Merge pull request #10460 from thinkyhead/bf2_trigorilla_14

[2.0.x] Split TRIGORILLA into 1.3 and 1.4

Marlin/Makefile

@@ -113,320 +113,297 @@ endif
 # HARDWARE_VARIANT = "arduino", "Sanguino", "Gen7", ...
 # MCU = "atmega1280", "Mega2560", "atmega2560", "atmega644p", ...
 
-#Gen7
+ifeq ($(HARDWARE_MOTHERBOARD),0)
-ifeq ($(HARDWARE_MOTHERBOARD),10)
+
-HARDWARE_VARIANT ?= Gen7
+  # No motherboard selected
-MCU              ?= atmega644
+
-F_CPU            ?= 20000000
+#
-else ifeq  ($(HARDWARE_MOTHERBOARD),11)
+# RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560
-HARDWARE_VARIANT ?= Gen7
+#
-MCU              ?= atmega644p
-F_CPU            ?= 20000000
-else ifeq  ($(HARDWARE_MOTHERBOARD),12)
-HARDWARE_VARIANT ?= Gen7
-MCU              ?= atmega644p
-F_CPU            ?= 20000000
-else ifeq  ($(HARDWARE_MOTHERBOARD),13)
-HARDWARE_VARIANT ?= Gen7
-MCU              ?= atmega1284p
-F_CPU            ?= 20000000
 
-#RAMPS
+# MEGA/RAMPS up to 1.2
 else ifeq ($(HARDWARE_MOTHERBOARD),3)
-HARDWARE_VARIANT ?= arduino
+
-MCU              ?= atmega2560
+# RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
 else ifeq ($(HARDWARE_MOTHERBOARD),33)
-HARDWARE_VARIANT ?= arduino
+# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),34)
-HARDWARE_VARIANT ?= arduino
+# RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),35)
-HARDWARE_VARIANT ?= arduino
+# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),36)
-HARDWARE_VARIANT ?= arduino
+# RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),38)
-HARDWARE_VARIANT ?= arduino
+
-MCU              ?= atmega2560
+# RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
 else ifeq ($(HARDWARE_MOTHERBOARD),43)
-HARDWARE_VARIANT ?= arduino
+# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),44)
-HARDWARE_VARIANT ?= arduino
+# RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),45)
-HARDWARE_VARIANT ?= arduino
+# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),46)
-HARDWARE_VARIANT ?= arduino
+# RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),48)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
 
-#RAMPS equivalents
+# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed)
 else ifeq ($(HARDWARE_MOTHERBOARD),143)
-HARDWARE_VARIANT ?= arduino
+# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),144)
-HARDWARE_VARIANT ?= arduino
+# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),145)
-HARDWARE_VARIANT ?= arduino
+# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),146)
-HARDWARE_VARIANT ?= arduino
+# RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),148)
-HARDWARE_VARIANT ?= arduino
+
-MCU              ?= atmega2560
+#
+# RAMPS Derivatives - ATmega1280, ATmega2560
+#
+
+# 3Drag Controller
 else ifeq ($(HARDWARE_MOTHERBOARD),77)
-HARDWARE_VARIANT ?= arduino
+# Velleman K8200 Controller (derived from 3Drag Controller)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),78)
-HARDWARE_VARIANT ?= arduino
+# Velleman K8400 Controller (derived from 3Drag Controller)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),79)
-HARDWARE_VARIANT ?= arduino
+# 2PrintBeta BAM&DICE with STK drivers
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),401)
-HARDWARE_VARIANT ?= arduino
+# 2PrintBeta BAM&DICE Due with STK drivers
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),402)
-HARDWARE_VARIANT ?= arduino
+# MKS BASE v1.0
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),40)
-HARDWARE_VARIANT ?= arduino
+# MKS v1.5 with Allegro A4982 stepper drivers
-MCU              ?= atmega2560
+else ifeq ($(HARDWARE_MOTHERBOARD),405)
+# MKS BASE 1.0 with Heroic HR4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),41)
-HARDWARE_VARIANT ?= arduino
+# MKS GEN v1.3 or 1.4
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),47)
-HARDWARE_VARIANT ?= arduino
+# MKS GEN L
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),53)
-HARDWARE_VARIANT ?= arduino
+# zrib V2.0 control board (Chinese knock off RAMPS replica)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),504)
-HARDWARE_VARIANT ?= arduino
+# Felix 2.0+ Electronics Board (RAMPS like)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),37)
-HARDWARE_VARIANT ?= arduino
+# Invent-A-Part RigidBoard
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),42)
-HARDWARE_VARIANT ?= arduino
+# Invent-A-Part RigidBoard V2
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),52)
-HARDWARE_VARIANT ?= arduino
+# Sainsmart 2-in-1 board
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),49)
-HARDWARE_VARIANT ?= arduino
+# Ultimaker
-MCU              ?= atmega2560
+else ifeq ($(HARDWARE_MOTHERBOARD),7)
+# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+else ifeq ($(HARDWARE_MOTHERBOARD),71)
+MCU ?= atmega1280
+# Azteeg X3
+else ifeq ($(HARDWARE_MOTHERBOARD),67)
+# Azteeg X3 Pro
+else ifeq ($(HARDWARE_MOTHERBOARD),68)
+# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
 else ifeq ($(HARDWARE_MOTHERBOARD),72)
-HARDWARE_VARIANT ?= arduino
+# Rumba
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),80)
-HARDWARE_VARIANT ?= arduino
+# bq ZUM Mega 3D
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),503)
-HARDWARE_VARIANT ?= arduino
+# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),431)
-HARDWARE_VARIANT ?= arduino
+# TriGorilla Anycubic version 1.3 based on RAMPS EFB
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),343)
-HARDWARE_VARIANT ?= arduino
+# TriGorilla Anycubic version 1.4 based on RAMPS EFB
-MCU              ?= atmega2560
+else ifeq ($(HARDWARE_MOTHERBOARD),443)
+# Creality: Ender-4, CR-8
 else ifeq ($(HARDWARE_MOTHERBOARD),243)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
 
-#Other ATmega1280, ATmega2560
+#
+# Other ATmega1280, ATmega2560
+#
+
+# Cartesio CN Controls V11
 else ifeq ($(HARDWARE_MOTHERBOARD),111)
-HARDWARE_VARIANT ?= arduino
+# Cartesio CN Controls V12
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),112)
-HARDWARE_VARIANT ?= arduino
+# Cheaptronic v1.0
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),2)
-HARDWARE_VARIANT ?= arduino
+# Cheaptronic v2.0
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),21)
-HARDWARE_VARIANT ?= arduino
+# Makerbot Mightyboard Revision E
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),200)
-HARDWARE_VARIANT ?= arduino
+# Megatronics
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),70)
-HARDWARE_VARIANT ?= arduino
+# Megatronics v2.0
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),701)
-HARDWARE_VARIANT ?= arduino
+# Megatronics v3.0
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),703)
-HARDWARE_VARIANT ?= arduino
+# Megatronics v3.1
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),704)
-HARDWARE_VARIANT ?= arduino
+# Rambo
-MCU              ?= atmega2560
+else ifeq ($(HARDWARE_MOTHERBOARD),301)
+# Mini-Rambo
 else ifeq ($(HARDWARE_MOTHERBOARD),302)
-HARDWARE_VARIANT ?= arduino
+# Mini-Rambo 1.0a
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),303)
-HARDWARE_VARIANT ?= arduino
+# Einsy Rambo
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),304)
-HARDWARE_VARIANT ?= arduino
+# Einsy Retro
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),305)
-HARDWARE_VARIANT ?= arduino
+# Elefu Ra Board (v3)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),21)
-HARDWARE_VARIANT ?= arduino
+# Leapfrog
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),999)
-HARDWARE_VARIANT ?= arduino
+# Mega controller
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),310)
-HARDWARE_VARIANT ?= arduino
+# abee Scoovo X9H
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),321)
-HARDWARE_VARIANT ?= arduino
+# Geeetech GT2560 Rev. A
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),74)
-HARDWARE_VARIANT ?= arduino
+# Geeetech GT2560 Rev. A+ (with auto level probe)
-MCU              ?= atmega2560
 else ifeq ($(HARDWARE_MOTHERBOARD),75)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
 
-#Gen6
+#
-else ifeq  ($(HARDWARE_MOTHERBOARD),5)
+# ATmega1281, ATmega2561
-HARDWARE_VARIANT ?= Gen6
+#
-MCU              ?= atmega644p
+
-else ifeq  ($(HARDWARE_MOTHERBOARD),51)
+else ifeq ($(HARDWARE_MOTHERBOARD),702)
-HARDWARE_VARIANT ?= Gen6
+MCU              ?= atmega1281
-MCU              ?= atmega644p
+else ifeq ($(HARDWARE_MOTHERBOARD),25)
+MCU              ?= atmega1281
+
+#
+# Sanguinololu and Derivatives - ATmega644P, ATmega1284P
+#
 
-#Sanguinololu
+# Sanguinololu < 1.2
 else ifeq ($(HARDWARE_MOTHERBOARD),6)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega644p
+# Sanguinololu 1.2 and above
 else ifeq ($(HARDWARE_MOTHERBOARD),62)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega644p
+# Melzi
 else ifeq ($(HARDWARE_MOTHERBOARD),63)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega644p
-else ifeq  ($(HARDWARE_MOTHERBOARD),64)
+# Melzi with ATmega1284 (MaKr3d version)
+else ifeq ($(HARDWARE_MOTHERBOARD),66)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega1284p
-else ifeq  ($(HARDWARE_MOTHERBOARD),65)
+# Melzi Creality3D board (for CR-10 etc)
+else ifeq ($(HARDWARE_MOTHERBOARD),89)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega1284p
-else ifeq  ($(HARDWARE_MOTHERBOARD),66)
+# Melzi Malyan M150 board
+else ifeq ($(HARDWARE_MOTHERBOARD),92)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega1284p
-else ifeq  ($(HARDWARE_MOTHERBOARD),69)
+# Tronxy X5S
+else ifeq ($(HARDWARE_MOTHERBOARD),505)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega1284p
-else ifeq  ($(HARDWARE_MOTHERBOARD),89)
+# STB V1.1
+else ifeq ($(HARDWARE_MOTHERBOARD),64)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega1284p
-else ifeq  ($(HARDWARE_MOTHERBOARD),92)
+# Azteeg X1
+else ifeq ($(HARDWARE_MOTHERBOARD),65)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega1284p
-else ifeq  ($(HARDWARE_MOTHERBOARD),505)
+# Anet 1.0 (Melzi clone)
+else ifeq ($(HARDWARE_MOTHERBOARD),69)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega1284p
-else ifeq  ($(HARDWARE_MOTHERBOARD),601)
+
+#
+# Other ATmega644P, ATmega644, ATmega1284P
+#
+
+# Gen3 Monolithic Electronics
+else ifeq ($(HARDWARE_MOTHERBOARD),22)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega644p
+# Gen3+
+else ifeq ($(HARDWARE_MOTHERBOARD),9)
 HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega644p
+# Gen6
+else ifeq ($(HARDWARE_MOTHERBOARD),5)
+HARDWARE_VARIANT ?= Gen6
+MCU              ?= atmega644p
+# Gen6 deluxe
+else ifeq ($(HARDWARE_MOTHERBOARD),51)
+HARDWARE_VARIANT ?= Gen6
+MCU              ?= atmega644p
+# Gen7 custom (Alfons3 Version)
+else ifeq ($(HARDWARE_MOTHERBOARD),10)
+HARDWARE_VARIANT ?= Gen7
+MCU              ?= atmega644
+F_CPU            ?= 20000000
+# Gen7 v1.1, v1.2
+else ifeq ($(HARDWARE_MOTHERBOARD),11)
+HARDWARE_VARIANT ?= Gen7
+MCU              ?= atmega644p
+F_CPU            ?= 20000000
+# Gen7 v1.3
+else ifeq ($(HARDWARE_MOTHERBOARD),12)
+HARDWARE_VARIANT ?= Gen7
+MCU              ?= atmega644p
+F_CPU            ?= 20000000
+# Gen7 v1.4
+else ifeq ($(HARDWARE_MOTHERBOARD),13)
+HARDWARE_VARIANT ?= Gen7
 MCU              ?= atmega1284p
+F_CPU            ?= 20000000
+# Alpha OMCA board
+else ifeq ($(HARDWARE_MOTHERBOARD),90)
+HARDWARE_VARIANT ?= SanguinoA
+MCU              ?= atmega644
+# Final OMCA board
+else ifeq ($(HARDWARE_MOTHERBOARD),91)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega644p
+# Sethi 3D_1
+else ifeq ($(HARDWARE_MOTHERBOARD),20)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega644p
 
-#Ultimaker
+#
-else ifeq  ($(HARDWARE_MOTHERBOARD),7)
+# Teensyduino - AT90USB1286, AT90USB1286P
-HARDWARE_VARIANT ?= arduino
+#
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),71)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega1280
-
-#ATmega1281, ATmega2561
-else ifeq  ($(HARDWARE_MOTHERBOARD),702)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega1281
-else ifeq  ($(HARDWARE_MOTHERBOARD),25)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega1281
 
-#Teensylu
+# Teensylu
 else ifeq ($(HARDWARE_MOTHERBOARD),8)
 HARDWARE_VARIANT ?= Teensy
 MCU              ?= at90usb1286
+# Printrboard (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),81)
 HARDWARE_VARIANT ?= Teensy
 MCU              ?= at90usb1286
+# Printrboard Revision F (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),811)
 HARDWARE_VARIANT ?= Teensy
 MCU              ?= at90usb1286
+# Brainwave (AT90USB646)
 else ifeq ($(HARDWARE_MOTHERBOARD),82)
 HARDWARE_VARIANT ?= Teensy
 MCU              ?= at90usb646
+# Brainwave Pro (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),83)
 HARDWARE_VARIANT ?= Teensy
 MCU              ?= at90usb1286
+# SAV Mk-I (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),84)
 HARDWARE_VARIANT ?= Teensy
 MCU              ?= at90usb1286
+# Teensy++2.0 (AT90USB1286)
+else ifeq ($(HARDWARE_MOTHERBOARD),85)
+HARDWARE_VARIANT ?= Teensy
+MCU              ?= at90usb1286
+# 5DPrint D8 Driver Board
 else ifeq ($(HARDWARE_MOTHERBOARD),88)
 HARDWARE_VARIANT ?= Teensy
 MCU              ?= at90usb1286
 
-#Gen3+
-else ifeq  ($(HARDWARE_MOTHERBOARD),9)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
-
-#Gen3 Monolithic Electronics
-else ifeq  ($(HARDWARE_MOTHERBOARD),22)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
-
-#Megatronics
-else ifeq  ($(HARDWARE_MOTHERBOARD),70)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-
-#Alpha OMCA board
-else ifeq  ($(HARDWARE_MOTHERBOARD),90)
-HARDWARE_VARIANT ?= SanguinoA
-MCU              ?= atmega644
-
-#Final OMCA board
-else ifeq  ($(HARDWARE_MOTHERBOARD),91)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
-
-#Sethi 3D_1
-else ifeq  ($(HARDWARE_MOTHERBOARD),20)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
-
-#Rambo
-else ifeq  ($(HARDWARE_MOTHERBOARD),301)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-
-#Azteeg
-else ifeq  ($(HARDWARE_MOTHERBOARD),67)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),68)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-
 endif
 
 # Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
@@ -434,6 +411,10 @@ endif
 # Set to 16Mhz if not yet set.
 F_CPU ?= 16000000
 
+# Set to arduino, ATmega2560 if not yet set.
+HARDWARE_VARIANT ?= arduino
+MCU ?= atmega2560
+
 # Arduino contained the main source code for the Arduino
 # Libraries, the "hardware variant" are for boards
 # that derives from that, and their source are present in

Marlin/src/core/boards.h

@@ -61,7 +61,7 @@
 #define BOARD_MKS_BASE          40    // MKS BASE v1.0
 #define BOARD_MKS_BASE_15       405   // MKS v1.5 with Allegro A4982 stepper drivers
 #define BOARD_MKS_BASE_HEROIC   41    // MKS BASE 1.0 with Heroic HR4982 stepper drivers
-#define BOARD_MKS_GEN_13        47    // MKS v1.3 or 1.4
+#define BOARD_MKS_GEN_13        47    // MKS GEN v1.3 or 1.4
 #define BOARD_MKS_GEN_L         53    // MKS GEN L
 #define BOARD_ZRIB_V20          504   // zrib V2.0 control board (Chinese knock off RAMPS replica)
 #define BOARD_FELIX2            37    // Felix 2.0+ Electronics Board (RAMPS like)
@@ -76,7 +76,8 @@
 #define BOARD_RUMBA             80    // Rumba
 #define BOARD_BQ_ZUM_MEGA_3D    503   // bq ZUM Mega 3D
 #define BOARD_MAKEBOARD_MINI    431   // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
-#define BOARD_TRIGORILLA        343   // TriGorilla Anycubic version 1.3 based on RAMPS EFB
+#define BOARD_TRIGORILLA_13     343   // TriGorilla Anycubic version 1.3 based on RAMPS EFB
+#define BOARD_TRIGORILLA_14     443   // TriGorilla Anycubic version 1.4 based on RAMPS EFB
 #define BOARD_RAMPS_ENDER_4     243   // Creality: Ender-4, CR-8
 
 //
@@ -124,6 +125,7 @@
 #define BOARD_MELZI_TRONXY      505   // Tronxy X5S
 #define BOARD_STB_11            64    // STB V1.1
 #define BOARD_AZTEEG_X1         65    // Azteeg X1
+#define BOARD_ANET_10           69    // Anet 1.0 (Melzi clone)
 
 //
 // Other ATmega644P, ATmega644, ATmega1284P
@@ -140,7 +142,6 @@
 #define BOARD_OMCA_A            90    // Alpha OMCA board
 #define BOARD_OMCA              91    // Final OMCA board
 #define BOARD_SETHI             20    // Sethi 3D_1
-#define BOARD_ANET_10           69    // Anet 1.0 (Melzi clone)
 
 //
 // Teensyduino - AT90USB1286, AT90USB1286P
@@ -152,7 +153,7 @@
 #define BOARD_BRAINWAVE         82    // Brainwave (AT90USB646)
 #define BOARD_BRAINWAVE_PRO     85    // Brainwave Pro (AT90USB1286)
 #define BOARD_SAV_MKI           83    // SAV Mk-I (AT90USB1286)
-#define BOARD_TEENSY2           84    // Teensy++2.0 (AT90USB1286) - CLI compile: HARDWARE_MOTHERBOARD=84  make
+#define BOARD_TEENSY2           84    // Teensy++2.0 (AT90USB1286)
 #define BOARD_5DPRINT           88    // 5DPrint D8 Driver Board
 
 //

Marlin/src/inc/SanityCheck.h

@@ -273,8 +273,11 @@
 #endif
 
 #define BOARD_MKS_13     -47
+#define BOARD_TRIGORILLA -343
 #if MB(MKS_13)
   #error "BOARD_MKS_13 has been renamed BOARD_MKS_GEN_13. Please update your configuration."
+#elif MB(BOARD_TRIGORILLA)
+  #error "BOARD_TRIGORILLA has been renamed BOARD_TRIGORILLA_13. Please update your configuration."
 #endif
 
 /**

Marlin/src/pins/pins.h

@@ -136,8 +136,12 @@
   #include "pins_BQ_ZUM_MEGA_3D.h"    // ATmega2560
 #elif MB(MAKEBOARD_MINI)
   #include "pins_MAKEBOARD_MINI.h"    // ATmega2560
-#elif MB(TRIGORILLA)
+#elif MB(TRIGORILLA_13)
-  #include "pins_TRIGORILLA.h"        // ATmega2560
+  #include "pins_TRIGORILLA_13.h"     // ATmega2560
+#elif MB(TRIGORILLA_14)
+  #include "pins_TRIGORILLA_14.h"     // ATmega2560
+#elif MB(RAMPS_ENDER_4)
+  #include "pins_RAMPS_ENDER_4.h"     // ATmega2560
 
 //
 // Other ATmega1280, ATmega2560
@@ -179,8 +183,6 @@
   #include "pins_GT2560_REV_A.h"      // ATmega1280, ATmega2560
 #elif MB(GT2560_REV_A_PLUS)
   #include "pins_GT2560_REV_A_PLUS.h" // ATmega1280, ATmega2560
-#elif MB(RAMPS_ENDER_4)
-  #include "pins_RAMPS_ENDER_4.h"     // ATmega2560
 
 //
 // ATmega1281, ATmega2561

Marlin/src/pins/pins_SANGUINOLOLU_11.h

@@ -114,7 +114,7 @@
 
 #endif
 
-#if MB(AZTEEG_X1) || MB(STB_11) || MB(CREALITY_ENDER) || ENABLED(IS_MELZI)
+#if MB(AZTEEG_X1) || MB(STB_11) || ENABLED(IS_MELZI)
   #define FAN_PIN           4   // Works for Panelolu2 too
 #endif
 
@@ -187,7 +187,7 @@
         #define DOGLCD_CS       17
         #define LCD_BACKLIGHT_PIN 28   // PA3
 
-      #elif MB(CREALITY_ENDER)
+      #elif ENABLED(IS_MELZI)
 
         #define BEEPER_PIN      27
         #define DOGLCD_CS       28

Marlin/src/pins/pins_TRIGORILLA_13.h

@@ -0,0 +1,40 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino Mega with RAMPS v1.3 for Anycubic
+ */
+
+#ifndef BOARD_NAME
+  #define BOARD_NAME "Anycubic RAMPS 1.3"
+#endif
+
+#define IS_RAMPS_EFB
+#define RAMPS_D9_PIN       44
+#define ORIG_E0_AUTO_FAN_PIN RAMPS_D9_PIN
+
+#include "pins_RAMPS_13.h"
+
+#undef E1_STEP_PIN
+#undef E1_DIR_PIN
+#undef E1_ENABLE_PIN
+#undef E1_CS_PIN

Marlin/src/pins/pins_TRIGORILLA_14.h

@@ -22,9 +22,6 @@
 
 /**
  * Arduino Mega with RAMPS v1.4 for Anycubic
- *
- * Defines RAMPS_D44_PIN 44
- * Defines FAN_PIN RAMPS_D44_PIN or -1
  */
 
 #ifndef BOARD_NAME
@@ -35,12 +32,7 @@
 
 #include "pins_RAMPS_13.h"
 
-#undef FAN_PIN
+#define FAN2_PIN           44
-#define RAMPS_D44_PIN      44
-#define FAN_PIN            RAMPS_D44_PIN
-
-#undef ORIG_E0_AUTO_FAN_PIN
-#define ORIG_E0_AUTO_FAN_PIN RAMPS_D44_PIN
 
 #undef E1_STEP_PIN
 #undef E1_DIR_PIN