microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Tweaks to temperature code

Browse Source
2.0.x
Scott Lahteine 8 years ago
parent d9da126776
commit 7769a22064
3 changed files with 22 additions and 22 deletions
Show Stats Download Patch File Download Diff File

24
Marlin/temperature.cpp
Unescape Escape View File

@ -421,13 +421,13 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS],
bedKp = workKp; \ bedKp = workKp; \
bedKi = scalePID_i(workKi); \ bedKi = scalePID_i(workKi); \
bedKd = scalePID_d(workKd); \ bedKd = scalePID_d(workKd); \
updatePID(); } while(0) updatePID(); }while(0)
#define _SET_EXTRUDER_PID() do { \ #define _SET_EXTRUDER_PID() do { \
PID_PARAM(Kp, hotend) = workKp; \ PID_PARAM(Kp, hotend) = workKp; \
PID_PARAM(Ki, hotend) = scalePID_i(workKi); \ PID_PARAM(Ki, hotend) = scalePID_i(workKi); \
PID_PARAM(Kd, hotend) = scalePID_d(workKd); \ PID_PARAM(Kd, hotend) = scalePID_d(workKd); \
updatePID(); } while(0) updatePID(); }while(0)
// Use the result? (As with "M303 U1") // Use the result? (As with "M303 U1")
if (set_result) { if (set_result) {
@ -505,7 +505,7 @@ int Temperature::getHeaterPower(int heater) {
// //
// Temperature Error Handlers // Temperature Error Handlers
// //
void Temperature::_temp_error(int e, const char* serial_msg, const char* lcd_msg) { void Temperature::_temp_error(const int8_t e, const char * const serial_msg, const char * const lcd_msg) {
static bool killed = false; static bool killed = false;
if (IsRunning()) { if (IsRunning()) {
SERIAL_ERROR_START(); SERIAL_ERROR_START();
@ -524,7 +524,7 @@ void Temperature::_temp_error(int e, const char* serial_msg, const char* lcd_msg
#endif #endif
} }
void Temperature::max_temp_error(int8_t e) { void Temperature::max_temp_error(const int8_t e) {
#if HAS_TEMP_BED #if HAS_TEMP_BED
_temp_error(e, PSTR(MSG_T_MAXTEMP), e >= 0 ? PSTR(MSG_ERR_MAXTEMP) : PSTR(MSG_ERR_MAXTEMP_BED)); _temp_error(e, PSTR(MSG_T_MAXTEMP), e >= 0 ? PSTR(MSG_ERR_MAXTEMP) : PSTR(MSG_ERR_MAXTEMP_BED));
#else #else
@ -534,7 +534,7 @@ void Temperature::max_temp_error(int8_t e) {
#endif #endif
#endif #endif
} }
void Temperature::min_temp_error(int8_t e) { void Temperature::min_temp_error(const int8_t e) {
#if HAS_TEMP_BED #if HAS_TEMP_BED
_temp_error(e, PSTR(MSG_T_MINTEMP), e >= 0 ? PSTR(MSG_ERR_MINTEMP) : PSTR(MSG_ERR_MINTEMP_BED)); _temp_error(e, PSTR(MSG_T_MINTEMP), e >= 0 ? PSTR(MSG_ERR_MINTEMP) : PSTR(MSG_ERR_MINTEMP_BED));
#else #else
@ -545,7 +545,7 @@ void Temperature::min_temp_error(int8_t e) {
#endif #endif
} }
float Temperature::get_pid_output(int e) { float Temperature::get_pid_output(const int8_t e) {
#if HOTENDS == 1 #if HOTENDS == 1
UNUSED(e); UNUSED(e);
#define _HOTEND_TEST true #define _HOTEND_TEST true
@ -890,7 +890,7 @@ float Temperature::analog2temp(int raw, uint8_t e) {
// Derived from RepRap FiveD extruder::getTemperature() // Derived from RepRap FiveD extruder::getTemperature()
// For bed temperature measurement. // For bed temperature measurement.
float Temperature::analog2tempBed(int raw) { float Temperature::analog2tempBed(const int raw) {
#if ENABLED(BED_USES_THERMISTOR) #if ENABLED(BED_USES_THERMISTOR)
float celsius = 0; float celsius = 0;
byte i; byte i;
@ -1148,7 +1148,7 @@ void Temperature::init() {
#define TEMP_MIN_ROUTINE(NR) \ #define TEMP_MIN_ROUTINE(NR) \
minttemp[NR] = HEATER_ ##NR## _MINTEMP; \ minttemp[NR] = HEATER_ ##NR## _MINTEMP; \
while(analog2temp(minttemp_raw[NR], NR) < HEATER_ ##NR## _MINTEMP) { \ while (analog2temp(minttemp_raw[NR], NR) < HEATER_ ##NR## _MINTEMP) { \
if (HEATER_ ##NR## _RAW_LO_TEMP < HEATER_ ##NR## _RAW_HI_TEMP) \ if (HEATER_ ##NR## _RAW_LO_TEMP < HEATER_ ##NR## _RAW_HI_TEMP) \
minttemp_raw[NR] += OVERSAMPLENR; \ minttemp_raw[NR] += OVERSAMPLENR; \
else \ else \
@ -1156,7 +1156,7 @@ void Temperature::init() {
} }
#define TEMP_MAX_ROUTINE(NR) \ #define TEMP_MAX_ROUTINE(NR) \
maxttemp[NR] = HEATER_ ##NR## _MAXTEMP; \ maxttemp[NR] = HEATER_ ##NR## _MAXTEMP; \
while(analog2temp(maxttemp_raw[NR], NR) > HEATER_ ##NR## _MAXTEMP) { \ while (analog2temp(maxttemp_raw[NR], NR) > HEATER_ ##NR## _MAXTEMP) { \
if (HEATER_ ##NR## _RAW_LO_TEMP < HEATER_ ##NR## _RAW_HI_TEMP) \ if (HEATER_ ##NR## _RAW_LO_TEMP < HEATER_ ##NR## _RAW_HI_TEMP) \
maxttemp_raw[NR] -= OVERSAMPLENR; \ maxttemp_raw[NR] -= OVERSAMPLENR; \
else \ else \
@ -1203,7 +1203,7 @@ void Temperature::init() {
#endif // HOTENDS > 1 #endif // HOTENDS > 1
#ifdef BED_MINTEMP #ifdef BED_MINTEMP
while(analog2tempBed(bed_minttemp_raw) < BED_MINTEMP) { while (analog2tempBed(bed_minttemp_raw) < BED_MINTEMP) {
#if HEATER_BED_RAW_LO_TEMP < HEATER_BED_RAW_HI_TEMP #if HEATER_BED_RAW_LO_TEMP < HEATER_BED_RAW_HI_TEMP
bed_minttemp_raw += OVERSAMPLENR; bed_minttemp_raw += OVERSAMPLENR;
#else #else
@ -1292,7 +1292,7 @@ void Temperature::init() {
SERIAL_EOL(); SERIAL_EOL();
*/ */
int heater_index = heater_id >= 0 ? heater_id : HOTENDS; const int heater_index = heater_id >= 0 ? heater_id : HOTENDS;
#if HEATER_IDLE_HANDLER #if HEATER_IDLE_HANDLER
// If the heater idle timeout expires, restart // If the heater idle timeout expires, restart
@ -1922,7 +1922,7 @@ void Temperature::isr() {
case SensorsReady: { case SensorsReady: {
// All sensors have been read. Stay in this state for a few // All sensors have been read. Stay in this state for a few
// ISRs to save on calls to temp update/checking code below. // ISRs to save on calls to temp update/checking code below.
constexpr int extra_loops = MIN_ADC_ISR_LOOPS - (int)SensorsReady; constexpr int8_t extra_loops = MIN_ADC_ISR_LOOPS - (int8_t)SensorsReady;
static uint8_t delay_count = 0; static uint8_t delay_count = 0;
if (extra_loops > 0) { if (extra_loops > 0) {
if (delay_count == 0) delay_count = extra_loops; // Init this delay if (delay_count == 0) delay_count = extra_loops; // Init this delay

8
Marlin/temperature.h
Unescape Escape View File

@ -535,15 +535,15 @@ class Temperature {
static void checkExtruderAutoFans(); static void checkExtruderAutoFans();
static float get_pid_output(int e); static float get_pid_output(const int8_t e);
#if ENABLED(PIDTEMPBED) #if ENABLED(PIDTEMPBED)
static float get_pid_output_bed(); static float get_pid_output_bed();
#endif #endif
static void _temp_error(int e, const char* serial_msg, const char* lcd_msg); static void _temp_error(const int8_t e, const char * const serial_msg, const char * const lcd_msg);
static void min_temp_error(int8_t e); static void min_temp_error(const int8_t e);
static void max_temp_error(int8_t e); static void max_temp_error(const int8_t e);
#if ENABLED(THERMAL_PROTECTION_HOTENDS) || HAS_THERMALLY_PROTECTED_BED #if ENABLED(THERMAL_PROTECTION_HOTENDS) || HAS_THERMALLY_PROTECTED_BED

12
Marlin/thermistortable_20.h
Unescape Escape View File

@ -23,27 +23,27 @@
// PT100 with INA826 amp on Ultimaker v2.0 electronics // PT100 with INA826 amp on Ultimaker v2.0 electronics
// The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature. // The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
// This does not match the normal thermistor behaviour so we need to set the following defines // This does not match the normal thermistor behaviour so we need to set the following defines
#if (THERMISTORHEATER_0 == 20) #if THERMISTORHEATER_0 == 20
#define HEATER_0_RAW_HI_TEMP 16383 #define HEATER_0_RAW_HI_TEMP 16383
#define HEATER_0_RAW_LO_TEMP 0 #define HEATER_0_RAW_LO_TEMP 0
#endif #endif
#if (THERMISTORHEATER_1 == 20) #if THERMISTORHEATER_1 == 20
#define HEATER_1_RAW_HI_TEMP 16383 #define HEATER_1_RAW_HI_TEMP 16383
#define HEATER_1_RAW_LO_TEMP 0 #define HEATER_1_RAW_LO_TEMP 0
#endif #endif
#if (THERMISTORHEATER_2 == 20) #if THERMISTORHEATER_2 == 20
#define HEATER_2_RAW_HI_TEMP 16383 #define HEATER_2_RAW_HI_TEMP 16383
#define HEATER_2_RAW_LO_TEMP 0 #define HEATER_2_RAW_LO_TEMP 0
#endif #endif
#if (THERMISTORHEATER_3 == 20) #if THERMISTORHEATER_3 == 20
#define HEATER_3_RAW_HI_TEMP 16383 #define HEATER_3_RAW_HI_TEMP 16383
#define HEATER_3_RAW_LO_TEMP 0 #define HEATER_3_RAW_LO_TEMP 0
#endif #endif
#if (THERMISTORHEATER_4 == 20) #if THERMISTORHEATER_4 == 20
#define HEATER_4_RAW_HI_TEMP 16383 #define HEATER_4_RAW_HI_TEMP 16383
#define HEATER_4_RAW_LO_TEMP 0 #define HEATER_4_RAW_LO_TEMP 0
#endif #endif
#if (THERMISTORBED == 20) #if THERMISTORBED == 20
#define HEATER_BED_RAW_HI_TEMP 16383 #define HEATER_BED_RAW_HI_TEMP 16383
#define HEATER_BED_RAW_LO_TEMP 0 #define HEATER_BED_RAW_LO_TEMP 0
#endif #endif

Write Preview
Loading…
Cancel
Save