microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Support for Tronxy X5S 2e (#13297)

Browse Source
2.0.x
Anthony Rich 6 years ago committed by Scott Lahteine
parent 599cdc3f0f
commit 7640b328df
6 changed files with 4658 additions and 1 deletions
Show Stats Download Patch File Download Diff File

2
Marlin/Makefile
Unescape Escape View File

@ -235,6 +235,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),541)
else ifeq ($(HARDWARE_MOTHERBOARD),31) else ifeq ($(HARDWARE_MOTHERBOARD),31)
# VORON # VORON
else ifeq ($(HARDWARE_MOTHERBOARD),441) else ifeq ($(HARDWARE_MOTHERBOARD),441)
# TRONXY V3 1.0
else ifeq ($(HARDWARE_MOTHERBOARD),442)
# #
# Other ATmega1280, ATmega2560 # Other ATmega1280, ATmega2560

2113
Marlin/src/config/examples/Tronxy/X5S-2E/Configuration.h
View File

File diff suppressed because it is too large Load Diff

2261
Marlin/src/config/examples/Tronxy/X5S-2E/Configuration_adv.h
View File

File diff suppressed because it is too large Load Diff

1
Marlin/src/core/boards.h
Unescape Escape View File

@ -89,6 +89,7 @@
#define BOARD_FYSETC_F6_13 541 // Fysetc F6 #define BOARD_FYSETC_F6_13 541 // Fysetc F6
#define BOARD_DUPLICATOR_I3_PLUS 31 // Wanhao Duplicator i3 Plus #define BOARD_DUPLICATOR_I3_PLUS 31 // Wanhao Duplicator i3 Plus
#define BOARD_VORON 441 // VORON Design #define BOARD_VORON 441 // VORON Design
#define BOARD_TRONXY_V3_1_0 442 // Tronxy TRONXY-V3-1.0
// //
// Other ATmega1280, ATmega2560 // Other ATmega1280, ATmega2560

4
Marlin/src/pins/pins.h
Unescape Escape View File

@ -163,9 +163,11 @@
#elif MB(FYSETC_F6_13) #elif MB(FYSETC_F6_13)
#include "pins_FYSETC_F6_13.h" // ATmega2560 env:megaatmega2560 #include "pins_FYSETC_F6_13.h" // ATmega2560 env:megaatmega2560
#elif MB(DUPLICATOR_I3_PLUS) #elif MB(DUPLICATOR_I3_PLUS)
#include "pins_DUPLICATOR_I3_PLUS.h" // ATmega2560 env:megaatmega2560 #include "pins_DUPLICATOR_I3_PLUS.h" // ATmega2560 env:megaatmega2560
#elif MB(VORON) #elif MB(VORON)
#include "pins_VORON.h" // ATmega2560 env:megaatmega2560 #include "pins_VORON.h" // ATmega2560 env:megaatmega2560
#elif MB(TRONXY_V3_1_0)
#include "pins_TRONXY_V3_1_0.h" // ATmega2560 env:megaatmega2560
// //
// Other ATmega1280, ATmega2560 // Other ATmega1280, ATmega2560

278
Marlin/src/pins/pins_TRONXY_V3_1_0.h
Unescape Escape View File

@ -0,0 +1,278 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Arduino Mega for Tronxy X5S-2E, etc.
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#if HOTENDS > 2 || E_STEPPERS > 2
#error "TRONXY-V3-1.0 supports only 2 hotends/E-steppers. Comment out this line to continue."
#endif
#define BOARD_NAME "TRONXY-V3-1.0"
#include "pins_RAMPS.h"
//
// Servos
//
#undef SERVO1_PIN
#define SERVO1_PIN 12 // 2560 PIN 25/PB6
/**
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
*
* ===== AUX-1 connector =====
*
* 2 4 6 8
* #----------------#
* #2 | ° ° ° ° |
* #1 | ° ° ° ° |
* NOTCH #------ ------#
* 1 3 5 7
*
* ###################################
* # Pin | ATMEGA2560 Pin | Arduino #
* ###################################
* # 1 | VCC | + #
* # 2 | VCC | + #
* # 3 | GND | - #
* # 4 | GND | - #
* # 5 | N/C | #
* # 6 | 3 / PE1 (TXD0) | D1 #
* # 7 | N/C | #
* # 8 | 2 / PE0 (RXD0) | D0 #
* ###################################
*
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
*
* ===== Limit Switch connectors =====
*
* ############## X+ #################
* X+ # Pin | ATMEGA2560 Pin | Arduino #
* 1 2 3 ###################################
* #- --- -# # 1 | 6 / PE4 (INT4) | D2 #
* | ° ° ° | # 2 | GND | - #
* #-------# # 3 | VCC | + #
* ###################################
*
* ############## X- #################
* X- # Pin | ATMEGA2560 Pin | Arduino #
* 1 2 3 ###################################
* #- --- -# # 1 | 7 / PE5 (INT5) | D3 #
* | ° ° ° | # 2 | GND | - #
* #-------# # 3 | VCC | + #
* ###################################
*
* ############## Y+ #################
* Y+ # Pin | ATMEGA2560 Pin | Arduino #
* 1 2 3 ###################################
* #- --- -# # 1 | 63/PJ0 (PCINT9) | D15 #
* | ° ° ° | # 2 | GND | - #
* #-------# # 3 | VCC | + #
* ###################################
*
* ############## Y- #################
* Y- # Pin | ATMEGA2560 Pin | Arduino #
* 1 2 3 ###################################
* #- --- -# # 1 | 64/PJ1 (PCINT10)| D14 #
* | ° ° ° | # 2 | GND | - #
* #-------# # 3 | VCC | + #
* ###################################
*
* ############## Z+ #################
* Z+ # Pin | ATMEGA2560 Pin | Arduino #
* 1 2 3 ###################################
* #- --- -# # 1 | 45 / PD2 (INT2) | D19 #
* | ° ° ° | # 2 | GND | - #
* #-------# # 3 | VCC | + #
* ###################################
*
* ############## Z- #################
* Z- # Pin | ATMEGA2560 Pin | Arduino #
* 1 2 3 ###################################
* #- --- -# # 1 | 46 / PD3 (INT3) | D18 #
* | ° ° ° | # 2 | GND | - #
* #-------# # 3 | VCC | + #
* ###################################
*
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
*
* ===== EXP1/EXP2 connectors =====
*
* (NOTE ORDER) EXP2 EXP1
* 2 4 6 8 10 2 4 6 8 10
* #-------------------# #-------------------#
* #2 | ° ° ° ° ° | #2 | ° ° ° ° ° |
* #1 | ° ° ° ° ° | #1 | ° ° ° ° ° |
* NOTCH #-------- -------# NOTCH #-------- -------#
* 1 3 5 7 9 1 3 5 7 9
*
* ############# EXP1 ################
* # Pin | ATMEGA2560 Pin | Arduino #
* ###################################
* # 1 | 53 / PC0 | D37 #
* # 2 | 55 / PC2 | D35 #
* # 3 | 12 / PH0 (RXD2) | D17 #
* # 4 | 13 / PH1 (TXD2) | D16 #
* # 5 | 77 / PA1 | D23 #
* # 6 | 75 / PA3 | D25 #
* # 7 | 73 / PA5 | D27 #
* # 8 | 71 / PA7 | D29 #
* # 9 | GND | - #
* # 10 | VCC | + #
* ###################################
*
* ############# EXP2 ################
* # Pin | ATMEGA2560 Pin | Arduino #
* ###################################
* # 1 | 22 / PB3 (MISO) | D50 #
* # 2 | 20 / PB1 (SCK) | D52 #
* # 3 | 59 / PC6 | D31 #
* # 4 | N/C | #
* # 5 | 57 / PC4 | D33 #
* # 6 | 21 / PB2 (MOSI) | D51 #
* # 7 | N/C | #
* # 8 | 30 / !RESET | RESET #
* # 9 | GND | - #
* # 10 | 51 / PG0 | D41 #
* ###################################
*
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
*
* ===== ICSP connector =====
*
* 2 4 6
* #---------#
* | ° ° ° |
* | ° ° ° |
* #---------#
* 1 3 5
*
* ##################################
* # Pin | ATMEGA2560 Pin | Arduino #
* ##################################
* # 1 | 22 / PB3 (MISO)| 50 #
* # 2 | VCC | + #
* # 3 | 20 / PB1 (SCK) | 52 #
* # 4 | 21 / PB2 (MOSI)| 51 #
* # 5 | 30 / !RESET | RESET #
* # 6 | GND | - #
* ##################################
*
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
*
* ===== SERVOS connector =====
*
* 2 4 6
* #---------#
* | ° ° ° |
* | ° ° ° |
* #---------#
* 1 3 5
*
* ##################################
* # Pin | ATMEGA2560 Pin | Arduino #
* ##################################
* # 1 | 25 / PB6 (OC1B)| D12 #
* # 2 | 24 / PB5 (OC1A)| D11 #
* # 3 | GND | - #
* # 4 | GND | - #
* # 5 | VCC | + #
* # 6 | VCC | + #
* ##################################
*
* NOTE: Pins 1 and 2 are the ones closest to the "L" and "PWR" LEDs.
*
* NOTE: Check servo wiring before connecting, for example:
* + Airtronics (non-Z) use: Red = +; Black = -; Black & White, White or Orange = signal.
* + Airtronics-Z use: Red = +; Black = -; Blue = signal.
* + Futaba use: Red = +; Black = -; White = signal.
* + Hitec use: Red = +; Black = -; Yellow = signal.
* + JR use: Red = +; Brown = -; Orange = signal.
*
* NOTE: Test your servo limits:
* Due to effects of component tolerances and/or age, the usable range of S-values for individual servos may be less than the settable 0-255 range. For example:
* 1. One servo may have a fully usable range of M280 P0 S0 through M280 P0 S255.
* 2. A different servo (of the same brand and model) may have a usable range of only M280 P0 S0 through M280 P0 S165 after which you experience binding.
*
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
*
* ===== Thermistor connectors =====
*
* (NOTE ORDER) TH2 TH1 TB
* 1 2 1 2 1 2
* #- -# #- -# #- -#
* | ° ° | | ° ° | | ° ° |
* #-----# #-----# #-----#
*
* ############## TB #################
* # Pin | ATMEGA2560 Pin | Arduino #
* ###################################
* # 1 | GND | - #
* # 2 | 83 / PK6 (ADC14)| A14 #
* ###################################
*
* ############## TH1 ################
* # Pin | ATMEGA2560 Pin | Arduino #
* ###################################
* # 1 | GND | - #
* # 2 | 84 / PK5 (ADC13)| A13 #
* ###################################
*
* ############## TH2 ################
* # Pin | ATMEGA2560 Pin | Arduino #
* ###################################
* # 1 | GND | - #
* # 2 | 82 / PK7 (ADC15)| A15 #
* ###################################
*
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
*
* ===== XS3 connector =====
*
* 2 4 6
* #---------#
* | ° ° ° |
* | ° ° ° |
* #---------#
* 1 3 5
*
* ##################################
* # Pin | ATMEGA2560 Pin | Arduino #
* ##################################
* # 1 | 85 / ADC12 | A12 #
* # 2 | 86 / ADC11 | A11 #
* # 3 | GND | - #
* # 4 | GND | - #
* # 5 | VCC | + #
* # 6 | VCC | + #
* ##################################
*
* NOTE: Pins 1 and 2 are the ones closest to the "L" and "PWR" LEDs.
*
* @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
*/
Write Preview
Loading…
Cancel
Save