microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Add NANODLP_ALL_AXIS to config examples

Browse Source
2.0.x
Scott Lahteine 7 years ago
parent 5595098063
commit 674deaf223
36 changed files with 216 additions and 108 deletions
Show Stats Download Patch File Download Diff File

7
Marlin/src/config/default/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h
Unescape Escape View File

@ -1542,13 +1542,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Cartesio/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
Unescape Escape View File

@ -1544,13 +1544,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Felix/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
Unescape Escape View File

@ -1550,13 +1550,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/MakerParts/Configuration_adv.h
Unescape Escape View File

@ -1513,13 +1513,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
Unescape Escape View File

@ -1538,13 +1538,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
Unescape Escape View File

@ -1542,13 +1542,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
Unescape Escape View File

@ -1549,13 +1549,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/RigidBot/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/SCARA/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
Unescape Escape View File

@ -1530,13 +1530,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
Unescape Escape View File

@ -1552,13 +1552,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
Unescape Escape View File

@ -1542,13 +1542,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
Unescape Escape View File

@ -1543,13 +1543,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
Unescape Escape View File

@ -1543,13 +1543,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
Unescape Escape View File

@ -1543,13 +1543,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/delta/generic/Configuration_adv.h
Unescape Escape View File

@ -1543,13 +1543,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
Unescape Escape View File

@ -1543,13 +1543,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h
Unescape Escape View File

@ -1548,13 +1548,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
Unescape Escape View File

@ -1543,13 +1543,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
Unescape Escape View File

@ -1542,13 +1542,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/makibox/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
Unescape Escape View File

@ -1541,13 +1541,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

7
Marlin/src/config/examples/wt150/Configuration_adv.h
Unescape Escape View File

@ -1542,13 +1542,16 @@
#endif #endif
/** /**
* NanoDLP Synch support * NanoDLP Sync support
* *
* Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
* string to enable synchronization with DLP projector exposure. This change will allow to use * string to enable synchronization with DLP projector exposure. This change will allow to use
* [[WaitForDoneMessage]] instead of populating your gcode with M400 commands * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
*
*/ */
//#define NANODLP_Z_SYNC //#define NANODLP_Z_SYNC
#if ENABLED(NANODLP_Z_SYNC)
//#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
// Default behaviour is limited to Z axis only.
#endif
#endif // CONFIGURATION_ADV_H #endif // CONFIGURATION_ADV_H

Write Preview
Loading…
Cancel
Save