microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Merge pull request #8425 from Vynt-1/bugfix-2.0.x

Browse Source 
Update pins_RuRAMPS
2.0.x
Scott Lahteine 7 years ago committed by GitHub
parent 9770062309 e2724c68ab
commit 5cfdb76186
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 122 additions and 77 deletions
Show Stats Download Patch File Download Diff File

2
Marlin/src/module/temperature.cpp
Unescape Escape View File

@ -1302,7 +1302,7 @@ void Temperature::init() {
case TIMER5A: case TIMER5B: case TIMER5C: _SET_CS(5, val); break;
#endif
}
#endif
#endif
}
#endif // FAST_PWM_FAN

197
Marlin/src/pins/pins_RURAMPS4D.h
Unescape Escape View File

@ -29,9 +29,7 @@
*
* Differences between
* RADDS | RuRAMPS4DUE
* A13 | A9/D63 (shares the same pin with AUX2_4PIN)
* A14 | A10/D64 (shares the same pin with AUX2_5PIN)
* A15 | NC
* |
*/
#ifndef __SAM3X8E__
@ -39,16 +37,14 @@
#endif
#ifndef BOARD_NAME
#define BOARD_NAME "RuRAMPS4Due"
#define BOARD_NAME "RuRAMPS4Due"
#endif
#define RURAMPS4DUE // #1550 in boards.h
#undef INVERTED_HEATER_PINS
#undef INVERTED_BED_PINS
#undef INVERTED_FAN_PINS
#define I2C_EEPROM
//#define SPI_EEPROM
//
// Servos
//
@ -77,18 +73,18 @@
//
// Steppers
//
#define X_STEP_PIN 37
#define X_STEP_PIN 37 // Support Extension Board
#define X_DIR_PIN 36
#define X_ENABLE_PIN 38
#define X_CS_PIN -1
#define Y_STEP_PIN 32
#define Y_STEP_PIN 32 // Support Extension Board
#define Y_DIR_PIN 35
#define Y_ENABLE_PIN 34
#define Y_CS_PIN -1
#define Z_STEP_PIN 30
#define Z_DIR_PIN 2
#define Z_STEP_PIN 30 // Support Extension Board
#define Z_DIR_PIN 2
#define Z_ENABLE_PIN 33
#define Z_CS_PIN -1
@ -102,48 +98,43 @@
#define E1_ENABLE_PIN 26
#define E1_CS_PIN -1
#define E2_STEP_PIN 25 //14 //sys0724
#define E2_DIR_PIN 23 //15
#define E2_ENABLE_PIN 27 //61
#define E2_STEP_PIN 25
#define E2_DIR_PIN 23
#define E2_ENABLE_PIN 27
#define E2_CS_PIN -1
// For Extension Board V2
// http://doku.radds.org/dokumentation/extension-board
//#define E3_STEP_PIN 35
//#define E3_DIR_PIN 33
//#define E3_ENABLE_PIN 37
//#define E3_CS_PIN 6
//#define Z2_STEP_PIN 29
//#define Z2_DIR_PIN 27
//#define Z2_ENABLE_PIN 31
//#define Z2_CS_PIN 39
#define E3_STEP_PIN 15 // Only For Extension Board
#define E3_DIR_PIN 14
#define E3_ENABLE_PIN 61
#define E3_CS_PIN -1
// Microstepping pins - Mapping not from fastio.h (?)
//#define E3_MS1_PIN 67
//#define E3_MS2_PIN 68
//#define E3_MS3_PIN 69
//#define Z2_MS1_PIN 67 // shared with E3_MS1_PIN
//#define Z2_MS2_PIN 68 // shared with E3_MS2_PIN
//#define Z2_MS3_PIN 69 // shared with E3_MS3_PIN
// For Future: Microstepping pins - Mapping not from fastio.h (?)
//#define E3_MS1_PIN ?
//#define E3_MS2_PIN ?
//#define E3_MS3_PIN ?
//#define Z2_MS1_PIN ? // shared with E3_MS1_PIN
//#define Z2_MS2_PIN ? // shared with E3_MS2_PIN
//#define Z2_MS3_PIN ? // shared with E3_MS3_PIN
//
// Temperature Sensors
// Limit Switches
//
#define TEMP_0_PIN 0 // ANALOG NUMBERING #54
#define TEMP_1_PIN 1 // ANALOG NUMBERING #55
#define TEMP_2_PIN 2 // ANALOG NUMBERING #56
#define TEMP_3_PIN 3 // ANALOG NUMBERING #57
#define TEMP_BED_PIN 4 // ANALOG NUMBERING #58
#define X_MIN_PIN 45
#define X_MAX_PIN 39
#define Y_MIN_PIN 46
#define Y_MAX_PIN 41
#define Z_MIN_PIN 47
#define Z_MAX_PIN 43
/*
// SPI for Max6675 or Max31855 Thermocouple
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 53
#else
#define MAX6675_SS 49
#if !ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#define Z_PROBE_PIN 49
#endif // else Z_PROBE_PIN = Z_MIN_PIN
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN Y_MIN_PIN
#endif
#endif
*/
//
// Heaters / Fans
@ -151,18 +142,73 @@
#define HEATER_0_PIN 13
#define HEATER_1_PIN 12
#define HEATER_2_PIN 11
#define HEATER_BED_PIN 7 // BED H1
#define HEATER_BED_PIN 7 // BED H1
#define FAN_PIN 9
#define FAN1_PIN 8
#define CONTROLLER_FAN_PIN -1
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // ANALOG A0
#define TEMP_1_PIN 1 // ANALOG A1
#define TEMP_2_PIN 2 // ANALOG A2
#define TEMP_3_PIN 3 // ANALOG A2
#define TEMP_BED_PIN 4 // ANALOG A3
//Thermocouple Use Analog Pins
#if ENABLED(VER_WITH_THERMOCOUPLE) // If Nead, define is in Configuration.h
#define TEMP_4_PIN 5 // A5
#define TEMP_5_PIN 6 // A6 (Marlin 2.0 not support)
#endif
// SPI for Max6675 or Max31855 Thermocouple
//#if DISABLED(SDSUPPORT)
// #define MAX6675_SS 53
//#else
// #define MAX6675_SS 49
//#endif
//
// Servos
//
#define SERVO0_PIN 5
#define SERVO1_PIN 3
#define SERVO2_PIN -1
#define SERVO3_PIN -1
//
// Misc. Functions
//
#define SDSS 4 // 4,10,52 if using HW SPI.
#define LED_PIN 13
#define SDSS 4 // 4,10,52 if using HW SPI.
#define LED_PIN -1 // 13 - HEATER_0_PIN
#define SDPOWER -1
#define PS_ON_PIN -1 // 65
#define KILL_PIN -1
// MKS TFT / Nextion Use internal USART-1
#define TFT_LCD_MODULE_COM 1
#define TFT_LCD_MODULE_BAUDRATE 115600
// ESP WiFi Use internal USART-2
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115600
#define ESP_WIFI_MODULE_RESET_PIN -1
#define PIGGY_GPIO_PIN -1
//#define FIL_RUNOUT_PIN Y_MIN_PIN
//
// EEPROM
//
#define E2END 0x8000 // 32Kb (24lc256)
#define I2C_EEPROM // EEPROM on I2C-0
//#define EEPROM_SD // EEPROM on SDCARD
//#define SPI_EEPROM // EEPROM on SPI-0
//#define SPI_CHAN_EEPROM1 ?
//#define SPI_EEPROM1_CS ?
// 2K EEPROM
//#define SPI_EEPROM2_CS ?
// 32Mb FLASH
//#define SPI_FLASH_CS ?
//
// LCD / Controller
@ -186,39 +232,38 @@
#define SD_DETECT_PIN 51
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define LCD_PINS_RS 52 //?
#define LCD_PINS_ENABLE 53 //?
#define LCD_PINS_D4 48 //?
#define LCD_PINS_D5 50 //?
#define LCD_PINS_D6 52 //?
#define LCD_PINS_D7 53 //?
#define LCD_PINS_RS 52
#define LCD_PINS_ENABLE 53
#define LCD_PINS_D4 48
#define LCD_PINS_D5 50
#define LCD_PINS_D6 52
#define LCD_PINS_D7 53
#define BEEPER_PIN 62
#define BTN_EN1 44 //!
#define BTN_EN2 42 //!
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BTN_EN1 44
#define BTN_EN2 42
#define BTN_ENC 40
#define SD_DETECT_PIN 51
#endif
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
#define BTN_EN1 44
#define BTN_EN2 42
#define BTN_ENC 40
#define BEEPER_PIN 62
#define LCD_SDSS 10
#define SD_DETECT_PIN 51
#elif ENABLED(SSD1306_OLED_I2C_CONTROLLER)
#define BTN_EN1 44 //?
#define BTN_EN2 42 //?
#define BTN_ENC 40 //?
#define SD_DETECT_PIN 51 //?
#define BEEPER_PIN 62 //?
#define LCD_SDSS 10 //?
#elif ENABLED(SPARK_FULL_GRAPHICS) //!!! - check!
#define LCD_PINS_D4 29
#define LCD_PINS_ENABLE 27
#define LCD_PINS_RS 25
#define BTN_EN1 35
#define BTN_EN2 33
#define BTN_ENC 37
#elif ENABLED(SPARK_FULL_GRAPHICS)
//http://doku.radds.org/dokumentation/other-electronics/sparklcd/
#error "Oops! SPARK_FULL_GRAPHICS not supported with this board"
//#define LCD_PINS_D4 29//?
//#define LCD_PINS_ENABLE 27//?
//#define LCD_PINS_RS 25//?
//#define BTN_EN1 35//?
//#define BTN_EN2 33//?
//#define BTN_ENC 37//?
#endif // SPARK_FULL_GRAPHICS
#endif // ULTRA_LCD

Write Preview
Loading…
Cancel
Save