|
|
|
|
@ -34,6 +34,8 @@
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
// numbers in parenthesis () are the mega2560 equivalent pin numbers
|
|
|
|
|
|
|
|
|
|
#ifndef TARGET_LPC1768
|
|
|
|
|
#error "Oops! Make sure you have LPC1768 selected."
|
|
|
|
|
#endif
|
|
|
|
|
@ -47,60 +49,60 @@
|
|
|
|
|
//
|
|
|
|
|
// Servos
|
|
|
|
|
//
|
|
|
|
|
#define SERVO0_PIN P1_20
|
|
|
|
|
#define SERVO1_PIN P1_21 // also on J5-1
|
|
|
|
|
#define SERVO2_PIN P1_19
|
|
|
|
|
#define SERVO3_PIN P1_18 // 5V output - PWM capable
|
|
|
|
|
#define SERVO0_PIN P1_20 // (11)
|
|
|
|
|
#define SERVO1_PIN P1_21 // ( 6) also on J5-1
|
|
|
|
|
#define SERVO2_PIN P1_19 // ( 5)
|
|
|
|
|
#define SERVO3_PIN P1_18 // ( 4) 5V output
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Limit Switches
|
|
|
|
|
//
|
|
|
|
|
#define X_MIN_PIN P1_24 //10k pullup to 3.3V, 1K series
|
|
|
|
|
#define X_MAX_PIN P1_25 //10k pullup to 3.3V, 1K series
|
|
|
|
|
#define Y_MIN_PIN P1_26 //10k pullup to 3.3V, 1K series
|
|
|
|
|
#define Y_MAX_PIN P1_27 //10k pullup to 3.3V, 1K series
|
|
|
|
|
#define Z_MIN_PIN P1_29 //10k pullup to 3.3V, 1K series
|
|
|
|
|
#define Z_MAX_PIN P1_28 //10k pullup to 3.3V, 1K series
|
|
|
|
|
#define X_MIN_PIN P1_24 // ( 3) 10k pullup to 3.3V, 1K series
|
|
|
|
|
#define X_MAX_PIN P1_25 // ( 2) 10k pullup to 3.3V, 1K series
|
|
|
|
|
#define Y_MIN_PIN P1_26 // (14) 10k pullup to 3.3V, 1K series
|
|
|
|
|
#define Y_MAX_PIN P1_27 // (15) 10k pullup to 3.3V, 1K series
|
|
|
|
|
#define Z_MIN_PIN P1_29 // (18) 10k pullup to 3.3V, 1K series
|
|
|
|
|
#define Z_MAX_PIN P1_28 // (19) 10k pullup to 3.3V, 1K series
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Steppers
|
|
|
|
|
//
|
|
|
|
|
#define X_STEP_PIN P2_1
|
|
|
|
|
#define X_DIR_PIN P0_11
|
|
|
|
|
#define X_ENABLE_PIN P0_10
|
|
|
|
|
#define X_STEP_PIN P2_1 // (54)
|
|
|
|
|
#define X_DIR_PIN P0_11 // (55)
|
|
|
|
|
#define X_ENABLE_PIN P0_10 // (38)
|
|
|
|
|
|
|
|
|
|
#define Y_STEP_PIN P2_2
|
|
|
|
|
#define Y_DIR_PIN P0_20
|
|
|
|
|
#define Y_ENABLE_PIN P0_19
|
|
|
|
|
#define Y_STEP_PIN P2_2 // (60)
|
|
|
|
|
#define Y_DIR_PIN P0_20 // (61)
|
|
|
|
|
#define Y_ENABLE_PIN P0_19 // (56)
|
|
|
|
|
|
|
|
|
|
#define Z_STEP_PIN P2_3
|
|
|
|
|
#define Z_DIR_PIN P0_22
|
|
|
|
|
#define Z_ENABLE_PIN P0_21
|
|
|
|
|
#define Z_STEP_PIN P2_3 // (46)
|
|
|
|
|
#define Z_DIR_PIN P0_22 // (48)
|
|
|
|
|
#define Z_ENABLE_PIN P0_21 // (62)
|
|
|
|
|
|
|
|
|
|
#define E0_STEP_PIN P2_0
|
|
|
|
|
#define E0_DIR_PIN P0_5
|
|
|
|
|
#define E0_ENABLE_PIN P0_4
|
|
|
|
|
#define E0_STEP_PIN P2_0 // (26)
|
|
|
|
|
#define E0_DIR_PIN P0_5 // (28)
|
|
|
|
|
#define E0_ENABLE_PIN P0_4 // (24)
|
|
|
|
|
|
|
|
|
|
#define E1_STEP_PIN P2_8
|
|
|
|
|
#define E1_DIR_PIN P2_13
|
|
|
|
|
#define E1_ENABLE_PIN P4_29
|
|
|
|
|
#define E1_STEP_PIN P2_8 // (36)
|
|
|
|
|
#define E1_DIR_PIN P2_13 // (34)
|
|
|
|
|
#define E1_ENABLE_PIN P4_29 // (30)
|
|
|
|
|
|
|
|
|
|
#define E2_STEP_PIN P2_8
|
|
|
|
|
#define E2_DIR_PIN P2_13
|
|
|
|
|
#define E2_ENABLE_PIN P4_29
|
|
|
|
|
#define E2_STEP_PIN P2_8 // (36)
|
|
|
|
|
#define E2_DIR_PIN P2_13 // (34)
|
|
|
|
|
#define E2_ENABLE_PIN P4_29 // (30)
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Temperature Sensors
|
|
|
|
|
// 3.3V max when defined as an analog input
|
|
|
|
|
//
|
|
|
|
|
#define TEMP_0_PIN 0 //A0 (T0) - D67 - TEMP_0_PIN
|
|
|
|
|
#define TEMP_BED_PIN 1 //A1 (T1) - D68 - TEMP_BED_PIN
|
|
|
|
|
#define TEMP_1_PIN 2 //A2 (T2) - D69 - TEMP_1_PIN
|
|
|
|
|
#define TEMP_2_PIN 3 //A3 - D63 - J5-3 & AUX-2
|
|
|
|
|
#define TEMP_3_PIN 4 //A4 - D37 - BUZZER_PIN
|
|
|
|
|
//#define TEMP_4_PIN 5 //A5 - D49 - SD_DETECT_PIN
|
|
|
|
|
//#define ?? 6 //A6 - D0 - RXD0 - J4-4 & AUX-1
|
|
|
|
|
#define FILWIDTH_PIN 7 //A7 - D1 - TXD0 - J4-5 & AUX-1
|
|
|
|
|
#define TEMP_0_PIN 0 //A0 (T0) - (67) - TEMP_0_PIN
|
|
|
|
|
#define TEMP_BED_PIN 1 //A1 (T1) - (68) - TEMP_BED_PIN
|
|
|
|
|
#define TEMP_1_PIN 2 //A2 (T2) - (69) - TEMP_1_PIN
|
|
|
|
|
#define TEMP_2_PIN 3 //A3 - (63) - J5-3 & AUX-2
|
|
|
|
|
#define TEMP_3_PIN 4 //A4 - (37) - BUZZER_PIN
|
|
|
|
|
//#define TEMP_4_PIN 5 //A5 - (49) - SD_DETECT_PIN
|
|
|
|
|
//#define ?? 6 //A6 - ( 0) - RXD0 - J4-4 & AUX-1
|
|
|
|
|
#define FILWIDTH_PIN 7 //A7 - ( 1) - TXD0 - J4-5 & AUX-1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
@ -127,13 +129,13 @@
|
|
|
|
|
#define MOSFET_D_PIN -1
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef RAMPS_D8_PIN
|
|
|
|
|
#define RAMPS_D8_PIN P2_7
|
|
|
|
|
#define RAMPS_D8_PIN P2_7 // (8)
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef RAMPS_D9_PIN
|
|
|
|
|
#define RAMPS_D9_PIN P2_4
|
|
|
|
|
#define RAMPS_D9_PIN P2_4 // (9)
|
|
|
|
|
#endif
|
|
|
|
|
#ifndef RAMPS_D10_PIN
|
|
|
|
|
#define RAMPS_D10_PIN P2_5
|
|
|
|
|
#define RAMPS_D10_PIN P2_5 // (10)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define HEATER_0_PIN RAMPS_D10_PIN
|
|
|
|
|
@ -163,22 +165,22 @@
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef FAN_PIN
|
|
|
|
|
#define FAN_PIN P1_18 // IO pin. Buffer needed
|
|
|
|
|
#define FAN_PIN P1_18 // (4) IO pin. Buffer needed
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//
|
|
|
|
|
// Misc. Functions
|
|
|
|
|
//
|
|
|
|
|
#define LED_PIN P4_28
|
|
|
|
|
#define LED_PIN P4_28 // (13)
|
|
|
|
|
|
|
|
|
|
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
|
|
|
|
|
#define FIL_RUNOUT_PIN P1_18
|
|
|
|
|
#define FIL_RUNOUT_PIN P1_18 // (4)
|
|
|
|
|
|
|
|
|
|
#define PS_ON_PIN P2_12
|
|
|
|
|
#define PS_ON_PIN P2_12 // (12)
|
|
|
|
|
|
|
|
|
|
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENABLE_PIN)
|
|
|
|
|
#if !defined(NUM_SERVOS) || NUM_SERVOS < 4 // try to use servo connector
|
|
|
|
|
#define CASE_LIGHT_PIN P1_18 // MUST BE HARDWARE PWM
|
|
|
|
|
#define CASE_LIGHT_PIN P1_18 // (4) MUST BE HARDWARE PWM
|
|
|
|
|
#endif
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
@ -190,17 +192,17 @@
|
|
|
|
|
#undef SERVO1
|
|
|
|
|
#undef SERVO2
|
|
|
|
|
#undef SERVO3
|
|
|
|
|
#define SPINDLE_LASER_ENABLE_PIN P1_21 // Pin should have a pullup/pulldown!
|
|
|
|
|
#define SPINDLE_LASER_PWM_PIN P1_18 // MUST BE HARDWARE PWM
|
|
|
|
|
#define SPINDLE_DIR_PIN P1_19
|
|
|
|
|
#define SPINDLE_LASER_ENABLE_PIN P1_21 // (6) Pin should have a pullup/pulldown!
|
|
|
|
|
#define SPINDLE_LASER_PWM_PIN P1_18 // (4) MUST BE HARDWARE PWM
|
|
|
|
|
#define SPINDLE_DIR_PIN P1_19 // (5)
|
|
|
|
|
#endif
|
|
|
|
|
#endif
|
|
|
|
|
//
|
|
|
|
|
// Průša i3 MK2 Multiplexer Support
|
|
|
|
|
//
|
|
|
|
|
#define E_MUX0_PIN P0_3 // Z_CS_PIN
|
|
|
|
|
#define E_MUX1_PIN P0_2 // E0_CS_PIN
|
|
|
|
|
#define E_MUX2_PIN P0_26 // E1_CS_PIN
|
|
|
|
|
#define E_MUX0_PIN P0_3 // ( 0) Z_CS_PIN
|
|
|
|
|
#define E_MUX1_PIN P0_2 // ( 1) E0_CS_PIN
|
|
|
|
|
#define E_MUX2_PIN P0_26 // (63) E1_CS_PIN
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* LCD / Controller
|
|
|
|
|
@ -223,76 +225,76 @@
|
|
|
|
|
|
|
|
|
|
#if ENABLED(ULTRA_LCD)
|
|
|
|
|
|
|
|
|
|
#define BEEPER_PIN P1_30 // not 5V tolerant
|
|
|
|
|
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
|
|
|
|
|
|
|
|
|
|
#define BTN_EN1 P3_26 // J3-2 & AUX-4
|
|
|
|
|
#define BTN_EN2 P3_25 // J3-4 & AUX-4
|
|
|
|
|
#define BTN_ENC P2_11 // J3-3 & AUX-4
|
|
|
|
|
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
|
|
|
|
|
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
|
|
|
|
|
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
|
|
|
|
|
|
|
|
|
|
#define SD_DETECT_PIN P1_31 // not 5V tolerant J3-1 & AUX-3
|
|
|
|
|
#define KILL_PIN P1_22 // J5-4 & AUX-4
|
|
|
|
|
#define LCD_PINS_RS P0_16 // J3-7 & AUX-4
|
|
|
|
|
#define LCD_SDSS P0_16 // J3-7 & AUX-4
|
|
|
|
|
#define LCD_BACKLIGHT_PIN P0_16 // J3-7 & AUX-4 - only used on DOGLCD controllers
|
|
|
|
|
#define LCD_PINS_ENABLE P0_18 // (MOSI) J3-10 & AUX-3
|
|
|
|
|
#define LCD_PINS_D4 P0_15 // (SCK) J3-9 & AUX-3
|
|
|
|
|
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
|
|
|
|
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
|
|
|
|
|
#define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
|
|
|
|
|
#define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
|
|
|
|
|
#define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
|
|
|
|
|
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
|
|
|
|
|
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
|
|
|
|
|
|
|
|
|
|
#define DOGLCD_A0 P2_6 // J3-8 & AUX-2
|
|
|
|
|
#define DOGLCD_CS P0_26 // J5-3 & AUX-2
|
|
|
|
|
#define DOGLCD_A0 P2_6 // (59) J3-8 & AUX-2
|
|
|
|
|
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
|
|
|
|
|
|
|
|
|
|
#ifdef ULTIPANEL
|
|
|
|
|
#define LCD_PINS_D5 P1_17 // ENET_MDIO
|
|
|
|
|
#define LCD_PINS_D6 P1_14 // ENET_RX_ER
|
|
|
|
|
#define LCD_PINS_D7 P1_10 // ENET_RXD1
|
|
|
|
|
#define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
|
|
|
|
|
#define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
|
|
|
|
|
#define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if ENABLED(NEWPANEL)
|
|
|
|
|
#if ENABLED(REPRAPWORLD_KEYPAD)
|
|
|
|
|
#define SHIFT_OUT P0_18 // (MOSI) J3-10 & AUX-3
|
|
|
|
|
#define SHIFT_CLK P0_15 // (SCK) J3-9 & AUX-3
|
|
|
|
|
#define SHIFT_LD P1_31 // not 5V tolerant J3-1 & AUX-3
|
|
|
|
|
#define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
|
|
|
|
|
#define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
|
|
|
|
|
#define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
|
|
|
|
#endif
|
|
|
|
|
#else
|
|
|
|
|
//#define SHIFT_CLK P3_26 // J3-2 & AUX-4
|
|
|
|
|
//#define SHIFT_LD P3_25 // J3-4 & AUX-4
|
|
|
|
|
//#define SHIFT_OUT P2_11 // J3-3 & AUX-4
|
|
|
|
|
//#define SHIFT_EN P1_22 // J5-4 & AUX-4
|
|
|
|
|
//#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
|
|
|
|
|
//#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
|
|
|
|
|
//#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
|
|
|
|
|
//#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
|
|
|
|
// #define LCD_SCREEN_ROT_180
|
|
|
|
|
|
|
|
|
|
#undef BEEPER_PIN
|
|
|
|
|
#define BEEPER_PIN P1_30 // may change if cable changes
|
|
|
|
|
#define BEEPER_PIN P1_30 // (37) may change if cable changes
|
|
|
|
|
|
|
|
|
|
#define BTN_EN1 P3_26 // J3-2 & AUX-4
|
|
|
|
|
#define BTN_EN2 P3_25 // J3-4 & AUX-4
|
|
|
|
|
#define BTN_ENC P2_11 // J3-3 & AUX-4
|
|
|
|
|
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
|
|
|
|
|
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
|
|
|
|
|
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
|
|
|
|
|
|
|
|
|
|
#define SD_DETECT_PIN P1_31 // not 5V tolerant J3-1 & AUX-3
|
|
|
|
|
#define KILL_PIN P1_22 // J5-4 & AUX-4
|
|
|
|
|
#define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
|
|
|
|
|
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
|
|
|
|
|
|
|
|
|
|
#undef DOGLCD_CS
|
|
|
|
|
#define DOGLCD_CS P0_16
|
|
|
|
|
#undef LCD_BACKLIGHT_PIN //P0_16 // J3-7 & AUX-4 - only used on DOGLCD controllers
|
|
|
|
|
#undef LCD_PINS_ENABLE //P0_18 // (MOSI) J3-10 & AUX-3
|
|
|
|
|
#undef LCD_PINS_D4 //P0_15 // (SCK) J3-9 & AUX-3
|
|
|
|
|
|
|
|
|
|
#undef LCD_PINS_D5 //P2_6 // J3-8 & AUX-2
|
|
|
|
|
#define DOGLCD_A0 P2_6 // J3-8 & AUX-2
|
|
|
|
|
#undef LCD_PINS_D6 //P0_26 // J5-3 & AUX-2
|
|
|
|
|
#undef LCD_PINS_D7 //P1_21 // (SERVO1) J5-1 & SERVO connector
|
|
|
|
|
#define DOGLCD_CS P0_16 // (16)
|
|
|
|
|
#undef LCD_BACKLIGHT_PIN //P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
|
|
|
|
|
#undef LCD_PINS_ENABLE //P0_18 // (51) (MOSI) J3-10 & AUX-3
|
|
|
|
|
#undef LCD_PINS_D4 //P0_15 // (52) (SCK) J3-9 & AUX-3
|
|
|
|
|
|
|
|
|
|
#undef LCD_PINS_D5 //P2_6 // (59) J3-8 & AUX-2
|
|
|
|
|
#define DOGLCD_A0 P2_6 // (59) J3-8 & AUX-2
|
|
|
|
|
#undef LCD_PINS_D6 //P0_26 // (63) J5-3 & AUX-2
|
|
|
|
|
#undef LCD_PINS_D7 //P1_21 // ( 6) (SERVO1) J5-1 & SERVO connector
|
|
|
|
|
#define DOGLCD_SCK SCK_PIN
|
|
|
|
|
#define DOGLCD_MOSI MOSI_PIN
|
|
|
|
|
|
|
|
|
|
#define STAT_LED_BLUE_PIN P0_26 // may change if cable changes
|
|
|
|
|
#define STAT_LED_RED_PIN P1_21 // may change if cable changes
|
|
|
|
|
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
|
|
|
|
|
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
//#define MISO_PIN P0_17 // system defined J3-10 & AUX-3
|
|
|
|
|
//#define MOSI_PIN P0_18 // system defined J3-10 & AUX-3
|
|
|
|
|
//#define SCK_PIN P0_15 // system defined J3-9 & AUX-3
|
|
|
|
|
//#define SS_PIN P1_23 // system defined J3-5 & AUX-3 - sometimes called SDSS
|
|
|
|
|
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
|
|
|
|
|
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
|
|
|
|
|
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
|
|
|
|
|
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 - sometimes called SDSS
|
|
|
|
|
|
|
|
|
|
#if ENABLED(MINIPANEL)
|
|
|
|
|
// GLCD features
|
|
|
|
|
@ -309,44 +311,70 @@
|
|
|
|
|
// Ethernet pins
|
|
|
|
|
//
|
|
|
|
|
#ifndef ULTIPANEL
|
|
|
|
|
#define ENET_MDIO P1_17 // J12-4
|
|
|
|
|
#define ENET_RX_ER P1_14 // J12-6
|
|
|
|
|
#define ENET_RXD1 P1_10 // J12-8
|
|
|
|
|
#define ENET_MDIO P1_17 // (71) J12-4
|
|
|
|
|
#define ENET_RX_ER P1_14 // (73) J12-6
|
|
|
|
|
#define ENET_RXD1 P1_10 // (75) J12-8
|
|
|
|
|
#endif
|
|
|
|
|
#define ENET_MOC P1_16 // J12-3
|
|
|
|
|
#define REF_CLK P1_15 // J12-5
|
|
|
|
|
#define ENET_RXD0 P1_9 // J12-7
|
|
|
|
|
#define ENET_CRS P1_8 // J12-9
|
|
|
|
|
#define ENET_TX_EN P1_4 // J12-10
|
|
|
|
|
#define ENET_TXD0 P1_0 // J12-11
|
|
|
|
|
#define ENET_TXD1 P1_1 // J12-12
|
|
|
|
|
#define ENET_MOC P1_16 // (70) J12-3
|
|
|
|
|
#define REF_CLK P1_15 // (72) J12-5
|
|
|
|
|
#define ENET_RXD0 P1_9 // (74) J12-7
|
|
|
|
|
#define ENET_CRS P1_8 // (76) J12-9
|
|
|
|
|
#define ENET_TX_EN P1_4 // (77) J12-10
|
|
|
|
|
#define ENET_TXD0 P1_0 // (78) J12-11
|
|
|
|
|
#define ENET_TXD1 P1_1 // (79) J12-12
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* PWMS
|
|
|
|
|
* Fast PWMS
|
|
|
|
|
*
|
|
|
|
|
* The LPC1768's hardware PWM controller has 6 channels. Each channel
|
|
|
|
|
* can be setup to either control a dedicated pin directly or to generate
|
|
|
|
|
* an interrupt. The direct method's duty cycle is accurate to within a
|
|
|
|
|
* a microsecond. The interrupt method's average duty cycle has the
|
|
|
|
|
* the same accuracy but the individual cycles can vary because of higher
|
|
|
|
|
* priority interrupts.
|
|
|
|
|
*
|
|
|
|
|
* There are 6 PWMS. Each PWM can be assigned to one of two pins.
|
|
|
|
|
* All Fast PWMs have a 50Hz rate.
|
|
|
|
|
*
|
|
|
|
|
* SERVO2 does NOT have a PWM assigned to it.
|
|
|
|
|
* The following pins/signals use the direct method. All other pins use the
|
|
|
|
|
* the interrupt method. Note that SERVO2_PIN and RAMPS_D8_PIN use the
|
|
|
|
|
* interrupt method.
|
|
|
|
|
* P1_20 (11) SERVO0_PIN
|
|
|
|
|
* P1_21 ( 6) SERVO1_PIN J5-1
|
|
|
|
|
* P0_18 ( 4) SERVO3_PIN 5V output
|
|
|
|
|
* *P2_4 ( 9) RAMPS_D9_PIN
|
|
|
|
|
* *P2_5 (10) RAMPS_D10_PIN
|
|
|
|
|
*
|
|
|
|
|
* PWM1.1 P0_18 SERVO3_PIN FIL_RUNOUT_PIN 5V output, PWM
|
|
|
|
|
* PWM1.1 P2_0 E0_STEP_PIN
|
|
|
|
|
* PWM1.2 P1_20 SERVO0_PIN
|
|
|
|
|
* PWM1.2 P2_1 X_STEP_PIN
|
|
|
|
|
* PWM1.3 P1_21 SERVO1_PIN J5-1
|
|
|
|
|
* PWM1.3 P2_2 Y_STEP_PIN
|
|
|
|
|
* PWM1.4 P1_23 SDSS(SSEL0) J3-5 AUX-3
|
|
|
|
|
* PWM1.4 P2_3 Z_STEP_PIN
|
|
|
|
|
* PWM1.5 P1_24 X_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES
|
|
|
|
|
* PWM1.5 P2_4 RAMPS_D9_PIN
|
|
|
|
|
* PWM1.6 P1_26 Y_MIN_PIN 10K PULLUP TO 3.3v, 1K SERIES
|
|
|
|
|
* PWM1.6 P2_5 RAMPS_D10_PIN
|
|
|
|
|
* * - If used as a heater driver then a Fast PWM is NOT assigned. If used as
|
|
|
|
|
* a fan driver then enabling FAST_PWM_FAN assigns a Fast PWM to it.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* special pins
|
|
|
|
|
* P1_30 - not 5V tolerant
|
|
|
|
|
* P1_31 - not 5V tolerant
|
|
|
|
|
* P0_27 - open collector
|
|
|
|
|
* P0_28 - open collector
|
|
|
|
|
* P1_30 (37) - not 5V tolerant
|
|
|
|
|
* P1_31 (49) - not 5V tolerant
|
|
|
|
|
* P0_27 (57) - open collector
|
|
|
|
|
* P0_28 (58) - open collector
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* The following mega2560 pins are NOT available in a Re-ARM system
|
|
|
|
|
* 7
|
|
|
|
|
* 17
|
|
|
|
|
* 22
|
|
|
|
|
* 23
|
|
|
|
|
* 25
|
|
|
|
|
* 27
|
|
|
|
|
* 29
|
|
|
|
|
* 32
|
|
|
|
|
* 39
|
|
|
|
|
* 40
|
|
|
|
|
* 42
|
|
|
|
|
* 43
|
|
|
|
|
* 44
|
|
|
|
|
* 45
|
|
|
|
|
* 47
|
|
|
|
|
* 64
|
|
|
|
|
* 65
|
|
|
|
|
* 66
|
|
|
|
|
*/
|
Bob-the-Kuhn
7 years ago