microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Add option to enable/disable autoretract altogether (#11904)

Browse Source
2.0.x
Victor Tseng 6 years ago committed by Scott Lahteine
parent ad21a4f07b
commit 93839e2f73
63 changed files with 392 additions and 197 deletions
Show Stats Download Patch File Download Diff File

5
Marlin/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/default/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Anet/A2/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
Unescape Escape View File

@ -1001,10 +1001,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Cartesio/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Einstart-S/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Felix/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

7
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
Unescape Escape View File

@ -995,10 +995,17 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
<<<<<<< HEAD:Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
#define FWRETRACT // ONLY PARTIALLY TESTED #define FWRETRACT // ONLY PARTIALLY TESTED
=======
//#define FWRETRACT
>>>>>>> patch:Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
Unescape Escape View File

@ -997,10 +997,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
Unescape Escape View File

@ -998,10 +998,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/MakerParts/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
Unescape Escape View File

@ -1001,10 +1001,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/RigidBot/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/SCARA/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 35 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 35 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/TheBorg/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
Unescape Escape View File

@ -1006,10 +1006,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
Unescape Escape View File

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
Unescape Escape View File

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
Unescape Escape View File

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
Unescape Escape View File

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
Unescape Escape View File

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/delta/generic/Configuration_adv.h
Unescape Escape View File

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
Unescape Escape View File

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
Unescape Escape View File

@ -995,10 +995,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/makibox/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
Unescape Escape View File

@ -993,10 +993,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

5
Marlin/src/config/examples/wt150/Configuration_adv.h
Unescape Escape View File

@ -994,10 +994,13 @@
* Note that M207 / M208 / M209 settings are saved to EEPROM. * Note that M207 / M208 / M209 settings are saved to EEPROM.
* *
*/ */
//#define FWRETRACT // ONLY PARTIALLY TESTED //#define FWRETRACT
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
#if ENABLED(FWRETRACT_AUTORETRACT)
#define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
#define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
#endif
#define RETRACT_LENGTH 3 // Default retract length (positive mm) #define RETRACT_LENGTH 3 // Default retract length (positive mm)
#define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
#define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)

2
Marlin/src/feature/fwretract.h
Unescape Escape View File

@ -58,8 +58,10 @@ public:
} }
static void enable_autoretract(const bool enable) { static void enable_autoretract(const bool enable) {
#if ENABLED(FWRETRACT_AUTORETRACT)
autoretract_enabled = enable; autoretract_enabled = enable;
refresh_autoretract(); refresh_autoretract();
#endif
} }
static void retract(const bool retracting static void retract(const bool retracting

9
Marlin/src/gcode/feature/fwretract/M207-M209.cpp
Unescape Escape View File

@ -57,17 +57,18 @@ void GcodeSuite::M208() {
if (parser.seen('W')) fwretract.swap_retract_recover_length = parser.value_axis_units(E_AXIS); if (parser.seen('W')) fwretract.swap_retract_recover_length = parser.value_axis_units(E_AXIS);
} }
#if ENABLED(FWRETRACT_AUTORETRACT)
/** /**
* M209: Enable automatic retract (M209 S1) * M209: Enable automatic retract (M209 S1)
* For slicers that don't support G10/11, reversed extrude-only * For slicers that don't support G10/11, reversed extrude-only
* moves will be classified as retraction. * moves will be classified as retraction.
*/ */
void GcodeSuite::M209() { void GcodeSuite::M209() {
if (MIN_AUTORETRACT <= MAX_AUTORETRACT) { if (MIN_AUTORETRACT <= MAX_AUTORETRACT && parser.seen('S'))
if (parser.seen('S')) {
fwretract.enable_autoretract(parser.value_bool()); fwretract.enable_autoretract(parser.value_bool());
} }
}
} #endif // FWRETRACT_AUTORETRACT
#endif // FWRETRACT #endif // FWRETRACT

2
Marlin/src/gcode/gcode.cpp
Unescape Escape View File

@ -474,10 +474,12 @@ void GcodeSuite::process_parsed_command(
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
case 207: M207(); break; // M207: Set Retract Length, Feedrate, and Z lift case 207: M207(); break; // M207: Set Retract Length, Feedrate, and Z lift
case 208: M208(); break; // M208: Set Recover (unretract) Additional Length and Feedrate case 208: M208(); break; // M208: Set Recover (unretract) Additional Length and Feedrate
#if ENABLED(FWRETRACT_AUTORETRACT)
case 209: case 209:
if (MIN_AUTORETRACT <= MAX_AUTORETRACT) M209(); // M209: Turn Automatic Retract Detection on/off if (MIN_AUTORETRACT <= MAX_AUTORETRACT) M209(); // M209: Turn Automatic Retract Detection on/off
break; break;
#endif #endif
#endif
case 211: M211(); break; // M211: Enable, Disable, and/or Report software endstops case 211: M211(); break; // M211: Enable, Disable, and/or Report software endstops

4
Marlin/src/gcode/gcode.h
Unescape Escape View File

@ -161,7 +161,7 @@
* M206 - Set additional homing offset. (Disabled by NO_WORKSPACE_OFFSETS or DELTA) * M206 - Set additional homing offset. (Disabled by NO_WORKSPACE_OFFSETS or DELTA)
* M207 - Set Retract Length: S<length>, Feedrate: F<units/min>, and Z lift: Z<distance>. (Requires FWRETRACT) * M207 - Set Retract Length: S<length>, Feedrate: F<units/min>, and Z lift: Z<distance>. (Requires FWRETRACT)
* M208 - Set Recover (unretract) Additional (!) Length: S<length> and Feedrate: F<units/min>. (Requires FWRETRACT) * M208 - Set Recover (unretract) Additional (!) Length: S<length> and Feedrate: F<units/min>. (Requires FWRETRACT)
* M209 - Turn Automatic Retract Detection on/off: S<0|1> (For slicers that don't support G10/11). (Requires FWRETRACT) * M209 - Turn Automatic Retract Detection on/off: S<0|1> (For slicers that don't support G10/11). (Requires FWRETRACT_AUTORETRACT)
Every normal extrude-only move will be classified as retract depending on the direction. Every normal extrude-only move will be classified as retract depending on the direction.
* M211 - Enable, Disable, and/or Report software endstops: S<0|1> (Requires MIN_SOFTWARE_ENDSTOPS or MAX_SOFTWARE_ENDSTOPS) * M211 - Enable, Disable, and/or Report software endstops: S<0|1> (Requires MIN_SOFTWARE_ENDSTOPS or MAX_SOFTWARE_ENDSTOPS)
* M218 - Set/get a tool offset: "M218 T<index> X<offset> Y<offset>". (Requires 2 or more extruders) * M218 - Set/get a tool offset: "M218 T<index> X<offset> Y<offset>". (Requires 2 or more extruders)
@ -605,8 +605,10 @@ private:
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
static void M207(); static void M207();
static void M208(); static void M208();
#if ENABLED(FWRETRACT_AUTORETRACT)
static void M209(); static void M209();
#endif #endif
#endif
static void M211(); static void M211();

4
Marlin/src/gcode/motion/G0_G1.cpp
Unescape Escape View File

@ -25,7 +25,7 @@
#include "../../Marlin.h" #include "../../Marlin.h"
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
#include "../../feature/fwretract.h" #include "../../feature/fwretract.h"
#endif #endif
@ -54,7 +54,7 @@ void GcodeSuite::G0_G1(
if (IsRunning() && G0_G1_CONDITION) { if (IsRunning() && G0_G1_CONDITION) {
get_destination_from_command(); // For X Y Z E F get_destination_from_command(); // For X Y Z E F
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT) && ENABLED(FWRETRACT_AUTORETRACT)
if (MIN_AUTORETRACT <= MAX_AUTORETRACT) { if (MIN_AUTORETRACT <= MAX_AUTORETRACT) {
// When M209 Autoretract is enabled, convert E-only moves to firmware retract/recover moves // When M209 Autoretract is enabled, convert E-only moves to firmware retract/recover moves

2
Marlin/src/lcd/ultralcd.cpp
Unescape Escape View File

@ -4147,7 +4147,9 @@ void lcd_quick_feedback(const bool clear_buttons) {
void lcd_config_retract_menu() { void lcd_config_retract_menu() {
START_MENU(); START_MENU();
MENU_BACK(MSG_CONTROL); MENU_BACK(MSG_CONTROL);
#if ENABLED(FWRETRACT_AUTORETRACT)
MENU_ITEM_EDIT_CALLBACK(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract); MENU_ITEM_EDIT_CALLBACK(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract);
#endif
MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT, &fwretract.retract_length, 0, 100); MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT, &fwretract.retract_length, 0, 100);
#if EXTRUDERS > 1 #if EXTRUDERS > 1
MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_SWAP, &fwretract.swap_retract_length, 0, 100); MENU_ITEM_EDIT(float52sign, MSG_CONTROL_RETRACT_SWAP, &fwretract.swap_retract_length, 0, 100);

22
Marlin/src/module/configuration_store.cpp
Unescape Escape View File

@ -672,13 +672,19 @@ void MarlinSettings::postprocess() {
#endif #endif
EEPROM_WRITE(lcd_contrast); EEPROM_WRITE(lcd_contrast);
const bool autoretract_enabled =
#if DISABLED(FWRETRACT_AUTORETRACT)
false
#else
fwretract.autoretract_enabled
#endif
;
EEPROM_WRITE(autoretract_enabled);
#if DISABLED(FWRETRACT) #if DISABLED(FWRETRACT)
const bool autoretract_enabled = false;
const float autoretract_defaults[] = { 3, 45, 0, 0, 0, 13, 0, 8 }; const float autoretract_defaults[] = { 3, 45, 0, 0, 0, 13, 0, 8 };
EEPROM_WRITE(autoretract_enabled);
EEPROM_WRITE(autoretract_defaults); EEPROM_WRITE(autoretract_defaults);
#else #else
EEPROM_WRITE(fwretract.autoretract_enabled);
EEPROM_WRITE(fwretract.retract_length); EEPROM_WRITE(fwretract.retract_length);
EEPROM_WRITE(fwretract.retract_feedrate_mm_s); EEPROM_WRITE(fwretract.retract_feedrate_mm_s);
EEPROM_WRITE(fwretract.retract_zlift); EEPROM_WRITE(fwretract.retract_zlift);
@ -1070,7 +1076,7 @@ void MarlinSettings::postprocess() {
} }
else { else {
float dummy = 0; float dummy = 0;
#if DISABLED(AUTO_BED_LEVELING_UBL) || DISABLED(FWRETRACT) || ENABLED(NO_VOLUMETRICS) #if DISABLED(AUTO_BED_LEVELING_UBL) || DISABLED(FWRETRACT) || DISABLED(FWRETRACT_AUTORETRACT) || ENABLED(NO_VOLUMETRICS)
bool dummyb; bool dummyb;
#endif #endif
@ -1374,7 +1380,11 @@ void MarlinSettings::postprocess() {
// //
#if ENABLED(FWRETRACT) #if ENABLED(FWRETRACT)
#if DISABLED(FWRETRACT_AUTORETRACT)
EEPROM_READ(dummyb);
#else
EEPROM_READ(fwretract.autoretract_enabled); EEPROM_READ(fwretract.autoretract_enabled);
#endif
EEPROM_READ(fwretract.retract_length); EEPROM_READ(fwretract.retract_length);
EEPROM_READ(fwretract.retract_feedrate_mm_s); EEPROM_READ(fwretract.retract_feedrate_mm_s);
EEPROM_READ(fwretract.retract_zlift); EEPROM_READ(fwretract.retract_zlift);
@ -2620,6 +2630,8 @@ void MarlinSettings::reset(PORTARG_SOLO) {
SERIAL_ECHOPAIR_P(port, " W", LINEAR_UNIT(fwretract.swap_retract_recover_length)); SERIAL_ECHOPAIR_P(port, " W", LINEAR_UNIT(fwretract.swap_retract_recover_length));
SERIAL_ECHOLNPAIR_P(port, " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.retract_recover_feedrate_mm_s))); SERIAL_ECHOLNPAIR_P(port, " F", MMS_TO_MMM(LINEAR_UNIT(fwretract.retract_recover_feedrate_mm_s)));
#if ENABLED(FWRETRACT_AUTORETRACT)
if (!forReplay) { if (!forReplay) {
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPGM_P(port, "Auto-Retract: S=0 to disable, 1 to interpret E-only moves as retract/recover"); SERIAL_ECHOLNPGM_P(port, "Auto-Retract: S=0 to disable, 1 to interpret E-only moves as retract/recover");
@ -2627,6 +2639,8 @@ void MarlinSettings::reset(PORTARG_SOLO) {
CONFIG_ECHO_START; CONFIG_ECHO_START;
SERIAL_ECHOLNPAIR_P(port, " M209 S", fwretract.autoretract_enabled ? 1 : 0); SERIAL_ECHOLNPAIR_P(port, " M209 S", fwretract.autoretract_enabled ? 1 : 0);
#endif // FWRETRACT_AUTORETRACT
#endif // FWRETRACT #endif // FWRETRACT
/** /**

Write Preview
Loading…
Cancel
Save