Merge pull request #6057 from thinkyhead/rc_followup_6054

Followup 6054 with some cleanup
8 years ago · 7cabe81373
parent 4bca27ab89 143ab8f329
commit 7cabe81373
29 changed files with 279 additions and 8028 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -563,6 +563,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -593,10 +597,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -847,18 +847,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@ -563,6 +563,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -593,10 +597,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -847,18 +847,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@ -546,6 +546,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -576,10 +580,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@ -546,6 +546,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -576,10 +580,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -830,18 +830,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@ -555,6 +555,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -585,10 +589,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -839,18 +839,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@ -557,6 +557,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -587,10 +591,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -841,18 +841,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@ -592,6 +592,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -622,10 +626,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -876,18 +876,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/K8400/Configuration.h
+++ b/Marlin/example_configurations/K8400/Configuration.h
@ -563,6 +563,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -593,10 +597,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -847,18 +847,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
@ -563,6 +563,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -593,10 +597,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -847,18 +847,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@ -563,6 +563,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -593,10 +597,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -847,18 +847,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@ -562,6 +562,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -592,10 +596,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -846,18 +846,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/Roxys_printers/Folger_Tech_i3_2020/Configuration.h
+++ b/Marlin/example_configurations/Roxys_printers/Folger_Tech_i3_2020/Configuration.h
--- a/Marlin/example_configurations/Roxys_printers/Folger_Tech_i3_2020/Configuration_adv.h
+++ b/Marlin/example_configurations/Roxys_printers/Folger_Tech_i3_2020/Configuration_adv.h
--- a/Marlin/example_configurations/Roxys_printers/gMax_1.5+/Configuration.h
+++ b/Marlin/example_configurations/Roxys_printers/gMax_1.5+/Configuration.h
--- a/Marlin/example_configurations/Roxys_printers/gMax_1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/Roxys_printers/gMax_1.5+/Configuration_adv.h
--- a/Marlin/example_configurations/Roxys_printers/original_release_files/Configuration.h
+++ b/Marlin/example_configurations/Roxys_printers/original_release_files/Configuration.h
--- a/Marlin/example_configurations/Roxys_printers/original_release_files/Configuration_adv.h
+++ b/Marlin/example_configurations/Roxys_printers/original_release_files/Configuration_adv.h
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@ -578,6 +578,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -608,10 +612,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -862,18 +862,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@ -584,6 +584,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -614,10 +618,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -868,18 +868,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@ -555,6 +555,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -585,10 +589,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -839,18 +839,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@ -563,6 +563,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -593,10 +597,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -847,18 +847,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration.h
@ -621,6 +621,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -948,18 +952,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@ -608,6 +608,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -934,18 +938,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@ -608,6 +608,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -938,18 +942,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@ -602,6 +602,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -937,18 +941,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@ -621,6 +621,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -947,18 +951,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@ -566,6 +566,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -596,10 +600,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -850,18 +850,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@ -559,6 +559,10 @@
 //#define Z_PROBE_SLED
 //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.

+//
+// Allen Key Probe is defined in the Delta example configurations.
+//
+
 // Z Probe to nozzle (X,Y) offset, relative to (0, 0).
 // X and Y offsets must be integers.
 //
@ -589,10 +593,6 @@
 // Use double touch for probing
 //#define PROBE_DOUBLE_TOUCH

-//
-// Allen Key Probe is defined in the Delta example configurations.
-//
-
 // *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
 //
 // To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
@ -843,18 +843,18 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MANUAL_PROBE_Z_RANGE 4 // Z after Home, bed somewhere below but above 0.0.
+  #define MANUAL_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
  #define MESH_INSET 10          // Mesh inset margin on print area
  #define MESH_NUM_X_POINTS 3    // Don't use more than 7 points per axis, implementation limited.
  #define MESH_NUM_Y_POINTS 3

-  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest at origin [0,0,0]
+  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

  //#define MANUAL_BED_LEVELING  // Add display menu option for bed leveling.

  #if ENABLED(MANUAL_BED_LEVELING)
    #define MBL_Z_STEP 0.025     // Step size while manually probing Z axis.
-  #endif  // MANUAL_BED_LEVELING
+  #endif

 #elif ENABLED(AUTO_BED_LEVELING_UBL)

--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@ -339,7 +339,7 @@ uint16_t max_display_update_time = 0;
    if (_menuLineNr == _thisItemNr) { \
      if (_skipStatic && encoderLine <= _thisItemNr) { \
        encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \
-        lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; \
+        ++encoderLine; \
      } \
      if (lcdDrawUpdate) \
        lcd_implementation_drawmenu_static(_lcdLineNr, PSTR(LABEL), ## __VA_ARGS__); \
@ -2621,7 +2621,7 @@ KeepDrawing:
        lcd_implementation_hotend_status(_lcdLineNr); \
        if (_skipStatic && encoderLine <= _thisItemNr) { \
          encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \
-          lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; \
+          ++encoderLine; \
        } \
        else \
          lcdDrawUpdate = LCDVIEW_CALL_NO_REDRAW; \