Reverse SD card file name order.

This is _not_ automatically the cronological, since deleting a file will free
the filesystem descriptor for it, which then will be used by the next file copied on it.
Since this makes the auto0.g file very inaccessible, I put the option back, to have it in the prepare menu.

this should satisfy https://github.com/ErikZalm/Marlin/pull/373

as a reminder, auto0.g will be executed every time after a boot with sd card present and file present.
thereafter, if there is a file auto1.g this will be done. Thats IMHO the best place to put settings, and prepare heating.
I also execute again after each (now again via the prepare menu) before starting a new print/ after a failed one.
It for me 100% replaces any start.gcode form the slicers.

Marlin/Configuration_adv.h

@@ -257,6 +257,11 @@
 #define SD_FINISHED_STEPPERRELEASE true  //if sd support and the file is finished: disable steppers?
 #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
 
+#define SDCARD_RATHERRECENTFIRST  //reverse file order of sd card menu display. Its sorted practically after the filesystem block order. 
+// if a file is deleted, it frees a block. hence, the order is not purely cronological. To still have auto0.g accessible, there is again the option to do that.
+// using:
+//#define MENU_ADDAUTOSTART
+
 // The hardware watchdog should reset the Microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
 //#define USE_WATCHDOG
 
@@ -381,6 +386,12 @@ const unsigned int dropsegments=5; //everything with less than this number of st
   #endif
 #endif
 
+#ifdef FILAMENTCHANGEENABLE
+  #ifdef EXTRUDER_RUNOUT_PREVENT
+    #error EXTRUDER_RUNOUT_PREVENT currently incompatible with FILAMENTCHANGE
+  #endif 
+#endif
+ 
 //===========================================================================
 //=============================  Define Defines  ============================
 //===========================================================================

Marlin/ultralcd.cpp

@@ -420,7 +420,9 @@ static void lcd_prepare_menu()
     START_MENU();
     MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
 #ifdef SDSUPPORT
-    //MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
+    #ifdef MENU_ADDAUTOSTART
+      MENU_ITEM(function, MSG_AUTOSTART, lcd_autostart_sd);
+    #endif
 #endif
     MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
     MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
@@ -792,7 +794,11 @@ void lcd_sdcard_menu()
     {
         if (_menuItemNr == _lineNr)
         {
+            #ifndef SDCARD_RATHERRECENTFIRST
               card.getfilename(i);
+            #else
+              card.getfilename(fileCnt-1-i);
+            #endif
             if (card.filenameIsDir)
             {
                 MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename);