better visibility of public/private/imported variables

Marlin/planner.cpp

@@ -65,7 +65,10 @@
 #include "temperature.h"
 #include "ultralcd.h"
 
-//public variables
+//===========================================================================
+//=============================public variables ============================
+//===========================================================================
+
 unsigned long minsegmenttime;
 float max_feedrate[4]; // set the max speeds
 float axis_steps_per_unit[4];
@@ -77,17 +80,23 @@ float max_xy_jerk; //speed than can be stopped at once, if i understand correctl
 float max_z_jerk;
 float mintravelfeedrate;
 unsigned long axis_steps_per_sqr_second[NUM_AXIS];
+
+// The current position of the tool in absolute steps
 long position[4];   //rescaled from extern when axis_steps_per_unit are changed by gcode
 
 
-//private variables
+//===========================================================================
+//=============================private variables ============================
+//===========================================================================
 static block_t block_buffer[BLOCK_BUFFER_SIZE];            // A ring buffer for motion instfructions
 static volatile unsigned char block_buffer_head;           // Index of the next block to be pushed
 static volatile unsigned char block_buffer_tail;           // Index of the block to process now
 
-// The current position of the tool in absolute steps
 
 
+//===========================================================================
+//=============================functions         ============================
+//===========================================================================
 #define ONE_MINUTE_OF_MICROSECONDS 60000000.0
 
 // Calculates the distance (not time) it takes to accelerate from initial_rate to target_rate using the 

Marlin/stepper.cpp

@@ -32,6 +32,38 @@
 
 #include "speed_lookuptable.h"
 
+
+//===========================================================================
+//=============================public variables  ============================
+//===========================================================================
+block_t *current_block;  // A pointer to the block currently being traced
+
+
+//===========================================================================
+//=============================private variables ============================
+//===========================================================================
+//static makes it inpossible to be called from outside of this file by extern.!
+
+// Variables used by The Stepper Driver Interrupt
+static unsigned char out_bits;        // The next stepping-bits to be output
+static long counter_x,       // Counter variables for the bresenham line tracer
+            counter_y, 
+            counter_z,       
+            counter_e;
+static unsigned long step_events_completed; // The number of step events executed in the current block
+#ifdef ADVANCE
+  static long advance_rate, advance, final_advance = 0;
+  static short old_advance = 0;
+  static short e_steps;
+#endif
+static unsigned char busy = false; // TRUE when SIG_OUTPUT_COMPARE1A is being serviced. Used to avoid retriggering that handler.
+static long acceleration_time, deceleration_time;
+//static unsigned long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate;
+static unsigned short acc_step_rate; // needed for deccelaration start point
+static char step_loops;
+
+
+
 // if DEBUG_STEPS is enabled, M114 can be used to compare two methods of determining the X,Y,Z position of the printer.
 // for debugging purposes only, should be disabled by default
 #ifdef DEBUG_STEPS
@@ -39,6 +71,10 @@
   volatile int count_direction[NUM_AXIS] = { 1, 1, 1, 1};
 #endif
 
+//===========================================================================
+//=============================functions         ============================
+//===========================================================================
+  
 
 // intRes = intIn1 * intIn2 >> 16
 // uses:
@@ -115,27 +151,9 @@ asm volatile ( \
 #define ENABLE_STEPPER_DRIVER_INTERRUPT()  TIMSK1 |= (1<<OCIE1A)
 #define DISABLE_STEPPER_DRIVER_INTERRUPT() TIMSK1 &= ~(1<<OCIE1A)
 
-block_t *current_block;  // A pointer to the block currently being traced
 
-//static makes it inpossible to be called from outside of this file by extern.!
 
-// Variables used by The Stepper Driver Interrupt
+
-static unsigned char out_bits;        // The next stepping-bits to be output
-static long counter_x,       // Counter variables for the bresenham line tracer
-            counter_y, 
-            counter_z,       
-            counter_e;
-static unsigned long step_events_completed; // The number of step events executed in the current block
-#ifdef ADVANCE
-  static long advance_rate, advance, final_advance = 0;
-  static short old_advance = 0;
-  static short e_steps;
-#endif
-static unsigned char busy = false; // TRUE when SIG_OUTPUT_COMPARE1A is being serviced. Used to avoid retriggering that handler.
-static long acceleration_time, deceleration_time;
-//static unsigned long accelerate_until, decelerate_after, acceleration_rate, initial_rate, final_rate, nominal_rate;
-static unsigned short acc_step_rate; // needed for deccelaration start point
-static char step_loops;
 
 
 //         __________________________

Marlin/temperature.cpp

@@ -38,10 +38,29 @@
 #include "temperature.h"
 #include "watchdog.h"
 
-
+//===========================================================================
+//=============================public variables============================
+//===========================================================================
 int target_raw[3] = {0, 0, 0};
 int current_raw[3] = {0, 0, 0};
 
+#ifdef PIDTEMP
+  
+  // probably used external
+  float HeaterPower;
+  float pid_setpoint = 0.0;
+
+  
+  float Kp=DEFAULT_Kp;
+  float Ki=DEFAULT_Ki;
+  float Kd=DEFAULT_Kd;
+  float Kc=DEFAULT_Kc;
+#endif //PIDTEMP
+  
+  
+//===========================================================================
+//=============================private variables============================
+//===========================================================================
 static bool temp_meas_ready = false;
 
 static unsigned long previous_millis_heater, previous_millis_bed_heater;
@@ -61,15 +80,6 @@ static unsigned long previous_millis_heater, previous_millis_bed_heater;
   static float pid_output;
   static bool pid_reset;
  
-  // probably used external
-  float HeaterPower;
-  float pid_setpoint = 0.0;
-
-  
-  float Kp=DEFAULT_Kp;
-  float Ki=DEFAULT_Ki;
-  float Kd=DEFAULT_Kd;
-  float Kc=DEFAULT_Kc;
 #endif //PIDTEMP
   
 #ifdef WATCHPERIOD
@@ -98,6 +108,10 @@ static unsigned long previous_millis_heater, previous_millis_bed_heater;
   static int bed_maxttemp = temp2analog(BED_MAXTEMP);
 #endif //BED_MAXTEMP
 
+//===========================================================================
+//=============================functions         ============================
+//===========================================================================
+  
 void manage_heater()
 {
   #ifdef USE_WATCHDOG
@@ -545,3 +559,4 @@ ISR(TIMER0_COMPB_vect)
   }
 }
 
+

Marlin/ultralcd.pde

@@ -1,6 +1,9 @@
 #include "ultralcd.h"
 #ifdef ULTRA_LCD
 
+//===========================================================================
+//=============================imported variables============================
+//===========================================================================
 
 extern volatile int feedmultiply;
 extern volatile bool feedmultiplychanged;
@@ -8,25 +11,43 @@ extern volatile bool feedmultiplychanged;
 extern long position[4];   
 extern CardReader card;
 
+//===========================================================================
+//=============================public variables============================
+//===========================================================================
+volatile char buttons=0;  //the last checked buttons in a bit array.
+int encoderpos=0;
+short lastenc=0;
+
+
+//===========================================================================
+//=============================private  variables============================
+//===========================================================================
 static char messagetext[LCD_WIDTH]="";
 
+//return for string conversion routines
+static char conv[8];
+
 #include <LiquidCrystal.h>
 LiquidCrystal lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7);  //RS,Enable,D4,D5,D6,D7 
 
 static unsigned long previous_millis_lcd=0;
 static long previous_millis_buttons=0;
 
-inline int intround(const float &x){return int(0.5+x);}
 
-volatile char buttons=0;  //the last checked buttons in a bit array.
-int encoderpos=0;
-short lastenc=0;
 #ifdef NEWPANEL
  static long blocking=0;
 #else
  static long blocking[8]={0,0,0,0,0,0,0,0};
 #endif
-MainMenu menu;
+ 
+static MainMenu menu;
+
+
+//===========================================================================
+//=============================functions         ============================
+//===========================================================================
+
+inline int intround(const float &x){return int(0.5+x);}
 
 void lcd_status(const char* message)
 {
@@ -1106,7 +1127,7 @@ void MainMenu::showControl()
   } 
 }
 
-#include "SdFat.h"
+
 
 
 
@@ -1437,8 +1458,7 @@ void MainMenu::update()
 
 
 
-//return for string conversion routines
+
-static char conv[8];
 
 //  convert float to string with +123.4 format
 char *ftostr3(const float &x)

Marlin/watchdog.pde

@@ -3,10 +3,37 @@
 #include  <avr/wdt.h>
 #include  <avr/interrupt.h>
 
+//===========================================================================
+//=============================private variables  ============================
+//===========================================================================
+
 static volatile uint8_t timeout_seconds=0;
 
 void(* ctrlaltdelete) (void) = 0; //does not work on my atmega2560
 
+//===========================================================================
+//=============================functinos         ============================
+//===========================================================================
+
+
+/// intialise watch dog with a 1 sec interrupt time
+void wd_init() 
+{
+  WDTCSR = (1<<WDCE )|(1<<WDE ); //allow changes
+  WDTCSR = (1<<WDIF)|(1<<WDIE)| (1<<WDCE )|(1<<WDE )|  (1<<WDP2 )|(1<<WDP1)|(0<<WDP0);
+}
+
+/// reset watchdog. MUST be called every 1s after init or avr will reset.
+void wd_reset() 
+{
+  wdt_reset();
+  timeout_seconds=0; //reset counter for resets
+}
+
+//===========================================================================
+//=============================ISR               ============================
+//===========================================================================
+
 //Watchdog timer interrupt, called if main program blocks >1sec
 ISR(WDT_vect) 
 { 
@@ -31,18 +58,4 @@ ISR(WDT_vect)
   }
 }
 
-/// intialise watch dog with a 1 sec interrupt time
-void wd_init() 
-{
-  WDTCSR = (1<<WDCE )|(1<<WDE ); //allow changes
-  WDTCSR = (1<<WDIF)|(1<<WDIE)| (1<<WDCE )|(1<<WDE )|  (1<<WDP2 )|(1<<WDP1)|(0<<WDP0);
-}
-
-/// reset watchdog. MUST be called every 1s after init or avr will reset.
-void wd_reset() 
-{
-  wdt_reset();
-  timeout_seconds=0; //reset counter for resets
-}
-
 #endif /* USE_WATCHDOG */