenp.")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_SET_TEMP_BED _UxGT("Ohearen tenperatura")
#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Mutur beroaren tenp.")
#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
#define MSG_UBL_MESH_EDIT _UxGT("Sarea editatu")
//#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Edit Custom Mesh")
//#define MSG_UBL_FINE_TUNE_MESH _UxGT("Fine Tuning Mesh")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Sarea editatzea eginda")
//#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh")
//#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Build Custom Mesh")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Sarea sortu")
#define MSG_UBL_BUILD_PLA_MESH _UxGT("PLA sarea sortu")
#define MSG_UBL_BUILD_ABS_MESH _UxGT("ABS sarea sortu")
#define MSG_UBL_BUILD_MESH_M1 _UxGT(PREHEAT_1_LABEL " sarea sortu")
#define MSG_UBL_BUILD_MESH_M2 _UxGT(PREHEAT_2_LABEL " sarea sortu")
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Sare hotza sortu")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Sarearen altuera doitu")
//#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount")
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Sarea balioetsi")
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("PLA sarea balioetsi")
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("ABS sarea balioetsi")
//#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh")
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT(PREHEAT_1_LABEL " sarea balioetsi")
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT(PREHEAT_2_LABEL " sarea balioetsi")
//#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Validate Custom Mesh")
#define MSG_UBL_CONTINUE_MESH _UxGT("Ohe sarea balioetsi")
#define MSG_UBL_MESH_LEVELING _UxGT("Sare berdinketa")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3 puntuko berdinketa")

@ -47,16 +47,16 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Set home offsets")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied")
#define MSG_SET_ORIGIN _UxGT("Aseta origo")
#define MSG_PREHEAT_1 _UxGT("Esilämmitä PLA")
#define MSG_PREHEAT_1_N _UxGT("Esilämmitä PLA ")
#define MSG_PREHEAT_1_ALL _UxGT("Esilä. PLA Kaikki")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Esilä. PLA Alusta")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Esilämm. PLA konf")
#define MSG_PREHEAT_2 _UxGT("Esilämmitä ABS")
#define MSG_PREHEAT_2_N _UxGT("Esilämmitä ABS ")
#define MSG_PREHEAT_2_ALL _UxGT("Esilä. ABS Kaikki")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Esilä. ABS Alusta")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Esilämm. ABS konf")
#define MSG_PREHEAT_1 _UxGT("Esilämmitä " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N _UxGT("Esilämmitä " PREHEAT_1_LABEL " ")
#define MSG_PREHEAT_1_ALL _UxGT("Esilä. " PREHEAT_1_LABEL " Kaikki")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Esilä. " PREHEAT_1_LABEL " Alusta")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Esilämm. " PREHEAT_1_LABEL " konf")
#define MSG_PREHEAT_2 _UxGT("Esilämmitä " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N _UxGT("Esilämmitä " PREHEAT_2_LABEL " ")
#define MSG_PREHEAT_2_ALL _UxGT("Esilä. " PREHEAT_2_LABEL " Kaikki")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Esilä. " PREHEAT_2_LABEL " Alusta")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Esilämm. " PREHEAT_2_LABEL " konf")
#define MSG_COOLDOWN _UxGT("Jäähdytä")
#define MSG_SWITCH_PS_ON _UxGT("Virta päälle")
#define MSG_SWITCH_PS_OFF _UxGT("Virta pois")

@ -56,18 +56,18 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Régl. décal. origine")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Décalages appliqués")
#define MSG_SET_ORIGIN _UxGT("Régler origine")
#define MSG_PREHEAT_1 _UxGT("Préchauffage PLA")
#define MSG_PREHEAT_1_N _UxGT("Préchauff. PLA ")
#define MSG_PREHEAT_1_ALL _UxGT("Préch. PLA Tout")
#define MSG_PREHEAT_1 _UxGT("Préchauffage " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N _UxGT("Préchauff. " PREHEAT_1_LABEL " ")
#define MSG_PREHEAT_1_ALL _UxGT("Préch. " PREHEAT_1_LABEL " Tout")
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" buse")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Préch. PLA lit")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Régl. prech. PLA")
#define MSG_PREHEAT_2 _UxGT("Préchauffage ABS")
#define MSG_PREHEAT_2_N _UxGT("Préchauff. ABS ")
#define MSG_PREHEAT_2_ALL _UxGT("Préch. ABS Tout")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Préch. " PREHEAT_1_LABEL " lit")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Régl. prech. " PREHEAT_1_LABEL)
#define MSG_PREHEAT_2 _UxGT("Préchauffage " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N _UxGT("Préchauff. " PREHEAT_2_LABEL " ")
#define MSG_PREHEAT_2_ALL _UxGT("Préch. " PREHEAT_2_LABEL " Tout")
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" buse")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Préch. ABS lit")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Régl. prech. ABS")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Préch. " PREHEAT_2_LABEL " lit")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Régl. prech. " PREHEAT_2_LABEL)
#define MSG_COOLDOWN _UxGT("Refroidir")
#define MSG_SWITCH_PS_ON _UxGT("Allumer alim.")
#define MSG_SWITCH_PS_OFF _UxGT("Eteindre alim.")
@ -92,25 +92,25 @@
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Aller au suivant")
#define MSG_UBL_ACTIVATE_MESH _UxGT("Activer l'UBL")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Désactiver l'UBL")
#define MSG_UBL_SET_BED_TEMP _UxGT("Température lit")
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Température buse")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_SET_TEMP_BED _UxGT("Température lit")
#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Température buse")
#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
#define MSG_UBL_MESH_EDIT _UxGT("Editer maille")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editer maille perso")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Réglage fin maille")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Terminer maille")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Créer maille perso")
#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Créer maille perso")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Créer maille")
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Créer maille PLA")
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Créer maille ABS")
#define MSG_UBL_BUILD_MESH_M1 _UxGT("Créer maille " PREHEAT_1_LABEL)
#define MSG_UBL_BUILD_MESH_M2 _UxGT("Créer maille " PREHEAT_2_LABEL)
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Créer maille froide")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Ajuster haut. maille")
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Hauteur")
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valider maille")
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valider maille PLA")
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valider maille ABS")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valider maille perso")
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Valider maille " PREHEAT_1_LABEL)
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Valider maille " PREHEAT_2_LABEL)
#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Valider maille perso")
#define MSG_UBL_CONTINUE_MESH _UxGT("Continuer maille")
#define MSG_UBL_MESH_LEVELING _UxGT("Niveau par maille")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Niveau à 3 points")

@ -52,16 +52,16 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Offsets na orixe")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets fixados")
#define MSG_SET_ORIGIN _UxGT("Fixar orixe")
#define MSG_PREHEAT_1 _UxGT("Prequentar PLA")
#define MSG_PREHEAT_1_N _UxGT("Prequentar PLA ")
#define MSG_PREHEAT_1_ALL _UxGT("Preque. PLA Todo")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Preque. PLA Cama")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Preque. PLA conf")
#define MSG_PREHEAT_2 _UxGT("Prequentar ABS")
#define MSG_PREHEAT_2_N _UxGT("Prequentar ABS ")
#define MSG_PREHEAT_2_ALL _UxGT("Preque. ABS Todo")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Preque. ABS Cama")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Preque. ABS conf")
#define MSG_PREHEAT_1 _UxGT("Prequentar " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N _UxGT("Prequentar " PREHEAT_1_LABEL " ")
#define MSG_PREHEAT_1_ALL _UxGT("Preque. " PREHEAT_1_LABEL " Todo")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Preque. " PREHEAT_1_LABEL " Cama")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Preque. " PREHEAT_1_LABEL " conf")
#define MSG_PREHEAT_2 _UxGT("Prequentar " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N _UxGT("Prequentar " PREHEAT_2_LABEL " ")
#define MSG_PREHEAT_2_ALL _UxGT("Preque. " PREHEAT_2_LABEL " Todo")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Preque. " PREHEAT_2_LABEL " Cama")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Preque. " PREHEAT_2_LABEL " conf")
#define MSG_COOLDOWN _UxGT("Arrefriar")
#define MSG_SWITCH_PS_ON _UxGT("Acender")
#define MSG_SWITCH_PS_OFF _UxGT("Apagar")

@ -52,12 +52,12 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Postavi home offsete")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets postavljeni")
#define MSG_SET_ORIGIN _UxGT("Postavi ishodište")
#define MSG_PREHEAT_1 _UxGT("Predgrij PLA")
#define MSG_PREHEAT_1 _UxGT("Predgrij " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Sve")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Bed")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf")
#define MSG_PREHEAT_2 _UxGT("Predgrij ABS")
#define MSG_PREHEAT_2 _UxGT("Predgrij " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Sve")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed")

@ -58,14 +58,14 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Imp. offset home")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offset applicato")
#define MSG_SET_ORIGIN _UxGT("Imposta Origine")
#define MSG_PREHEAT_1 _UxGT("Preriscalda PLA")
#define MSG_PREHEAT_1_N _UxGT("Preris.PLA ")
#define MSG_PREHEAT_1 _UxGT("Preriscalda " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N _UxGT("Preris." PREHEAT_1_LABEL " ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N _UxGT("Tutto")
#define MSG_PREHEAT_1_END MSG_PREHEAT_1_N _UxGT("Ugello")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N _UxGT("Piatto")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1_N _UxGT("conf")
#define MSG_PREHEAT_2 _UxGT("Preriscalda ABS")
#define MSG_PREHEAT_2_N _UxGT("Preris.ABS ")
#define MSG_PREHEAT_2 _UxGT("Preriscalda " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N _UxGT("Preris." PREHEAT_2_LABEL " ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N _UxGT("Tutto")
#define MSG_PREHEAT_2_END MSG_PREHEAT_2_N _UxGT("Ugello")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Piatto")
@ -103,25 +103,25 @@
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Spostamento succes.")
#define MSG_UBL_ACTIVATE_MESH _UxGT("Attiva UBL")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Disattiva UBL")
#define MSG_UBL_SET_BED_TEMP _UxGT("Temp. Piatto")
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp. Ugello")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_SET_TEMP_BED _UxGT("Temp. Piatto")
#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Temp. Ugello")
#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
#define MSG_UBL_MESH_EDIT _UxGT("Modifica Mesh")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif.Mesh personal.")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Ritocca Mesh")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Modif.Mesh fatta")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Crea Mesh personal.")
#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Crea Mesh personal.")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Crea Mesh")
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Crea Mesh PLA")
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Crea Mesh ABS")
#define MSG_UBL_BUILD_MESH_M1 _UxGT("Crea Mesh " PREHEAT_1_LABEL)
#define MSG_UBL_BUILD_MESH_M2 _UxGT("Crea Mesh " PREHEAT_2_LABEL)
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Crea Mesh a freddo")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Aggiusta Alt. Mesh")
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Altezza")
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valida Mesh")
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valida Mesh PLA")
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valida Mesh ABS")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valida Mesh pers.")
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Valida Mesh " PREHEAT_1_LABEL)
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Valida Mesh " PREHEAT_2_LABEL)
#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Valida Mesh pers.")
#define MSG_UBL_CONTINUE_MESH _UxGT("Continua Mesh")
#define MSG_UBL_MESH_LEVELING _UxGT("Livell. Mesh")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Livell. 3 Punti")

@ -60,12 +60,12 @@
#define MSG_SET_HOME_OFFSETS _UxGT("キジュンオフセットセッテイ") // "Set home offsets"
#define MSG_HOME_OFFSETS_APPLIED _UxGT("オフセットガテキヨウサレマシタ") // "Offsets applied"
#define MSG_SET_ORIGIN _UxGT("キジュンセット") // "Set origin"
#define MSG_PREHEAT_1 _UxGT(PREHEAT_1_LABEL " ヨネツ") // "Preheat PLA"
#define MSG_PREHEAT_1 _UxGT(PREHEAT_1_LABEL " ヨネツ") // "Preheat " PREHEAT_1_LABEL
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL _UxGT(PREHEAT_1_LABEL " スベテヨネツ") // " All"
#define MSG_PREHEAT_1_BEDONLY _UxGT(PREHEAT_1_LABEL " ベッドヨネツ") // " Bed"
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT("セッテイ") // " conf"
#define MSG_PREHEAT_2 _UxGT(PREHEAT_2_LABEL " ヨネツ") // "Preheat ABS"
#define MSG_PREHEAT_2 _UxGT(PREHEAT_2_LABEL " ヨネツ") // "Preheat " PREHEAT_2_LABEL
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL _UxGT(PREHEAT_2_LABEL " スベテヨネツ") // " All"
#define MSG_PREHEAT_2_BEDONLY _UxGT(PREHEAT_2_LABEL " ベッドヨネツ") // " Bed"

@ -58,13 +58,13 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Set home offsets")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied")
#define MSG_SET_ORIGIN _UxGT("Set origin")
#define MSG_PREHEAT_1 _UxGT("예열하기 - PLA")
#define MSG_PREHEAT_1 _UxGT("예열하기 - " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 모두")
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" 노즐만")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 베드만")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf")
#define MSG_PREHEAT_2 _UxGT("예열하기 - ABS")
#define MSG_PREHEAT_2 _UxGT("예열하기 - " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 모두")
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" 노즐만")
@ -103,25 +103,25 @@
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Moving to next")
#define MSG_UBL_ACTIVATE_MESH _UxGT("Activate UBL")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Deactivate UBL")
#define MSG_UBL_SET_BED_TEMP _UxGT("Bed Temp")
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_SET_TEMP_BED _UxGT("Bed Temp")
#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Hotend Temp")
#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
#define MSG_UBL_MESH_EDIT _UxGT("Mesh Edit")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Edit Custom Mesh")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Fine Tuning Mesh")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh")
#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Build Custom Mesh")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Build Mesh")
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Build PLA Mesh")
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Build ABS Mesh")
#define MSG_UBL_BUILD_MESH_M1 _UxGT("Build Mesh (" PREHEAT_1_LABEL ")")
#define MSG_UBL_BUILD_MESH_M2 _UxGT("Build Mesh (" PREHEAT_2_LABEL ")")
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Build Cold Mesh")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Adjust Mesh Height")
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount")
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validate Mesh")
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Validate PLA Mesh")
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Validate ABS Mesh")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh")
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Validate " PREHEAT_1_LABEL " Mesh")
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Validate Mesh (" PREHEAT_2_LABEL ")")
#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Validate Custom Mesh")
#define MSG_UBL_CONTINUE_MESH _UxGT("Continue Bed Mesh")
#define MSG_UBL_MESH_LEVELING _UxGT("Mesh Leveling")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Point Leveling")

@ -55,18 +55,18 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Zet home offsets")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("H offset toegep.")
#define MSG_SET_ORIGIN _UxGT("Nulpunt instellen")
#define MSG_PREHEAT_1 _UxGT("PLA voorverwarmen")
#define MSG_PREHEAT_1_N _UxGT("PLA voorverw. ")
#define MSG_PREHEAT_1 _UxGT(PREHEAT_1_LABEL " voorverwarmen")
#define MSG_PREHEAT_1_N _UxGT(PREHEAT_1_LABEL " voorverw. ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1_N _UxGT("aan")
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Einde")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1_N _UxGT("Bed")
#define MSG_PREHEAT_1_SETTINGS _UxGT("PLA verw. conf")
#define MSG_PREHEAT_2 _UxGT("ABS voorverwarmen")
#define MSG_PREHEAT_2_N _UxGT("ABS voorverw. ")
#define MSG_PREHEAT_1_SETTINGS _UxGT(PREHEAT_1_LABEL " verw. conf")
#define MSG_PREHEAT_2 _UxGT(PREHEAT_2_LABEL " voorverwarmen")
#define MSG_PREHEAT_2_N _UxGT(PREHEAT_2_LABEL " voorverw. ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2_N _UxGT("aan")
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Einde")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Bed")
#define MSG_PREHEAT_2_SETTINGS _UxGT("ABS verw. conf")
#define MSG_PREHEAT_2_SETTINGS _UxGT(PREHEAT_2_LABEL " verw. conf")
#define MSG_COOLDOWN _UxGT("Afkoelen")
#define MSG_SWITCH_PS_ON _UxGT("Stroom aan")
#define MSG_SWITCH_PS_OFF _UxGT("Stroom uit")

@ -52,16 +52,16 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Ust. poz. zer.")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Poz. zerowa ust.")
#define MSG_SET_ORIGIN _UxGT("Ustaw punkt zero")
#define MSG_PREHEAT_1 _UxGT("Rozgrzej PLA")
#define MSG_PREHEAT_1 _UxGT("Rozgrzej " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" wsz.")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stół PLA")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. PLA")
#define MSG_PREHEAT_2 _UxGT("Rozgrzej ABS")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Rozgrzej stół " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_SETTINGS _UxGT("Ustaw. rozg. " PREHEAT_1_LABEL)
#define MSG_PREHEAT_2 _UxGT("Rozgrzej " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" wsz.")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stół ABS")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. ABS")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Rozgrzej stół " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_SETTINGS _UxGT("Ustaw. rozg. " PREHEAT_2_LABEL)
#define MSG_COOLDOWN _UxGT("Chłodzenie")
#define MSG_SWITCH_PS_ON _UxGT("Włącz zasilacz")
#define MSG_SWITCH_PS_OFF _UxGT("Wyłącz zasilacz")

@ -60,18 +60,18 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Compensar origem")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Alteração feita")
#define MSG_SET_ORIGIN _UxGT("Ajustar Origem")
#define MSG_PREHEAT_1 _UxGT("Pre-aquecer PLA")
#define MSG_PREHEAT_1 _UxGT("Pre-aquecer " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL _UxGT("Pre-aq.Todo PLA")
#define MSG_PREHEAT_1_ALL _UxGT("Pre-aq.Todo " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_END _UxGT("Pre-aq.Extrusora")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Pre-aq.Mesa PLA")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Ajustar PLA")
#define MSG_PREHEAT_2 _UxGT("Pre-aquecer ABS")
#define MSG_PREHEAT_2_N _UxGT("Pre-aquecer ABS")
#define MSG_PREHEAT_2_ALL _UxGT("Pre-aq.Todo ABS")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Pre-aq.Mesa ABS")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Pre-aq.Mesa " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_SETTINGS _UxGT("Ajustar " PREHEAT_1_LABEL)
#define MSG_PREHEAT_2 _UxGT("Pre-aquecer " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N _UxGT("Pre-aquecer " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_ALL _UxGT("Pre-aq.Todo " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_BEDONLY _UxGT("Pre-aq.Mesa " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_END _UxGT("Pre-aq.Extrusora")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Ajustar ABS")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Ajustar " PREHEAT_2_LABEL)
#define MSG_COOLDOWN _UxGT("Esfriar")
#define MSG_SWITCH_PS_ON _UxGT("Ligar")
#define MSG_SWITCH_PS_OFF _UxGT("Desligar")
@ -97,25 +97,25 @@
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Indo para o Próximo")
#define MSG_UBL_ACTIVATE_MESH _UxGT("Ativar UBL")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Desativar UBL")
#define MSG_UBL_SET_BED_TEMP _UxGT("Temp. Mesa")
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp. Extrusora")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_SET_TEMP_BED _UxGT("Temp. Mesa")
#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Temp. Extrusora")
#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
#define MSG_UBL_MESH_EDIT _UxGT("Editar Malha")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editar Malha Custom")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Ajuste Fino da Malha")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Fim da Edição")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Montar Customi")
#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Montar Customi")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Montar ")
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Montar PLA")
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Montar ABS")
#define MSG_UBL_BUILD_MESH_M1 _UxGT("Montar " PREHEAT_1_LABEL)
#define MSG_UBL_BUILD_MESH_M2 _UxGT("Montar " PREHEAT_2_LABEL)
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Montar fria")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Ajustar Altura")
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Tamanho da Elevação")
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validar Malha")
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Checar PLA")
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Checar ABS")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validar Malha Custom")
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Checar " PREHEAT_1_LABEL)
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Checar " PREHEAT_2_LABEL)
#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Validar Malha Custom")
#define MSG_UBL_CONTINUE_MESH _UxGT("Continuar Malha")
#define MSG_UBL_MESH_LEVELING _UxGT("Nivelação da Malha")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Nivelação 3 pontos")

@ -52,16 +52,16 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Definir desvio")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets aplicados")
#define MSG_SET_ORIGIN _UxGT("Definir origem")
#define MSG_PREHEAT_1 _UxGT("Pre-aquecer PLA")
#define MSG_PREHEAT_1_N _UxGT("Pre-aquecer PLA")
#define MSG_PREHEAT_1_ALL _UxGT("Pre-aq. PLA Tudo")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Pre-aq. PLA ") LCD_STR_THERMOMETER _UxGT("Base")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Definições PLA")
#define MSG_PREHEAT_2 _UxGT("Pre-aquecer ABS")
#define MSG_PREHEAT_2_N _UxGT("Pre-aquecer ABS ")
#define MSG_PREHEAT_2_ALL _UxGT("Pre-aq. ABS Tudo")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Pre-aq. ABS ") LCD_STR_THERMOMETER _UxGT("Base")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Definições ABS")
#define MSG_PREHEAT_1 _UxGT("Pre-aquecer " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N _UxGT("Pre-aquecer " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_ALL _UxGT("Pre-aq. " PREHEAT_1_LABEL " Tudo")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Pre-aq. " PREHEAT_1_LABEL " ") LCD_STR_THERMOMETER _UxGT("Base")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Definições " PREHEAT_1_LABEL)
#define MSG_PREHEAT_2 _UxGT("Pre-aquecer " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N _UxGT("Pre-aquecer " PREHEAT_2_LABEL " ")
#define MSG_PREHEAT_2_ALL _UxGT("Pre-aq. " PREHEAT_2_LABEL " Tudo")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Pre-aq. " PREHEAT_2_LABEL " ") LCD_STR_THERMOMETER _UxGT("Base")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Definições " PREHEAT_2_LABEL)
#define MSG_COOLDOWN _UxGT("Arrefecer")
#define MSG_SWITCH_PS_ON _UxGT("Ligar")
#define MSG_SWITCH_PS_OFF _UxGT("Desligar")

@ -57,13 +57,13 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Запомнить парковку")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Коррекции применены")
#define MSG_SET_ORIGIN _UxGT("Запомнить ноль")
#define MSG_PREHEAT_1 _UxGT("Преднагрев PLA")
#define MSG_PREHEAT_1 _UxGT("Преднагрев " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" всё")
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" сопло")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" стол")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" настр.")
#define MSG_PREHEAT_2 _UxGT("Преднагрев ABS")
#define MSG_PREHEAT_2 _UxGT("Преднагрев " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" всё")
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" сопло")
@ -93,25 +93,25 @@
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Двигаемся дальше")
#define MSG_UBL_ACTIVATE_MESH _UxGT("Активировать UBL")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Деактивировать UBL")
#define MSG_UBL_SET_BED_TEMP _UxGT("Температура стола")
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Температура сопла")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_SET_TEMP_BED _UxGT("Температура стола")
#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Температура сопла")
#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
#define MSG_UBL_MESH_EDIT _UxGT("Редактор сеток")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Редакт. свою сетку")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Точная настр. сетки")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Ред. сетки завершено")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Построить свою сетку")
#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Построить свою сетку")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Построить сетку")
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Построить сетку PLA")
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Построить сетку ABS")
#define MSG_UBL_BUILD_MESH_M1 _UxGT("Построить сетку " PREHEAT_1_LABEL)
#define MSG_UBL_BUILD_MESH_M2 _UxGT("Построить сетку " PREHEAT_2_LABEL)
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Построить хол. сетку")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Устан. высоту сетки")
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Высота")
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Проверить сетку")
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Проверить сетку PLA")
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Проверить сетку ABS")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Проверить свою сетку")
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Проверить сетку " PREHEAT_1_LABEL)
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Проверить сетку " PREHEAT_2_LABEL)
#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Проверить свою сетку")
#define MSG_UBL_CONTINUE_MESH _UxGT("Продолжить сетку")
#define MSG_UBL_MESH_LEVELING _UxGT("Калибровка сетки")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Калибровка 3-х точек")

@ -69,13 +69,13 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Nastaviť offsety")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsety nastavené")
#define MSG_SET_ORIGIN _UxGT("Nastaviť začiatok")
#define MSG_PREHEAT_1 _UxGT("Zahriať PLA")
#define MSG_PREHEAT_1 _UxGT("Zahriať " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" všetko")
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" hotend")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" podlož")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" nast.")
#define MSG_PREHEAT_2 _UxGT("Zahriať ABS")
#define MSG_PREHEAT_2 _UxGT("Zahriať " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" všetko")
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" hotend")
@ -115,25 +115,25 @@
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Presun na ďalší")
#define MSG_UBL_ACTIVATE_MESH _UxGT("Aktivovať UBL")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Deaktivovať UBL")
#define MSG_UBL_SET_BED_TEMP _UxGT("Teplota podložky")
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Teplota hotendu")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_SET_TEMP_BED _UxGT("Teplota podložky")
#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Teplota hotendu")
#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
#define MSG_UBL_MESH_EDIT _UxGT("Úprava siete bodov")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Upraviť vlastnú sieť")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Doladiť sieť bodov")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Koniec úprav siete")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Vlastná sieť")
#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("Vlastná sieť")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Vytvoriť sieť")
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Sieť bodov PLA")
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Sieť bodov ABS")
#define MSG_UBL_BUILD_MESH_M1 _UxGT("Sieť bodov " PREHEAT_1_LABEL)
#define MSG_UBL_BUILD_MESH_M2 _UxGT("Sieť bodov " PREHEAT_2_LABEL)
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Studená sieť bodov")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Upraviť výšku siete")
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Výška")
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Skontrolovať sieť")
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Kontrola siete PLA")
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Kontrola siete ABS")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Kontrola vlast.siete")
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Kontrola siete " PREHEAT_1_LABEL)
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Kontrola siete " PREHEAT_2_LABEL)
#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("Kontrola vlast.siete")
#define MSG_UBL_CONTINUE_MESH _UxGT("Pokračovať v sieti")
#define MSG_UBL_MESH_LEVELING _UxGT("Sieťové rovnanie")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-bodové rovnanie")

@ -55,13 +55,13 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Offset Ayarla") // Offset Ayarla
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offset Tamam") // Offset Tamam
#define MSG_SET_ORIGIN _UxGT("Sıfır Belirle") // Sıfır Belirle
#define MSG_PREHEAT_1 _UxGT("Ön Isınma PLA") // Ön Isınma PLA
#define MSG_PREHEAT_1 _UxGT("Ön Isınma " PREHEAT_1_LABEL) // Ön Isınma PREHEAT_1_LABEL
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tüm") // Tüm
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" Nozül") // Nozül
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Tabla") // Tabla
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Ayar") // Ayar
#define MSG_PREHEAT_2 _UxGT("Ön Isınma ABS") // Ön Isınma ABS
#define MSG_PREHEAT_2 _UxGT("Ön Isınma " PREHEAT_2_LABEL) // Ön Isınma PREHEAT_2_LABEL
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tüm") // Tüm
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" Nozül") // Nozül

@ -52,12 +52,12 @@
#define MSG_SET_HOME_OFFSETS _UxGT("Зберегти паркув.")
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Зміщення застос.")
#define MSG_SET_ORIGIN _UxGT("Встанов. початок")
#define MSG_PREHEAT_1 _UxGT("Нагрів PLA")
#define MSG_PREHEAT_1 _UxGT("Нагрів " PREHEAT_1_LABEL)
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Все")
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Стіл")
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" нал.")
#define MSG_PREHEAT_2 _UxGT("Нагрів ABS")
#define MSG_PREHEAT_2 _UxGT("Нагрів " PREHEAT_2_LABEL)
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Все")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Стіл")

@ -57,12 +57,12 @@
#define MSG_SET_HOME_OFFSETS _UxGT("设置原点偏移") //"Set home offsets"
#define MSG_HOME_OFFSETS_APPLIED _UxGT("偏移已启用") //"Offsets applied"
#define MSG_SET_ORIGIN _UxGT("设置原点") //"Set origin"
#define MSG_PREHEAT_1 _UxGT("预热" PREHEAT_1_LABEL) //"Preheat PLA"
#define MSG_PREHEAT_1 _UxGT("预热" PREHEAT_1_LABEL) //"Preheat PREHEAT_2_LABEL"
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //MSG_PREHEAT_1 " "
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 全部") //MSG_PREHEAT_1 " All"
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 热床") //MSG_PREHEAT_1 " Bed"
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" 设置") //MSG_PREHEAT_1 " conf"
#define MSG_PREHEAT_2 _UxGT("预热" PREHEAT_2_LABEL) //"Preheat ABS"
#define MSG_PREHEAT_2 _UxGT("预热" PREHEAT_2_LABEL) //"Preheat PREHEAT_2_LABEL"
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //MSG_PREHEAT_2 " "
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 全部") //MSG_PREHEAT_2 " All"
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" 热床") //MSG_PREHEAT_2 " Bed"
@ -93,23 +93,23 @@
#define MSG_UBL_MOVING_TO_NEXT _UxGT("移动到下一个") // "Moving to next"
#define MSG_UBL_ACTIVATE_MESH _UxGT("激活UBL") // "Activate UBL"
#define MSG_UBL_DEACTIVATE_MESH _UxGT("关闭UBL") // "Deactivate UBL"
#define MSG_UBL_SET_BED_TEMP _UxGT("设置热床温度") // "Bed Temp"
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("热端温度") // "Hotend Temp"
#define MSG_UBL_SET_TEMP_BED _UxGT("设置热床温度") // "Bed Temp"
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("热端温度") // "Hotend Temp"
#define MSG_UBL_MESH_EDIT _UxGT("网格编辑") // "Mesh Edit"
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("编辑客户网格") // "Edit Custom Mesh"
#define MSG_UBL_FINE_TUNE_MESH _UxGT("细调网格") // "Fine Tuning Mesh"
#define MSG_UBL_DONE_EDITING_MESH _UxGT("完成编辑网格") // "Done Editing Mesh"
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("创设客户网格") // "Build Custom Mesh"
#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("创设客户网格") // "Build Custom Mesh"
#define MSG_UBL_BUILD_MESH_MENU _UxGT("创设网格") // "Build Mesh"
#define MSG_UBL_BUILD_PLA_MESH _UxGT("创设PLA网格") // "Build PLA Mesh"
#define MSG_UBL_BUILD_ABS_MESH _UxGT("创设ABS网格") // "Build ABS Mesh"
#define MSG_UBL_BUILD_MESH_M1 _UxGT("创设" PREHEAT_1_LABEL "网格") // "Build PREHEAT_1_LABEL Mesh"
#define MSG_UBL_BUILD_MESH_M2 _UxGT("创设" PREHEAT_2_LABEL "网格") // "Build PREHEAT_2_LABEL Mesh"
#define MSG_UBL_BUILD_COLD_MESH _UxGT("创设冷网格") // "Build Cold Mesh"
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("调整网格高度") // "Adjust Mesh Height"
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("高度合计") // "Height Amount"
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("批准网格") // "Validate Mesh"
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("批准PLA网格") // "Validate PLA Mesh"
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("批准ABS网格") // "Validate ABS Mesh"
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("批准客户网格") // "Validate Custom Mesh"
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("批准" PREHEAT_1_LABEL "网格") // "Validate PREHEAT_1_LABEL Mesh"
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("批准" PREHEAT_2_LABEL "网格") // "Validate PREHEAT_2_LABEL Mesh"
#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("批准客户网格") // "Validate Custom Mesh"
#define MSG_UBL_CONTINUE_MESH _UxGT("继续热床网格") // "Continue Bed Mesh"
#define MSG_UBL_MESH_LEVELING _UxGT("网格调平") // "Mesh Leveling"
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("三点调平") // "3-Point Leveling"

@ -57,12 +57,12 @@
#define MSG_SET_HOME_OFFSETS _UxGT("設置原點偏移") //"Set home offsets"
#define MSG_HOME_OFFSETS_APPLIED _UxGT("偏移已啟用") //"Offsets applied"
#define MSG_SET_ORIGIN _UxGT("設置原點") //"Set origin"
#define MSG_PREHEAT_1 _UxGT("預熱PLA") //"Preheat PLA"
#define MSG_PREHEAT_1 _UxGT("預熱" PREHEAT_1_LABEL) //"Preheat PREHEAT_1_LABEL"
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") //MSG_PREHEAT_1 " "
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" 全部") //MSG_PREHEAT_1 " All"
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" 熱床") //MSG_PREHEAT_1 " Bed"
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" 設置") //MSG_PREHEAT_1 " conf"
#define MSG_PREHEAT_2 _UxGT("預熱ABS") //"Preheat ABS"
#define MSG_PREHEAT_2 _UxGT("預熱" PREHEAT_2_LABEL) //"Preheat PREHEAT_2_LABEL"
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") //MSG_PREHEAT_2 " "
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" 全部") //MSG_PREHEAT_2 " All"
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" 熱床") //MSG_PREHEAT_2 " Bed"
@ -93,23 +93,23 @@
#define MSG_UBL_MOVING_TO_NEXT _UxGT("移動到下一個") // "Moving to next"
#define MSG_UBL_ACTIVATE_MESH _UxGT("激活UBL") // "Activate UBL"
#define MSG_UBL_DEACTIVATE_MESH _UxGT("關閉UBL") // "Deactivate UBL"
#define MSG_UBL_SET_BED_TEMP _UxGT("設置熱床溫度") // "Bed Temp"
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("熱端溫度") // "Hotend Temp"
#define MSG_UBL_SET_TEMP_BED _UxGT("設置熱床溫度") // "Bed Temp"
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("熱端溫度") // "Hotend Temp"
#define MSG_UBL_MESH_EDIT _UxGT("網格編輯") // "Mesh Edit"
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("編輯客戶網格") // "Edit Custom Mesh"
#define MSG_UBL_FINE_TUNE_MESH _UxGT("細調網格") // "Fine Tuning Mesh"
#define MSG_UBL_DONE_EDITING_MESH _UxGT("完成編輯網格") // "Done Editing Mesh"
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("創設客戶網格") // "Build Custom Mesh"
#define MSG_UBL_BUILD_MESH_CUSTOM _UxGT("創設客戶網格") // "Build Custom Mesh"
#define MSG_UBL_BUILD_MESH_MENU _UxGT("創設網格") // "Build Mesh"
#define MSG_UBL_BUILD_PLA_MESH _UxGT("創設PLA網格") // "Build PLA Mesh"
#define MSG_UBL_BUILD_ABS_MESH _UxGT("創設ABS網格") // "Build ABS Mesh"
#define MSG_UBL_BUILD_MESH_M1 _UxGT("創設" PREHEAT_1_LABEL "網格") // "Build PREHEAT_1_LABEL Mesh"
#define MSG_UBL_BUILD_MESH_M2 _UxGT("創設" PREHEAT_2_LABEL "網格") // "Build PREHEAT_2_LABEL Mesh"
#define MSG_UBL_BUILD_COLD_MESH _UxGT("創設冷網格") // "Build Cold Mesh"
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("調整網格高度") // "Adjust Mesh Height"
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("高度合計") // "Height Amount"
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("批准網格") // "Validate Mesh"
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("批准PLA網格") // "Validate PLA Mesh"
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("批准ABS網格") // "Validate ABS Mesh"
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("批准客戶網格") // "Validate Custom Mesh"
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("批准" PREHEAT_1_LABEL "網格") // "Validate PREHEAT_1_LABEL Mesh"
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("批准" PREHEAT_2_LABEL "網格") // "Validate PREHEAT_2_LABEL Mesh"
#define MSG_UBL_VALIDATE_MESH_CUSTOM _UxGT("批准客戶網格") // "Validate Custom Mesh"
#define MSG_UBL_CONTINUE_MESH _UxGT("繼續熱床網格") // "Continue Bed Mesh"
#define MSG_UBL_MESH_LEVELING _UxGT("網格調平") // "Mesh Leveling"
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("三點調平") // "3-Point Leveling"

@ -2226,11 +2226,11 @@ void lcd_quick_feedback(const bool clear_buttons) {
void _lcd_ubl_custom_mesh() {
START_MENU();
MENU_BACK(MSG_UBL_BUILD_MESH_MENU);
MENU_ITEM_EDIT(int3, MSG_UBL_CUSTOM_HOTEND_TEMP, &custom_hotend_temp, EXTRUDE_MINTEMP, (HEATER_0_MAXTEMP - 10));
MENU_ITEM_EDIT(int3, MSG_UBL_HOTEND_TEMP_CUSTOM, &custom_hotend_temp, EXTRUDE_MINTEMP, (HEATER_0_MAXTEMP - 10));
#if HAS_HEATED_BED
MENU_ITEM_EDIT(int3, MSG_UBL_CUSTOM_BED_TEMP, &custom_bed_temp, BED_MINTEMP, (BED_MAXTEMP - 15));
MENU_ITEM_EDIT(int3, MSG_UBL_BED_TEMP_CUSTOM, &custom_bed_temp, BED_MINTEMP, (BED_MAXTEMP - 15));
#endif
MENU_ITEM(function, MSG_UBL_BUILD_CUSTOM_MESH, _lcd_ubl_build_custom_mesh);
MENU_ITEM(function, MSG_UBL_BUILD_MESH_CUSTOM, _lcd_ubl_build_custom_mesh);
END_MENU();
}
@ -2301,8 +2301,8 @@ void lcd_quick_feedback(const bool clear_buttons) {
* UBL Validate Mesh submenu
*
* << UBL Tools
* PLA Mesh Validation
* ABS Mesh Validation
* Mesh Validation with Material 1
* Mesh Validation with Material 2
* Validate Custom Mesh
* << Info Screen
*/
@ -2310,13 +2310,13 @@ void lcd_quick_feedback(const bool clear_buttons) {
START_MENU();
MENU_BACK(MSG_UBL_TOOLS);
#if HAS_HEATED_BED
MENU_ITEM(gcode, MSG_UBL_VALIDATE_PLA_MESH, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_1_TEMP_BED) " H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P"));
MENU_ITEM(gcode, MSG_UBL_VALIDATE_ABS_MESH, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_2_TEMP_BED) " H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P"));
MENU_ITEM(gcode, MSG_UBL_VALIDATE_MESH_M1, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_1_TEMP_BED) " H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P"));
MENU_ITEM(gcode, MSG_UBL_VALIDATE_MESH_M2, PSTR("G28\nG26 C B" STRINGIFY(PREHEAT_2_TEMP_BED) " H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P"));
#else
MENU_ITEM(gcode, MSG_UBL_VALIDATE_PLA_MESH, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P"));
MENU_ITEM(gcode, MSG_UBL_VALIDATE_ABS_MESH, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P"));
MENU_ITEM(gcode, MSG_UBL_VALIDATE_MESH_M1, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_1_TEMP_HOTEND) " P"));
MENU_ITEM(gcode, MSG_UBL_VALIDATE_MESH_M2, PSTR("G28\nG26 C B0 H" STRINGIFY(PREHEAT_2_TEMP_HOTEND) " P"));
#endif
MENU_ITEM(function, MSG_UBL_VALIDATE_CUSTOM_MESH, _lcd_ubl_validate_custom_mesh);
MENU_ITEM(function, MSG_UBL_VALIDATE_MESH_CUSTOM, _lcd_ubl_validate_custom_mesh);
MENU_ITEM(function, MSG_WATCH, lcd_return_to_status);
END_MENU();
}
@ -2400,8 +2400,8 @@ void lcd_quick_feedback(const bool clear_buttons) {
* UBL Build Mesh submenu
*
* << UBL Tools
* Build PLA Mesh
* Build ABS Mesh
* Build Mesh with Material 1
* Build Mesh with Material 2
* - Build Custom Mesh >>
* Build Cold Mesh
* - Fill-in Mesh >>
@ -2414,7 +2414,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
START_MENU();
MENU_BACK(MSG_UBL_TOOLS);
#if HAS_HEATED_BED
MENU_ITEM(gcode, MSG_UBL_BUILD_PLA_MESH, PSTR(
MENU_ITEM(gcode, MSG_UBL_BUILD_MESH_M1, PSTR(
"G28\n"
"M190 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\n"
"M109 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) "\n"
@ -2422,7 +2422,7 @@ void lcd_quick_feedback(const bool clear_buttons) {
"M104 S0\n"
"M140 S0"
));
MENU_ITEM(gcode, MSG_UBL_BUILD_ABS_MESH, PSTR(
MENU_ITEM(gcode, MSG_UBL_BUILD_MESH_M2, PSTR(
"G28\n"
"M190 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\n"
"M109 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) "\n"
@ -2431,20 +2431,20 @@ void lcd_quick_feedback(const bool clear_buttons) {
"M140 S0"
));
#else
MENU_ITEM(gcode, MSG_UBL_BUILD_PLA_MESH, PSTR(
MENU_ITEM(gcode, MSG_UBL_BUILD_MESH_M1, PSTR(
"G28\n"
"M109 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) "\n"
"G29 P1\n"
"M104 S0"
));
MENU_ITEM(gcode, MSG_UBL_BUILD_ABS_MESH, PSTR(
MENU_ITEM(gcode, MSG_UBL_BUILD_MESH_M2, PSTR(
"G28\n"
"M109 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) "\n"
"G29 P1\n"
"M104 S0"
));
#endif
MENU_ITEM(submenu, MSG_UBL_BUILD_CUSTOM_MESH, _lcd_ubl_custom_mesh);
MENU_ITEM(submenu, MSG_UBL_BUILD_MESH_CUSTOM, _lcd_ubl_custom_mesh);
MENU_ITEM(gcode, MSG_UBL_BUILD_COLD_MESH, PSTR("G28\nG29 P1"));
MENU_ITEM(submenu, MSG_UBL_FILLIN_MESH, _lcd_ubl_fillin_menu);
MENU_ITEM(gcode, MSG_UBL_CONTINUE_MESH, PSTR("G29 P1 C"));

Loading…
Cancel
Save