microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Move and update heated chamber settings (#13671)

Browse Source 
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
2.0.x
Stephan 6 years ago committed by Scott Lahteine
parent 62b4265410
commit 84273557f9
176 changed files with 1255 additions and 756 deletions
Show Stats Download Patch File Download Diff File

7
Marlin/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
Marlin/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

2
Marlin/src/inc/Conditionals_post.h
Unescape Escape View File

@ -918,7 +918,7 @@
#define HAS_TEMP_HOTEND (HAS_TEMP_ADC_0 || ENABLED(HEATER_0_USES_MAX6675)) #define HAS_TEMP_HOTEND (HAS_TEMP_ADC_0 || ENABLED(HEATER_0_USES_MAX6675))
#define HAS_TEMP_BED HAS_TEMP_ADC_BED #define HAS_TEMP_BED HAS_TEMP_ADC_BED
#define HAS_TEMP_CHAMBER HAS_TEMP_ADC_CHAMBER #define HAS_TEMP_CHAMBER HAS_TEMP_ADC_CHAMBER
#define HAS_HEATED_CHAMBER (HAS_TEMP_CHAMBER && PIN_EXISTS(CHAMBER_HEATER)) #define HAS_HEATED_CHAMBER (HAS_TEMP_CHAMBER && PIN_EXISTS(HEATER_CHAMBER))
// Heaters // Heaters
#define HAS_HEATER_0 (PIN_EXISTS(HEATER_0)) #define HAS_HEATER_0 (PIN_EXISTS(HEATER_0))

2
Marlin/src/inc/SanityCheck.h
Unescape Escape View File

@ -343,6 +343,8 @@
#error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins." #error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins."
#elif defined(SPINDLE_LASER_ENABLE_PIN) #elif defined(SPINDLE_LASER_ENABLE_PIN)
#error "SPINDLE_LASER_ENABLE_PIN is now SPINDLE_LASER_ENA_PIN. Please update your configuration and/or pins." #error "SPINDLE_LASER_ENABLE_PIN is now SPINDLE_LASER_ENA_PIN. Please update your configuration and/or pins."
#elif defined(CHAMBER_HEATER_PIN)
#error "CHAMBER_HEATER_PIN is now HEATER_CHAMBER_PIN. Please update your configuration and/or pins."
#elif defined(TMC_Z_CALIBRATION) #elif defined(TMC_Z_CALIBRATION)
#error "TMC_Z_CALIBRATION has been deprecated in favor of Z_STEPPER_AUTO_ALIGN. Please update your configuration." #error "TMC_Z_CALIBRATION has been deprecated in favor of Z_STEPPER_AUTO_ALIGN. Please update your configuration."
#elif defined(Z_MIN_PROBE_ENDSTOP) #elif defined(Z_MIN_PROBE_ENDSTOP)

38
Marlin/src/module/temperature.cpp
Unescape Escape View File

@ -595,10 +595,23 @@ temp_range_t Temperature::temp_range[HOTENDS] = ARRAY_BY_HOTENDS(sensor_heater_0
Temperature::Temperature() { } Temperature::Temperature() { }
int Temperature::getHeaterPower(const int heater) { int16_t Temperature::getHeaterPower(const int8_t heater) {
return ( return (
#if HAS_HEATED_CHAMBER
#if HAS_HEATED_BED #if HAS_HEATED_BED
heater < 0 ? temp_bed.soft_pwm_amount : heater == -2
#else
heater < 0
#endif
? temp_chamber.soft_pwm_amount :
#endif
#if HAS_HEATED_BED
#if HAS_HEATED_CHAMBER
heater == -1
#else
heater < 0
#endif
? temp_bed.soft_pwm_amount :
#endif #endif
temp_hotend[heater].soft_pwm_amount temp_hotend[heater].soft_pwm_amount
); );
@ -1073,11 +1086,11 @@ void Temperature::manage_heater() {
if (WITHIN(temp_chamber.current, CHAMBER_MINTEMP, CHAMBER_MAXTEMP)) { if (WITHIN(temp_chamber.current, CHAMBER_MINTEMP, CHAMBER_MAXTEMP)) {
#if ENABLED(CHAMBER_LIMIT_SWITCHING) #if ENABLED(CHAMBER_LIMIT_SWITCHING)
if (temp_chamber.current >= temp_chamber.target + CHAMBER_HYSTERESIS) if (temp_chamber.current >= temp_chamber.target + TEMP_CHAMBER_HYSTERESIS)
temp_chamber.soft_pwm_amount = 0; temp_chamber.soft_pwm_amount = 0;
else if (temp_chamber.current <= temp_chamber.target - (CHAMBER_HYSTERESIS)) else if (temp_chamber.current <= temp_chamber.target - (TEMP_CHAMBER_HYSTERESIS))
temp_chamber.soft_pwm_amount = MAX_CHAMBER_POWER >> 1; temp_chamber.soft_pwm_amount = MAX_CHAMBER_POWER >> 1;
#else // !PIDTEMPCHAMBER && !CHAMBER_LIMIT_SWITCHING #else
temp_chamber.soft_pwm_amount = temp_chamber.current < temp_chamber.target ? MAX_CHAMBER_POWER >> 1 : 0; temp_chamber.soft_pwm_amount = temp_chamber.current < temp_chamber.target ? MAX_CHAMBER_POWER >> 1 : 0;
#endif #endif
} }
@ -2017,11 +2030,7 @@ void Temperature::readings_ready() {
#else #else
#define CHAMBERCMP(A,B) ((A)>=(B)) #define CHAMBERCMP(A,B) ((A)>=(B))
#endif #endif
const bool chamber_on = (temp_chamber.target > 0) const bool chamber_on = (temp_chamber.target > 0);
#if ENABLED(PIDTEMPCHAMBER)
|| (temp_chamber.soft_pwm_amount > 0)
#endif
;
if (CHAMBERCMP(temp_chamber.raw, maxtemp_raw_CHAMBER)) max_temp_error(-2); if (CHAMBERCMP(temp_chamber.raw, maxtemp_raw_CHAMBER)) max_temp_error(-2);
if (chamber_on && CHAMBERCMP(mintemp_raw_CHAMBER, temp_chamber.raw)) min_temp_error(-2); if (chamber_on && CHAMBERCMP(mintemp_raw_CHAMBER, temp_chamber.raw)) min_temp_error(-2);
#endif #endif
@ -2602,11 +2611,12 @@ void Temperature::isr() {
, e , e
); );
#endif #endif
SERIAL_ECHOPGM(" @:"); SERIAL_ECHOPAIR(" @:", getHeaterPower(target_extruder));
SERIAL_ECHO(getHeaterPower(target_extruder));
#if HAS_HEATED_BED #if HAS_HEATED_BED
SERIAL_ECHOPGM(" B@:"); SERIAL_ECHOPAIR(" B@:", getHeaterPower(-1));
SERIAL_ECHO(getHeaterPower(-1)); #endif
#if HAS_HEATED_CHAMBER
SERIAL_ECHOPAIR(" C@:", getHeaterPower(-2));
#endif #endif
#if HOTENDS > 1 #if HOTENDS > 1
HOTEND_LOOP() { HOTEND_LOOP() {

12
Marlin/src/module/temperature.h
Unescape Escape View File

@ -206,17 +206,11 @@ struct PIDHeaterInfo : public HeaterInfo {
typedef heater_info_t bed_info_t; typedef heater_info_t bed_info_t;
#endif #endif
#endif #endif
#if HAS_TEMP_CHAMBER
#if HAS_HEATED_CHAMBER #if HAS_HEATED_CHAMBER
#if ENABLED(PIDTEMPCHAMBER)
typedef struct PIDHeaterInfo<PID_t> chamber_info_t;
#else
typedef heater_info_t chamber_info_t; typedef heater_info_t chamber_info_t;
#endif #elif HAS_TEMP_CHAMBER
#else
typedef temp_info_t chamber_info_t; typedef temp_info_t chamber_info_t;
#endif #endif
#endif
// Heater idle handling // Heater idle handling
typedef struct { typedef struct {
@ -339,9 +333,7 @@ class Temperature {
#if WATCH_CHAMBER #if WATCH_CHAMBER
static heater_watch_t watch_chamber; static heater_watch_t watch_chamber;
#endif #endif
#if DISABLED(PIDTEMPCHAMBER)
static millis_t next_chamber_check_ms; static millis_t next_chamber_check_ms;
#endif
#ifdef CHAMBER_MINTEMP #ifdef CHAMBER_MINTEMP
static int16_t mintemp_raw_CHAMBER; static int16_t mintemp_raw_CHAMBER;
#endif #endif
@ -653,7 +645,7 @@ class Temperature {
/** /**
* The software PWM power for a heater * The software PWM power for a heater
*/ */
static int getHeaterPower(const int heater); static int16_t getHeaterPower(const int8_t heater);
/** /**
* Switch off all heaters, set all target temperatures to 0 * Switch off all heaters, set all target temperatures to 0

2
buildroot/share/tests/megaatmega2560-tests
Unescape Escape View File

@ -42,7 +42,7 @@ opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING EEPROM_SETTINGS \
MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING BACKLASH_COMPENSATION BACKLASH_GCODE MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING BACKLASH_COMPENSATION BACKLASH_GCODE
opt_enable SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER opt_enable SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER
opt_set TEMP_SENSOR_CHAMBER 3 opt_set TEMP_SENSOR_CHAMBER 3
opt_set CHAMBER_HEATER_PIN 45 opt_set HEATER_CHAMBER_PIN 45
exec_test $1 $2 "RAMPS with 2 extruders, RRDFGSC, Linear ABL, LEDs, and many options" exec_test $1 $2 "RAMPS with 2 extruders, RRDFGSC, Linear ABL, LEDs, and many options"
# #

7
config/default/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/default/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/3DFabXYZ/Migbot/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -481,7 +476,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/AlephObjects/TAZ4/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 7 #define TEMP_SENSOR_BED 7
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 250 #define HEATER_4_MAXTEMP 250
#define HEATER_5_MAXTEMP 250 #define HEATER_5_MAXTEMP 250
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -485,7 +480,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/AlephObjects/TAZ4/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/AliExpress/CL-260/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

7
config/examples/AliExpress/UM2pExt/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 20 #define TEMP_SENSOR_BED 20
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 130 #define BED_MAXTEMP 130
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -487,7 +482,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/AliExpress/UM2pExt/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Anet/A2/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_BED 5
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Anet/A2/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Anet/A2plus/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_BED 5
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Anet/A2plus/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Anet/A6/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_BED 11
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 130 #define BED_MAXTEMP 130
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -487,7 +482,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Anet/A6/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Anet/A8/Configuration.h
Unescape Escape View File

@ -392,7 +392,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_BED 5
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -411,8 +410,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -422,7 +419,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -434,7 +430,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 130 #define BED_MAXTEMP 130
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -483,7 +478,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Anet/A8/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/AnyCubic/i3/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -481,7 +476,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/AnyCubic/i3/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/ArmEd/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 13 #define TEMP_SENSOR_BED 13
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/ArmEd/Configuration_adv.h
Unescape Escape View File

@ -54,6 +54,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -131,8 +144,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Azteeg/X5GT/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

7
config/examples/BIBO/TouchX/cyclops/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_BED 5
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 115 #define BED_MAXTEMP 115
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/BIBO/TouchX/default/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 60 #define TEMP_SENSOR_BED 60
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 115 #define BED_MAXTEMP 115
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/BIBO/TouchX/default/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/BQ/Hephestos/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 260 #define HEATER_4_MAXTEMP 260
#define HEATER_5_MAXTEMP 260 #define HEATER_5_MAXTEMP 260
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -464,7 +459,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/BQ/Hephestos/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/BQ/Hephestos_2/Configuration.h
Unescape Escape View File

@ -399,7 +399,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -418,8 +417,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -429,7 +426,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -441,7 +437,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 100 #define BED_MAXTEMP 100
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -477,7 +472,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/BQ/Hephestos_2/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/BQ/WITBOX/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 260 #define HEATER_4_MAXTEMP 260
#define HEATER_5_MAXTEMP 260 #define HEATER_5_MAXTEMP 260
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -464,7 +459,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/BQ/WITBOX/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Cartesio/Configuration.h
Unescape Escape View File

@ -392,7 +392,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -411,8 +410,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -422,7 +419,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -434,7 +430,6 @@
#define HEATER_4_MAXTEMP 415 #define HEATER_4_MAXTEMP 415
#define HEATER_5_MAXTEMP 415 #define HEATER_5_MAXTEMP 415
#define BED_MAXTEMP 165 #define BED_MAXTEMP 165
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -477,7 +472,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Cartesio/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Creality/CR-10/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_BED 5
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 120 #define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -481,7 +476,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Creality/CR-10/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Creality/CR-10S/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_BED 5
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 120 #define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Creality/CR-10S/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Creality/CR-10_5S/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_BED 5
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 120 #define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Creality/CR-10_5S/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Creality/CR-10mini/Configuration.h
Unescape Escape View File

@ -400,7 +400,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_BED 5
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -419,8 +418,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -430,7 +427,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -442,7 +438,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 120 #define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -490,7 +485,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Creality/CR-10mini/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Creality/CR-8/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -481,7 +476,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Creality/CR-8/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Creality/Ender-2/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 75 #define BED_MAXTEMP 75
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -480,7 +475,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Creality/Ender-2/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Creality/Ender-3/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 125 #define BED_MAXTEMP 125
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -480,7 +475,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Creality/Ender-3/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Creality/Ender-4/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -481,7 +476,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Creality/Ender-4/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Einstart-S/Configuration.h
Unescape Escape View File

@ -393,7 +393,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -412,8 +411,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -423,7 +420,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -435,7 +431,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -484,7 +479,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Einstart-S/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Felix/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -464,7 +459,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Felix/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Felix/DUAL/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -464,7 +459,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

7
config/examples/FlashForge/CreatorPro/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -466,7 +461,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/FlashForge/CreatorPro/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/FolgerTech/i3-2020/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 245 #define HEATER_4_MAXTEMP 245
#define HEATER_5_MAXTEMP 245 #define HEATER_5_MAXTEMP 245
#define BED_MAXTEMP 115 #define BED_MAXTEMP 115
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -481,7 +476,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/FolgerTech/i3-2020/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Formbot/Raptor/Configuration.h
Unescape Escape View File

@ -436,7 +436,6 @@
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#endif #endif
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -455,8 +454,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -465,7 +462,6 @@
#define HEATER_3_MINTEMP 5 #define HEATER_3_MINTEMP 5
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -480,7 +476,6 @@
#else #else
#define BED_MAXTEMP 100 #define BED_MAXTEMP 100
#endif #endif
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -528,7 +523,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Formbot/Raptor/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Formbot/T_Rex_2+/Configuration.h
Unescape Escape View File

@ -406,7 +406,6 @@
#endif #endif
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -425,8 +424,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -436,7 +433,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -448,7 +444,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -498,7 +493,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Formbot/T_Rex_2+/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
#define PID_EXTRUSION_SCALING #define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Formbot/T_Rex_3/Configuration.h
Unescape Escape View File

@ -400,7 +400,6 @@
#endif #endif
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -419,8 +418,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -430,7 +427,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -442,7 +438,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -485,7 +480,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Formbot/T_Rex_3/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
#define PID_EXTRUSION_SCALING #define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Geeetech/A10M/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -466,7 +461,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Geeetech/A10M/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Geeetech/A20M/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -466,7 +461,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Geeetech/A20M/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Geeetech/GT2560/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -486,7 +481,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

7
config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

7
config/examples/Geeetech/MeCreator2/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -480,7 +475,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Geeetech/MeCreator2/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 125 #define BED_MAXTEMP 125
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -486,7 +481,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

7
config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 125 #define BED_MAXTEMP 125
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -486,7 +481,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

7
config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Infitary/i3-M508/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 125 #define BED_MAXTEMP 125
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -480,7 +475,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Infitary/i3-M508/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/JGAurora/A5/Configuration.h
Unescape Escape View File

@ -396,7 +396,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 // measured to be satisfactorily accurate on center of bed within +/- 1 degC. #define TEMP_SENSOR_BED 1 // measured to be satisfactorily accurate on center of bed within +/- 1 degC.
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -415,8 +414,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -426,7 +423,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -438,7 +434,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 120 #define BED_MAXTEMP 120
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -486,7 +481,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/JGAurora/A5/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/MakerParts/Configuration.h
Unescape Escape View File

@ -411,7 +411,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -430,8 +429,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -441,7 +438,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -453,7 +449,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -496,7 +491,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/MakerParts/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Malyan/M150/Configuration.h
Unescape Escape View File

@ -399,7 +399,6 @@
// The reasons are inconclusive so I leave at 1 // The reasons are inconclusive so I leave at 1
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -418,8 +417,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -429,7 +426,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -441,7 +437,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -484,7 +479,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Malyan/M150/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Malyan/M200/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_BED 11
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 100 #define BED_MAXTEMP 100
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -475,7 +470,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Malyan/M200/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Micromake/C1/basic/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

7
config/examples/Micromake/C1/enhanced/Configuration.h
Unescape Escape View File

@ -391,7 +391,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 0 #define TEMP_SENSOR_BED 0
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -410,8 +409,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -421,7 +418,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -433,7 +429,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -476,7 +471,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

17
config/examples/Micromake/C1/enhanced/Configuration_adv.h
Unescape Escape View File

@ -50,6 +50,19 @@
#define HEATER_BED_INVERTING true #define HEATER_BED_INVERTING true
#endif #endif
/**
* Heated Chamber settings
*/
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_INVERTING false
#endif
#if DISABLED(PIDTEMPBED) #if DISABLED(PIDTEMPBED)
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
#if ENABLED(BED_LIMIT_SWITCHING) #if ENABLED(BED_LIMIT_SWITCHING)
@ -127,8 +140,8 @@
#endif #endif
#if ENABLED(PIDTEMP) #if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed. // Add an experimental additional term to the heater power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated. // A well-chosen Kc value should add just enough power to melt the increased material volume.
//#define PID_EXTRUSION_SCALING //#define PID_EXTRUSION_SCALING
#if ENABLED(PID_EXTRUSION_SCALING) #if ENABLED(PID_EXTRUSION_SCALING)
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed) #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)

7
config/examples/Mks/Robin/Configuration.h
Unescape Escape View File

@ -392,7 +392,6 @@
#define TEMP_SENSOR_5 0 #define TEMP_SENSOR_5 0
#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_BED 1
#define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999 // Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_998_VALUE 25
@ -411,8 +410,6 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off // Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire. // because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
@ -422,7 +419,6 @@
#define HEATER_4_MINTEMP 5 #define HEATER_4_MINTEMP 5
#define HEATER_5_MINTEMP 5 #define HEATER_5_MINTEMP 5
#define BED_MINTEMP 5 #define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off. // Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures. // This can protect components from overheating, but NOT from shorts and failures.
@ -434,7 +430,6 @@
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define HEATER_5_MAXTEMP 275 #define HEATER_5_MAXTEMP 275
#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -477,7 +472,7 @@
#endif // PIDTEMP #endif // PIDTEMP
//=========================================================================== //===========================================================================
//============================= PID > Bed Temperature Control =============== //====================== PID > Bed Temperature Control ======================
//=========================================================================== //===========================================================================
/** /**

Some files were not shown because too many files have changed in this diff Show More

Write Preview
Loading…
Cancel
Save