MKS Robin Nano board support (#14363)
thisiskeithb
6 years ago
committed by
Scott Lahteine
parent
81209f5310
commit
8b63e3701f
@ -0,0 +1,118 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* MKS Robin nano (STM32F130VET6) board pin assignments
|
||||
*/
|
||||
|
||||
#ifndef __STM32F1__
|
||||
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
||||
#endif
|
||||
|
||||
#if HOTENDS > 2 || E_STEPPERS > 2
|
||||
#error "MKS Robin nano supports up to 2 hotends / E-steppers. Comment out this line to continue."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "MKS Robin nano"
|
||||
|
||||
//
|
||||
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
|
||||
//
|
||||
#define DISABLE_DEBUG
|
||||
|
||||
//
|
||||
// Note: MKS Robin board is using SPI2 interface.
|
||||
//
|
||||
#define SPI_MODULE 2
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_STOP_PIN PA15
|
||||
#define Y_STOP_PIN PA12
|
||||
#define Z_MIN_PIN PA11
|
||||
#define Z_MAX_PIN PC4
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_ENABLE_PIN PE4
|
||||
#define X_STEP_PIN PE3
|
||||
#define X_DIR_PIN PE2
|
||||
|
||||
#define Y_ENABLE_PIN PE1
|
||||
#define Y_STEP_PIN PE0
|
||||
#define Y_DIR_PIN PB9
|
||||
|
||||
#define Z_ENABLE_PIN PB8
|
||||
#define Z_STEP_PIN PB5
|
||||
#define Z_DIR_PIN PB4
|
||||
|
||||
#define E0_ENABLE_PIN PB3
|
||||
#define E0_STEP_PIN PD6
|
||||
#define E0_DIR_PIN PD3
|
||||
|
||||
#define E1_ENABLE_PIN PA3
|
||||
#define E1_STEP_PIN PA6
|
||||
#define E1_DIR_PIN PA1
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PC1 // TH1
|
||||
#define TEMP_1_PIN PC2 // TH2
|
||||
#define TEMP_BED_PIN PC0 // TB1
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN PC3 // HEATER1
|
||||
#define HEATER_1_PIN PB0 // HEATER2
|
||||
#define HEATER_BED_PIN PA0 // HOT BED
|
||||
|
||||
#define FAN_PIN PA1 // FAN
|
||||
|
||||
#define BTN_ENC PC13 // Pin is not connected. Real pin is needed to enable encoder's push button functionality used by touch screen
|
||||
|
||||
//#define MAX6675_SS_PIN PE5 // TC1 - CS1
|
||||
//#define MAX6675_SS_PIN PE6 // TC2 - CS2
|
||||
|
||||
#define POWER_LOSS_PIN PA2 // PW_DET
|
||||
#define PS_ON_PIN PA3 // PW_OFF
|
||||
#define FIL_RUNOUT_PIN PA4 // MT_DET
|
||||
|
||||
#define BEEPER_PIN PC5
|
||||
#define LED_PIN PB2
|
||||
|
||||
/**
|
||||
* Note: MKS Robin TFT screens may have different TFT controllers
|
||||
* If the screen stays white, disable 'LCD_RESET_PIN' to rely on the bootloader to do screen initialization.
|
||||
*/
|
||||
#define LCD_RESET_PIN PF6
|
||||
#define NO_LCD_REINIT // Suppress LCD re-initialization
|
||||
|
||||
#define LCD_BACKLIGHT_PIN PD13
|
||||
#define FSMC_CS_PIN PD7 // NE4
|
||||
#define FSMC_RS_PIN PD11 // A0
|
||||
#define TOUCH_CS PA7
|
||||
|
||||
#define SD_DETECT_PIN PD12
|
||||
@ -0,0 +1,14 @@
|
||||
MEMORY
|
||||
{
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - 40
|
||||
rom (rx) : ORIGIN = 0x08007000, LENGTH = 512K - 28K
|
||||
}
|
||||
|
||||
/* Provide memory region aliases for common.inc */
|
||||
REGION_ALIAS("REGION_TEXT", rom);
|
||||
REGION_ALIAS("REGION_DATA", ram);
|
||||
REGION_ALIAS("REGION_BSS", ram);
|
||||
REGION_ALIAS("REGION_RODATA", rom);
|
||||
|
||||
/* Let common.inc handle the real work. */
|
||||
INCLUDE common.inc
|
||||
@ -0,0 +1,30 @@
|
||||
Import("env")
|
||||
|
||||
# Relocate firmware from 0x08000000 to 0x08007000
|
||||
for define in env['CPPDEFINES']:
|
||||
if define[0] == "VECT_TAB_ADDR":
|
||||
env['CPPDEFINES'].remove(define)
|
||||
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08007000"))
|
||||
env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/mks_robin_nano.ld")
|
||||
|
||||
# Encrypt ${PROGNAME}.bin and save it as 'Robin_nano.bin'
|
||||
def encrypt(source, target, env):
|
||||
import os
|
||||
|
||||
key = [0xA3, 0xBD, 0xAD, 0x0D, 0x41, 0x11, 0xBB, 0x8D, 0xDC, 0x80, 0x2D, 0xD0, 0xD2, 0xC4, 0x9B, 0x1E, 0x26, 0xEB, 0xE3, 0x33, 0x4A, 0x15, 0xE4, 0x0A, 0xB3, 0xB1, 0x3C, 0x93, 0xBB, 0xAF, 0xF7, 0x3E]
|
||||
|
||||
firmware = open(target[0].path, "rb")
|
||||
robin = open(target[0].dir.path +'/Robin_nano.bin', "wb")
|
||||
length = os.path.getsize(target[0].path)
|
||||
position = 0
|
||||
try:
|
||||
while position < length:
|
||||
byte = firmware.read(1)
|
||||
if position >= 320 and position < 31040:
|
||||
byte = chr(ord(byte) ^ key[position & 31])
|
||||
robin.write(byte)
|
||||
position += 1
|
||||
finally:
|
||||
firmware.close()
|
||||
robin.close()
|
||||
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt);
|
||||
Loading…
Reference in New Issue