@ -426,6 +426,26 @@ static uint8_t target_extruder;
int lpq_len = 20 ;
# endif
# if ENABLED(HOST_KEEPALIVE_FEATURE)
// States for managing Marlin and host communication
// Marlin sends messages if blocked or busy
enum MarlinBusyState {
NOT_BUSY , // Not in a handler
IN_HANDLER , // Processing a GCode
IN_PROCESS , // Known to be blocking command input (as in G29)
PAUSED_FOR_USER , // Blocking pending any input
PAUSED_FOR_INPUT // Blocking pending text input (concept)
} ;
static MarlinBusyState busy_state = NOT_BUSY ;
static millis_t next_busy_signal_ms = - 1 ;
# define KEEPALIVE_STATE(n) do{ busy_state = n; }while(0)
# else
# define host_keepalive() ;
# define KEEPALIVE_STATE(n) ;
# endif // HOST_KEEPALIVE_FEATURE
//===========================================================================
//================================ Functions ================================
//===========================================================================
@ -2130,6 +2150,35 @@ void unknown_command_error() {
SERIAL_ECHOPGM ( " \" \n " ) ;
}
# if ENABLED(HOST_KEEPALIVE_FEATURE)
void host_keepalive ( ) {
millis_t ms = millis ( ) ;
if ( busy_state ! = NOT_BUSY ) {
if ( ms < next_busy_signal_ms ) return ;
switch ( busy_state ) {
case NOT_BUSY :
break ;
case IN_HANDLER :
case IN_PROCESS :
SERIAL_ECHO_START ;
SERIAL_ECHOLNPGM ( MSG_BUSY_PROCESSING ) ;
break ;
case PAUSED_FOR_USER :
SERIAL_ECHO_START ;
SERIAL_ECHOLNPGM ( MSG_BUSY_PAUSED_FOR_USER ) ;
break ;
case PAUSED_FOR_INPUT :
SERIAL_ECHO_START ;
SERIAL_ECHOLNPGM ( MSG_BUSY_PAUSED_FOR_INPUT ) ;
break ;
}
}
next_busy_signal_ms = ms + 2000UL ;
}
# endif //HOST_KEEPALIVE_FEATURE
/**
* G0 , G1 : Coordinated movement of X Y Z E axes
*/
@ -3219,6 +3268,8 @@ inline void gcode_G28() {
st_synchronize ( ) ;
# endif
KEEPALIVE_STATE ( IN_HANDLER ) ;
# if ENABLED(DEBUG_LEVELING_FEATURE)
if ( marlin_debug_flags & DEBUG_LEVELING ) {
SERIAL_ECHOLNPGM ( " <<< gcode_G29 " ) ;
@ -3325,12 +3376,16 @@ inline void gcode_G92() {
refresh_cmd_timeout ( ) ;
if ( codenum > 0 ) {
codenum + = previous_cmd_ms ; // wait until this time for a click
KEEPALIVE_STATE ( PAUSED_FOR_USER ) ;
while ( millis ( ) < codenum & & ! lcd_clicked ( ) ) idle ( ) ;
KEEPALIVE_STATE ( IN_HANDLER ) ;
lcd_ignore_click ( false ) ;
}
else {
if ( ! lcd_detected ( ) ) return ;
KEEPALIVE_STATE ( PAUSED_FOR_USER ) ;
while ( ! lcd_clicked ( ) ) idle ( ) ;
KEEPALIVE_STATE ( IN_HANDLER ) ;
}
if ( IS_SD_PRINTING )
LCD_MESSAGEPGM ( MSG_RESUMING ) ;
@ -4963,6 +5018,8 @@ inline void gcode_M303() {
if ( e > = 0 & & e < EXTRUDERS )
target_extruder = e ;
KEEPALIVE_STATE ( NOT_BUSY ) ;
PID_autotune ( temp , e , c ) ;
}
@ -5334,6 +5391,13 @@ inline void gcode_M503() {
# if ENABLED(FILAMENTCHANGEENABLE)
inline void idle2 ( ) {
manage_heater ( ) ;
manage_inactivity ( true ) ;
host_keepalive ( ) ;
lcd_update ( ) ;
}
/**
* M600 : Pause for filament change
*
@ -5412,6 +5476,7 @@ inline void gcode_M503() {
delay ( 100 ) ;
LCD_ALERTMESSAGEPGM ( MSG_FILAMENTCHANGE ) ;
millis_t next_tick = 0 ;
KEEPALIVE_STATE ( WAIT_FOR_USER ) ;
while ( ! lcd_clicked ( ) ) {
# if DISABLED(AUTO_FILAMENT_CHANGE)
millis_t ms = millis ( ) ;
@ -5419,9 +5484,7 @@ inline void gcode_M503() {
lcd_quick_feedback ( ) ;
next_tick = ms + 2500 ; // feedback every 2.5s while waiting
}
manage_heater ( ) ;
manage_inactivity ( true ) ;
lcd_update ( ) ;
idle2 ( ) ;
# else
current_position [ E_AXIS ] + = AUTO_FILAMENT_CHANGE_LENGTH ;
destination [ E_AXIS ] = current_position [ E_AXIS ] ;
@ -5429,6 +5492,7 @@ inline void gcode_M503() {
st_synchronize ( ) ;
# endif
} // while(!lcd_clicked)
KEEPALIVE_STATE ( IN_HANDLER ) ;
lcd_quick_feedback ( ) ; // click sound feedback
# if ENABLED(AUTO_FILAMENT_CHANGE)
@ -5765,6 +5829,8 @@ void process_next_command() {
seen_pointer = current_command ;
codenum = code_value_short ( ) ;
KEEPALIVE_STATE ( IN_HANDLER ) ;
// Handle a known G, M, or T
switch ( command_code ) {
case ' G ' : switch ( codenum ) {
@ -6286,6 +6352,8 @@ void process_next_command() {
default : code_is_good = false ;
}
KEEPALIVE_STATE ( NOT_BUSY ) ;
ExitUnknownCommand :
// Still unknown command? Throw an error
@ -6975,6 +7043,7 @@ void disable_all_steppers() {
void idle ( ) {
manage_heater ( ) ;
manage_inactivity ( ) ;
host_keepalive ( ) ;
lcd_update ( ) ;
}
Scott Lahteine
9 years ago