microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Add spreadCycle parameter sets (#12645)

Browse Source
2.0.x
teemuatlut 6 years ago committed by Scott Lahteine
parent 902d5b0f8b
commit 7a5e637a37
63 changed files with 813 additions and 186 deletions
Show Stats Download Patch File Download Diff File

16
Marlin/Configuration_adv.h
Unescape Escape View File

@ -1389,10 +1389,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/default/Configuration_adv.h
Unescape Escape View File

@ -1389,10 +1389,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Anet/A2/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
Unescape Escape View File

@ -1387,10 +1387,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/ArmEd/Configuration_adv.h
Unescape Escape View File

@ -1362,10 +1362,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
Unescape Escape View File

@ -1387,10 +1387,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
Unescape Escape View File

@ -1396,10 +1396,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Cartesio/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Einstart-S/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Felix/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
Unescape Escape View File

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
Unescape Escape View File

@ -1393,10 +1393,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
Unescape Escape View File

@ -1393,10 +1393,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
Unescape Escape View File

@ -1389,10 +1389,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/MakerParts/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
Unescape Escape View File

@ -1396,10 +1396,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/RigidBot/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/SCARA/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/TheBorg/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h
Unescape Escape View File

@ -1389,10 +1389,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
Unescape Escape View File

@ -1401,10 +1401,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
Unescape Escape View File

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
Unescape Escape View File

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
Unescape Escape View File

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
Unescape Escape View File

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
Unescape Escape View File

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
Unescape Escape View File

@ -1363,10 +1363,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h
Unescape Escape View File

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h
Unescape Escape View File

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/generic/Configuration_adv.h
Unescape Escape View File

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
Unescape Escape View File

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
Unescape Escape View File

@ -1390,10 +1390,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/makibox/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
Unescape Escape View File

@ -1388,10 +1388,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

16
Marlin/src/config/examples/wt150/Configuration_adv.h
Unescape Escape View File

@ -1389,10 +1389,20 @@
#define STEALTHCHOP_E #define STEALTHCHOP_E
/** /**
* Adjust spreadCycle chopper parameters with the help of an example included in the library. * Optimize spreadCycle chopper parameters by using predefined parameter sets
* The parameters are off time, hysteresis end and hysteresis start. * or with the help of an example included in the library.
* Provided parameter sets are
* CHOPPER_DEFAULT_12V
* CHOPPER_DEFAULT_19V
* CHOPPER_DEFAULT_24V
* CHOPPER_DEFAULT_36V
* CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
* CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
*
* Define you own with
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/ */
#define CHOPPER_TIMING { 4, -2, 1 } #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/** /**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,

7
Marlin/src/feature/tmc_util.h
Unescape Escape View File

@ -43,6 +43,13 @@
#define TMC_E4_LABEL 'E', '4' #define TMC_E4_LABEL 'E', '4'
#define TMC_E5_LABEL 'E', '5' #define TMC_E5_LABEL 'E', '5'
#define CHOPPER_DEFAULT_12V { 3, -1, 1 }
#define CHOPPER_DEFAULT_19V { 4, 1, 1 }
#define CHOPPER_DEFAULT_24V { 4, 2, 1 }
#define CHOPPER_DEFAULT_36V { 5, 2, 4 }
#define CHOPPER_PRUSAMK3_24V { 4, 1, 4 }
#define CHOPPER_MARLIN_119 { 5, 2, 3 }
template<char AXIS_LETTER, char DRIVER_ID> template<char AXIS_LETTER, char DRIVER_ID>
class TMCStorage { class TMCStorage {
protected: protected:

Write Preview
Loading…
Cancel
Save