Expose EXT_SOLENOID as an advanced option

8 years ago · 5803ba43a9
parent ea734f910b
commit 5803ba43a9
20 changed files with 100 additions and 20 deletions
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@ -342,6 +342,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/K8400/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@ -337,6 +337,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/flsun_kossel_mini/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@ -334,6 +334,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@ -329,6 +329,10 @@

 #endif // DUAL_X_CARRIAGE

+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
 // @section homing

 //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: