microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

[2.0.x] Update Italian language (#11996)

Browse Source
2.0.x
Giuliano Zaro 6 years ago committed by Scott Lahteine
parent bb561baf9e
commit 72a750e0eb
2 changed files with 30 additions and 23 deletions
Show Stats Download Patch File Download Diff File

3
Marlin/src/lcd/language/language_en.h
Unescape Escape View File

@ -648,9 +648,6 @@
#ifndef MSG_E6STEPS
#define MSG_E6STEPS _UxGT("E6steps/mm")
#endif
#ifndef MSG_E6STEPS
#define MSG_E6STEPS _UxGT("E6steps/mm")
#endif
#ifndef MSG_TEMPERATURE
#define MSG_TEMPERATURE _UxGT("Temperature")
#endif

50
Marlin/src/lcd/language/language_it.h
Unescape Escape View File

@ -36,7 +36,8 @@
#define MSG_BACK _UxGT("Indietro")
#define MSG_SD_INSERTED _UxGT("SD Card inserita")
#define MSG_SD_REMOVED _UxGT("SD Card rimossa")
#define MSG_LCD_ENDSTOPS _UxGT("Endstop")
#define MSG_LCD_ENDSTOPS _UxGT("Finecor.") // Max length 8 characters
#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Finecorsa Soft")
#define MSG_MAIN _UxGT("Menu principale")
#define MSG_ADVANCED_SETTINGS _UxGT("Impostaz. avanzate")
#define MSG_CONFIGURATION _UxGT("Configurazione")
@ -69,6 +70,7 @@
#define MSG_PREHEAT_2_END MSG_PREHEAT_2_N _UxGT("Ugello")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2_N _UxGT("Piatto")
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2_N _UxGT("conf")
#define MSG_PREHEAT_CUSTOM _UxGT("Prerisc.personaliz.")
#define MSG_COOLDOWN _UxGT("Raffredda")
#define MSG_SWITCH_PS_ON _UxGT("Accendi aliment.")
#define MSG_SWITCH_PS_OFF _UxGT("Spegni aliment.")
@ -80,8 +82,7 @@
#define MSG_LEVEL_CORNERS _UxGT("Livella spigoli")
#define MSG_NEXT_CORNER _UxGT("Prossimo spigolo")
#define MSG_EDITING_STOPPED _UxGT("Modif. Mesh Fermata")
#define MSG_USER_MENU _UxGT("Comandi Utente")
#define MSG_USER_MENU _UxGT("Comandi personaliz.")
#define MSG_UBL_DOING_G29 _UxGT("G29 in corso")
#define MSG_UBL_UNHOMED _UxGT("Home XYZ prima")
#define MSG_UBL_TOOLS _UxGT("Strumenti UBL")
@ -89,7 +90,12 @@
#define MSG_IDEX_MENU _UxGT("Modo IDEX")
#define MSG_IDEX_MODE_AUTOPARK _UxGT("Auto-Park")
#define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplicazione")
#define MSG_IDEX_MODE_SCALED_COPY _UxGT("Copia scalata")
#define MSG_IDEX_MODE_FULL_CTRL _UxGT("Pieno controllo")
#define MSG_IDEX_X_OFFSET _UxGT("2° ugello X")
#define MSG_IDEX_Y_OFFSET _UxGT("2° ugello Y")
#define MSG_IDEX_Z_OFFSET _UxGT("2° ugello Z")
#define MSG_IDEX_SAVE_OFFSETS _UxGT("Memorizza Offsets")
#define MSG_UBL_MANUAL_MESH _UxGT("Mesh Manuale")
#define MSG_UBL_BC_INSERT _UxGT("Metti spes. e misura")
#define MSG_UBL_BC_INSERT2 _UxGT("Misura")
@ -97,15 +103,15 @@
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Spostamento succes.")
#define MSG_UBL_ACTIVATE_MESH _UxGT("Attiva UBL")
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Disattiva UBL")
#define MSG_UBL_SET_BED_TEMP _UxGT("Temp Piatto")
#define MSG_UBL_SET_BED_TEMP _UxGT("Temp. Piatto")
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp Ugello")
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Temp. Ugello")
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_MESH_EDIT _UxGT("Modifica Mesh")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif Custom Mesh")
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Modif.Mesh personal.")
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Ritocca Mesh")
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Modif.Mesh fatta")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Crea Mesh Custom")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Crea Mesh personal.")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Crea Mesh")
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Crea Mesh PLA")
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Crea Mesh ABS")
@ -115,7 +121,7 @@
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valida Mesh")
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Valida Mesh PLA")
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Valida Mesh ABS")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valida Mesh Custom")
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valida Mesh pers.")
#define MSG_UBL_CONTINUE_MESH _UxGT("Continua Mesh")
#define MSG_UBL_MESH_LEVELING _UxGT("Livell. Mesh")
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Livell. 3 Punti")
@ -174,7 +180,7 @@
#define MSG_MOVE_Y _UxGT("Muovi Y")
#define MSG_MOVE_Z _UxGT("Muovi Z")
#define MSG_MOVE_E _UxGT("Estrusore")
#define MSG_MOVE_01MM _UxGT("Muovi di 0.1mm")
#define MSG_MOVE_01MM _UxGT("Muovi di 0,1mm")
#define MSG_MOVE_1MM _UxGT("Muovi di 1mm")
#define MSG_MOVE_10MM _UxGT("Muovi di 10mm")
#define MSG_SPEED _UxGT("Velocità")
@ -215,7 +221,7 @@
#define MSG_VTRAV_MIN _UxGT("VTrav min")
#define MSG_ACCELERATION _UxGT("Accelerazione")
#define MSG_AMAX _UxGT("Amax ")
#define MSG_A_RETRACT _UxGT("A-retract")
#define MSG_A_RETRACT _UxGT("A-Ritrazione")
#define MSG_A_TRAVEL _UxGT("A-Spostamento")
#define MSG_STEPS_PER_MM _UxGT("Passi/mm")
#if IS_KINEMATIC
@ -243,15 +249,15 @@
#define MSG_FILAMENT_LOAD _UxGT("Carica mm")
#define MSG_ADVANCE_K _UxGT("K Avanzamento")
#define MSG_CONTRAST _UxGT("Contrasto LCD")
#define MSG_STORE_EEPROM _UxGT("Salva in memoria")
#define MSG_LOAD_EEPROM _UxGT("Carica da memoria")
#define MSG_STORE_EEPROM _UxGT("Salva impostazioni")
#define MSG_LOAD_EEPROM _UxGT("Carica impostazioni")
#define MSG_RESTORE_FAILSAFE _UxGT("Ripristina imp.")
#define MSG_INIT_EEPROM _UxGT("Inizializza EEPROM")
#define MSG_REFRESH _UxGT("Aggiorna")
#define MSG_WATCH _UxGT("Schermata info")
#define MSG_PREPARE _UxGT("Prepara")
#define MSG_TUNE _UxGT("Regola")
#define MSG_PAUSE_PRINT _UxGT("Pausa")
#define MSG_PAUSE_PRINT _UxGT("Pausa stampa")
#define MSG_RESUME_PRINT _UxGT("Riprendi stampa")
#define MSG_STOP_PRINT _UxGT("Arresta stampa")
#define MSG_POWER_LOSS_RECOVERY _UxGT("Ripresa da PowerLoss")
@ -287,13 +293,15 @@
#define MSG_BLTOUCH_RESET _UxGT("Resetta BLTouch")
#define MSG_BLTOUCH_DEPLOY _UxGT("Estendi BLTouch")
#define MSG_BLTOUCH_STOW _UxGT("Ritrai BLTouch")
#define MSG_MANUAL_DEPLOY _UxGT("Estendi Sonda-Z")
#define MSG_MANUAL_STOW _UxGT("Ritrai Sonda-Z")
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("prima")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")
#define MSG_ZPROBE_ZOFFSET _UxGT("Offset sonda Z")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Finecorsa abort")
#define MSG_ENDSTOP_ABORT _UxGT("Finecorsa annullati")
#define MSG_HEATING_FAILED_LCD _UxGT("Riscald. Fallito")
#define MSG_HEATING_FAILED_LCD_BED _UxGT("Risc. piatto fallito")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: TEMP RIDONDANTE")
@ -321,7 +329,7 @@
#define MSG_DELTA_SETTINGS _UxGT("Impostaz. Delta")
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto calibrazione")
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Imp. altezza Delta")
#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Probe Z-offset")
#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Offset sonda-Z")
#define MSG_DELTA_DIAG_ROD _UxGT("Barra Diagonale")
#define MSG_DELTA_HEIGHT _UxGT("Altezza")
#define MSG_DELTA_RADIUS _UxGT("Raggio")
@ -363,15 +371,18 @@
#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CARICA FILAMENTO")
#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("RIMUOVI FILAMENTO")
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPZIONI RIPRESA:")
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Libera di piu")
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Spurga di più")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Riprendi stampa")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Ugello: ")
#define MSG_RUNOUT_SENSOR_ENABLE _UxGT("Sens.filo terminato")
#define MSG_ERR_HOMING_FAILED _UxGT("Home fallito")
#define MSG_ERR_PROBING_FAILED _UxGT("Probing fallito")
#define MSG_ERR_PROBING_FAILED _UxGT("Sondaggio fallito")
#define MSG_M600_TOO_COLD _UxGT("M600:Troppo freddo")
//
// Le schermate di Filament Change mostrano fino a 3 linee su un display a 4 righe
// ...o fino a 2 linee su un display a 3 righe.
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere avvio")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("del cambio")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("di filamento")
@ -395,7 +406,6 @@
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("la ripresa")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("della stampa")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attendere...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Espulsione...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserisci e premi")

Write Preview
Loading…
Cancel
Save