Merge pull request #4257 from esenapaj/Follow-up-the-PR-#4253-etc

Follow-up the PR #4253 (Runout Sensor without SD Card, Print Timer support in M104), etc

Marlin/Conditionals.h

@@ -846,16 +846,16 @@
   /**
    * MIN_Z_HEIGHT_FOR_HOMING / Z_RAISE_BETWEEN_PROBINGS
    */
-   #ifndef MIN_Z_HEIGHT_FOR_HOMING
+  #ifndef MIN_Z_HEIGHT_FOR_HOMING
-     #ifndef Z_RAISE_BETWEEN_PROBINGS
+    #ifndef Z_RAISE_BETWEEN_PROBINGS
-       #define MIN_Z_HEIGHT_FOR_HOMING 0
+      #define MIN_Z_HEIGHT_FOR_HOMING 0
-     #else
+    #else
-       #define MIN_Z_HEIGHT_FOR_HOMING Z_RAISE_BETWEEN_PROBINGS
+      #define MIN_Z_HEIGHT_FOR_HOMING Z_RAISE_BETWEEN_PROBINGS
-     #endif
+    #endif
-   #endif
+  #endif
-   #ifndef Z_RAISE_BETWEEN_PROBINGS
+  #ifndef Z_RAISE_BETWEEN_PROBINGS
-     #define Z_RAISE_BETWEEN_PROBING MIN_Z_HEIGHT_FOR_HOMING
+    #define Z_RAISE_BETWEEN_PROBING MIN_Z_HEIGHT_FOR_HOMING
-   #endif
+  #endif
 
 #endif //CONFIGURATION_LCD
 #endif //CONDITIONALS_H

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -771,7 +771,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/K8400/Dual Heads/Configuration.h

@@ -790,7 +790,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands: