microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Merge branch 'Development' into enhanced_g29

Browse Source 
Latest upstream changes
2.0.x
Scott Lahteine 10 years ago
parent 4db2179f5c 0e074d4050
commit 6d9e9a6bef
18 changed files with 207 additions and 234 deletions
Show Stats Download Patch File Download Diff File

4
Marlin/Marlin.h
Unescape Escape View File

@ -180,8 +180,8 @@ void manage_inactivity(bool ignore_stepper_queue=false);
#define disable_e3() /* nothing */ #define disable_e3() /* nothing */
#endif #endif
enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5}; enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5};
//X_HEAD and Y_HEAD is used for systems that don't have a 1:1 relationship between X_AXIS and X Head movement, like CoreXY bots.
void FlushSerialRequestResend(); void FlushSerialRequestResend();
void ClearToSend(); void ClearToSend();

103
Marlin/Marlin_main.cpp
Unescape Escape View File

@ -154,6 +154,8 @@
// M302 - Allow cold extrudes, or set the minimum extrude S<temperature>. // M302 - Allow cold extrudes, or set the minimum extrude S<temperature>.
// M303 - PID relay autotune S<temperature> sets the target temperature. (default target temperature = 150C) // M303 - PID relay autotune S<temperature> sets the target temperature. (default target temperature = 150C)
// M304 - Set bed PID parameters P I and D // M304 - Set bed PID parameters P I and D
// M380 - Activate solenoid on active extruder
// M381 - Disable all solenoids
// M400 - Finish all moves // M400 - Finish all moves
// M401 - Lower z-probe if present // M401 - Lower z-probe if present
// M402 - Raise z-probe if present // M402 - Raise z-probe if present
@ -529,32 +531,28 @@ void setup_homepin(void)
void setup_photpin() void setup_photpin()
{ {
#if defined(PHOTOGRAPH_PIN) && PHOTOGRAPH_PIN > -1 #if defined(PHOTOGRAPH_PIN) && PHOTOGRAPH_PIN > -1
SET_OUTPUT(PHOTOGRAPH_PIN); OUT_WRITE(PHOTOGRAPH_PIN, LOW);
WRITE(PHOTOGRAPH_PIN, LOW);
#endif #endif
} }
void setup_powerhold() void setup_powerhold()
{ {
#if defined(SUICIDE_PIN) && SUICIDE_PIN > -1 #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1
SET_OUTPUT(SUICIDE_PIN); OUT_WRITE(SUICIDE_PIN, HIGH);
WRITE(SUICIDE_PIN, HIGH);
#endif #endif
#if defined(PS_ON_PIN) && PS_ON_PIN > -1 #if defined(PS_ON_PIN) && PS_ON_PIN > -1
SET_OUTPUT(PS_ON_PIN); #if defined(PS_DEFAULT_OFF)
#if defined(PS_DEFAULT_OFF) OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP);
WRITE(PS_ON_PIN, PS_ON_ASLEEP); #else
#else OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE);
WRITE(PS_ON_PIN, PS_ON_AWAKE); #endif
#endif
#endif #endif
} }
void suicide() void suicide()
{ {
#if defined(SUICIDE_PIN) && SUICIDE_PIN > -1 #if defined(SUICIDE_PIN) && SUICIDE_PIN > -1
SET_OUTPUT(SUICIDE_PIN); OUT_WRITE(SUICIDE_PIN, LOW);
WRITE(SUICIDE_PIN, LOW);
#endif #endif
} }
@ -1437,10 +1435,10 @@ void process_commands()
if(autoretract_enabled) if(autoretract_enabled)
if( !(code_seen('X') || code_seen('Y') || code_seen('Z')) && code_seen('E')) { if( !(code_seen('X') || code_seen('Y') || code_seen('Z')) && code_seen('E')) {
float echange=destination[E_AXIS]-current_position[E_AXIS]; float echange=destination[E_AXIS]-current_position[E_AXIS];
if((echange<-MIN_RETRACT && !retracted) || (echange>MIN_RETRACT && retracted)) { //move appears to be an attempt to retract or recover if((echange<-MIN_RETRACT && !retracted[active_extruder]) || (echange>MIN_RETRACT && retracted[active_extruder])) { //move appears to be an attempt to retract or recover
current_position[E_AXIS] = destination[E_AXIS]; //hide the slicer-generated retract/recover from calculations current_position[E_AXIS] = destination[E_AXIS]; //hide the slicer-generated retract/recover from calculations
plan_set_e_position(current_position[E_AXIS]); //AND from the planner plan_set_e_position(current_position[E_AXIS]); //AND from the planner
retract(!retracted); retract(!retracted[active_extruder]);
return; return;
} }
} }
@ -2865,15 +2863,13 @@ Sigma_Exit:
#if defined(PS_ON_PIN) && PS_ON_PIN > -1 #if defined(PS_ON_PIN) && PS_ON_PIN > -1
case 80: // M80 - Turn on Power Supply case 80: // M80 - Turn on Power Supply
SET_OUTPUT(PS_ON_PIN); //GND OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE); // GND
WRITE(PS_ON_PIN, PS_ON_AWAKE);
// If you have a switch on suicide pin, this is useful // If you have a switch on suicide pin, this is useful
// if you want to start another print with suicide feature after // if you want to start another print with suicide feature after
// a print without suicide... // a print without suicide...
#if defined SUICIDE_PIN && SUICIDE_PIN > -1 #if defined SUICIDE_PIN && SUICIDE_PIN > -1
SET_OUTPUT(SUICIDE_PIN); OUT_WRITE(SUICIDE_PIN, HIGH);
WRITE(SUICIDE_PIN, HIGH);
#endif #endif
#ifdef ULTIPANEL #ifdef ULTIPANEL
@ -2898,8 +2894,7 @@ Sigma_Exit:
st_synchronize(); st_synchronize();
suicide(); suicide();
#elif defined(PS_ON_PIN) && PS_ON_PIN > -1 #elif defined(PS_ON_PIN) && PS_ON_PIN > -1
SET_OUTPUT(PS_ON_PIN); OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP);
WRITE(PS_ON_PIN, PS_ON_ASLEEP);
#endif #endif
#ifdef ULTIPANEL #ifdef ULTIPANEL
powersupply = false; powersupply = false;
@ -3263,7 +3258,7 @@ Sigma_Exit:
SERIAL_ECHO(extruder_offset[Z_AXIS][tmp_extruder]); SERIAL_ECHO(extruder_offset[Z_AXIS][tmp_extruder]);
#endif #endif
} }
SERIAL_ECHOLN(""); SERIAL_EOL;
}break; }break;
#endif #endif
case 220: // M220 S<factor in percent>- set speed factor override percentage case 220: // M220 S<factor in percent>- set speed factor override percentage
@ -3482,8 +3477,7 @@ Sigma_Exit:
{ {
#ifdef CHDK #ifdef CHDK
SET_OUTPUT(CHDK); OUT_WRITE(CHDK, HIGH);
WRITE(CHDK, HIGH);
chdkHigh = millis(); chdkHigh = millis();
chdkActive = true; chdkActive = true;
@ -3642,6 +3636,17 @@ Sigma_Exit:
} }
break; break;
#endif #endif
#ifdef EXT_SOLENOID
case 380:
enable_solenoid_on_active_extruder();
break;
case 381:
disable_all_solenoids();
break;
#endif //EXT_SOLENOID
case 400: // M400 finish all moves case 400: // M400 finish all moves
{ {
st_synchronize(); st_synchronize();
@ -3883,9 +3888,7 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
if(cnt==0) if(cnt==0)
{ {
#if BEEPER > 0 #if BEEPER > 0
SET_OUTPUT(BEEPER); OUT_WRITE(BEEPER,HIGH);
WRITE(BEEPER,HIGH);
delay(3); delay(3);
WRITE(BEEPER,LOW); WRITE(BEEPER,LOW);
delay(3); delay(3);
@ -4146,6 +4149,13 @@ case 404: //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
prepare_move(); prepare_move();
} }
} }
#ifdef EXT_SOLENOID
st_synchronize();
disable_all_solenoids();
enable_solenoid_on_active_extruder();
#endif //EXT_SOLENOID
#endif #endif
SERIAL_ECHO_START; SERIAL_ECHO_START;
SERIAL_ECHO(MSG_ACTIVE_EXTRUDER); SERIAL_ECHO(MSG_ACTIVE_EXTRUDER);
@ -4855,7 +4865,6 @@ bool setTargetedHotend(int code){
return false; return false;
} }
float calculate_volumetric_multiplier(float diameter) { float calculate_volumetric_multiplier(float diameter) {
if (!volumetric_enabled || diameter == 0) return 1.0; if (!volumetric_enabled || diameter == 0) return 1.0;
float d2 = diameter * 0.5; float d2 = diameter * 0.5;
@ -4866,3 +4875,43 @@ void calculate_volumetric_multipliers() {
for (int i=0; i<EXTRUDERS; i++) for (int i=0; i<EXTRUDERS; i++)
volumetric_multiplier[i] = calculate_volumetric_multiplier(filament_size[i]); volumetric_multiplier[i] = calculate_volumetric_multiplier(filament_size[i]);
} }
#ifdef EXT_SOLENOID
void enable_solenoid(uint8_t num) {
switch(num) {
case 0:
OUT_WRITE(SOL0_PIN, HIGH);
break;
#if defined(SOL1_PIN) && SOL1_PIN > -1
case 1:
OUT_WRITE(SOL1_PIN, HIGH);
break;
#endif
#if defined(SOL2_PIN) && SOL2_PIN > -1
case 2:
OUT_WRITE(SOL2_PIN, HIGH);
break;
#endif
#if defined(SOL3_PIN) && SOL3_PIN > -1
case 3:
OUT_WRITE(SOL3_PIN, HIGH);
break;
#endif
default:
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM(MSG_INVALID_SOLENOID);
break;
}
}
void enable_solenoid_on_active_extruder() { enable_solenoid(active_extruder); }
void disable_all_solenoids() {
OUT_WRITE(SOL0_PIN, LOW);
OUT_WRITE(SOL1_PIN, LOW);
OUT_WRITE(SOL2_PIN, LOW);
OUT_WRITE(SOL3_PIN, LOW);
}
#endif //EXT_SOLENOID

3
Marlin/cardreader.cpp
Unescape Escape View File

@ -22,8 +22,7 @@ CardReader::CardReader() {
autostart_index = 0; autostart_index = 0;
//power to SD reader //power to SD reader
#if SDPOWER > -1 #if SDPOWER > -1
SET_OUTPUT(SDPOWER); OUT_WRITE(SDPOWER, HIGH);
WRITE(SDPOWER, HIGH);
#endif //SDPOWER #endif //SDPOWER
autostart_atmillis = millis() + 5000; autostart_atmillis = millis() + 5000;

18
Marlin/dogm_lcd_implementation.h
Unescape Escape View File

@ -21,17 +21,13 @@
**/ **/
#ifdef ULTIPANEL #ifdef ULTIPANEL
#define BLEN_A 0 #define BLEN_A 0
#define BLEN_B 1 #define BLEN_B 1
#define BLEN_C 2 #define BLEN_C 2
#define EN_A (1<<BLEN_A) #define EN_A (1<<BLEN_A)
#define EN_B (1<<BLEN_B) #define EN_B (1<<BLEN_B)
#define EN_C (1<<BLEN_C) #define EN_C (1<<BLEN_C)
#define encrot0 0 #define LCD_CLICKED (buttons&EN_C)
#define encrot1 2
#define encrot2 3
#define encrot3 1
#define LCD_CLICKED (buttons&EN_C)
#endif #endif
#include <U8glib.h> #include <U8glib.h>

3
Marlin/fastio.h
Unescape Escape View File

@ -83,6 +83,9 @@
/// check if pin is an timer wrapper /// check if pin is an timer wrapper
#define GET_TIMER(IO) _GET_TIMER(IO) #define GET_TIMER(IO) _GET_TIMER(IO)
// Shorthand
#define OUT_WRITE(IO, v) { SET_OUTPUT(IO); WRITE(IO, v); }
/* /*
ports and functions ports and functions

1
Marlin/language.h
Unescape Escape View File

@ -121,6 +121,7 @@
#define MSG_UNKNOWN_COMMAND "Unknown command: \"" #define MSG_UNKNOWN_COMMAND "Unknown command: \""
#define MSG_ACTIVE_EXTRUDER "Active Extruder: " #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
#define MSG_INVALID_EXTRUDER "Invalid extruder" #define MSG_INVALID_EXTRUDER "Invalid extruder"
#define MSG_INVALID_SOLENOID "Invalid solenoid"
#define MSG_X_MIN "x_min: " #define MSG_X_MIN "x_min: "
#define MSG_X_MAX "x_max: " #define MSG_X_MAX "x_max: "
#define MSG_Y_MIN "y_min: " #define MSG_Y_MIN "y_min: "

6
Marlin/pins_CHEAPTRONIC.h
Unescape Escape View File

@ -87,9 +87,3 @@
// Cheaptronic v1.0 does not use this port // Cheaptronic v1.0 does not use this port
#define SDCARDDETECT -1 #define SDCARDDETECT -1
// Encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1

6
Marlin/pins_ELEFU_3.h
Unescape Escape View File

@ -74,12 +74,6 @@
#define BLEN_B 1 #define BLEN_B 1
#define BLEN_A 0 #define BLEN_A 0
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif // RA_CONTROL_PANEL #endif // RA_CONTROL_PANEL
#ifdef RA_DISCO #ifdef RA_DISCO

6
Marlin/pins_MEGATRONICS.h
Unescape Escape View File

@ -83,10 +83,4 @@
#define SDCARDDETECT -1 // Ramps does not use this port #define SDCARDDETECT -1 // Ramps does not use this port
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif // ULTRA_LCD && NEWPANEL #endif // ULTRA_LCD && NEWPANEL

6
Marlin/pins_MEGATRONICS_1.h
Unescape Escape View File

@ -80,9 +80,3 @@
#define BLEN_A 0 #define BLEN_A 0
#define SDCARDDETECT -1 // Megatronics does not use this port #define SDCARDDETECT -1 // Megatronics does not use this port
// Encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1

6
Marlin/pins_MEGATRONICS_2.h
Unescape Escape View File

@ -95,9 +95,3 @@
#define BLEN_A 0 #define BLEN_A 0
#define SDCARDDETECT -1 // Megatronics does not use this port #define SDCARDDETECT -1 // Megatronics does not use this port
// Encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1

6
Marlin/pins_MEGATRONICS_3.h
Unescape Escape View File

@ -95,9 +95,3 @@
#define BLEN_A 0 #define BLEN_A 0
#define SDCARDDETECT -1 // Megatronics does not use this port #define SDCARDDETECT -1 // Megatronics does not use this port
// Encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1

11
Marlin/pins_RAMBO.h
Unescape Escape View File

@ -116,11 +116,6 @@
#define SDCARDDETECT 81 // Ramps does not use this port #define SDCARDDETECT 81 // Ramps does not use this port
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#else //!NEWPANEL - old style panel with shift register #else //!NEWPANEL - old style panel with shift register
//arduino pin witch triggers an piezzo beeper //arduino pin witch triggers an piezzo beeper
#define BEEPER 33 No Beeper added #define BEEPER 33 No Beeper added
@ -138,12 +133,6 @@
#define LCD_PINS_D6 27 #define LCD_PINS_D6 27
#define LCD_PINS_D7 29 #define LCD_PINS_D7 29
//encoder rotation values
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
//bits in the shift register that carry the buttons for: //bits in the shift register that carry the buttons for:
// left up center down right red // left up center down right red
#define BL_LE 7 #define BL_LE 7

179
Marlin/stepper.cpp
Unescape Escape View File

@ -187,7 +187,7 @@ void checkHitEndstops()
SERIAL_ECHOPAIR(" Z:",(float)endstops_trigsteps[Z_AXIS]/axis_steps_per_unit[Z_AXIS]); SERIAL_ECHOPAIR(" Z:",(float)endstops_trigsteps[Z_AXIS]/axis_steps_per_unit[Z_AXIS]);
LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z"); LCD_MESSAGEPGM(MSG_ENDSTOPS_HIT "Z");
} }
SERIAL_ECHOLN(""); SERIAL_EOL;
endstop_x_hit=false; endstop_x_hit=false;
endstop_y_hit=false; endstop_y_hit=false;
endstop_z_hit=false; endstop_z_hit=false;
@ -399,89 +399,84 @@ ISR(TIMER1_COMPA_vect)
count_direction[Y_AXIS]=1; count_direction[Y_AXIS]=1;
} }
// Set direction en check limit switches if(check_endstops) // check X and Y Endstops
#ifndef COREXY
if ((out_bits & (1<<X_AXIS)) != 0) // stepping along -X axis
#else
if ((out_bits & (1<<X_HEAD)) != 0) //AlexBorro: Head direction in -X axis for CoreXY bots.
#endif
{ {
CHECK_ENDSTOPS #ifndef COREXY
{ if ((out_bits & (1<<X_AXIS)) != 0) // stepping along -X axis (regular cartesians bot)
#ifdef DUAL_X_CARRIAGE #else
// with 2 x-carriages, endstops are only checked in the homing direction for the active extruder if (!((current_block->steps_x == current_block->steps_y) && ((out_bits & (1<<X_AXIS))>>X_AXIS != (out_bits & (1<<Y_AXIS))>>Y_AXIS))) // AlexBorro: If DeltaX == -DeltaY, the movement is only in Y axis
if ((current_block->active_extruder == 0 && X_HOME_DIR == -1) if ((out_bits & (1<<X_HEAD)) != 0) //AlexBorro: Head direction in -X axis for CoreXY bots.
|| (current_block->active_extruder != 0 && X2_HOME_DIR == -1)) #endif
#endif { // -direction
{ #ifdef DUAL_X_CARRIAGE
#if defined(X_MIN_PIN) && X_MIN_PIN > -1 // with 2 x-carriages, endstops are only checked in the homing direction for the active extruder
bool x_min_endstop=(READ(X_MIN_PIN) != X_MIN_ENDSTOP_INVERTING); if ((current_block->active_extruder == 0 && X_HOME_DIR == -1) || (current_block->active_extruder != 0 && X2_HOME_DIR == -1))
if(x_min_endstop && old_x_min_endstop && (current_block->steps_x > 0)) { #endif
endstops_trigsteps[X_AXIS] = count_position[X_AXIS]; {
endstop_x_hit=true; #if defined(X_MIN_PIN) && X_MIN_PIN > -1
step_events_completed = current_block->step_event_count; bool x_min_endstop=(READ(X_MIN_PIN) != X_MIN_ENDSTOP_INVERTING);
if(x_min_endstop && old_x_min_endstop && (current_block->steps_x > 0))
{
endstops_trigsteps[X_AXIS] = count_position[X_AXIS];
endstop_x_hit=true;
step_events_completed = current_block->step_event_count;
}
old_x_min_endstop = x_min_endstop;
#endif
} }
old_x_min_endstop = x_min_endstop;
#endif
} }
} else
} { // +direction
else #ifdef DUAL_X_CARRIAGE
{ // +direction // with 2 x-carriages, endstops are only checked in the homing direction for the active extruder
CHECK_ENDSTOPS if ((current_block->active_extruder == 0 && X_HOME_DIR == 1) || (current_block->active_extruder != 0 && X2_HOME_DIR == 1))
{ #endif
#ifdef DUAL_X_CARRIAGE {
// with 2 x-carriages, endstops are only checked in the homing direction for the active extruder #if defined(X_MAX_PIN) && X_MAX_PIN > -1
if ((current_block->active_extruder == 0 && X_HOME_DIR == 1) bool x_max_endstop=(READ(X_MAX_PIN) != X_MAX_ENDSTOP_INVERTING);
|| (current_block->active_extruder != 0 && X2_HOME_DIR == 1)) if(x_max_endstop && old_x_max_endstop && (current_block->steps_x > 0))
#endif {
{ endstops_trigsteps[X_AXIS] = count_position[X_AXIS];
#if defined(X_MAX_PIN) && X_MAX_PIN > -1 endstop_x_hit=true;
bool x_max_endstop=(READ(X_MAX_PIN) != X_MAX_ENDSTOP_INVERTING); step_events_completed = current_block->step_event_count;
if(x_max_endstop && old_x_max_endstop && (current_block->steps_x > 0)){ }
endstops_trigsteps[X_AXIS] = count_position[X_AXIS]; old_x_max_endstop = x_max_endstop;
endstop_x_hit=true; #endif
step_events_completed = current_block->step_event_count;
} }
old_x_max_endstop = x_max_endstop;
#endif
} }
}
}
#ifndef COREXY #ifndef COREXY
if ((out_bits & (1<<Y_AXIS)) != 0) // -direction if ((out_bits & (1<<Y_AXIS)) != 0) // -direction
#else #else
if ((out_bits & (1<<Y_HEAD)) != 0) //AlexBorro: Head direction in -Y axis for CoreXY bots. if (!((current_block->steps_x == current_block->steps_y) && ((out_bits & (1<<X_AXIS))>>X_AXIS == (out_bits & (1<<Y_AXIS))>>Y_AXIS))) // AlexBorro: If DeltaX == DeltaY, the movement is only in X axis
#endif if ((out_bits & (1<<Y_HEAD)) != 0) //AlexBorro: Head direction in -Y axis for CoreXY bots.
{
CHECK_ENDSTOPS
{
#if defined(Y_MIN_PIN) && Y_MIN_PIN > -1
bool y_min_endstop=(READ(Y_MIN_PIN) != Y_MIN_ENDSTOP_INVERTING);
if(y_min_endstop && old_y_min_endstop && (current_block->steps_y > 0)) {
endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS];
endstop_y_hit=true;
step_events_completed = current_block->step_event_count;
}
old_y_min_endstop = y_min_endstop;
#endif
}
}
else
{ // +direction
CHECK_ENDSTOPS
{
#if defined(Y_MAX_PIN) && Y_MAX_PIN > -1
bool y_max_endstop=(READ(Y_MAX_PIN) != Y_MAX_ENDSTOP_INVERTING);
if(y_max_endstop && old_y_max_endstop && (current_block->steps_y > 0)){
endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS];
endstop_y_hit=true;
step_events_completed = current_block->step_event_count;
}
old_y_max_endstop = y_max_endstop;
#endif #endif
} { // -direction
#if defined(Y_MIN_PIN) && Y_MIN_PIN > -1
bool y_min_endstop=(READ(Y_MIN_PIN) != Y_MIN_ENDSTOP_INVERTING);
if(y_min_endstop && old_y_min_endstop && (current_block->steps_y > 0))
{
endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS];
endstop_y_hit=true;
step_events_completed = current_block->step_event_count;
}
old_y_min_endstop = y_min_endstop;
#endif
}
else
{ // +direction
#if defined(Y_MAX_PIN) && Y_MAX_PIN > -1
bool y_max_endstop=(READ(Y_MAX_PIN) != Y_MAX_ENDSTOP_INVERTING);
if(y_max_endstop && old_y_max_endstop && (current_block->steps_y > 0))
{
endstops_trigsteps[Y_AXIS] = count_position[Y_AXIS];
endstop_y_hit=true;
step_events_completed = current_block->step_event_count;
}
old_y_max_endstop = y_max_endstop;
#endif
}
} }
if ((out_bits & (1<<Z_AXIS)) != 0) { // -direction if ((out_bits & (1<<Z_AXIS)) != 0) { // -direction
@ -964,51 +959,41 @@ void st_init()
//Initialize Step Pins //Initialize Step Pins
#if defined(X_STEP_PIN) && (X_STEP_PIN > -1) #if defined(X_STEP_PIN) && (X_STEP_PIN > -1)
SET_OUTPUT(X_STEP_PIN); OUT_WRITE(X_STEP_PIN,INVERT_X_STEP_PIN);
WRITE(X_STEP_PIN,INVERT_X_STEP_PIN);
disable_x(); disable_x();
#endif #endif
#if defined(X2_STEP_PIN) && (X2_STEP_PIN > -1) #if defined(X2_STEP_PIN) && (X2_STEP_PIN > -1)
SET_OUTPUT(X2_STEP_PIN); OUT_WRITE(X2_STEP_PIN,INVERT_X_STEP_PIN);
WRITE(X2_STEP_PIN,INVERT_X_STEP_PIN);
disable_x(); disable_x();
#endif #endif
#if defined(Y_STEP_PIN) && (Y_STEP_PIN > -1) #if defined(Y_STEP_PIN) && (Y_STEP_PIN > -1)
SET_OUTPUT(Y_STEP_PIN); OUT_WRITE(Y_STEP_PIN,INVERT_Y_STEP_PIN);
WRITE(Y_STEP_PIN,INVERT_Y_STEP_PIN);
#if defined(Y_DUAL_STEPPER_DRIVERS) && defined(Y2_STEP_PIN) && (Y2_STEP_PIN > -1) #if defined(Y_DUAL_STEPPER_DRIVERS) && defined(Y2_STEP_PIN) && (Y2_STEP_PIN > -1)
SET_OUTPUT(Y2_STEP_PIN); OUT_WRITE(Y2_STEP_PIN,INVERT_Y_STEP_PIN);
WRITE(Y2_STEP_PIN,INVERT_Y_STEP_PIN);
#endif #endif
disable_y(); disable_y();
#endif #endif
#if defined(Z_STEP_PIN) && (Z_STEP_PIN > -1) #if defined(Z_STEP_PIN) && (Z_STEP_PIN > -1)
SET_OUTPUT(Z_STEP_PIN); OUT_WRITE(Z_STEP_PIN,INVERT_Z_STEP_PIN);
WRITE(Z_STEP_PIN,INVERT_Z_STEP_PIN);
#if defined(Z_DUAL_STEPPER_DRIVERS) && defined(Z2_STEP_PIN) && (Z2_STEP_PIN > -1) #if defined(Z_DUAL_STEPPER_DRIVERS) && defined(Z2_STEP_PIN) && (Z2_STEP_PIN > -1)
SET_OUTPUT(Z2_STEP_PIN); OUT_WRITE(Z2_STEP_PIN,INVERT_Z_STEP_PIN);
WRITE(Z2_STEP_PIN,INVERT_Z_STEP_PIN);
#endif #endif
disable_z(); disable_z();
#endif #endif
#if defined(E0_STEP_PIN) && (E0_STEP_PIN > -1) #if defined(E0_STEP_PIN) && (E0_STEP_PIN > -1)
SET_OUTPUT(E0_STEP_PIN); OUT_WRITE(E0_STEP_PIN,INVERT_E_STEP_PIN);
WRITE(E0_STEP_PIN,INVERT_E_STEP_PIN);
disable_e0(); disable_e0();
#endif #endif
#if defined(E1_STEP_PIN) && (E1_STEP_PIN > -1) #if defined(E1_STEP_PIN) && (E1_STEP_PIN > -1)
SET_OUTPUT(E1_STEP_PIN); OUT_WRITE(E1_STEP_PIN,INVERT_E_STEP_PIN);
WRITE(E1_STEP_PIN,INVERT_E_STEP_PIN);
disable_e1(); disable_e1();
#endif #endif
#if defined(E2_STEP_PIN) && (E2_STEP_PIN > -1) #if defined(E2_STEP_PIN) && (E2_STEP_PIN > -1)
SET_OUTPUT(E2_STEP_PIN); OUT_WRITE(E2_STEP_PIN,INVERT_E_STEP_PIN);
WRITE(E2_STEP_PIN,INVERT_E_STEP_PIN);
disable_e2(); disable_e2();
#endif #endif
#if defined(E3_STEP_PIN) && (E3_STEP_PIN > -1) #if defined(E3_STEP_PIN) && (E3_STEP_PIN > -1)
SET_OUTPUT(E3_STEP_PIN); OUT_WRITE(E3_STEP_PIN,INVERT_E_STEP_PIN);
WRITE(E3_STEP_PIN,INVERT_E_STEP_PIN);
disable_e3(); disable_e3();
#endif #endif

14
Marlin/temperature.cpp
Unescape Escape View File

@ -901,21 +901,15 @@ void tp_init()
#ifdef HEATER_0_USES_MAX6675 #ifdef HEATER_0_USES_MAX6675
#ifndef SDSUPPORT #ifndef SDSUPPORT
SET_OUTPUT(SCK_PIN); OUT_WRITE(SCK_PIN, LOW);
WRITE(SCK_PIN,0); OUT_WRITE(MOSI_PIN, HIGH);
OUT_WRITE(MISO_PIN, HIGH);
SET_OUTPUT(MOSI_PIN);
WRITE(MOSI_PIN,1);
SET_INPUT(MISO_PIN);
WRITE(MISO_PIN,1);
#else #else
pinMode(SS_PIN, OUTPUT); pinMode(SS_PIN, OUTPUT);
digitalWrite(SS_PIN, HIGH); digitalWrite(SS_PIN, HIGH);
#endif #endif
SET_OUTPUT(MAX6675_SS); OUT_WRITE(MAX6675_SS,HIGH);
WRITE(MAX6675_SS,1);
#endif //HEATER_0_USES_MAX6675 #endif //HEATER_0_USES_MAX6675

11
Marlin/ultralcd.cpp
Unescape Escape View File

@ -1394,6 +1394,17 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; }
#ifdef ULTIPANEL #ifdef ULTIPANEL
////////////////////////
// Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
// These values are independent of which pins are used for EN_A and EN_B indications
// The rotary encoder part is also independent to the chipset used for the LCD
#if defined(EN_A) && defined(EN_B)
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif
/* Warning: This function is called from interrupt context */ /* Warning: This function is called from interrupt context */
void lcd_buttons_update() { void lcd_buttons_update() {
#ifdef NEWPANEL #ifdef NEWPANEL

49
Marlin/ultralcd_implementation_hitachi_HD44780.h
Unescape Escape View File

@ -123,17 +123,6 @@
#define LCD_CLICKED (buttons&(B_MI|B_ST)) #define LCD_CLICKED (buttons&(B_MI|B_ST))
#endif #endif
////////////////////////
// Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
// These values are independent of which pins are used for EN_A and EN_B indications
// The rotary encoder part is also independent to the chipset used for the LCD
#if defined(EN_A) && defined(EN_B)
#define encrot0 0
#define encrot1 2
#define encrot2 3
#define encrot3 1
#endif
#endif //ULTIPANEL #endif //ULTIPANEL
//////////////////////////////////// ////////////////////////////////////
@ -832,32 +821,28 @@ static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pst
static void lcd_implementation_quick_feedback() static void lcd_implementation_quick_feedback()
{ {
#ifdef LCD_USE_I2C_BUZZER #ifdef LCD_USE_I2C_BUZZER
#if !defined(LCD_FEEDBACK_FREQUENCY_HZ) || !defined(LCD_FEEDBACK_FREQUENCY_DURATION_MS) #if defined(LCD_FEEDBACK_FREQUENCY_DURATION_MS) && defined(LCD_FEEDBACK_FREQUENCY_HZ)
lcd_buzz(1000/6,100); lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ);
#else #else
lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS,LCD_FEEDBACK_FREQUENCY_HZ); lcd_buzz(1000/6, 100);
#endif #endif
#elif defined(BEEPER) && BEEPER > -1 #elif defined(BEEPER) && BEEPER > -1
SET_OUTPUT(BEEPER); SET_OUTPUT(BEEPER);
#if !defined(LCD_FEEDBACK_FREQUENCY_HZ) || !defined(LCD_FEEDBACK_FREQUENCY_DURATION_MS) #if !defined(LCD_FEEDBACK_FREQUENCY_HZ) || !defined(LCD_FEEDBACK_FREQUENCY_DURATION_MS)
for(int8_t i=0;i<10;i++) const unsigned int delay = 100;
{ uint8_t i = 10;
WRITE(BEEPER,HIGH);
delayMicroseconds(100);
WRITE(BEEPER,LOW);
delayMicroseconds(100);
}
#else #else
for(int8_t i=0;i<(LCD_FEEDBACK_FREQUENCY_DURATION_MS / (1000 / LCD_FEEDBACK_FREQUENCY_HZ));i++) const unsigned int delay = 1000000 / LCD_FEEDBACK_FREQUENCY_HZ / 2;
{ int8_t i = LCD_FEEDBACK_FREQUENCY_DURATION_MS * LCD_FEEDBACK_FREQUENCY_HZ / 1000;
#endif
while (i--) {
WRITE(BEEPER,HIGH); WRITE(BEEPER,HIGH);
delayMicroseconds(1000000 / LCD_FEEDBACK_FREQUENCY_HZ / 2); delayMicroseconds(delay);
WRITE(BEEPER,LOW); WRITE(BEEPER,LOW);
delayMicroseconds(1000000 / LCD_FEEDBACK_FREQUENCY_HZ / 2); delayMicroseconds(delay);
} }
#endif #endif
#endif
} }
#ifdef LCD_HAS_STATUS_INDICATORS #ifdef LCD_HAS_STATUS_INDICATORS

9
Marlin/ultralcd_st7920_u8glib_rrd.h
Unescape Escape View File

@ -47,12 +47,9 @@ uint8_t u8g_dev_rrd_st7920_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, vo
{ {
case U8G_DEV_MSG_INIT: case U8G_DEV_MSG_INIT:
{ {
SET_OUTPUT(ST7920_CS_PIN); OUT_WRITE(ST7920_CS_PIN,LOW);
WRITE(ST7920_CS_PIN,0); OUT_WRITE(ST7920_DAT_PIN,LOW);
SET_OUTPUT(ST7920_DAT_PIN); OUT_WRITE(ST7920_CLK_PIN,HIGH);
WRITE(ST7920_DAT_PIN,0);
SET_OUTPUT(ST7920_CLK_PIN);
WRITE(ST7920_CLK_PIN,1);
ST7920_CS(); ST7920_CS();
u8g_Delay(120); //initial delay for boot up u8g_Delay(120); //initial delay for boot up

Write Preview
Loading…
Cancel
Save