Merge pull request #4040 from esenapaj/Follow-up-the-PR-#3676

Follow-up the PR #3676(Advance extrusion algorithm – LIN_ADVANCE)

Marlin/example_configurations/Felix/Configuration_adv.h

@@ -445,6 +445,15 @@
   #define D_FILAMENT 2.85
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/Hephestos/Configuration_adv.h

@@ -445,6 +445,15 @@
   #define D_FILAMENT 1.75
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/Hephestos_2/Configuration_adv.h

@@ -445,6 +445,15 @@
   #define D_FILAMENT 2.85
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/K8200/Configuration_adv.h

@@ -451,6 +451,15 @@
   #define D_FILAMENT 2.85
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/RigidBot/Configuration_adv.h

@@ -445,6 +445,15 @@
   #define D_FILAMENT 1.75
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/SCARA/Configuration_adv.h

@@ -445,6 +445,15 @@
   #define D_FILAMENT 1.75
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/TAZ4/Configuration_adv.h

@@ -453,6 +453,15 @@
   #define D_FILAMENT 2.85
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/WITBOX/Configuration_adv.h

@@ -445,6 +445,15 @@
   #define D_FILAMENT 1.75
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/delta/biv2.5/Configuration_adv.h

@@ -447,6 +447,15 @@
   #define D_FILAMENT 2.85
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/delta/generic/Configuration_adv.h

@@ -447,6 +447,15 @@
   #define D_FILAMENT 2.85
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@@ -446,6 +446,15 @@
   #define D_FILAMENT 2.85
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@@ -451,6 +451,15 @@
   #define D_FILAMENT 2.85
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@@ -447,6 +447,15 @@
   #define D_FILAMENT 2.85
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/makibox/Configuration_adv.h

@@ -445,6 +445,15 @@
   #define D_FILAMENT 2.85
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@@ -445,6 +445,15 @@
   #define D_FILAMENT 2.85
 #endif
 
+// Implementation of a linear pressure control
+// Assumption: advance = k * (delta velocity)
+// K=0 means advance disabled. A good value for a gregs wade extruder will be around K=75
+//#define LIN_ADVANCE
+
+#if ENABLED(LIN_ADVANCE)
+  #define LIN_ADVANCE_K 75
+#endif
+
 // @section leveling
 
 // Default mesh area is an area with an inset margin on the print area.