microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

merged https://github.com/MarlinFirmware/Marlin.git

Browse Source
2.0.x
AnHardt 10 years ago
parent b3ca430a20 b033783e0f
commit 6e6e3cf443
4 changed files with 84 additions and 86 deletions
Show Stats Download Patch File Download Diff File

156
Marlin/Marlin_main.cpp
Unescape Escape View File

@ -49,16 +49,16 @@
#include "math.h" #include "math.h"
#ifdef BLINKM #ifdef BLINKM
#include "BlinkM.h" #include "BlinkM.h"
#include "Wire.h" #include "Wire.h"
#endif #endif
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
#include "Servo.h" #include "Servo.h"
#endif #endif
#if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1 #if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
#include <SPI.h> #include <SPI.h>
#endif #endif
// look here for descriptions of G-codes: http://linuxcnc.org/handbook/gcode/g-code.html // look here for descriptions of G-codes: http://linuxcnc.org/handbook/gcode/g-code.html
@ -138,17 +138,17 @@
// M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec // M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec
// M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) in mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer under-runs and M20 minimum feedrate // M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) in mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer under-runs and M20 minimum feedrate
// M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk // M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk
// M206 - set additional homing offset // M206 - Set additional homing offset
// M207 - set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting // M207 - Set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting
// M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec] // M208 - Set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec]
// M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. // M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
// M218 - set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y> // M218 - Set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y>
// M220 S<factor in percent>- set speed factor override percentage // M220 S<factor in percent>- set speed factor override percentage
// M221 S<factor in percent>- set extrude factor override percentage // M221 S<factor in percent>- set extrude factor override percentage
// M226 P<pin number> S<pin state>- Wait until the specified pin reaches the state required // M226 P<pin number> S<pin state>- Wait until the specified pin reaches the state required
// M240 - Trigger a camera to take a photograph // M240 - Trigger a camera to take a photograph
// M250 - Set LCD contrast C<contrast value> (value 0..63) // M250 - Set LCD contrast C<contrast value> (value 0..63)
// M280 - set servo position absolute. P: servo index, S: angle or microseconds // M280 - Set servo position absolute. P: servo index, S: angle or microseconds
// M300 - Play beep sound S<frequency Hz> P<duration ms> // M300 - Play beep sound S<frequency Hz> P<duration ms>
// M301 - Set PID parameters P I and D // M301 - Set PID parameters P I and D
// M302 - Allow cold extrudes, or set the minimum extrude S<temperature>. // M302 - Allow cold extrudes, or set the minimum extrude S<temperature>.
@ -161,14 +161,14 @@
// M405 - Turn on Filament Sensor extrusion control. Optional D<delay in cm> to set delay in centimeters between sensor and extruder // M405 - Turn on Filament Sensor extrusion control. Optional D<delay in cm> to set delay in centimeters between sensor and extruder
// M406 - Turn off Filament Sensor extrusion control // M406 - Turn off Filament Sensor extrusion control
// M407 - Displays measured filament diameter // M407 - Displays measured filament diameter
// M500 - stores parameters in EEPROM // M500 - Store parameters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M501 - Read parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // M502 - Revert to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// M503 - print the current settings (from memory not from EEPROM). Use S0 to leave off headings. // M503 - Print the current settings (from memory not from EEPROM). Use S0 to leave off headings.
// M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) // M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
// M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] // M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
// M665 - set delta configurations // M665 - Set delta configurations
// M666 - set delta endstop adjustment // M666 - Set delta endstop adjustment
// M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ] // M605 - Set dual x-carriage movement mode: S<mode> [ X<duplication x-offset> R<duplication temp offset> ]
// M907 - Set digital trimpot motor current using axis codes. // M907 - Set digital trimpot motor current using axis codes.
// M908 - Control digital trimpot directly. // M908 - Control digital trimpot directly.
@ -187,25 +187,16 @@
// M928 - Start SD logging (M928 filename.g) - ended by M29 // M928 - Start SD logging (M928 filename.g) - ended by M29
// M999 - Restart after being stopped by error // M999 - Restart after being stopped by error
//Stepper Movement Variables
//===========================================================================
//=============================imported variables============================
//===========================================================================
//===========================================================================
//=============================public variables=============================
//===========================================================================
#ifdef SDSUPPORT #ifdef SDSUPPORT
CardReader card; CardReader card;
#endif #endif
float homing_feedrate[] = HOMING_FEEDRATE; float homing_feedrate[] = HOMING_FEEDRATE;
bool axis_relative_modes[] = AXIS_RELATIVE_MODES; bool axis_relative_modes[] = AXIS_RELATIVE_MODES;
int feedmultiply=100; //100->1 200->2 int feedmultiply = 100; //100->1 200->2
int saved_feedmultiply; int saved_feedmultiply;
int extrudemultiply=100; //100->1 200->2 int extrudemultiply = 100; //100->1 200->2
int extruder_multiply[EXTRUDERS] = {100 int extruder_multiply[EXTRUDERS] = { 100
#if EXTRUDERS > 1 #if EXTRUDERS > 1
, 100 , 100
#if EXTRUDERS > 2 #if EXTRUDERS > 2
@ -240,14 +231,14 @@ float volumetric_multiplier[EXTRUDERS] = {1.0
#endif #endif
}; };
float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 }; float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 };
float add_homing[3]={0,0,0}; float add_homing[3] = { 0, 0, 0 };
#ifdef DELTA #ifdef DELTA
float endstop_adj[3]={0,0,0}; float endstop_adj[3] = { 0, 0, 0 };
#endif #endif
float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS }; float min_pos[3] = { X_MIN_POS, Y_MIN_POS, Z_MIN_POS };
float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS }; float max_pos[3] = { X_MAX_POS, Y_MAX_POS, Z_MAX_POS };
bool axis_known_position[3] = {false, false, false}; bool axis_known_position[3] = { false, false, false };
float zprobe_zoffset; float zprobe_zoffset;
// Extruder offset // Extruder offset
@ -258,25 +249,36 @@ float zprobe_zoffset;
#define NUM_EXTRUDER_OFFSETS 3 // supports offsets in XYZ plane #define NUM_EXTRUDER_OFFSETS 3 // supports offsets in XYZ plane
#endif #endif
float extruder_offset[NUM_EXTRUDER_OFFSETS][EXTRUDERS] = { float extruder_offset[NUM_EXTRUDER_OFFSETS][EXTRUDERS] = {
#if defined(EXTRUDER_OFFSET_X) && defined(EXTRUDER_OFFSET_Y) #if defined(EXTRUDER_OFFSET_X)
EXTRUDER_OFFSET_X, EXTRUDER_OFFSET_Y EXTRUDER_OFFSET_X
#endif #else
0
#endif
#if defined(EXTRUDER_OFFSET_Y)
EXTRUDER_OFFSET_Y
#else
0
#endif
}; };
#endif #endif
uint8_t active_extruder = 0; uint8_t active_extruder = 0;
int fanSpeed=0; int fanSpeed = 0;
#ifdef SERVO_ENDSTOPS #ifdef SERVO_ENDSTOPS
int servo_endstops[] = SERVO_ENDSTOPS; int servo_endstops[] = SERVO_ENDSTOPS;
int servo_endstop_angles[] = SERVO_ENDSTOP_ANGLES; int servo_endstop_angles[] = SERVO_ENDSTOP_ANGLES;
#endif #endif
#ifdef BARICUDA #ifdef BARICUDA
int ValvePressure=0; int ValvePressure = 0;
int EtoPPressure=0; int EtoPPressure = 0;
#endif #endif
#ifdef FWRETRACT #ifdef FWRETRACT
bool autoretract_enabled=false;
bool retracted[EXTRUDERS]={false bool autoretract_enabled = false;
bool retracted[EXTRUDERS] = { false
#if EXTRUDERS > 1 #if EXTRUDERS > 1
, false , false
#if EXTRUDERS > 2 #if EXTRUDERS > 2
@ -287,7 +289,7 @@ int EtoPPressure=0;
#endif #endif
#endif #endif
}; };
bool retracted_swap[EXTRUDERS]={false bool retracted_swap[EXTRUDERS] = { false
#if EXTRUDERS > 1 #if EXTRUDERS > 1
, false , false
#if EXTRUDERS > 2 #if EXTRUDERS > 2
@ -306,38 +308,41 @@ int EtoPPressure=0;
float retract_recover_length = RETRACT_RECOVER_LENGTH; float retract_recover_length = RETRACT_RECOVER_LENGTH;
float retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP; float retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP;
float retract_recover_feedrate = RETRACT_RECOVER_FEEDRATE; float retract_recover_feedrate = RETRACT_RECOVER_FEEDRATE;
#endif // FWRETRACT #endif // FWRETRACT
#ifdef ULTIPANEL #ifdef ULTIPANEL
#ifdef PS_DEFAULT_OFF bool powersupply =
bool powersupply = false; #ifdef PS_DEFAULT_OFF
#else false
bool powersupply = true; #else
#endif true
#endif
;
#endif #endif
#ifdef DELTA #ifdef DELTA
float delta[3] = {0.0, 0.0, 0.0}; float delta[3] = { 0, 0, 0 };
#define SIN_60 0.8660254037844386 #define SIN_60 0.8660254037844386
#define COS_60 0.5 #define COS_60 0.5
// these are the default values, can be overriden with M665 // these are the default values, can be overriden with M665
float delta_radius= DELTA_RADIUS; float delta_radius = DELTA_RADIUS;
float delta_tower1_x= -SIN_60*delta_radius; // front left tower float delta_tower1_x = -SIN_60 * delta_radius; // front left tower
float delta_tower1_y= -COS_60*delta_radius; float delta_tower1_y = -COS_60 * delta_radius;
float delta_tower2_x= SIN_60*delta_radius; // front right tower float delta_tower2_x = SIN_60 * delta_radius; // front right tower
float delta_tower2_y= -COS_60*delta_radius; float delta_tower2_y = -COS_60 * delta_radius;
float delta_tower3_x= 0.0; // back middle tower float delta_tower3_x = 0; // back middle tower
float delta_tower3_y= delta_radius; float delta_tower3_y = delta_radius;
float delta_diagonal_rod= DELTA_DIAGONAL_ROD; float delta_diagonal_rod = DELTA_DIAGONAL_ROD;
float delta_diagonal_rod_2= sq(delta_diagonal_rod); float delta_diagonal_rod_2 = sq(delta_diagonal_rod);
float delta_segments_per_second= DELTA_SEGMENTS_PER_SECOND; float delta_segments_per_second = DELTA_SEGMENTS_PER_SECOND;
#endif #endif
#ifdef SCARA // Build size scaling #ifdef SCARA
float axis_scaling[3]={1,1,1}; // Build size scaling, default to 1 float axis_scaling[3] = { 1, 1, 1 }; // Build size scaling, default to 1
#endif #endif
bool cancel_heatup = false ; bool cancel_heatup = false;
#ifdef FILAMENT_SENSOR #ifdef FILAMENT_SENSOR
//Variables for Filament Sensor input //Variables for Filament Sensor input
@ -354,17 +359,14 @@ bool cancel_heatup = false ;
const char errormagic[] PROGMEM = "Error:"; const char errormagic[] PROGMEM = "Error:";
const char echomagic[] PROGMEM = "echo:"; const char echomagic[] PROGMEM = "echo:";
//===========================================================================
//=============================Private Variables=============================
//===========================================================================
const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'};
static float destination[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0}; static float destination[NUM_AXIS] = { 0, 0, 0, 0 };
#ifndef DELTA #ifndef DELTA
static float delta[3] = {0.0, 0.0, 0.0}; static float delta[3] = { 0, 0, 0 };
#endif #endif
static float offset[3] = {0.0, 0.0, 0.0}; static float offset[3] = { 0, 0, 0 };
static bool home_all_axis = true; static bool home_all_axis = true;
static float feedrate = 1500.0, next_feedrate, saved_feedrate; static float feedrate = 1500.0, next_feedrate, saved_feedrate;
static long gcode_N, gcode_LastN, Stopped_gcode_LastN = 0; static long gcode_N, gcode_LastN, Stopped_gcode_LastN = 0;
@ -376,29 +378,26 @@ static bool fromsd[BUFSIZE];
static int bufindr = 0; static int bufindr = 0;
static int bufindw = 0; static int bufindw = 0;
static int buflen = 0; static int buflen = 0;
//static int i = 0;
static char serial_char; static char serial_char;
static int serial_count = 0; static int serial_count = 0;
static boolean comment_mode = false; static boolean comment_mode = false;
static char *strchr_pointer; // just a pointer to find chars in the command string like X, Y, Z, E, etc static char *strchr_pointer; ///< A pointer to find chars in the command string (X, Y, Z, E, etc.)
const int sensitive_pins[] = SENSITIVE_PINS; // Sensitive pin list for M42
//static float tt = 0; const int sensitive_pins[] = SENSITIVE_PINS; ///< Sensitive pin list for M42
//static float bt = 0;
//Inactivity shutdown variables // Inactivity shutdown
static unsigned long previous_millis_cmd = 0; static unsigned long previous_millis_cmd = 0;
static unsigned long max_inactive_time = 0; static unsigned long max_inactive_time = 0;
static unsigned long stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000l; static unsigned long stepper_inactive_time = DEFAULT_STEPPER_DEACTIVE_TIME*1000l;
unsigned long starttime=0; unsigned long starttime = 0; ///< Print job start time
unsigned long stoptime=0; unsigned long stoptime = 0; ///< Print job stop time
static uint8_t tmp_extruder; static uint8_t tmp_extruder;
bool Stopped=false; bool Stopped = false;
#if NUM_SERVOS > 0 #if NUM_SERVOS > 0
Servo servos[NUM_SERVOS]; Servo servos[NUM_SERVOS];
@ -407,10 +406,9 @@ bool Stopped=false;
bool CooldownNoWait = true; bool CooldownNoWait = true;
bool target_direction; bool target_direction;
//Insert variables if CHDK is defined
#ifdef CHDK #ifdef CHDK
unsigned long chdkHigh = 0; unsigned long chdkHigh = 0;
boolean chdkActive = false; boolean chdkActive = false;
#endif #endif
//=========================================================================== //===========================================================================

2
Marlin/boards.h
Unescape Escape View File

@ -48,7 +48,7 @@
#define BOARD_ELEFU_3 21 // Elefu Ra Board (v3) #define BOARD_ELEFU_3 21 // Elefu Ra Board (v3)
#define BOARD_5DPRINT 88 // 5DPrint D8 Driver Board #define BOARD_5DPRINT 88 // 5DPrint D8 Driver Board
#define BOARD_LEAPFROG 999 // Leapfrog #define BOARD_LEAPFROG 999 // Leapfrog
#define BOARD_WITBOX 41 // bq WITBOX #define BOARD_WITBOX 41 // bq WITBOX
#define BOARD_99 99 // This is in pins.h but...? #define BOARD_99 99 // This is in pins.h but...?

2
Marlin/language.h
Unescape Escape View File

@ -164,7 +164,7 @@
// LCD Menu Messages // LCD Menu Messages
#define STR_Ae "Ae" // no charset we know now. Will be overruled when we know. #define STR_Ae "Ae" // No charset known now. Default will be overruled when we know.
#define STR_ae "ae" #define STR_ae "ae"
#define STR_Oe "Oe" #define STR_Oe "Oe"
#define STR_oe "oe" #define STR_oe "oe"

10
Marlin/ultralcd_implementation_hitachi_HD44780.h
Unescape Escape View File

@ -1,5 +1,5 @@
#ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H #ifndef ULTRALCD_IMPLEMENTATION_HITACHI_HD44780_H
#define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H #define ULTRALCD_IMPLEMENTATION_HITACHI_HD44780_H
/** /**
* Implementation of the LCD display routines for a Hitachi HD44780 display. These are common LCD character displays. * Implementation of the LCD display routines for a Hitachi HD44780 display. These are common LCD character displays.
@ -7,9 +7,9 @@
**/ **/
#ifndef REPRAPWORLD_KEYPAD #ifndef REPRAPWORLD_KEYPAD
extern volatile uint8_t buttons; //the last checked buttons in a bit array. extern volatile uint8_t buttons; //the last checked buttons in a bit array.
#else #else
extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array. extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array.
#endif #endif
//////////////////////////////////// ////////////////////////////////////
@ -903,4 +903,4 @@ static uint8_t lcd_implementation_read_slow_buttons()
} }
#endif #endif
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H #endif //__ULTRALCD_IMPLEMENTATION_HITACHI_HD44780_H

Write Preview
Loading…
Cancel
Save