Silvio
9 years ago
commit
62612580ef
@ -0,0 +1,4 @@
|
|||||||
|
#!/usr/bin/env bash
|
||||||
|
|
||||||
|
rm -rf .build/
|
||||||
|
DISPLAY=:1.0 ~/bin/arduino --verify --board marlin:avr:mega Marlin/Marlin.ino
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
#!/usr/bin/env bash
|
||||||
|
|
||||||
|
for opt in "$@" ; do
|
||||||
|
eval "sed -i 's/\(\/\/ *\)*\(\#define *$opt\)/\/\/\2/g' Marlin/Configuration.h"
|
||||||
|
done
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
#!/usr/bin/env bash
|
||||||
|
|
||||||
|
for opt in "$@" ; do
|
||||||
|
eval "sed -i 's/\/\/ *\(#define *$opt\)/\1/g' Marlin/Configuration.h"
|
||||||
|
done
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
#!/usr/bin/env bash
|
||||||
|
|
||||||
|
for opt in "$@" ; do
|
||||||
|
eval "sed -i 's/\/\/ *\(#define *$opt\)/\1/g' Marlin/Configuration_adv.h"
|
||||||
|
done
|
||||||
@ -0,0 +1,3 @@
|
|||||||
|
#!/usr/bin/env bash
|
||||||
|
|
||||||
|
eval "sed -i 's/\(#define *$1\) *.*$/\1 $2/g' Marlin/Configuration.h"
|
||||||
@ -0,0 +1,3 @@
|
|||||||
|
#!/usr/bin/env bash
|
||||||
|
|
||||||
|
eval "sed -i 's/\(#define *$1\) *.*$/\1 $2/g' Marlin/Configuration_adv.h"
|
||||||
@ -0,0 +1,3 @@
|
|||||||
|
#!/usr/bin/env bash
|
||||||
|
|
||||||
|
eval "sed -i 's/\(#define *$2\) *.*$/\1 $3/g' Marlin/pins_$1.h"
|
||||||
@ -0,0 +1,5 @@
|
|||||||
|
#!/usr/bin/env bash
|
||||||
|
|
||||||
|
cp Marlin/Configuration.h.backup Marlin/Configuration.h
|
||||||
|
cp Marlin/Configuration_adv.h.backup Marlin/Configuration_adv.h
|
||||||
|
cp Marlin/pins_RAMPS_14.h.backup Marlin/pins_RAMPS_14.h
|
||||||
@ -0,0 +1,3 @@
|
|||||||
|
#!/usr/bin/env bash
|
||||||
|
|
||||||
|
eval "cp Marlin/example_configurations/$1/Configuration* Marlin/"
|
||||||
File diff suppressed because it is too large
Load Diff
@ -1 +0,0 @@
|
|||||||
Header set Access-Control-Allow-Origin "*"
|
|
||||||
@ -1,64 +0,0 @@
|
|||||||
#ifndef BOARDS_H
|
|
||||||
#define BOARDS_H
|
|
||||||
|
|
||||||
#define BOARD_UNKNOWN -1
|
|
||||||
|
|
||||||
#define BOARD_GEN7_CUSTOM 10 // Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
|
|
||||||
#define BOARD_GEN7_12 11 // Gen7 v1.1, v1.2
|
|
||||||
#define BOARD_GEN7_13 12 // Gen7 v1.3
|
|
||||||
#define BOARD_GEN7_14 13 // Gen7 v1.4
|
|
||||||
#define BOARD_CHEAPTRONIC 2 // Cheaptronic v1.0
|
|
||||||
#define BOARD_SETHI 20 // Sethi 3D_1
|
|
||||||
#define BOARD_RAMPS_OLD 3 // MEGA/RAMPS up to 1.2
|
|
||||||
#define BOARD_RAMPS_13_EFB 33 // RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
|
|
||||||
#define BOARD_RAMPS_13_EEB 34 // RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
|
|
||||||
#define BOARD_RAMPS_13_EFF 35 // RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
|
|
||||||
#define BOARD_RAMPS_13_EEF 36 // RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Fan)
|
|
||||||
#define BOARD_RAMPS_13_SF 38 // RAMPS 1.3 / 1.4 (Power outputs: Spindle, Controller Fan)
|
|
||||||
#define BOARD_FELIX2 37 // Felix 2.0+ Electronics Board (RAMPS like)
|
|
||||||
#define BOARD_RIGIDBOARD 42 // Invent-A-Part RigidBoard
|
|
||||||
#define BOARD_GEN6 5 // Gen6
|
|
||||||
#define BOARD_GEN6_DELUXE 51 // Gen6 deluxe
|
|
||||||
#define BOARD_SANGUINOLOLU_11 6 // Sanguinololu < 1.2
|
|
||||||
#define BOARD_SANGUINOLOLU_12 62 // Sanguinololu 1.2 and above
|
|
||||||
#define BOARD_MELZI 63 // Melzi
|
|
||||||
#define BOARD_STB_11 64 // STB V1.1
|
|
||||||
#define BOARD_AZTEEG_X1 65 // Azteeg X1
|
|
||||||
#define BOARD_MELZI_MAKR3D 66 // Melzi with ATmega1284 (MaKr3d version)
|
|
||||||
#define BOARD_AZTEEG_X3 67 // Azteeg X3
|
|
||||||
#define BOARD_AZTEEG_X3_PRO 68 // Azteeg X3 Pro
|
|
||||||
#define BOARD_ULTIMAKER 7 // Ultimaker
|
|
||||||
#define BOARD_ULTIMAKER_OLD 71 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
|
||||||
#define BOARD_ULTIMAIN_2 72 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
|
||||||
#define BOARD_3DRAG 77 // 3Drag Controller
|
|
||||||
#define BOARD_K8200 78 // Vellemann K8200 Controller (derived from 3Drag Controller)
|
|
||||||
#define BOARD_TEENSYLU 8 // Teensylu
|
|
||||||
#define BOARD_RUMBA 80 // Rumba
|
|
||||||
#define BOARD_PRINTRBOARD 81 // Printrboard (AT90USB1286)
|
|
||||||
#define BOARD_BRAINWAVE 82 // Brainwave (AT90USB646)
|
|
||||||
#define BOARD_SAV_MKI 83 // SAV Mk-I (AT90USB1286)
|
|
||||||
#define BOARD_TEENSY2 84 // Teensy++2.0 (AT90USB1286) - CLI compile: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84 make
|
|
||||||
#define BOARD_BRAINWAVE_PRO 85 // Brainwave Pro (AT90USB1286)
|
|
||||||
#define BOARD_GEN3_PLUS 9 // Gen3+
|
|
||||||
#define BOARD_GEN3_MONOLITHIC 22 // Gen3 Monolithic Electronics
|
|
||||||
#define BOARD_MEGATRONICS 70 // Megatronics
|
|
||||||
#define BOARD_MEGATRONICS_2 701 // Megatronics v2.0
|
|
||||||
#define BOARD_MINITRONICS 702 // Minitronics v1.0/1.1
|
|
||||||
#define BOARD_MEGATRONICS_3 703 // Megatronics v3.0
|
|
||||||
#define BOARD_OMCA_A 90 // Alpha OMCA board
|
|
||||||
#define BOARD_OMCA 91 // Final OMCA board
|
|
||||||
#define BOARD_RAMBO 301 // Rambo
|
|
||||||
#define BOARD_MINIRAMBO 302 // Mini-Rambo
|
|
||||||
#define BOARD_MEGACONTROLLER 310 // Mega controller
|
|
||||||
#define BOARD_ELEFU_3 21 // Elefu Ra Board (v3)
|
|
||||||
#define BOARD_5DPRINT 88 // 5DPrint D8 Driver Board
|
|
||||||
#define BOARD_LEAPFROG 999 // Leapfrog
|
|
||||||
#define BOARD_MKS_BASE 40 // MKS BASE 1.0
|
|
||||||
#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers
|
|
||||||
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
|
|
||||||
|
|
||||||
#define BOARD_99 99 // This is in pins.h but...?
|
|
||||||
|
|
||||||
#define MB(board) (MOTHERBOARD==BOARD_##board)
|
|
||||||
|
|
||||||
#endif //__BOARDS_H
|
|
||||||
@ -1,228 +0,0 @@
|
|||||||
#ifndef LANGUAGE_H
|
|
||||||
#define LANGUAGE_H
|
|
||||||
|
|
||||||
#include "Configuration.h"
|
|
||||||
|
|
||||||
#define LANGUAGE_CONCAT(M) #M
|
|
||||||
#define GENERATE_LANGUAGE_INCLUDE(M) LANGUAGE_CONCAT(language_##M.h)
|
|
||||||
|
|
||||||
|
|
||||||
// NOTE: IF YOU CHANGE LANGUAGE FILES OR MERGE A FILE WITH CHANGES
|
|
||||||
//
|
|
||||||
// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
|
|
||||||
// ==> ALSO TRY ALL AVAILABLE LANGUAGE OPTIONS
|
|
||||||
// See also documentation/LCDLanguageFont.md
|
|
||||||
|
|
||||||
// Languages
|
|
||||||
// en English
|
|
||||||
// pl Polish
|
|
||||||
// fr French
|
|
||||||
// de German
|
|
||||||
// es Spanish
|
|
||||||
// ru Russian
|
|
||||||
// bg Bulgarian
|
|
||||||
// it Italian
|
|
||||||
// pt Portuguese
|
|
||||||
// pt-br Portuguese (Brazil)
|
|
||||||
// fi Finnish
|
|
||||||
// an Aragonese
|
|
||||||
// nl Dutch
|
|
||||||
// ca Catalan
|
|
||||||
// eu Basque-Euskera
|
|
||||||
// kana Japanese
|
|
||||||
// kana_utf Japanese
|
|
||||||
// cn Chinese
|
|
||||||
|
|
||||||
// fallback if no language is set, don't change
|
|
||||||
#ifndef LANGUAGE_INCLUDE
|
|
||||||
#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(USE_AUTOMATIC_VERSIONING)
|
|
||||||
#include "_Version.h"
|
|
||||||
#else
|
|
||||||
#include "Default_Version.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define PROTOCOL_VERSION "1.0"
|
|
||||||
|
|
||||||
#if MB(ULTIMAKER)|| MB(ULTIMAKER_OLD)|| MB(ULTIMAIN_2)
|
|
||||||
#define MACHINE_NAME "Ultimaker"
|
|
||||||
#define SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
|
|
||||||
#elif MB(RUMBA)
|
|
||||||
#define MACHINE_NAME "Rumba"
|
|
||||||
#elif MB(3DRAG)
|
|
||||||
#define MACHINE_NAME "3Drag"
|
|
||||||
#define SOURCE_CODE_URL "http://3dprint.elettronicain.it/"
|
|
||||||
#elif MB(K8200)
|
|
||||||
#define MACHINE_NAME "K8200"
|
|
||||||
#define SOURCE_CODE_URL "https://github.com/CONSULitAS/Marlin-K8200"
|
|
||||||
#elif MB(5DPRINT)
|
|
||||||
#define MACHINE_NAME "Makibox"
|
|
||||||
#elif MB(SAV_MKI)
|
|
||||||
#define MACHINE_NAME "SAV MkI"
|
|
||||||
#define SOURCE_CODE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
|
|
||||||
#elif !defined(MACHINE_NAME)
|
|
||||||
#define MACHINE_NAME "3D Printer"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifdef CUSTOM_MACHINE_NAME
|
|
||||||
#undef MACHINE_NAME
|
|
||||||
#define MACHINE_NAME CUSTOM_MACHINE_NAME
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifndef SOURCE_CODE_URL
|
|
||||||
#define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifndef DETAILED_BUILD_VERSION
|
|
||||||
#error BUILD_VERSION Information must be specified
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifndef MACHINE_UUID
|
|
||||||
#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
|
|
||||||
#define STRINGIFY_(n) #n
|
|
||||||
#define STRINGIFY(n) STRINGIFY_(n)
|
|
||||||
|
|
||||||
|
|
||||||
// Common LCD messages
|
|
||||||
|
|
||||||
/* nothing here yet */
|
|
||||||
|
|
||||||
// Common serial messages
|
|
||||||
#define MSG_MARLIN "Marlin"
|
|
||||||
|
|
||||||
// Serial Console Messages (do not translate those!)
|
|
||||||
|
|
||||||
#define MSG_Enqueueing "enqueueing \""
|
|
||||||
#define MSG_POWERUP "PowerUp"
|
|
||||||
#define MSG_EXTERNAL_RESET " External Reset"
|
|
||||||
#define MSG_BROWNOUT_RESET " Brown out Reset"
|
|
||||||
#define MSG_WATCHDOG_RESET " Watchdog Reset"
|
|
||||||
#define MSG_SOFTWARE_RESET " Software Reset"
|
|
||||||
#define MSG_AUTHOR " | Author: "
|
|
||||||
#define MSG_CONFIGURATION_VER " Last Updated: "
|
|
||||||
#define MSG_FREE_MEMORY " Free Memory: "
|
|
||||||
#define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
|
|
||||||
#define MSG_OK "ok"
|
|
||||||
#define MSG_WAIT "wait"
|
|
||||||
#define MSG_FILE_SAVED "Done saving file."
|
|
||||||
#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
|
|
||||||
#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
|
|
||||||
#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
|
|
||||||
#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
|
|
||||||
#define MSG_FILE_PRINTED "Done printing file"
|
|
||||||
#define MSG_BEGIN_FILE_LIST "Begin file list"
|
|
||||||
#define MSG_END_FILE_LIST "End file list"
|
|
||||||
#define MSG_INVALID_EXTRUDER "Invalid extruder"
|
|
||||||
#define MSG_INVALID_SOLENOID "Invalid solenoid"
|
|
||||||
#define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
|
|
||||||
#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin " DETAILED_BUILD_VERSION " SOURCE_CODE_URL:" SOURCE_CODE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
|
|
||||||
#define MSG_COUNT_X " Count X: "
|
|
||||||
#define MSG_ERR_KILLED "Printer halted. kill() called!"
|
|
||||||
#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
|
|
||||||
#define MSG_RESEND "Resend: "
|
|
||||||
#define MSG_UNKNOWN_COMMAND "Unknown command: \""
|
|
||||||
#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
|
|
||||||
#define MSG_X_MIN "x_min: "
|
|
||||||
#define MSG_X_MAX "x_max: "
|
|
||||||
#define MSG_Y_MIN "y_min: "
|
|
||||||
#define MSG_Y_MAX "y_max: "
|
|
||||||
#define MSG_Z_MIN "z_min: "
|
|
||||||
#define MSG_Z_MAX "z_max: "
|
|
||||||
#define MSG_Z2_MAX "z2_max: "
|
|
||||||
#define MSG_Z_PROBE "z_probe: "
|
|
||||||
#define MSG_ERR_MATERIAL_INDEX "M145 S<index> out of range (0-1)"
|
|
||||||
#define MSG_ERR_M421_REQUIRES_XYZ "M421 requires XYZ parameters"
|
|
||||||
#define MSG_ERR_MESH_INDEX_OOB "Mesh XY index is out of bounds"
|
|
||||||
#define MSG_ERR_M428_TOO_FAR "Too far from reference point"
|
|
||||||
#define MSG_M119_REPORT "Reporting endstop status"
|
|
||||||
#define MSG_ENDSTOP_HIT "TRIGGERED"
|
|
||||||
#define MSG_ENDSTOP_OPEN "open"
|
|
||||||
#define MSG_HOTEND_OFFSET "Hotend offsets:"
|
|
||||||
|
|
||||||
#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
|
|
||||||
#define MSG_SD_INIT_FAIL "SD init fail"
|
|
||||||
#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
|
|
||||||
#define MSG_SD_OPENROOT_FAIL "openRoot failed"
|
|
||||||
#define MSG_SD_CARD_OK "SD card ok"
|
|
||||||
#define MSG_SD_WORKDIR_FAIL "workDir open failed"
|
|
||||||
#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
|
|
||||||
#define MSG_SD_FILE_OPENED "File opened: "
|
|
||||||
#define MSG_SD_SIZE " Size: "
|
|
||||||
#define MSG_SD_FILE_SELECTED "File selected"
|
|
||||||
#define MSG_SD_WRITE_TO_FILE "Writing to file: "
|
|
||||||
#define MSG_SD_PRINTING_BYTE "SD printing byte "
|
|
||||||
#define MSG_SD_NOT_PRINTING "Not SD printing"
|
|
||||||
#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
|
|
||||||
#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
|
|
||||||
|
|
||||||
#define MSG_STEPPER_TOO_HIGH "Steprate too high: "
|
|
||||||
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
|
||||||
#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
|
|
||||||
#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
|
|
||||||
#define MSG_TOO_COLD_FOR_M600 "M600 Hotend too cold to change filament"
|
|
||||||
#define MSG_BABYSTEPPING_X "Babystepping X"
|
|
||||||
#define MSG_BABYSTEPPING_Y "Babystepping Y"
|
|
||||||
#define MSG_BABYSTEPPING_Z "Babystepping Z"
|
|
||||||
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
|
|
||||||
|
|
||||||
#define MSG_ERR_EEPROM_WRITE "Error writing to EEPROM!"
|
|
||||||
|
|
||||||
// temperature.cpp strings
|
|
||||||
#define MSG_PID_AUTOTUNE "PID Autotune"
|
|
||||||
#define MSG_PID_AUTOTUNE_START MSG_PID_AUTOTUNE " start"
|
|
||||||
#define MSG_PID_AUTOTUNE_FAILED MSG_PID_AUTOTUNE " failed!"
|
|
||||||
#define MSG_PID_BAD_EXTRUDER_NUM MSG_PID_AUTOTUNE_FAILED " Bad extruder number"
|
|
||||||
#define MSG_PID_TEMP_TOO_HIGH MSG_PID_AUTOTUNE_FAILED " Temperature too high"
|
|
||||||
#define MSG_PID_TIMEOUT MSG_PID_AUTOTUNE_FAILED " timeout"
|
|
||||||
#define MSG_BIAS " bias: "
|
|
||||||
#define MSG_D " d: "
|
|
||||||
#define MSG_T_MIN " min: "
|
|
||||||
#define MSG_T_MAX " max: "
|
|
||||||
#define MSG_KU " Ku: "
|
|
||||||
#define MSG_TU " Tu: "
|
|
||||||
#define MSG_CLASSIC_PID " Classic PID "
|
|
||||||
#define MSG_KP " Kp: "
|
|
||||||
#define MSG_KI " Ki: "
|
|
||||||
#define MSG_KD " Kd: "
|
|
||||||
#define MSG_B "B:"
|
|
||||||
#define MSG_T "T:"
|
|
||||||
#define MSG_AT " @:"
|
|
||||||
#define MSG_PID_AUTOTUNE_FINISHED MSG_PID_AUTOTUNE " finished! Put the last Kp, Ki and Kd constants from below into Configuration.h"
|
|
||||||
#define MSG_PID_DEBUG " PID_DEBUG "
|
|
||||||
#define MSG_PID_DEBUG_INPUT ": Input "
|
|
||||||
#define MSG_PID_DEBUG_OUTPUT " Output "
|
|
||||||
#define MSG_PID_DEBUG_PTERM " pTerm "
|
|
||||||
#define MSG_PID_DEBUG_ITERM " iTerm "
|
|
||||||
#define MSG_PID_DEBUG_DTERM " dTerm "
|
|
||||||
#define MSG_PID_DEBUG_CTERM " cTerm "
|
|
||||||
#define MSG_INVALID_EXTRUDER_NUM " - Invalid extruder number !"
|
|
||||||
|
|
||||||
#define MSG_HEATER_BED "bed"
|
|
||||||
#define MSG_STOPPED_HEATER ", system stopped! Heater_ID: "
|
|
||||||
#define MSG_REDUNDANCY "Heater switched off. Temperature difference between temp sensors is too high !"
|
|
||||||
#define MSG_T_HEATING_FAILED "Heating failed"
|
|
||||||
#define MSG_T_THERMAL_RUNAWAY "Thermal Runaway"
|
|
||||||
#define MSG_T_MAXTEMP "MAXTEMP triggered"
|
|
||||||
#define MSG_T_MINTEMP "MINTEMP triggered"
|
|
||||||
|
|
||||||
// Debug
|
|
||||||
#define MSG_DEBUG_ECHO "DEBUG ECHO ENABLED"
|
|
||||||
#define MSG_DEBUG_INFO "DEBUG INFO ENABLED"
|
|
||||||
#define MSG_DEBUG_ERRORS "DEBUG ERRORS ENABLED"
|
|
||||||
#define MSG_DEBUG_DRYRUN "DEBUG DRYRUN ENABLED"
|
|
||||||
|
|
||||||
// LCD Menu Messages
|
|
||||||
|
|
||||||
#if DISABLED(DISPLAY_CHARSET_HD44780_JAPAN) && DISABLED(DISPLAY_CHARSET_HD44780_WESTERN) && DISABLED(DISPLAY_CHARSET_HD44780_CYRILLIC)
|
|
||||||
#define DISPLAY_CHARSET_HD44780_JAPAN
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#include LANGUAGE_INCLUDE
|
|
||||||
#include "language_en.h"
|
|
||||||
|
|
||||||
#endif //__LANGUAGE_H
|
|
||||||
Binary file not shown.
|
Before Width: | Height: | Size: 1.2 KiB |
@ -1,129 +0,0 @@
|
|||||||
<!DOCTYPE html>
|
|
||||||
<html>
|
|
||||||
<head>
|
|
||||||
<meta charset="UTF-8">
|
|
||||||
<title>Marlin Firmware Configurator</title>
|
|
||||||
<link href='http://fonts.googleapis.com/css?family=Fira+Mono&subset=latin,latin-ext' rel='stylesheet' type='text/css' />
|
|
||||||
<script src="js/jquery-2.1.3.min.js"></script>
|
|
||||||
<script src="js/binarystring.js"></script>
|
|
||||||
<script src="js/binaryfileuploader.js"></script>
|
|
||||||
<script src="js/FileSaver.min.js"></script>
|
|
||||||
<script src="js/jszip.min.js"></script>
|
|
||||||
<script src="js/jcanvas.js"></script>
|
|
||||||
<script src="js/jstepper.js"></script>
|
|
||||||
<script src="js/configurator.js"></script>
|
|
||||||
<link rel="stylesheet" href="css/configurator.css" type="text/css" media="all" />
|
|
||||||
</head>
|
|
||||||
<body>
|
|
||||||
<section id="main">
|
|
||||||
<h1>Marlin Configurator</h1>
|
|
||||||
<p class="info">Select presets (coming soon), modify, and download.</p>
|
|
||||||
|
|
||||||
<div id="message"></div>
|
|
||||||
<div id="tabs"></div>
|
|
||||||
|
|
||||||
<form id="config_form">
|
|
||||||
|
|
||||||
<div id="tooltip"></div>
|
|
||||||
|
|
||||||
<label>Drop Files:</label><input type="file" id="file-upload" />
|
|
||||||
<label id="tipson"><input type="checkbox" checked /> ?</label>
|
|
||||||
<a href="" class="download-all">Download Zip</a>
|
|
||||||
|
|
||||||
<fieldset id="info">
|
|
||||||
<legend>Info</legend>
|
|
||||||
</fieldset>
|
|
||||||
|
|
||||||
<fieldset id="machine">
|
|
||||||
<legend>Machine</legend>
|
|
||||||
|
|
||||||
<label class="newline">Serial Port:</label><select name="SERIAL_PORT"></select><div id="serial_stepper"></div>
|
|
||||||
|
|
||||||
<label>Baud Rate:</label><select name="BAUDRATE"></select>
|
|
||||||
|
|
||||||
<label>AT90USB BT IF:</label>
|
|
||||||
<input name="BLUETOOTH" type="checkbox" value="1" checked />
|
|
||||||
|
|
||||||
<label class="newline">Motherboard:</label><select name="MOTHERBOARD"></select>
|
|
||||||
|
|
||||||
<label class="newline">Custom Name:</label><input name="CUSTOM_MACHINE_NAME" type="text" size="14" maxlength="12" value="" />
|
|
||||||
|
|
||||||
<label class="newline">Machine UUID:</label><input name="MACHINE_UUID" type="text" size="38" maxlength="36" value="" />
|
|
||||||
|
|
||||||
<label class="newline">Extruders:</label><select name="EXTRUDERS"></select>
|
|
||||||
|
|
||||||
<label class="newline">Power Supply:</label><select name="POWER_SUPPLY"></select>
|
|
||||||
|
|
||||||
<label>PS Default Off:</label>
|
|
||||||
<input name="PS_DEFAULT_OFF" type="checkbox" value="1" checked />
|
|
||||||
</fieldset>
|
|
||||||
|
|
||||||
<fieldset id="homing">
|
|
||||||
<legend>Homing</legend>
|
|
||||||
</fieldset>
|
|
||||||
|
|
||||||
<fieldset id="temperature">
|
|
||||||
<legend>Temperature</legend>
|
|
||||||
<label class="newline">Temp Sensor 0:</label><select name="TEMP_SENSOR_0"></select>
|
|
||||||
<label class="newline">Temp Sensor 1:</label><select name="TEMP_SENSOR_1"></select>
|
|
||||||
<label class="newline">Temp Sensor 2:</label><select name="TEMP_SENSOR_2"></select>
|
|
||||||
<label class="newline">Bed Temp Sensor:</label><select name="TEMP_SENSOR_BED"></select>
|
|
||||||
|
|
||||||
<label>Max Diff:</label>
|
|
||||||
<input name="MAX_REDUNDANT_TEMP_SENSOR_DIFF" type="text" size="3" maxlength="2" />
|
|
||||||
|
|
||||||
<label>Temp Residency Time (s):</label>
|
|
||||||
<input name="TEMP_RESIDENCY_TIME" type="text" size="3" maxlength="2" />
|
|
||||||
</fieldset>
|
|
||||||
|
|
||||||
<fieldset id="extruder">
|
|
||||||
<legend>Extruder</legend>
|
|
||||||
</fieldset>
|
|
||||||
|
|
||||||
<fieldset id="lcd">
|
|
||||||
<legend>LCD / SD</legend>
|
|
||||||
</fieldset>
|
|
||||||
|
|
||||||
<fieldset id="bedlevel">
|
|
||||||
<legend>Bed Leveling</legend>
|
|
||||||
</fieldset>
|
|
||||||
|
|
||||||
<fieldset id="fwretract">
|
|
||||||
<legend>FW Retract</legend>
|
|
||||||
</fieldset>
|
|
||||||
|
|
||||||
<fieldset id="tmc">
|
|
||||||
<legend>TMC</legend>
|
|
||||||
</fieldset>
|
|
||||||
|
|
||||||
<fieldset id="l6470">
|
|
||||||
<legend>L6470</legend>
|
|
||||||
</fieldset>
|
|
||||||
|
|
||||||
<fieldset id="extras">
|
|
||||||
<legend>Extras</legend>
|
|
||||||
</fieldset>
|
|
||||||
|
|
||||||
<fieldset id="more">
|
|
||||||
<legend>More…</legend>
|
|
||||||
</fieldset>
|
|
||||||
|
|
||||||
<section id="config_text">
|
|
||||||
<h2>Configuration.h</h2>
|
|
||||||
<span class="disclose"></span>
|
|
||||||
<a href="" class="download">Download</a>
|
|
||||||
<pre class="hilightable config"></pre>
|
|
||||||
</section>
|
|
||||||
|
|
||||||
<section id="config_adv_text">
|
|
||||||
<h2>Configuration_adv.h</h2>
|
|
||||||
<span class="disclose"></span>
|
|
||||||
<a href="" class="download">Download</a>
|
|
||||||
<pre class="hilightable config"></pre>
|
|
||||||
</section>
|
|
||||||
|
|
||||||
<br class="clear" />
|
|
||||||
</form>
|
|
||||||
</section>
|
|
||||||
</body>
|
|
||||||
</html>
|
|
||||||
@ -1,2 +0,0 @@
|
|||||||
/*! @source http://purl.eligrey.com/github/FileSaver.js/blob/master/FileSaver.js */
|
|
||||||
var saveAs=saveAs||typeof navigator!=="undefined"&&navigator.msSaveOrOpenBlob&&navigator.msSaveOrOpenBlob.bind(navigator)||function(view){"use strict";if(typeof navigator!=="undefined"&&/MSIE [1-9]\./.test(navigator.userAgent)){return}var doc=view.document,get_URL=function(){return view.URL||view.webkitURL||view},save_link=doc.createElementNS("http://www.w3.org/1999/xhtml","a"),can_use_save_link="download"in save_link,click=function(node){var event=doc.createEvent("MouseEvents");event.initMouseEvent("click",true,false,view,0,0,0,0,0,false,false,false,false,0,null);node.dispatchEvent(event)},webkit_req_fs=view.webkitRequestFileSystem,req_fs=view.requestFileSystem||webkit_req_fs||view.mozRequestFileSystem,throw_outside=function(ex){(view.setImmediate||view.setTimeout)(function(){throw ex},0)},force_saveable_type="application/octet-stream",fs_min_size=0,arbitrary_revoke_timeout=500,revoke=function(file){var revoker=function(){if(typeof file==="string"){get_URL().revokeObjectURL(file)}else{file.remove()}};if(view.chrome){revoker()}else{setTimeout(revoker,arbitrary_revoke_timeout)}},dispatch=function(filesaver,event_types,event){event_types=[].concat(event_types);var i=event_types.length;while(i--){var listener=filesaver["on"+event_types[i]];if(typeof listener==="function"){try{listener.call(filesaver,event||filesaver)}catch(ex){throw_outside(ex)}}}},FileSaver=function(blob,name){var filesaver=this,type=blob.type,blob_changed=false,object_url,target_view,dispatch_all=function(){dispatch(filesaver,"writestart progress write writeend".split(" "))},fs_error=function(){if(blob_changed||!object_url){object_url=get_URL().createObjectURL(blob)}if(target_view){target_view.location.href=object_url}else{var new_tab=view.open(object_url,"_blank");if(new_tab==undefined&&typeof safari!=="undefined"){view.location.href=object_url}}filesaver.readyState=filesaver.DONE;dispatch_all();revoke(object_url)},abortable=function(func){return function(){if(filesaver.readyState!==filesaver.DONE){return func.apply(this,arguments)}}},create_if_not_found={create:true,exclusive:false},slice;filesaver.readyState=filesaver.INIT;if(!name){name="download"}if(can_use_save_link){object_url=get_URL().createObjectURL(blob);save_link.href=object_url;save_link.download=name;click(save_link);filesaver.readyState=filesaver.DONE;dispatch_all();revoke(object_url);return}if(view.chrome&&type&&type!==force_saveable_type){slice=blob.slice||blob.webkitSlice;blob=slice.call(blob,0,blob.size,force_saveable_type);blob_changed=true}if(webkit_req_fs&&name!=="download"){name+=".download"}if(type===force_saveable_type||webkit_req_fs){target_view=view}if(!req_fs){fs_error();return}fs_min_size+=blob.size;req_fs(view.TEMPORARY,fs_min_size,abortable(function(fs){fs.root.getDirectory("saved",create_if_not_found,abortable(function(dir){var save=function(){dir.getFile(name,create_if_not_found,abortable(function(file){file.createWriter(abortable(function(writer){writer.onwriteend=function(event){target_view.location.href=file.toURL();filesaver.readyState=filesaver.DONE;dispatch(filesaver,"writeend",event);revoke(file)};writer.onerror=function(){var error=writer.error;if(error.code!==error.ABORT_ERR){fs_error()}};"writestart progress write abort".split(" ").forEach(function(event){writer["on"+event]=filesaver["on"+event]});writer.write(blob);filesaver.abort=function(){writer.abort();filesaver.readyState=filesaver.DONE};filesaver.readyState=filesaver.WRITING}),fs_error)}),fs_error)};dir.getFile(name,{create:false},abortable(function(file){file.remove();save()}),abortable(function(ex){if(ex.code===ex.NOT_FOUND_ERR){save()}else{fs_error()}}))}),fs_error)}),fs_error)},FS_proto=FileSaver.prototype,saveAs=function(blob,name){return new FileSaver(blob,name)};FS_proto.abort=function(){var filesaver=this;filesaver.readyState=filesaver.DONE;dispatch(filesaver,"abort")};FS_proto.readyState=FS_proto.INIT=0;FS_proto.WRITING=1;FS_proto.DONE=2;FS_proto.error=FS_proto.onwritestart=FS_proto.onprogress=FS_proto.onwrite=FS_proto.onabort=FS_proto.onerror=FS_proto.onwriteend=null;return saveAs}(typeof self!=="undefined"&&self||typeof window!=="undefined"&&window||this.content);if(typeof module!=="undefined"&&module.exports){module.exports.saveAs=saveAs}else if(typeof define!=="undefined"&&define!==null&&define.amd!=null){define([],function(){return saveAs})}
|
|
||||||
@ -1,79 +0,0 @@
|
|||||||
function BinaryFileUploader(o) {
|
|
||||||
this.options = null;
|
|
||||||
|
|
||||||
|
|
||||||
this._defaultOptions = {
|
|
||||||
element: null, // HTML file element
|
|
||||||
onFileLoad: function(file) {
|
|
||||||
console.log(file.toString());
|
|
||||||
}
|
|
||||||
};
|
|
||||||
|
|
||||||
|
|
||||||
this._init = function(o) {
|
|
||||||
if (!this.hasFileUploaderSupport()) return;
|
|
||||||
|
|
||||||
this._verifyDependencies();
|
|
||||||
|
|
||||||
this.options = this._mergeObjects(this._defaultOptions, o);
|
|
||||||
this._verifyOptions();
|
|
||||||
|
|
||||||
this.addFileChangeListener();
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
this.hasFileUploaderSupport = function() {
|
|
||||||
return !!(window.File && window.FileReader && window.FileList && window.Blob);
|
|
||||||
}
|
|
||||||
|
|
||||||
this.addFileChangeListener = function() {
|
|
||||||
this.options.element.addEventListener(
|
|
||||||
'change',
|
|
||||||
this._bind(this, this.onFileChange)
|
|
||||||
);
|
|
||||||
}
|
|
||||||
|
|
||||||
this.onFileChange = function(e) {
|
|
||||||
// TODO accept multiple files
|
|
||||||
var file = e.target.files[0],
|
|
||||||
reader = new FileReader();
|
|
||||||
|
|
||||||
reader.onload = this._bind(this, this.onFileLoad);
|
|
||||||
reader.readAsBinaryString(file);
|
|
||||||
}
|
|
||||||
|
|
||||||
this.onFileLoad = function(e) {
|
|
||||||
var content = e.target.result,
|
|
||||||
string = new BinaryString(content);
|
|
||||||
this.options.onFileLoad(string);
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
this._mergeObjects = function(starting, override) {
|
|
||||||
var merged = starting;
|
|
||||||
for (key in override) merged[key] = override[key];
|
|
||||||
|
|
||||||
return merged;
|
|
||||||
}
|
|
||||||
|
|
||||||
this._verifyOptions = function() {
|
|
||||||
if (!(this.options.element && this.options.element.type && this.options.element.type === 'file')) {
|
|
||||||
throw 'Invalid element param in options. Must be a file upload DOM element';
|
|
||||||
}
|
|
||||||
|
|
||||||
if (typeof this.options.onFileLoad !== 'function') {
|
|
||||||
throw 'Invalid onFileLoad param in options. Must be a function';
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
this._verifyDependencies = function() {
|
|
||||||
if (!window.BinaryString) throw 'BinaryString is missing. Check that you\'ve correctly included it';
|
|
||||||
}
|
|
||||||
|
|
||||||
// helper function for binding methods to objects
|
|
||||||
this._bind = function(object, method) {
|
|
||||||
return function() {return method.apply(object, arguments);};
|
|
||||||
}
|
|
||||||
|
|
||||||
this._init(o);
|
|
||||||
}
|
|
||||||
@ -1,168 +0,0 @@
|
|||||||
function BinaryString(source) {
|
|
||||||
this._source = null;
|
|
||||||
this._bytes = [];
|
|
||||||
this._pos = 0;
|
|
||||||
this._length = 0;
|
|
||||||
|
|
||||||
this._init = function(source) {
|
|
||||||
this._source = source;
|
|
||||||
this._bytes = this._stringToBytes(this._source);
|
|
||||||
this._length = this._bytes.length;
|
|
||||||
}
|
|
||||||
|
|
||||||
this.current = function() {return this._pos;}
|
|
||||||
|
|
||||||
this.rewind = function() {return this.jump(0);}
|
|
||||||
this.end = function() {return this.jump(this.length() - 1);}
|
|
||||||
this.next = function() {return this.jump(this.current() + 1);}
|
|
||||||
this.prev = function() {return this.jump(this.current() - 1);}
|
|
||||||
|
|
||||||
this.jump = function(pos) {
|
|
||||||
if (pos < 0 || pos >= this.length()) return false;
|
|
||||||
|
|
||||||
this._pos = pos;
|
|
||||||
return true;
|
|
||||||
}
|
|
||||||
|
|
||||||
this.readByte = function(pos) {
|
|
||||||
pos = (typeof pos == 'number') ? pos : this.current();
|
|
||||||
return this.readBytes(1, pos)[0];
|
|
||||||
}
|
|
||||||
|
|
||||||
this.readBytes = function(length, pos) {
|
|
||||||
length = length || 1;
|
|
||||||
pos = (typeof pos == 'number') ? pos : this.current();
|
|
||||||
|
|
||||||
if (pos > this.length() ||
|
|
||||||
pos < 0 ||
|
|
||||||
length <= 0 ||
|
|
||||||
pos + length > this.length() ||
|
|
||||||
pos + length < 0
|
|
||||||
) {
|
|
||||||
return false;
|
|
||||||
}
|
|
||||||
|
|
||||||
var bytes = [];
|
|
||||||
|
|
||||||
for (var i = pos; i < pos + length; i++) {
|
|
||||||
bytes.push(this._bytes[i]);
|
|
||||||
}
|
|
||||||
|
|
||||||
return bytes;
|
|
||||||
}
|
|
||||||
|
|
||||||
this.length = function() {return this._length;}
|
|
||||||
|
|
||||||
this.toString = function() {
|
|
||||||
var string = '',
|
|
||||||
length = this.length();
|
|
||||||
|
|
||||||
for (var i = 0; i < length; i++) {
|
|
||||||
string += String.fromCharCode(this.readByte(i));
|
|
||||||
}
|
|
||||||
|
|
||||||
return string;
|
|
||||||
}
|
|
||||||
|
|
||||||
this.toUtf8 = function() {
|
|
||||||
var inc = 0,
|
|
||||||
string = '',
|
|
||||||
length = this.length();
|
|
||||||
|
|
||||||
// determine if first 3 characters are the BOM
|
|
||||||
// then skip them in output if so
|
|
||||||
if (length >= 3 &&
|
|
||||||
this.readByte(0) === 0xEF &&
|
|
||||||
this.readByte(1) === 0xBB &&
|
|
||||||
this.readByte(2) === 0xBF
|
|
||||||
) {
|
|
||||||
inc = 3;
|
|
||||||
}
|
|
||||||
|
|
||||||
for (; inc < length; inc++) {
|
|
||||||
var byte1 = this.readByte(inc),
|
|
||||||
byte2 = 0,
|
|
||||||
byte3 = 0,
|
|
||||||
byte4 = 0,
|
|
||||||
code1 = 0,
|
|
||||||
code2 = 0,
|
|
||||||
point = 0;
|
|
||||||
|
|
||||||
switch (true) {
|
|
||||||
// single byte character; same as ascii
|
|
||||||
case (byte1 < 0x80):
|
|
||||||
code1 = byte1;
|
|
||||||
break;
|
|
||||||
|
|
||||||
// 2 byte character
|
|
||||||
case (byte1 >= 0xC2 && byte1 < 0xE0):
|
|
||||||
byte2 = this.readByte(++inc);
|
|
||||||
|
|
||||||
code1 = ((byte1 & 0x1F) << 6) +
|
|
||||||
(byte2 & 0x3F);
|
|
||||||
break;
|
|
||||||
|
|
||||||
// 3 byte character
|
|
||||||
case (byte1 >= 0xE0 && byte1 < 0xF0):
|
|
||||||
byte2 = this.readByte(++inc);
|
|
||||||
byte3 = this.readByte(++inc);
|
|
||||||
|
|
||||||
code1 = ((byte1 & 0xFF) << 12) +
|
|
||||||
((byte2 & 0x3F) << 6) +
|
|
||||||
(byte3 & 0x3F);
|
|
||||||
break;
|
|
||||||
|
|
||||||
// 4 byte character
|
|
||||||
case (byte1 >= 0xF0 && byte1 < 0xF5):
|
|
||||||
byte2 = this.readByte(++inc);
|
|
||||||
byte3 = this.readByte(++inc);
|
|
||||||
byte4 = this.readByte(++inc);
|
|
||||||
|
|
||||||
point = ((byte1 & 0x07) << 18) +
|
|
||||||
((byte2 & 0x3F) << 12) +
|
|
||||||
((byte3 & 0x3F) << 6) +
|
|
||||||
(byte4 & 0x3F)
|
|
||||||
point -= 0x10000;
|
|
||||||
|
|
||||||
code1 = (point >> 10) + 0xD800;
|
|
||||||
code2 = (point & 0x3FF) + 0xDC00;
|
|
||||||
break;
|
|
||||||
|
|
||||||
default:
|
|
||||||
throw 'Invalid byte ' + this._byteToString(byte1) + ' whilst converting to UTF-8';
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
|
|
||||||
string += (code2) ? String.fromCharCode(code1, code2)
|
|
||||||
: String.fromCharCode(code1);
|
|
||||||
}
|
|
||||||
|
|
||||||
return string;
|
|
||||||
}
|
|
||||||
|
|
||||||
this.toArray = function() {return this.readBytes(this.length() - 1, 0);}
|
|
||||||
|
|
||||||
|
|
||||||
this._stringToBytes = function(str) {
|
|
||||||
var bytes = [],
|
|
||||||
chr = 0;
|
|
||||||
|
|
||||||
for (var i = 0; i < str.length; i++) {
|
|
||||||
chr = str.charCodeAt(i);
|
|
||||||
bytes.push(chr & 0xFF);
|
|
||||||
}
|
|
||||||
|
|
||||||
return bytes;
|
|
||||||
}
|
|
||||||
|
|
||||||
this._byteToString = function(byte) {
|
|
||||||
var asString = byte.toString(16).toUpperCase();
|
|
||||||
while (asString.length < 2) {
|
|
||||||
asString = '0' + asString;
|
|
||||||
}
|
|
||||||
|
|
||||||
return '0x' + asString;
|
|
||||||
}
|
|
||||||
|
|
||||||
this._init(source);
|
|
||||||
}
|
|
||||||
File diff suppressed because it is too large
Load Diff
@ -1,524 +0,0 @@
|
|||||||
/*!
|
|
||||||
jCanvas v2.2.1
|
|
||||||
Caleb Evans
|
|
||||||
2.2.1 revisions by Thinkyhead
|
|
||||||
*/
|
|
||||||
|
|
||||||
(function($, document, Math, Number, undefined) {
|
|
||||||
|
|
||||||
// jC global object
|
|
||||||
var jC = {};
|
|
||||||
jC.originals = {
|
|
||||||
width: 20,
|
|
||||||
height: 20,
|
|
||||||
cornerRadius: 0,
|
|
||||||
fillStyle: 'transparent',
|
|
||||||
strokeStyle: 'transparent',
|
|
||||||
strokeWidth: 5,
|
|
||||||
strokeCap: 'butt',
|
|
||||||
strokeJoin: 'miter',
|
|
||||||
shadowX: 0,
|
|
||||||
shadowY: 0,
|
|
||||||
shadowBlur: 10,
|
|
||||||
shadowColor: 'transparent',
|
|
||||||
x: 0, y: 0,
|
|
||||||
x1: 0, y1: 0,
|
|
||||||
radius: 10,
|
|
||||||
start: 0,
|
|
||||||
end: 360,
|
|
||||||
ccw: false,
|
|
||||||
inDegrees: true,
|
|
||||||
fromCenter: true,
|
|
||||||
closed: false,
|
|
||||||
sides: 3,
|
|
||||||
angle: 0,
|
|
||||||
text: '',
|
|
||||||
font: 'normal 12pt sans-serif',
|
|
||||||
align: 'center',
|
|
||||||
baseline: 'middle',
|
|
||||||
source: '',
|
|
||||||
repeat: 'repeat'
|
|
||||||
};
|
|
||||||
// Duplicate original defaults
|
|
||||||
jC.defaults = $.extend({}, jC.originals);
|
|
||||||
|
|
||||||
// Set global properties
|
|
||||||
function setGlobals(context, map) {
|
|
||||||
context.fillStyle = map.fillStyle;
|
|
||||||
context.strokeStyle = map.strokeStyle;
|
|
||||||
context.lineWidth = map.strokeWidth;
|
|
||||||
context.lineCap = map.strokeCap;
|
|
||||||
context.lineJoin = map.strokeJoin;
|
|
||||||
context.shadowOffsetX = map.shadowX;
|
|
||||||
context.shadowOffsetY = map.shadowY;
|
|
||||||
context.shadowBlur = map.shadowBlur;
|
|
||||||
context.shadowColor = map.shadowColor;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Close path if chosen
|
|
||||||
function closePath(context, map) {
|
|
||||||
if (map.closed === true) {
|
|
||||||
context.closePath();
|
|
||||||
context.fill();
|
|
||||||
context.stroke();
|
|
||||||
} else {
|
|
||||||
context.fill();
|
|
||||||
context.stroke();
|
|
||||||
context.closePath();
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
// Measure angles in degrees if chosen
|
|
||||||
function checkUnits(map) {
|
|
||||||
if (map.inDegrees === true) {
|
|
||||||
return Math.PI / 180;
|
|
||||||
} else {
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
// Set canvas defaults
|
|
||||||
$.fn.canvas = function(args) {
|
|
||||||
// Reset defaults if no value is passed
|
|
||||||
if (typeof args === 'undefined') {
|
|
||||||
jC.defaults = jC.originals;
|
|
||||||
} else {
|
|
||||||
jC.defaults = $.extend({}, jC.defaults, args);
|
|
||||||
}
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Load canvas
|
|
||||||
$.fn.loadCanvas = function(context) {
|
|
||||||
if (typeof context === 'undefined') {context = '2d';}
|
|
||||||
return this[0].getContext(context);
|
|
||||||
};
|
|
||||||
|
|
||||||
// Create gradient
|
|
||||||
$.fn.gradient = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
// Specify custom defaults
|
|
||||||
gDefaults = {
|
|
||||||
x1: 0, y1: 0,
|
|
||||||
x2: 0, y2: 0,
|
|
||||||
r1: 10, r2: 100
|
|
||||||
},
|
|
||||||
params = $.extend({}, gDefaults, args),
|
|
||||||
gradient, stops = 0, percent, i;
|
|
||||||
|
|
||||||
// Create radial gradient if chosen
|
|
||||||
if (typeof args.r1 === 'undefined' && typeof args.r2 === 'undefined') {
|
|
||||||
gradient = ctx.createLinearGradient(params.x1, params.y1, params.x2, params.y2);
|
|
||||||
} else {
|
|
||||||
gradient = ctx.createRadialGradient(params.x1, params.y1, params.r1, params.x2, params.y2, params.r2);
|
|
||||||
}
|
|
||||||
|
|
||||||
// Count number of color stops
|
|
||||||
for (i=1; i<=Number.MAX_VALUE; i+=1) {
|
|
||||||
if (params['c' + i]) {
|
|
||||||
stops += 1;
|
|
||||||
} else {
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
// Calculate color stop percentages if absent
|
|
||||||
for (i=1; i<=stops; i+=1) {
|
|
||||||
percent = Math.round((100 / (stops-1)) * (i-1)) / 100;
|
|
||||||
if (typeof params['s' + i] === 'undefined') {
|
|
||||||
params['s' + i] = percent;
|
|
||||||
}
|
|
||||||
gradient.addColorStop(params['s' + i], params['c' + i]);
|
|
||||||
}
|
|
||||||
return gradient;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Create pattern
|
|
||||||
$.fn.pattern = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args),
|
|
||||||
pattern,
|
|
||||||
img = document.createElement('img');
|
|
||||||
img.src = params.source;
|
|
||||||
|
|
||||||
// Create pattern
|
|
||||||
function create() {
|
|
||||||
if (img.complete === true) {
|
|
||||||
// Create pattern
|
|
||||||
pattern = ctx.createPattern(img, params.repeat);
|
|
||||||
} else {
|
|
||||||
throw "The pattern has not loaded yet";
|
|
||||||
}
|
|
||||||
}
|
|
||||||
try {
|
|
||||||
create();
|
|
||||||
} catch(error) {
|
|
||||||
img.onload = create;
|
|
||||||
}
|
|
||||||
return pattern;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Clear canvas
|
|
||||||
$.fn.clearCanvas = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args);
|
|
||||||
|
|
||||||
// Draw from center if chosen
|
|
||||||
if (params.fromCenter === true) {
|
|
||||||
params.x -= params.width / 2;
|
|
||||||
params.y -= params.height / 2;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Clear entire canvas if chosen
|
|
||||||
ctx.beginPath();
|
|
||||||
if (typeof args === 'undefined') {
|
|
||||||
ctx.clearRect(0, 0, this.width(), this.height());
|
|
||||||
} else {
|
|
||||||
ctx.clearRect(params.x, params.y, params.width, params.height);
|
|
||||||
}
|
|
||||||
ctx.closePath();
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Save canvas
|
|
||||||
$.fn.saveCanvas = function() {
|
|
||||||
var ctx = this.loadCanvas();
|
|
||||||
ctx.save();
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Restore canvas
|
|
||||||
$.fn.restoreCanvas = function() {
|
|
||||||
var ctx = this.loadCanvas();
|
|
||||||
ctx.restore();
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Scale canvas
|
|
||||||
$.fn.scaleCanvas = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args);
|
|
||||||
ctx.save();
|
|
||||||
ctx.translate(params.x, params.y);
|
|
||||||
ctx.scale(params.width, params.height);
|
|
||||||
ctx.translate(-params.x, -params.y)
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Translate canvas
|
|
||||||
$.fn.translateCanvas = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args);
|
|
||||||
ctx.save();
|
|
||||||
ctx.translate(params.x, params.y);
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Rotate canvas
|
|
||||||
$.fn.rotateCanvas = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args),
|
|
||||||
toRad = checkUnits(params);
|
|
||||||
|
|
||||||
ctx.save();
|
|
||||||
ctx.translate(params.x, params.y);
|
|
||||||
ctx.rotate(params.angle * toRad);
|
|
||||||
ctx.translate(-params.x, -params.y);
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Draw rectangle
|
|
||||||
$.fn.drawRect = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args),
|
|
||||||
toRad = checkUnits(params),
|
|
||||||
x1, y1, x2, y2, r;
|
|
||||||
setGlobals(ctx, params);
|
|
||||||
|
|
||||||
// Draw from center if chosen
|
|
||||||
if (params.fromCenter === true) {
|
|
||||||
params.x -= params.width / 2;
|
|
||||||
params.y -= params.height / 2;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Draw rounded rectangle if chosen
|
|
||||||
if (params.cornerRadius > 0) {
|
|
||||||
x1 = params.x;
|
|
||||||
y1 = params.y;
|
|
||||||
x2 = params.x + params.width;
|
|
||||||
y2 = params.y + params.height;
|
|
||||||
r = params.cornerRadius;
|
|
||||||
if ((x2 - x1) - (2 * r) < 0) {
|
|
||||||
r = (x2 - x1) / 2;
|
|
||||||
}
|
|
||||||
if ((y2 - y1) - (2 * r) < 0) {
|
|
||||||
r = (y2 - y1) / 2;
|
|
||||||
}
|
|
||||||
ctx.beginPath();
|
|
||||||
ctx.moveTo(x1+r,y1);
|
|
||||||
ctx.lineTo(x2-r,y1);
|
|
||||||
ctx.arc(x2-r, y1+r, r, 270*toRad, 360*toRad, false);
|
|
||||||
ctx.lineTo(x2,y2-r);
|
|
||||||
ctx.arc(x2-r, y2-r, r, 0, 90*toRad, false);
|
|
||||||
ctx.lineTo(x1+r,y2);
|
|
||||||
ctx.arc(x1+r, y2-r, r, 90*toRad, 180*toRad, false);
|
|
||||||
ctx.lineTo(x1,y1+r);
|
|
||||||
ctx.arc(x1+r, y1+r, r, 180*toRad, 270*toRad, false);
|
|
||||||
ctx.fill();
|
|
||||||
ctx.stroke();
|
|
||||||
ctx.closePath();
|
|
||||||
} else {
|
|
||||||
ctx.fillRect(params.x, params.y, params.width, params.height);
|
|
||||||
ctx.strokeRect(params.x, params.y, params.width, params.height);
|
|
||||||
}
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Draw arc
|
|
||||||
$.fn.drawArc = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args),
|
|
||||||
toRad = checkUnits(params);
|
|
||||||
setGlobals(ctx, params);
|
|
||||||
|
|
||||||
// Draw from center if chosen
|
|
||||||
if (params.fromCenter === false) {
|
|
||||||
params.x += params.radius;
|
|
||||||
params.y += params.radius;
|
|
||||||
}
|
|
||||||
|
|
||||||
ctx.beginPath();
|
|
||||||
ctx.arc(params.x, params.y, params.radius, (params.start*toRad)-(Math.PI/2), (params.end*toRad)-(Math.PI/2), params.ccw);
|
|
||||||
// Close path if chosen
|
|
||||||
closePath(ctx, params);
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Draw ellipse
|
|
||||||
$.fn.drawEllipse = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args),
|
|
||||||
controlW = params.width * (4/3);
|
|
||||||
setGlobals(ctx, params);
|
|
||||||
|
|
||||||
// Draw from center if chosen
|
|
||||||
if (params.fromCenter === false) {
|
|
||||||
params.x += params.width / 2;
|
|
||||||
params.y += params.height / 2;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Increment coordinates to prevent negative values
|
|
||||||
params.x += 1e-10;
|
|
||||||
params.y += 1e-10;
|
|
||||||
|
|
||||||
// Create ellipse
|
|
||||||
ctx.beginPath();
|
|
||||||
ctx.moveTo(params.x, params.y-params.height/2);
|
|
||||||
ctx.bezierCurveTo(params.x-controlW/2,params.y-params.height/2,
|
|
||||||
params.x-controlW/2,params.y+params.height/2,
|
|
||||||
params.x,params.y+params.height/2);
|
|
||||||
ctx.bezierCurveTo(params.x+controlW/2,params.y+params.height/2,
|
|
||||||
params.x+controlW/2,params.y-params.height/2,
|
|
||||||
params.x,params.y-params.height/2);
|
|
||||||
ctx.closePath();
|
|
||||||
ctx.fill();
|
|
||||||
ctx.stroke();
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Draw line
|
|
||||||
$.fn.drawLine = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args),
|
|
||||||
max = Number.MAX_VALUE, l,
|
|
||||||
lx, ly;
|
|
||||||
setGlobals(ctx, params);
|
|
||||||
|
|
||||||
// Draw each point
|
|
||||||
ctx.beginPath();
|
|
||||||
ctx.moveTo(params.x1, params.y1);
|
|
||||||
for (l=2; l<max; l+=1) {
|
|
||||||
lx = params['x' + l];
|
|
||||||
ly = params['y' + l];
|
|
||||||
// Stop loop when all points are drawn
|
|
||||||
if (typeof lx === 'undefined' || typeof ly === 'undefined') {
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
ctx.lineTo(lx, ly);
|
|
||||||
}
|
|
||||||
// Close path if chosen
|
|
||||||
closePath(ctx, params);
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Draw quadratic curve
|
|
||||||
$.fn.drawQuad = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args),
|
|
||||||
max = Number.MAX_VALUE, l,
|
|
||||||
lx, ly, lcx, lcy;
|
|
||||||
setGlobals(ctx, params);
|
|
||||||
|
|
||||||
// Draw each point
|
|
||||||
ctx.beginPath();
|
|
||||||
ctx.moveTo(params.x1, params.y1);
|
|
||||||
for (l=2; l<max; l+=1) {
|
|
||||||
lx = params['x' + l];
|
|
||||||
if (typeof lx === 'undefined') break;
|
|
||||||
ly = params['y' + l];
|
|
||||||
if (typeof ly === 'undefined') break;
|
|
||||||
lcx = params['cx' + (l-1)];
|
|
||||||
if (typeof lcx === 'undefined') break;
|
|
||||||
lcy = params['cy' + (l-1)];
|
|
||||||
if (typeof lcy === 'undefined') break;
|
|
||||||
ctx.quadraticCurveTo(lcx, lcy, lx, ly);
|
|
||||||
}
|
|
||||||
// Close path if chosen
|
|
||||||
closePath(ctx, params);
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Draw Bezier curve
|
|
||||||
$.fn.drawBezier = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args),
|
|
||||||
max = Number.MAX_VALUE,
|
|
||||||
l=2, lc=1, lx, ly, lcx1, lcy1, lcx2, lcy2, i;
|
|
||||||
setGlobals(ctx, params);
|
|
||||||
|
|
||||||
// Draw each point
|
|
||||||
ctx.beginPath();
|
|
||||||
ctx.moveTo(params.x1, params.y1);
|
|
||||||
for (i=2; i<max; i+=1) {
|
|
||||||
lx = params['x' + l];
|
|
||||||
if (typeof lx === 'undefined') break;
|
|
||||||
ly = params['y' + l];
|
|
||||||
if (typeof ly === 'undefined') break;
|
|
||||||
lcx1 = params['cx' + lc];
|
|
||||||
if (typeof lcx1 === 'undefined') break;
|
|
||||||
lcy1 = params['cy' + lc];
|
|
||||||
if (typeof lcy1 === 'undefined') break;
|
|
||||||
lcx2 = params['cx' + (lc+1)];
|
|
||||||
if (typeof lcx2 === 'undefined') break;
|
|
||||||
lcy2 = params['cy' + (lc+1)];
|
|
||||||
if (typeof lcy2 === 'undefined') break;
|
|
||||||
ctx.bezierCurveTo(lcx1, lcy1, lcx2, lcy2, lx, ly);
|
|
||||||
l += 1;
|
|
||||||
lc += 2;
|
|
||||||
}
|
|
||||||
// Close path if chosen
|
|
||||||
closePath(ctx, params);
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Draw text
|
|
||||||
$.fn.drawText = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args);
|
|
||||||
setGlobals(ctx, params);
|
|
||||||
|
|
||||||
// Set text-specific properties
|
|
||||||
ctx.textBaseline = params.baseline;
|
|
||||||
ctx.textAlign = params.align;
|
|
||||||
ctx.font = params.font;
|
|
||||||
|
|
||||||
ctx.strokeText(params.text, params.x, params.y);
|
|
||||||
ctx.fillText(params.text, params.x, params.y);
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Draw image
|
|
||||||
$.fn.drawImage = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args),
|
|
||||||
// Define image source
|
|
||||||
img = document.createElement('img');
|
|
||||||
img.src = params.source;
|
|
||||||
setGlobals(ctx, params);
|
|
||||||
|
|
||||||
// Draw image function
|
|
||||||
function draw() {
|
|
||||||
if (img.complete) {
|
|
||||||
|
|
||||||
var scaleFac = img.width / img.height;
|
|
||||||
|
|
||||||
// If width/height are specified
|
|
||||||
if (typeof args.width !== 'undefined' && typeof args.height !== 'undefined') {
|
|
||||||
img.width = args.width;
|
|
||||||
img.height = args.height;
|
|
||||||
// If width is specified
|
|
||||||
} else if (typeof args.width !== 'undefined' && typeof args.height === 'undefined') {
|
|
||||||
img.width = args.width;
|
|
||||||
img.height = img.width / scaleFac;
|
|
||||||
// If height is specified
|
|
||||||
} else if (typeof args.width === 'undefined' && typeof args.height !== 'undefined') {
|
|
||||||
img.height = args.height;
|
|
||||||
img.width = img.height * scaleFac;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Draw from center if chosen
|
|
||||||
if (params.fromCenter === true) {
|
|
||||||
params.x -= img.width / 2;
|
|
||||||
params.y -= img.height / 2;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Draw image
|
|
||||||
ctx.drawImage(img, params.x, params.y, img.width, img.height);
|
|
||||||
} else {
|
|
||||||
throw "The image has not loaded yet.";
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
function dodraw() {
|
|
||||||
// console.log("dodraw...");
|
|
||||||
try {
|
|
||||||
// console.log("dodraw...try...");
|
|
||||||
draw();
|
|
||||||
}
|
|
||||||
catch(error) {
|
|
||||||
// console.log("dodraw...catch: " + error);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
// Draw image if already loaded
|
|
||||||
// console.log("--------------------");
|
|
||||||
// console.log("drawImage " + img.src);
|
|
||||||
try {
|
|
||||||
// console.log("try...");
|
|
||||||
draw();
|
|
||||||
} catch(error) {
|
|
||||||
// console.log("catch: " + error);
|
|
||||||
img.onload = dodraw;
|
|
||||||
}
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
// Draw polygon
|
|
||||||
$.fn.drawPolygon = function(args) {
|
|
||||||
var ctx = this.loadCanvas(),
|
|
||||||
params = $.extend({}, jC.defaults, args),
|
|
||||||
theta, dtheta, x, y,
|
|
||||||
toRad = checkUnits(params), i;
|
|
||||||
setGlobals(ctx, params);
|
|
||||||
|
|
||||||
if (params.sides >= 3) {
|
|
||||||
// Calculate points and draw
|
|
||||||
theta = (Math.PI/2) + (Math.PI/params.sides) + (params.angle*toRad);
|
|
||||||
dtheta = (Math.PI*2) / params.sides;
|
|
||||||
for (i=0; i<params.sides; i+=1) {
|
|
||||||
x = params.x + (params.radius * Math.cos(theta)) + 1e-10;
|
|
||||||
y = params.y + (params.radius * Math.sin(theta)) + 1e-10;
|
|
||||||
if (params.fromCenter === false) {
|
|
||||||
x += params.radius;
|
|
||||||
y += params.radius;
|
|
||||||
}
|
|
||||||
ctx.lineTo(x, y);
|
|
||||||
theta += dtheta;
|
|
||||||
}
|
|
||||||
closePath(ctx, params);
|
|
||||||
}
|
|
||||||
return this;
|
|
||||||
};
|
|
||||||
|
|
||||||
return window.jCanvas = jC;
|
|
||||||
}(jQuery, document, Math, Number));
|
|
||||||
File diff suppressed because one or more lines are too long
File diff suppressed because one or more lines are too long
@ -0,0 +1,138 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter
|
||||||
|
*
|
||||||
|
* For implementation details, please take a look at the datasheet:
|
||||||
|
* http://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
|
||||||
|
*
|
||||||
|
* For discussion and feedback, please go to:
|
||||||
|
* http://arduino.cc/forum/index.php/topic,51842.0.html
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "dac_mcp4728.h"
|
||||||
|
|
||||||
|
#if ENABLED(DAC_STEPPER_CURRENT)
|
||||||
|
|
||||||
|
uint16_t mcp4728_values[4];
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Begin I2C, get current values (input register and eeprom) of mcp4728
|
||||||
|
*/
|
||||||
|
void mcp4728_init() {
|
||||||
|
Wire.begin();
|
||||||
|
Wire.requestFrom(int(DAC_DEV_ADDRESS), 24);
|
||||||
|
while(Wire.available()) {
|
||||||
|
int deviceID = Wire.receive();
|
||||||
|
int hiByte = Wire.receive();
|
||||||
|
int loByte = Wire.receive();
|
||||||
|
|
||||||
|
int isEEPROM = (deviceID & 0B00001000) >> 3;
|
||||||
|
int channel = (deviceID & 0B00110000) >> 4;
|
||||||
|
if (isEEPROM != 1) {
|
||||||
|
mcp4728_values[channel] = word((hiByte & 0B00001111), loByte);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Write input resister value to specified channel using fastwrite method.
|
||||||
|
* Channel : 0-3, Values : 0-4095
|
||||||
|
*/
|
||||||
|
uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value) {
|
||||||
|
mcp4728_values[channel] = value;
|
||||||
|
return mcp4728_fastWrite();
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
* Write all input resistor values to EEPROM using SequencialWrite method.
|
||||||
|
* This will update both input register and EEPROM value
|
||||||
|
* This will also write current Vref, PowerDown, Gain settings to EEPROM
|
||||||
|
*/
|
||||||
|
uint8_t mcp4728_eepromWrite() {
|
||||||
|
Wire.beginTransmission(DAC_DEV_ADDRESS);
|
||||||
|
Wire.send(SEQWRITE);
|
||||||
|
for (uint8_t channel=0; channel <= 3; channel++) {
|
||||||
|
Wire.send(DAC_STEPPER_VREF << 7 | 0 << 5 | DAC_STEPPER_GAIN << 4 | highByte(mcp4728_values[channel]));
|
||||||
|
Wire.send(lowByte(mcp4728_values[channel]));
|
||||||
|
}
|
||||||
|
return Wire.endTransmission();
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Write Voltage reference setting to all input regiters
|
||||||
|
*/
|
||||||
|
uint8_t mcp4728_setVref_all(uint8_t value) {
|
||||||
|
Wire.beginTransmission(DAC_DEV_ADDRESS);
|
||||||
|
Wire.send(VREFWRITE | value << 3 | value << 2 | value << 1 | value);
|
||||||
|
return Wire.endTransmission();
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
* Write Gain setting to all input regiters
|
||||||
|
*/
|
||||||
|
uint8_t mcp4728_setGain_all(uint8_t value) {
|
||||||
|
Wire.beginTransmission(DAC_DEV_ADDRESS);
|
||||||
|
Wire.send(GAINWRITE | value << 3 | value << 2 | value << 1 | value);
|
||||||
|
return Wire.endTransmission();
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Return Input Regiter value
|
||||||
|
*/
|
||||||
|
uint16_t mcp4728_getValue(uint8_t channel) { return mcp4728_values[channel]; }
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Steph: Might be useful in the future
|
||||||
|
* Return Vout
|
||||||
|
*
|
||||||
|
uint16_t mcp4728_getVout(uint8_t channel) {
|
||||||
|
uint32_t vref = 2048;
|
||||||
|
uint32_t vOut = (vref * mcp4728_values[channel] * (_DAC_STEPPER_GAIN + 1)) / 4096;
|
||||||
|
if (vOut > defaultVDD) vOut = defaultVDD;
|
||||||
|
return vOut;
|
||||||
|
}
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* FastWrite input register values - All DAC ouput update. refer to DATASHEET 5.6.1
|
||||||
|
* DAC Input and PowerDown bits update.
|
||||||
|
* No EEPROM update
|
||||||
|
*/
|
||||||
|
uint8_t mcp4728_fastWrite() {
|
||||||
|
Wire.beginTransmission(DAC_DEV_ADDRESS);
|
||||||
|
for (uint8_t channel=0; channel <= 3; channel++) {
|
||||||
|
Wire.send(highByte(mcp4728_values[channel]));
|
||||||
|
Wire.send(lowByte(mcp4728_values[channel]));
|
||||||
|
}
|
||||||
|
return Wire.endTransmission();
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Common function for simple general commands
|
||||||
|
*/
|
||||||
|
uint8_t mcp4728_simpleCommand(byte simpleCommand) {
|
||||||
|
Wire.beginTransmission(GENERALCALL);
|
||||||
|
Wire.send(simpleCommand);
|
||||||
|
return Wire.endTransmission();
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // DAC_STEPPER_CURRENT
|
||||||
@ -0,0 +1,66 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Arduino library for MicroChip MCP4728 I2C D/A converter.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef mcp4728_h
|
||||||
|
#define mcp4728_h
|
||||||
|
|
||||||
|
#include "Configuration.h"
|
||||||
|
#include "Configuration_adv.h"
|
||||||
|
|
||||||
|
#if ENABLED(DAC_STEPPER_CURRENT)
|
||||||
|
#include "WProgram.h"
|
||||||
|
#include "Wire.h"
|
||||||
|
//#include <Wire.h>
|
||||||
|
|
||||||
|
#define defaultVDD 5000
|
||||||
|
#define BASE_ADDR 0x60
|
||||||
|
#define RESET 0B00000110
|
||||||
|
#define WAKE 0B00001001
|
||||||
|
#define UPDATE 0B00001000
|
||||||
|
#define MULTIWRITE 0B01000000
|
||||||
|
#define SINGLEWRITE 0B01011000
|
||||||
|
#define SEQWRITE 0B01010000
|
||||||
|
#define VREFWRITE 0B10000000
|
||||||
|
#define GAINWRITE 0B11000000
|
||||||
|
#define POWERDOWNWRITE 0B10100000
|
||||||
|
#define GENERALCALL 0B0000000
|
||||||
|
#define GAINWRITE 0B11000000
|
||||||
|
|
||||||
|
// This is taken from the original lib, makes it easy to edit if needed
|
||||||
|
#define DAC_DEV_ADDRESS (BASE_ADDR | 0x00)
|
||||||
|
|
||||||
|
void mcp4728_init();
|
||||||
|
uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value);
|
||||||
|
uint8_t mcp4728_eepromWrite();
|
||||||
|
uint8_t mcp4728_setVref_all(uint8_t value);
|
||||||
|
uint8_t mcp4728_setGain_all(uint8_t value);
|
||||||
|
uint16_t mcp4728_getValue(uint8_t channel);
|
||||||
|
uint8_t mcp4728_fastWrite();
|
||||||
|
uint8_t mcp4728_simpleCommand(byte simpleCommand);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
@ -0,0 +1,659 @@
|
|||||||
|
/**
|
||||||
|
* Marlin 3D Printer Firmware
|
||||||
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||||
|
*
|
||||||
|
* Based on Sprinter and grbl.
|
||||||
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 3 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Configuration_adv.h
|
||||||
|
*
|
||||||
|
* Advanced settings.
|
||||||
|
* Only change these if you know exactly what you're doing.
|
||||||
|
* Some of these settings can damage your printer if improperly set!
|
||||||
|
*
|
||||||
|
* Basic settings can be found in Configuration.h
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#ifndef CONFIGURATION_ADV_H
|
||||||
|
#define CONFIGURATION_ADV_H
|
||||||
|
|
||||||
|
#include "Conditionals.h"
|
||||||
|
|
||||||
|
// @section temperature
|
||||||
|
|
||||||
|
//===========================================================================
|
||||||
|
//=============================Thermal Settings ============================
|
||||||
|
//===========================================================================
|
||||||
|
|
||||||
|
#if DISABLED(PIDTEMPBED)
|
||||||
|
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
|
||||||
|
#if ENABLED(BED_LIMIT_SWITCHING)
|
||||||
|
#define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Thermal Protection protects your printer from damage and fire if a
|
||||||
|
* thermistor falls out or temperature sensors fail in any way.
|
||||||
|
*
|
||||||
|
* The issue: If a thermistor falls out or a temperature sensor fails,
|
||||||
|
* Marlin can no longer sense the actual temperature. Since a disconnected
|
||||||
|
* thermistor reads as a low temperature, the firmware will keep the heater on.
|
||||||
|
*
|
||||||
|
* The solution: Once the temperature reaches the target, start observing.
|
||||||
|
* If the temperature stays too far below the target (hysteresis) for too long (period),
|
||||||
|
* the firmware will halt the machine as a safety precaution.
|
||||||
|
*
|
||||||
|
* If you get false positives for "Thermal Runaway" increase THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
|
||||||
|
*/
|
||||||
|
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||||
|
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
|
||||||
|
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Whenever an M104 or M109 increases the target temperature the firmware will wait for the
|
||||||
|
* WATCH_TEMP_PERIOD to expire, and if the temperature hasn't increased by WATCH_TEMP_INCREASE
|
||||||
|
* degrees, the machine is halted, requiring a hard reset. This test restarts with any M104/M109,
|
||||||
|
* but only if the current temperature is far enough below the target for a reliable test.
|
||||||
|
*
|
||||||
|
* If you get false positives for "Heating failed" increase WATCH_TEMP_PERIOD and/or decrease WATCH_TEMP_INCREASE
|
||||||
|
* WATCH_TEMP_INCREASE should not be below 2.
|
||||||
|
*/
|
||||||
|
#define WATCH_TEMP_PERIOD 20 // Seconds
|
||||||
|
#define WATCH_TEMP_INCREASE 2 // Degrees Celsius
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Thermal Protection parameters for the bed
|
||||||
|
* are like the above for the hotends.
|
||||||
|
* WATCH_TEMP_BED_PERIOD and WATCH_TEMP_BED_INCREASE are not imlemented now.
|
||||||
|
*/
|
||||||
|
#if ENABLED(THERMAL_PROTECTION_BED)
|
||||||
|
#define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
|
||||||
|
#define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ENABLED(PIDTEMP)
|
||||||
|
// this adds an experimental additional term to the heating power, proportional to the extrusion speed.
|
||||||
|
// if Kc is chosen well, the additional required power due to increased melting should be compensated.
|
||||||
|
#define PID_ADD_EXTRUSION_RATE
|
||||||
|
#if ENABLED(PID_ADD_EXTRUSION_RATE)
|
||||||
|
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
|
||||||
|
#define LPQ_MAX_LEN 50
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Automatic Temperature:
|
||||||
|
* The hotend target temperature is calculated by all the buffered lines of gcode.
|
||||||
|
* The maximum buffered steps/sec of the extruder motor is called "se".
|
||||||
|
* Start autotemp mode with M109 S<mintemp> B<maxtemp> F<factor>
|
||||||
|
* The target temperature is set to mintemp+factor*se[steps/sec] and is limited by
|
||||||
|
* mintemp and maxtemp. Turn this off by executing M109 without F*
|
||||||
|
* Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp.
|
||||||
|
* On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
|
||||||
|
*/
|
||||||
|
#define AUTOTEMP
|
||||||
|
#if ENABLED(AUTOTEMP)
|
||||||
|
#define AUTOTEMP_OLDWEIGHT 0.98
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//Show Temperature ADC value
|
||||||
|
//The M105 command return, besides traditional information, the ADC value read from temperature sensors.
|
||||||
|
//#define SHOW_TEMP_ADC_VALUES
|
||||||
|
|
||||||
|
// @section extruder
|
||||||
|
|
||||||
|
// extruder run-out prevention.
|
||||||
|
//if the machine is idle, and the temperature over MINTEMP, every couple of SECONDS some filament is extruded
|
||||||
|
//#define EXTRUDER_RUNOUT_PREVENT
|
||||||
|
#define EXTRUDER_RUNOUT_MINTEMP 190
|
||||||
|
#define EXTRUDER_RUNOUT_SECONDS 30.
|
||||||
|
#define EXTRUDER_RUNOUT_ESTEPS 14. //mm filament
|
||||||
|
#define EXTRUDER_RUNOUT_SPEED 1500. //extrusion speed
|
||||||
|
#define EXTRUDER_RUNOUT_EXTRUDE 100
|
||||||
|
|
||||||
|
// @section temperature
|
||||||
|
|
||||||
|
//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
|
||||||
|
//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
|
||||||
|
#define TEMP_SENSOR_AD595_OFFSET 0.0
|
||||||
|
#define TEMP_SENSOR_AD595_GAIN 1.0
|
||||||
|
|
||||||
|
//This is for controlling a fan to cool down the stepper drivers
|
||||||
|
//it will turn on when any driver is enabled
|
||||||
|
//and turn off after the set amount of seconds from last driver being disabled again
|
||||||
|
#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable)
|
||||||
|
#define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run
|
||||||
|
#define CONTROLLERFAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
// When first starting the main fan, run it at full speed for the
|
||||||
|
// given number of milliseconds. This gets the fan spinning reliably
|
||||||
|
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
|
||||||
|
//#define FAN_KICKSTART_TIME 100
|
||||||
|
|
||||||
|
// This defines the minimal speed for the main fan, run in PWM mode
|
||||||
|
// to enable uncomment and set minimal PWM speed for reliable running (1-255)
|
||||||
|
// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
|
||||||
|
//#define FAN_MIN_PWM 50
|
||||||
|
|
||||||
|
// @section extruder
|
||||||
|
|
||||||
|
// Extruder cooling fans
|
||||||
|
// Configure fan pin outputs to automatically turn on/off when the associated
|
||||||
|
// extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
|
||||||
|
// Multiple extruders can be assigned to the same pin in which case
|
||||||
|
// the fan will turn on when any selected extruder is above the threshold.
|
||||||
|
#define EXTRUDER_0_AUTO_FAN_PIN 11
|
||||||
|
#define EXTRUDER_1_AUTO_FAN_PIN 6
|
||||||
|
#define EXTRUDER_2_AUTO_FAN_PIN -1
|
||||||
|
#define EXTRUDER_3_AUTO_FAN_PIN -1
|
||||||
|
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||||
|
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||||
|
|
||||||
|
|
||||||
|
//===========================================================================
|
||||||
|
//=============================Mechanical Settings===========================
|
||||||
|
//===========================================================================
|
||||||
|
|
||||||
|
// @section homing
|
||||||
|
|
||||||
|
#define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing
|
||||||
|
|
||||||
|
// @section extras
|
||||||
|
|
||||||
|
//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats.
|
||||||
|
|
||||||
|
// A single Z stepper driver is usually used to drive 2 stepper motors.
|
||||||
|
// Uncomment this define to utilize a separate stepper driver for each Z axis motor.
|
||||||
|
// Only a few motherboards support this, like RAMPS, which have dual extruder support (the 2nd, often unused, extruder driver is used
|
||||||
|
// to control the 2nd Z axis stepper motor). The pins are currently only defined for a RAMPS motherboards.
|
||||||
|
// On a RAMPS (or other 5 driver) motherboard, using this feature will limit you to using 1 extruder.
|
||||||
|
//#define Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
|
||||||
|
|
||||||
|
// Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z steppers - Let's call them Z stepper and Z2 stepper.
|
||||||
|
// That way the machine is capable to align the bed during home, since both Z steppers are homed.
|
||||||
|
// There is also an implementation of M666 (software endstops adjustment) to this feature.
|
||||||
|
// After Z homing, this adjustment is applied to just one of the steppers in order to align the bed.
|
||||||
|
// One just need to home the Z axis and measure the distance difference between both Z axis and apply the math: Z adjust = Z - Z2.
|
||||||
|
// If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it is.. think about it) and the Z adjust would be positive.
|
||||||
|
// Play a little bit with small adjustments (0.5mm) and check the behaviour.
|
||||||
|
// The M119 (endstops report) will start reporting the Z2 Endstop as well.
|
||||||
|
|
||||||
|
//#define Z_DUAL_ENDSTOPS
|
||||||
|
|
||||||
|
#if ENABLED(Z_DUAL_ENDSTOPS)
|
||||||
|
#define Z2_USE_ENDSTOP _XMAX_
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif // Z_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
// Same again but for Y Axis.
|
||||||
|
//#define Y_DUAL_STEPPER_DRIVERS
|
||||||
|
|
||||||
|
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
|
||||||
|
// Define if the two Y drives need to rotate in opposite directions
|
||||||
|
#define INVERT_Y2_VS_Y_DIR true
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Enable this for dual x-carriage printers.
|
||||||
|
// A dual x-carriage design has the advantage that the inactive extruder can be parked which
|
||||||
|
// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
|
||||||
|
// allowing faster printing speeds.
|
||||||
|
//#define DUAL_X_CARRIAGE
|
||||||
|
#if ENABLED(DUAL_X_CARRIAGE)
|
||||||
|
// Configuration for second X-carriage
|
||||||
|
// Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
|
||||||
|
// the second x-carriage always homes to the maximum endstop.
|
||||||
|
#define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||||
|
#define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
|
||||||
|
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||||
|
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||||
|
// However: In this mode the EXTRUDER_OFFSET_X value for the second extruder provides a software
|
||||||
|
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
||||||
|
// without modifying the firmware (through the "M218 T1 X???" command).
|
||||||
|
// Remember: you should set the second extruder x-offset to 0 in your slicer.
|
||||||
|
|
||||||
|
// Pins for second x-carriage stepper driver (defined here to avoid further complicating pins.h)
|
||||||
|
#define X2_ENABLE_PIN 29
|
||||||
|
#define X2_STEP_PIN 25
|
||||||
|
#define X2_DIR_PIN 23
|
||||||
|
|
||||||
|
// There are a few selectable movement modes for dual x-carriages using M605 S<mode>
|
||||||
|
// Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
|
||||||
|
// as long as it supports dual x-carriages. (M605 S0)
|
||||||
|
// Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
|
||||||
|
// that additional slicer support is not required. (M605 S1)
|
||||||
|
// Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
|
||||||
|
// actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
|
||||||
|
// once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
|
||||||
|
|
||||||
|
// This is the default power-up mode which can be later using M605.
|
||||||
|
#define DEFAULT_DUAL_X_CARRIAGE_MODE 0
|
||||||
|
|
||||||
|
// Default settings in "Auto-park Mode"
|
||||||
|
#define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder
|
||||||
|
#define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder
|
||||||
|
|
||||||
|
// Default x offset in duplication mode (typically set to half print bed width)
|
||||||
|
#define DEFAULT_DUPLICATION_X_OFFSET 100
|
||||||
|
|
||||||
|
#endif //DUAL_X_CARRIAGE
|
||||||
|
|
||||||
|
// @section homing
|
||||||
|
|
||||||
|
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
|
||||||
|
#define X_HOME_BUMP_MM 5
|
||||||
|
#define Y_HOME_BUMP_MM 5
|
||||||
|
#define Z_HOME_BUMP_MM 2
|
||||||
|
#define HOMING_BUMP_DIVISOR {2, 2, 4} // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||||
|
//#define QUICK_HOME //if this is defined, if both x and y are to be homed, a diagonal move will be performed initially.
|
||||||
|
|
||||||
|
// When G28 is called, this option will make Y home before X
|
||||||
|
//#define HOME_Y_BEFORE_X
|
||||||
|
|
||||||
|
// @section machine
|
||||||
|
|
||||||
|
#define AXIS_RELATIVE_MODES {false, false, false, false}
|
||||||
|
|
||||||
|
// @section machine
|
||||||
|
|
||||||
|
//By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
|
||||||
|
#define INVERT_X_STEP_PIN false
|
||||||
|
#define INVERT_Y_STEP_PIN false
|
||||||
|
#define INVERT_Z_STEP_PIN false
|
||||||
|
#define INVERT_E_STEP_PIN false
|
||||||
|
|
||||||
|
// Default stepper release if idle. Set to 0 to deactivate.
|
||||||
|
// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
|
||||||
|
// Time can be set by M18 and M84.
|
||||||
|
#define DEFAULT_STEPPER_DEACTIVE_TIME 60
|
||||||
|
#define DISABLE_INACTIVE_X true
|
||||||
|
#define DISABLE_INACTIVE_Y true
|
||||||
|
#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished.
|
||||||
|
#define DISABLE_INACTIVE_E true
|
||||||
|
|
||||||
|
#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
|
||||||
|
#define DEFAULT_MINTRAVELFEEDRATE 0.0
|
||||||
|
|
||||||
|
// @section lcd
|
||||||
|
|
||||||
|
#if ENABLED(ULTIPANEL)
|
||||||
|
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
|
||||||
|
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// @section extras
|
||||||
|
|
||||||
|
// minimum time in microseconds that a movement needs to take if the buffer is emptied.
|
||||||
|
#define DEFAULT_MINSEGMENTTIME 20000
|
||||||
|
|
||||||
|
// If defined the movements slow down when the look ahead buffer is only half full
|
||||||
|
#define SLOWDOWN
|
||||||
|
|
||||||
|
// Frequency limit
|
||||||
|
// See nophead's blog for more info
|
||||||
|
// Not working O
|
||||||
|
//#define XY_FREQUENCY_LIMIT 15
|
||||||
|
|
||||||
|
// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
|
||||||
|
// of the buffer and all stops. This should not be much greater than zero and should only be changed
|
||||||
|
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
|
||||||
|
#define MINIMUM_PLANNER_SPEED 0.05// (mm/sec)
|
||||||
|
|
||||||
|
// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
|
||||||
|
#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
|
||||||
|
|
||||||
|
// Motor Current setting (Only functional when motor driver current ref pins are connected to a digital trimpot on supported boards)
|
||||||
|
#define DIGIPOT_MOTOR_CURRENT {150, 170, 180, 190, 180} // Values 0-255 (bq ZUM Mega 3D (default): X = 150 [~1.17A]; Y = 170 [~1.33A]; Z = 180 [~1.41A]; E0 = 190 [~1.49A])
|
||||||
|
|
||||||
|
// Motor Current controlled via PWM (Overridable on supported boards with PWM-driven motor driver current)
|
||||||
|
//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
|
||||||
|
|
||||||
|
// uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
|
//#define DIGIPOT_I2C
|
||||||
|
// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8
|
||||||
|
#define DIGIPOT_I2C_NUM_CHANNELS 8
|
||||||
|
// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}
|
||||||
|
|
||||||
|
//===========================================================================
|
||||||
|
//=============================Additional Features===========================
|
||||||
|
//===========================================================================
|
||||||
|
|
||||||
|
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
|
||||||
|
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
|
||||||
|
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
|
||||||
|
|
||||||
|
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
|
||||||
|
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
|
||||||
|
|
||||||
|
// @section lcd
|
||||||
|
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
|
||||||
|
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||||
|
// around this by connecting a push button or single throw switch to the pin defined
|
||||||
|
// as SD_DETECT_PIN in your board's pins definitions.
|
||||||
|
// This setting should be disabled unless you are using a push button, pulling the pin to ground.
|
||||||
|
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
|
||||||
|
#define SD_DETECT_INVERTED
|
||||||
|
|
||||||
|
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
|
||||||
|
#define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
|
||||||
|
|
||||||
|
#define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order.
|
||||||
|
// if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that.
|
||||||
|
// using:
|
||||||
|
#define MENU_ADDAUTOSTART
|
||||||
|
|
||||||
|
// Show a progress bar on HD44780 LCDs for SD printing
|
||||||
|
//#define LCD_PROGRESS_BAR
|
||||||
|
|
||||||
|
#if ENABLED(LCD_PROGRESS_BAR)
|
||||||
|
// Amount of time (ms) to show the bar
|
||||||
|
#define PROGRESS_BAR_BAR_TIME 2000
|
||||||
|
// Amount of time (ms) to show the status message
|
||||||
|
#define PROGRESS_BAR_MSG_TIME 3000
|
||||||
|
// Amount of time (ms) to retain the status message (0=forever)
|
||||||
|
#define PROGRESS_MSG_EXPIRE 0
|
||||||
|
// Enable this to show messages for MSG_TIME then hide them
|
||||||
|
//#define PROGRESS_MSG_ONCE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// This allows hosts to request long names for files and folders with M33
|
||||||
|
#define LONG_FILENAME_HOST_SUPPORT
|
||||||
|
|
||||||
|
// This option allows you to abort SD printing when any endstop is triggered.
|
||||||
|
// This feature must be enabled with "M540 S1" or from the LCD menu.
|
||||||
|
// To have any effect, endstops must be enabled during SD printing.
|
||||||
|
// With ENDSTOPS_ONLY_FOR_HOMING you must send "M120" to enable endstops.
|
||||||
|
//#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
|
||||||
|
|
||||||
|
#endif // SDSUPPORT
|
||||||
|
|
||||||
|
// for dogm lcd displays you can choose some additional fonts:
|
||||||
|
#if ENABLED(DOGLCD)
|
||||||
|
// save 3120 bytes of PROGMEM by commenting out #define USE_BIG_EDIT_FONT
|
||||||
|
// we don't have a big font for Cyrillic, Kana
|
||||||
|
//#define USE_BIG_EDIT_FONT
|
||||||
|
|
||||||
|
// If you have spare 2300Byte of progmem and want to use a
|
||||||
|
// smaller font on the Info-screen uncomment the next line.
|
||||||
|
#define USE_SMALL_INFOFONT
|
||||||
|
#endif // DOGLCD
|
||||||
|
|
||||||
|
// @section more
|
||||||
|
|
||||||
|
// The hardware watchdog should reset the microcontroller disabling all outputs, in case the firmware gets stuck and doesn't do temperature regulation.
|
||||||
|
#define USE_WATCHDOG
|
||||||
|
|
||||||
|
#if ENABLED(USE_WATCHDOG)
|
||||||
|
// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on.
|
||||||
|
// The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset.
|
||||||
|
// However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled.
|
||||||
|
//#define WATCHDOG_RESET_MANUAL
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// @section lcd
|
||||||
|
|
||||||
|
// Babystepping enables the user to control the axis in tiny amounts, independently from the normal printing process
|
||||||
|
// it can e.g. be used to change z-positions in the print startup phase in real-time
|
||||||
|
// does not respect endstops!
|
||||||
|
//#define BABYSTEPPING
|
||||||
|
#if ENABLED(BABYSTEPPING)
|
||||||
|
#define BABYSTEP_XY //not only z, but also XY in the menu. more clutter, more functions
|
||||||
|
//not implemented for deltabots!
|
||||||
|
#define BABYSTEP_INVERT_Z false //true for inverse movements in Z
|
||||||
|
#define BABYSTEP_MULTIPLICATOR 1 //faster movements
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// @section extruder
|
||||||
|
|
||||||
|
// extruder advance constant (s2/mm3)
|
||||||
|
//
|
||||||
|
// advance (steps) = STEPS_PER_CUBIC_MM_E * EXTRUDER_ADVANCE_K * cubic mm per second ^ 2
|
||||||
|
//
|
||||||
|
// Hooke's law says: force = k * distance
|
||||||
|
// Bernoulli's principle says: v ^ 2 / 2 + g . h + pressure / density = constant
|
||||||
|
// so: v ^ 2 is proportional to number of steps we advance the extruder
|
||||||
|
//#define ADVANCE
|
||||||
|
|
||||||
|
#if ENABLED(ADVANCE)
|
||||||
|
#define EXTRUDER_ADVANCE_K .0
|
||||||
|
#define D_FILAMENT 2.85
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// @section extras
|
||||||
|
|
||||||
|
// Arc interpretation settings:
|
||||||
|
#define MM_PER_ARC_SEGMENT 1
|
||||||
|
#define N_ARC_CORRECTION 25
|
||||||
|
|
||||||
|
const unsigned int dropsegments = 5; //everything with less than this number of steps will be ignored as move and joined with the next movement
|
||||||
|
|
||||||
|
// @section temperature
|
||||||
|
|
||||||
|
// Control heater 0 and heater 1 in parallel.
|
||||||
|
//#define HEATERS_PARALLEL
|
||||||
|
|
||||||
|
//===========================================================================
|
||||||
|
//================================= Buffers =================================
|
||||||
|
//===========================================================================
|
||||||
|
|
||||||
|
// @section hidden
|
||||||
|
|
||||||
|
// The number of linear motions that can be in the plan at any give time.
|
||||||
|
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2, i.g. 8,16,32 because shifts and ors are used to do the ring-buffering.
|
||||||
|
#if ENABLED(SDSUPPORT)
|
||||||
|
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||||
|
#else
|
||||||
|
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// @section more
|
||||||
|
|
||||||
|
//The ASCII buffer for receiving from the serial:
|
||||||
|
#define MAX_CMD_SIZE 96
|
||||||
|
#define BUFSIZE 4
|
||||||
|
|
||||||
|
// Bad Serial-connections can miss a received command by sending an 'ok'
|
||||||
|
// Therefore some clients abort after 30 seconds in a timeout.
|
||||||
|
// Some other clients start sending commands while receiving a 'wait'.
|
||||||
|
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
|
||||||
|
//#define NO_TIMEOUTS 1000 // Milliseconds
|
||||||
|
|
||||||
|
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||||
|
//#define ADVANCED_OK
|
||||||
|
|
||||||
|
// @section fwretract
|
||||||
|
|
||||||
|
// Firmware based and LCD controlled retract
|
||||||
|
// M207 and M208 can be used to define parameters for the retraction.
|
||||||
|
// The retraction can be called by the slicer using G10 and G11
|
||||||
|
// until then, intended retractions can be detected by moves that only extrude and the direction.
|
||||||
|
// the moves are than replaced by the firmware controlled ones.
|
||||||
|
|
||||||
|
//#define FWRETRACT //ONLY PARTIALLY TESTED
|
||||||
|
#if ENABLED(FWRETRACT)
|
||||||
|
#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
|
||||||
|
#define RETRACT_LENGTH 3 //default retract length (positive mm)
|
||||||
|
#define RETRACT_LENGTH_SWAP 13 //default swap retract length (positive mm), for extruder change
|
||||||
|
#define RETRACT_FEEDRATE 45 //default feedrate for retracting (mm/s)
|
||||||
|
#define RETRACT_ZLIFT 0 //default retract Z-lift
|
||||||
|
#define RETRACT_RECOVER_LENGTH 0 //default additional recover length (mm, added to retract length when recovering)
|
||||||
|
#define RETRACT_RECOVER_LENGTH_SWAP 0 //default additional swap recover length (mm, added to retract length when recovering from extruder change)
|
||||||
|
#define RETRACT_RECOVER_FEEDRATE 8 //default feedrate for recovering from retraction (mm/s)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Add support for experimental filament exchange support M600; requires display
|
||||||
|
#if ENABLED(ULTIPANEL)
|
||||||
|
//#define FILAMENTCHANGEENABLE
|
||||||
|
#if ENABLED(FILAMENTCHANGEENABLE)
|
||||||
|
#define FILAMENTCHANGE_XPOS 3
|
||||||
|
#define FILAMENTCHANGE_YPOS 3
|
||||||
|
#define FILAMENTCHANGE_ZADD 10
|
||||||
|
#define FILAMENTCHANGE_FIRSTRETRACT -2
|
||||||
|
#define FILAMENTCHANGE_FINALRETRACT -100
|
||||||
|
#define AUTO_FILAMENT_CHANGE //This extrude filament until you press the button on LCD
|
||||||
|
#define AUTO_FILAMENT_CHANGE_LENGTH 0.04 //Extrusion length on automatic extrusion loop
|
||||||
|
#define AUTO_FILAMENT_CHANGE_FEEDRATE 300 //Extrusion feedrate (mm/min) on automatic extrusion loop
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have TMC26X motor drivers.
|
||||||
|
* you need to import the TMC26XStepper library into the Arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
// @section tmc
|
||||||
|
|
||||||
|
//#define HAVE_TMCDRIVER
|
||||||
|
#if ENABLED(HAVE_TMCDRIVER)
|
||||||
|
|
||||||
|
//#define X_IS_TMC
|
||||||
|
#define X_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
//#define X2_IS_TMC
|
||||||
|
#define X2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define X2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
//#define Y_IS_TMC
|
||||||
|
#define Y_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
//#define Y2_IS_TMC
|
||||||
|
#define Y2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Y2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
//#define Z_IS_TMC
|
||||||
|
#define Z_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
//#define Z2_IS_TMC
|
||||||
|
#define Z2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define Z2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
//#define E0_IS_TMC
|
||||||
|
#define E0_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E0_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
//#define E1_IS_TMC
|
||||||
|
#define E1_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E1_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
//#define E2_IS_TMC
|
||||||
|
#define E2_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E2_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
//#define E3_IS_TMC
|
||||||
|
#define E3_MAX_CURRENT 1000 //in mA
|
||||||
|
#define E3_SENSE_RESISTOR 91 //in mOhms
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/******************************************************************************\
|
||||||
|
* enable this section if you have L6470 motor drivers.
|
||||||
|
* you need to import the L6470 library into the Arduino IDE for this
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
// @section l6470
|
||||||
|
|
||||||
|
//#define HAVE_L6470DRIVER
|
||||||
|
#if ENABLED(HAVE_L6470DRIVER)
|
||||||
|
|
||||||
|
//#define X_IS_L6470
|
||||||
|
#define X_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
|
||||||
|
#define X_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
//#define X2_IS_L6470
|
||||||
|
#define X2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define X2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
|
||||||
|
#define X2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define X2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
//#define Y_IS_L6470
|
||||||
|
#define Y_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
|
||||||
|
#define Y_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
//#define Y2_IS_L6470
|
||||||
|
#define Y2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Y2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
|
||||||
|
#define Y2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Y2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
//#define Z_IS_L6470
|
||||||
|
#define Z_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
|
||||||
|
#define Z_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
//#define Z2_IS_L6470
|
||||||
|
#define Z2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define Z2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
|
||||||
|
#define Z2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define Z2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
//#define E0_IS_L6470
|
||||||
|
#define E0_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E0_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
|
||||||
|
#define E0_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E0_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
//#define E1_IS_L6470
|
||||||
|
#define E1_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E1_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
|
||||||
|
#define E1_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E1_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
//#define E2_IS_L6470
|
||||||
|
#define E2_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E2_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
|
||||||
|
#define E2_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E2_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
//#define E3_IS_L6470
|
||||||
|
#define E3_MICROSTEPS 16 //number of microsteps
|
||||||
|
#define E3_K_VAL 50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
|
||||||
|
#define E3_OVERCURRENT 2000 //maxc current in mA. If the current goes over this value, the driver will switch off
|
||||||
|
#define E3_STALLCURRENT 1500 //current in mA where the driver will detect a stall
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#include "Conditionals.h"
|
||||||
|
#include "SanityCheck.h"
|
||||||
|
|
||||||
|
#endif //CONFIGURATION_ADV_H
|
||||||
@ -0,0 +1,8 @@
|
|||||||
|
# Example Configuration for BQ [Hephestos 2](http://www.bq.com/uk/hephestos-2)
|
||||||
|
This configuration file is based on the original configuration file shipped with the heavily modified Marlin fork by BQ. The original firmware and configuration file can be found at [BQ Github repository](https://github.com/bq/Marlin).
|
||||||
|
|
||||||
|
NOTE: The look and feel of the Hephestos 2 while navigating the LCD menu will change by using the original Marlin firmware.
|
||||||
|
|
||||||
|
## Changelog
|
||||||
|
* 2016/03/01 - Initial release
|
||||||
|
* 2016/03/21 - Activated four point auto leveling by default; updated miscellaneous z-probe values
|
||||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue