Overlord configs. Fix buzzer, redundant temp. (#14833)

Marlin/src/Marlin.cpp

@@ -688,7 +688,7 @@ void idle(
     print_job_timer.tick();
   #endif
 
-  #if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER)
+  #if HAS_BUZZER && DISABLED(LCD_USE_I2C_BUZZER) && DISABLED(PCA9632_BUZZER)
     buzzer.tick();
   #endif
 

Marlin/src/libs/buzzer.h

@@ -27,6 +27,11 @@
 
   #define BUZZ(d,f) ui.buzz(d,f)
 
+#elif ENABLED(PCA9632_BUZZER)
+
+  #include "../feature/leds/pca9632.h"
+  #define BUZZ(d, f) pca9632_buzz(d,f)
+
 #elif PIN_EXISTS(BEEPER)
 
   #include "circularqueue.h"

Marlin/src/module/temperature.cpp

@@ -2220,6 +2220,9 @@ void Temperature::readings_ready() {
   #endif
 
   HOTEND_LOOP() temp_hotend[e].acc = 0;
+  #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
+    temp_hotend[1].acc = 0;
+  #endif
 
   #if HAS_HEATED_BED
     temp_bed.acc = 0;

Marlin/src/module/temperature.h

@@ -268,7 +268,11 @@ class Temperature {
 
     static volatile bool in_temp_isr;
 
-    static hotend_info_t temp_hotend[HOTENDS];
+    static hotend_info_t temp_hotend[HOTENDS
+      #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
+        + 1
+      #endif
+    ];
 
     #if HAS_HEATED_BED
       static bed_info_t temp_bed;

config/examples/delta/Dreammaker/Overlord/_Bootscreen.h

@@ -0,0 +1,35 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#define CUSTOM_BOOTSCREEN_BMPWIDTH 80
+
+const uint8_t custom_start_bmp[] PROGMEM = {
+  B00000011,B10000011,B00001101,B11111101,B11111000,B11000000,B00011100,B00011111,B10001111,B11000000,
+  B00011111,B11100011,B00001101,B11111101,B11111110,B11000000,B11111111,B00011111,B11001111,B11110000,
+  B00011100,B01100011,B00001101,B10000001,B10001110,B11000000,B11100011,B00011001,B11001100,B01110000,
+  B00011100,B01110011,B00001101,B10000001,B10001110,B11000000,B11100011,B10011000,B11001100,B00111000,
+  B00011000,B01110001,B10011001,B11111001,B10001110,B11000000,B11000011,B10011001,B11001100,B00011000,
+  B00011000,B01110001,B10011001,B11111001,B11111100,B11000000,B11000011,B10011111,B11001100,B00011000,
+  B00011000,B01110001,B11111001,B10000001,B11111000,B11000000,B11000011,B10011111,B10001100,B00111000,
+  B00011111,B11100000,B11110001,B11111101,B10001100,B11111100,B11111111,B00011001,B11001111,B11110000,
+  B00001111,B11000000,B11110001,B11111101,B10001100,B11111100,B01111110,B00011001,B11001111,B11100000,
+  B00000011,B10000000,B01100001,B11111101,B10001110,B11111100,B00011100,B00011000,B11001111,B11000000
+};

config/examples/delta/Dreammaker/Overlord_Pro/_Bootscreen.h

@@ -0,0 +1,35 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#define CUSTOM_BOOTSCREEN_BMPWIDTH 80
+
+const uint8_t custom_start_bmp[] PROGMEM = {
+  B00000011,B10000011,B00001101,B11111101,B11111000,B11000000,B00011100,B00011111,B10001111,B11000000,
+  B00011111,B11100011,B00001101,B11111101,B11111110,B11000000,B11111111,B00011111,B11001111,B11110000,
+  B00011100,B01100011,B00001101,B10000001,B10001110,B11000000,B11100011,B00011001,B11001100,B01110000,
+  B00011100,B01110011,B00001101,B10000001,B10001110,B11000000,B11100011,B10011000,B11001100,B00111000,
+  B00011000,B01110001,B10011001,B11111001,B10001110,B11000000,B11000011,B10011001,B11001100,B00011000,
+  B00011000,B01110001,B10011001,B11111001,B11111100,B11000000,B11000011,B10011111,B11001100,B00011000,
+  B00011000,B01110001,B11111001,B10000001,B11111000,B11000000,B11000011,B10011111,B10001100,B00111000,
+  B00011111,B11100000,B11110001,B11111101,B10001100,B11111100,B11111111,B00011001,B11001111,B11110000,
+  B00001111,B11000000,B11110001,B11111101,B10001100,B11111100,B01111110,B00011001,B11001111,B11100000,
+  B00000011,B10000000,B01100001,B11111101,B10001110,B11111100,B00011100,B00011000,B11001111,B11000000
+};