//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -593,10 +597,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -593,10 +597,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -576,10 +580,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -576,10 +580,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -585,10 +589,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -587,10 +591,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -622,10 +626,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -593,10 +597,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -593,10 +597,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -593,10 +597,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -592,10 +596,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -608,10 +612,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -614,10 +618,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -585,10 +589,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -593,10 +597,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -596,10 +600,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
//
// Allen Key Probe is defined in the Delta example configurations.
//
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// Z Probe to nozzle (X,Y) offset, relative to (0, 0).
// X and Y offsets must be integers.
// X and Y offsets must be integers.
//
//
@ -589,10 +593,6 @@
// Use double touch for probing
// Use double touch for probing
//#define PROBE_DOUBLE_TOUCH
//#define PROBE_DOUBLE_TOUCH
//
// Allen Key Probe is defined in the Delta example configurations.
//
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
// *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
//
//
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.
// To continue using the Z-min-endstop for homing, be sure to disable Z_SAFE_HOMING.