Add heating progress bars (#12543)

Marlin/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/default/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Anet/A2/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/ArmEd/Configuration_adv.h

@@ -789,6 +789,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -816,6 +816,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -825,6 +825,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Einstart-S/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -821,6 +821,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -822,6 +822,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -825,6 +825,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -830,6 +830,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -819,6 +819,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h

@@ -819,6 +819,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -819,6 +819,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -819,6 +819,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -819,6 +819,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h

@@ -819,6 +819,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h

@@ -819,6 +819,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h

@@ -819,6 +819,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -819,6 +819,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -819,6 +819,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -819,6 +819,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -817,6 +817,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -818,6 +818,7 @@
   #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
+  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
 
 #endif // HAS_GRAPHICAL_LCD
 

Marlin/src/lcd/dogm/dogm_Statusscreen.h

@@ -31,6 +31,8 @@
 
 #include "../../inc/MarlinConfig.h"
 
+#define BW(N) ((N + 7) / 8)
+
 #if ENABLED(CUSTOM_STATUS_SCREEN_IMAGE)
 
   /**
@@ -49,13 +51,18 @@
 
 #endif
 
+#if ENABLED(STATUS_COMBINE_HEATERS)
+  #undef STATUS_HOTEND_ANIM
+  #undef STATUS_BED_ANIM
+#endif
+
 //
 // Default Status Screen Heater or Hotends bitmaps
 //
 
 #if !STATUS_HEATERS_WIDTH && !STATUS_HOTEND1_WIDTH
 
-  #ifdef STATUS_COMBINE_HEATERS
+  #if ENABLED(STATUS_COMBINE_HEATERS)
 
     //
     // Status Screen Combined Heater bitmaps
@@ -67,6 +74,8 @@
 
     #if HAS_HEATED_BED && HOTENDS <= 3
 
+      #define STATUS_BED_WIDTH  18
+
       #if HOTENDS == 0
 
         #define STATUS_HEATERS_WIDTH  18
@@ -89,6 +98,7 @@
       #elif HOTENDS == 1
 
         #define STATUS_HEATERS_WIDTH  90
+        #define STATUS_BED_X 80
 
         const unsigned char status_heaters_bmp[] PROGMEM = {
           B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B10000010,B00000000,
@@ -237,7 +247,7 @@
 
       #define STATUS_HOTEND1_WIDTH  12
 
-      #if HOTENDS == 1 || defined(STATUS_HOTEND_NUMBERLESS)
+      #if HOTENDS == 1 || ENABLED(STATUS_HOTEND_NUMBERLESS)
 
         const unsigned char status_hotend_a_bmp[] PROGMEM = {
           B00011111,B11100000,
@@ -563,9 +573,9 @@
 // Default Status Screen Bed bitmaps
 //
 
-#if !STATUS_BED_WIDTH && !defined(STATUS_COMBINE_HEATERS) && HAS_HEATED_BED && HOTENDS < 4
+#if !STATUS_BED_WIDTH && DISABLED(STATUS_COMBINE_HEATERS) && HAS_HEATED_BED && HOTENDS < 4
 
-  #ifdef STATUS_ALT_BED_BITMAP
+  #if ENABLED(STATUS_ALT_BED_BITMAP)
 
     #define STATUS_BED_ANIM
     #define STATUS_BED_WIDTH  24
@@ -886,7 +896,7 @@
   #define STATUS_LOGO_WIDTH 0
 #endif
 #ifndef STATUS_LOGO_BYTEWIDTH
-  #define STATUS_LOGO_BYTEWIDTH ((STATUS_LOGO_WIDTH + 7) / 8)
+  #define STATUS_LOGO_BYTEWIDTH BW(STATUS_LOGO_WIDTH)
 #endif
 #if STATUS_LOGO_WIDTH
   #ifndef STATUS_LOGO_X
@@ -953,22 +963,22 @@
   #define STATUS_HOTEND_WIDTH(N) status_hotend_width[N]
 
   #ifndef STATUS_HOTEND1_BYTEWIDTH
-    #define STATUS_HOTEND1_BYTEWIDTH ((STATUS_HOTEND1_WIDTH + 7) / 8)
+    #define STATUS_HOTEND1_BYTEWIDTH BW(STATUS_HOTEND1_WIDTH)
   #endif
   #ifndef STATUS_HOTEND2_BYTEWIDTH
-    #define STATUS_HOTEND2_BYTEWIDTH ((STATUS_HOTEND2_WIDTH + 7) / 8)
+    #define STATUS_HOTEND2_BYTEWIDTH BW(STATUS_HOTEND2_WIDTH)
   #endif
   #ifndef STATUS_HOTEND3_BYTEWIDTH
-    #define STATUS_HOTEND3_BYTEWIDTH ((STATUS_HOTEND3_WIDTH + 7) / 8)
+    #define STATUS_HOTEND3_BYTEWIDTH BW(STATUS_HOTEND3_WIDTH)
   #endif
   #ifndef STATUS_HOTEND4_BYTEWIDTH
-    #define STATUS_HOTEND4_BYTEWIDTH ((STATUS_HOTEND4_WIDTH + 7) / 8)
+    #define STATUS_HOTEND4_BYTEWIDTH BW(STATUS_HOTEND4_WIDTH)
   #endif
   #ifndef STATUS_HOTEND5_BYTEWIDTH
-    #define STATUS_HOTEND5_BYTEWIDTH ((STATUS_HOTEND5_WIDTH + 7) / 8)
+    #define STATUS_HOTEND5_BYTEWIDTH BW(STATUS_HOTEND5_WIDTH)
   #endif
   #ifndef STATUS_HOTEND6_BYTEWIDTH
-    #define STATUS_HOTEND6_BYTEWIDTH ((STATUS_HOTEND6_WIDTH + 7) / 8)
+    #define STATUS_HOTEND6_BYTEWIDTH BW(STATUS_HOTEND6_WIDTH)
   #endif
 
   constexpr uint8_t status_hotend_bytewidth[HOTENDS] = ARRAY_N(HOTENDS, STATUS_HOTEND1_BYTEWIDTH, STATUS_HOTEND2_BYTEWIDTH, STATUS_HOTEND3_BYTEWIDTH, STATUS_HOTEND4_BYTEWIDTH, STATUS_HOTEND5_BYTEWIDTH, STATUS_HOTEND6_BYTEWIDTH);
@@ -1054,11 +1064,20 @@
 
 #elif STATUS_HEATERS_WIDTH
 
+  #ifndef STATUS_HEATERS_XSPACE
+    #define STATUS_HEATERS_XSPACE 24
+  #endif
+  #ifndef STATUS_HOTEND_WIDTH
+    #define STATUS_HOTEND_WIDTH(N) 10
+  #endif
+  #ifndef STATUS_HOTEND_X
+    #define STATUS_HOTEND_X(N) (STATUS_HEATERS_X + 2 + (N) * (STATUS_HEATERS_XSPACE))
+  #endif
   #ifndef STATUS_HOTEND_TEXT_X
     #define STATUS_HOTEND_TEXT_X(N) (STATUS_HEATERS_X + 6 + (N) * (STATUS_HEATERS_XSPACE))
   #endif
   #ifndef STATUS_HEATERS_BYTEWIDTH
-    #define STATUS_HEATERS_BYTEWIDTH ((STATUS_HEATERS_WIDTH + 7) / 8)
+    #define STATUS_HEATERS_BYTEWIDTH BW(STATUS_HEATERS_WIDTH)
   #endif
   #ifndef STATUS_HEATERS_HEIGHT
     #define STATUS_HEATERS_HEIGHT (sizeof(status_heaters_bmp) / (STATUS_HEATERS_BYTEWIDTH))
@@ -1081,9 +1100,9 @@
   #define STATUS_BED_WIDTH 0
 #endif
 #ifndef STATUS_BED_BYTEWIDTH
-  #define STATUS_BED_BYTEWIDTH ((STATUS_BED_WIDTH + 7) / 8)
+  #define STATUS_BED_BYTEWIDTH BW(STATUS_BED_WIDTH)
 #endif
-#if STATUS_BED_WIDTH
+#if STATUS_BED_WIDTH && !STATUS_HEATERS_WIDTH
 
   #ifndef STATUS_BED_X
     #define STATUS_BED_X (128 - (STATUS_FAN_BYTEWIDTH + STATUS_BED_BYTEWIDTH) * 8)
@@ -1125,7 +1144,7 @@
   #define STATUS_FAN_WIDTH 0
 #endif
 #ifndef STATUS_FAN_BYTEWIDTH
-  #define STATUS_FAN_BYTEWIDTH ((STATUS_FAN_WIDTH + 7) / 8)
+  #define STATUS_FAN_BYTEWIDTH BW(STATUS_FAN_WIDTH)
 #endif
 #if STATUS_FAN_FRAMES
   #ifndef STATUS_FAN_X

Marlin/src/lcd/dogm/status_screen_DOGM.cpp

@@ -51,87 +51,151 @@
   #include "../../module/printcounter.h"
 #endif
 
-FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t x, const uint8_t y) {
+FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, const uint8_t ty) {
   const char *str = itostr3(temp);
   const uint8_t len = str[0] != ' ' ? 3 : str[1] != ' ' ? 2 : 1;
-  lcd_moveto(x - len * (INFO_FONT_WIDTH) / 2 + 1, y);
+  lcd_moveto(tx - len * (INFO_FONT_WIDTH) / 2 + 1, ty);
   lcd_put_u8str(&str[3-len]);
   lcd_put_wchar(LCD_STR_DEGREE[0]);
 }
 
-#if ENABLED(MARLIN_DEV_MODE)
+#define DO_DRAW_BED (HAS_HEATED_BED && STATUS_BED_WIDTH && HOTENDS <= 3 && DISABLED(STATUS_COMBINE_HEATERS))
-  #define SHOW_ON_STATE READ(X_MIN_PIN)
+#define DO_DRAW_FAN (HAS_FAN0 && STATUS_FAN_WIDTH && STATUS_FAN_FRAMES)
+#define ANIM_HOTEND (HOTENDS && ENABLED(STATUS_HOTEND_ANIM))
+#define ANIM_BED (DO_DRAW_BED && ENABLED(STATUS_BED_ANIM))
+
+#if ANIM_HOTEND || ANIM_BED
+  uint8_t heat_bits;
+#endif
+#if ANIM_HOTEND
+  #define HOTEND_ALT(N) TEST(heat_bits, N)
+#else
+  #define HOTEND_ALT(N) false
+#endif
+#if ANIM_BED
+  #define BED_ALT() TEST(heat_bits, 7)
 #else
-  #define SHOW_ON_STATE false
+  #define BED_ALT() false
 #endif
 
-FORCE_INLINE void _draw_heater_status(const uint8_t x, const int8_t heater, const bool blink) {
+#define MAX_HOTEND_DRAW MIN(HOTENDS, ((LCD_PIXEL_WIDTH - (STATUS_LOGO_BYTEWIDTH + STATUS_FAN_BYTEWIDTH) * 8) / (STATUS_HEATERS_XSPACE)))
+#define STATUS_HEATERS_BOT (STATUS_HEATERS_Y + STATUS_HEATERS_HEIGHT - 1)
+
+FORCE_INLINE void _draw_heater_status(const int8_t heater, const bool blink) {
   #if !HEATER_IDLE_HANDLER
     UNUSED(blink);
   #endif
 
   #if HAS_HEATED_BED
     const bool isBed = heater < 0;
+    #define IFBED(A,B) (isBed ? (A) : (B))
   #else
-    constexpr bool isBed = false;
+    #define IFBED(A,B) (B)
   #endif
 
-  if (PAGE_UNDER(7)) {
+  const bool isHeat = IFBED(BED_ALT(), HOTEND_ALT(heater));
-    #if HEATER_IDLE_HANDLER
+  const uint8_t ix = IFBED(STATUS_BED_X, STATUS_HOTEND_X(heater)),
-      const bool is_idle = (
+                tx = IFBED(STATUS_BED_TEXT_X, STATUS_HOTEND_TEXT_X(heater));
-        #if HAS_HEATED_BED
+  const float temp = IFBED(thermalManager.degBed(), thermalManager.degHotend(heater)),
-          isBed ? thermalManager.is_bed_idle() :
+              target = IFBED(thermalManager.degTargetBed(), thermalManager.degTargetHotend(heater));
-        #endif
-        thermalManager.is_heater_idle(heater)
-      );
 
-      if (blink || !is_idle)
+  #if DISABLED(STATUS_HOTEND_ANIM)
-    #endif
+    #define STATIC_HOTEND true
-        _draw_centered_temp(0.5 + (
+    #define HOTEND_DOT    isHeat
-            #if HAS_HEATED_BED
+  #else
-              isBed ? thermalManager.degTargetBed() :
+    #define STATIC_HOTEND false
-            #endif
+    #define HOTEND_DOT    false
-            thermalManager.degTargetHotend(heater)
+  #endif
-          ), x, 7
-        );
-  }
 
-  if (PAGE_CONTAINS(21, 28))
+  #if HAS_HEATED_BED && DISABLED(STATUS_BED_ANIM)
-    _draw_centered_temp(0.5f + (
+    #define STATIC_BED    true
-        #if HAS_HEATED_BED
+    #define BED_DOT       isHeat
-          isBed ? thermalManager.degBed() :
+  #else
-        #endif
+    #define STATIC_BED    false
-        thermalManager.degHotend(heater)
+    #define BED_DOT       false
-      ), x, 28
+  #endif
-    );
 
-  #ifndef STATUS_HOTEND_ANIM
+  #if ANIM_HOTEND && ENABLED(STATUS_HOTEND_INVERTED)
-    #define INDICATE_HOTEND    true
+    #define OFF_BMP(N) status_hotend##N##_b_bmp
-    #define INDICATE_HOTEND_ON (thermalManager.isHeatingHotend(heater) ^ SHOW_ON_STATE)
+    #define ON_BMP(N)  status_hotend##N##_a_bmp
   #else
-    #define INDICATE_HOTEND    false
+    #define OFF_BMP(N) status_hotend##N##_a_bmp
-    #define INDICATE_HOTEND_ON false
+    #define ON_BMP(N)  status_hotend##N##_b_bmp
   #endif
 
-  #if HAS_HEATED_BED && !defined(STATUS_BED_ANIM)
+  #if STATUS_HOTEND_BITMAPS > 1
-    #define INDICATE_BED    true
+    static const unsigned char* const status_hotend_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, OFF_BMP(1), OFF_BMP(2), OFF_BMP(3), OFF_BMP(4), OFF_BMP(5), OFF_BMP(6));
-    #define INDICATE_BED_ON (thermalManager.isHeatingBed() ^ SHOW_ON_STATE)
+    #if ANIM_HOTEND
+      static const unsigned char* const status_hotend_on_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, ON_BMP(1), ON_BMP(2), ON_BMP(3), ON_BMP(4), ON_BMP(5), ON_BMP(6));
+      #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr((S) ? &status_hotend_on_gfx[(N) % (STATUS_HOTEND_BITMAPS)] : &status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)])
+    #else
+      #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr(&status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)])
+    #endif
+  #elif ANIM_HOTEND
+    #define HOTEND_BITMAP(N,S) ((S) ? ON_BMP() : OFF_BMP())
   #else
-    #define INDICATE_BED    false
+    #define HOTEND_BITMAP(N,S) status_hotend_a_bmp
-    #define INDICATE_BED_ON false
   #endif
 
-  if (isBed ? INDICATE_BED : INDICATE_HOTEND) {
+  if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) {
-    if (PAGE_CONTAINS(17, 20)) {
+
-      const uint8_t y = 20 - (isBed ? 2 : 3);
+    #define BAR_TALL (STATUS_HEATERS_HEIGHT - 2)
-      if (isBed ? INDICATE_BED_ON : INDICATE_HOTEND_ON) {
+
-        u8g.setColorIndex(0); // set to white on black
+    const float prop = target - 20,
-        u8g.drawBox(x, y, 2, 2);
+                perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0;
-        u8g.setColorIndex(1); // restore black on white
+    uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f);
+    NOMORE(tall, BAR_TALL);
+
+    #ifdef STATUS_HOTEND_ANIM
+      // Draw hotend bitmap, either whole or split by the heating percent
+      if (IFBED(0, 1)) {
+        const uint8_t hx = STATUS_HOTEND_X(heater), bw = STATUS_HOTEND_BYTEWIDTH(heater);
+        #if ENABLED(STATUS_HEAT_PERCENT)
+          if (isHeat && tall <= BAR_TALL) {
+            const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall;
+            u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, ph, HOTEND_BITMAP(heater, false));
+            u8g.drawBitmapP(hx, STATUS_HEATERS_Y + ph, bw, tall + 1, HOTEND_BITMAP(heater, true) + ph * bw);
+          }
+          else
+        #endif
+            u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, STATUS_HEATERS_HEIGHT, HOTEND_BITMAP(heater, isHeat));
       }
-      else
+    #endif
-        u8g.drawBox(x, y, 2, 2);
+
-    }
+    // Draw a heating progress bar, if specified
+    #if ENABLED(STATUS_HEAT_PERCENT)
+
+      if (IFBED(true, STATIC_HOTEND) && isHeat) {
+        const uint8_t bx = ix + IFBED(STATUS_BED_WIDTH, STATUS_HOTEND_WIDTH(heater)) + 1;
+        u8g.drawFrame(bx, STATUS_HEATERS_Y, 3, STATUS_HEATERS_HEIGHT);
+        if (tall) {
+          const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall;
+          if (PAGE_OVER(STATUS_HEATERS_Y + ph))
+            u8g.drawVLine(bx + 1, STATUS_HEATERS_Y + ph, tall);
+        }
+      }
+
+    #endif
+
+  } // PAGE_CONTAINS
+
+  if (PAGE_UNDER(7)) {
+    #if HEATER_IDLE_HANDLER
+      const bool is_idle = IFBED(thermalManager.is_bed_idle(), thermalManager.is_heater_idle(heater)),
+                 dodraw = (blink || !is_idle);
+    #else
+      constexpr bool dodraw = true;
+    #endif
+    if (dodraw) _draw_centered_temp(target + 0.5, tx, 7);
+  }
+
+  if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
+    _draw_centered_temp(temp + 0.5f, tx, 28);
+
+  if (IFBED(STATIC_BED && BED_DOT, STATIC_HOTEND && HOTEND_DOT) && PAGE_CONTAINS(17, 19)) {
+    u8g.setColorIndex(0); // set to white on black
+    u8g.drawBox(tx, IFBED(20-2, 20-3), 2, 2);
+    u8g.setColorIndex(1); // restore black on white
   }
 
 }
@@ -158,94 +222,8 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const
   }
 }
 
-void MarlinUI::draw_status_message(const bool blink) {
-
-  // Get the UTF8 character count of the string
-  uint8_t slen = utf8_strlen(status_message);
-
-  #if ENABLED(STATUS_MESSAGE_SCROLLING)
-
-    static bool last_blink = false;
-
-    if (slen <= LCD_WIDTH) {
-      // The string fits within the line. Print with no scrolling
-      lcd_put_u8str(status_message);
-      for (; slen < LCD_WIDTH; ++slen) lcd_put_wchar(' ');
-    }
-    else {
-      // String is longer than the available space
-
-      // Get a pointer to the next valid UTF8 character
-      const char *stat = status_message + status_scroll_offset;
-
-      // Get the string remaining length
-      const uint8_t rlen = utf8_strlen(stat);
-
-      if (rlen >= LCD_WIDTH) {
-        // The remaining string fills the screen - Print it
-        lcd_put_u8str_max(stat, LCD_PIXEL_WIDTH);
-      }
-      else {
-        // The remaining string does not completely fill the screen
-        lcd_put_u8str_max(stat, LCD_PIXEL_WIDTH);         // The string leaves space
-        uint8_t chars = LCD_WIDTH - rlen;                 // Amount of space left in characters
-
-        lcd_put_wchar('.');                               // Always at 1+ spaces left, draw a dot
-        if (--chars) {                                    // Draw a second dot if there's space
-          lcd_put_wchar('.');
-          if (--chars) {
-            // Print a second copy of the message
-            lcd_put_u8str_max(status_message, LCD_PIXEL_WIDTH - (rlen + 2) * (MENU_FONT_WIDTH));
-          }
-        }
-      }
-      if (last_blink != blink) {
-        last_blink = blink;
-
-        // Adjust by complete UTF8 characters
-        if (status_scroll_offset < slen) {
-          status_scroll_offset++;
-          while (!START_OF_UTF8_CHAR(status_message[status_scroll_offset]))
-            status_scroll_offset++;
-        }
-        else
-          status_scroll_offset = 0;
-      }
-    }
-
-  #else // !STATUS_MESSAGE_SCROLLING
-
-    UNUSED(blink);
-
-    // Just print the string to the LCD
-    lcd_put_u8str_max(status_message, LCD_PIXEL_WIDTH);
-
-    // Fill the rest with spaces
-    for (; slen < LCD_WIDTH; ++slen) lcd_put_wchar(' ');
-
-  #endif // !STATUS_MESSAGE_SCROLLING
-}
-
 void MarlinUI::draw_status_screen() {
 
-  #define DO_DRAW_BED (HAS_HEATED_BED && STATUS_BED_WIDTH)
-  #define DO_DRAW_FAN (HAS_FAN0 && STATUS_FAN_WIDTH && STATUS_FAN_FRAMES)
-  #define ANIM_END (HOTENDS && defined(STATUS_HOTEND_ANIM))
-  #define ANIM_BED (DO_DRAW_BED && defined(STATUS_BED_ANIM))
-  #if ANIM_END || ANIM_BED
-    static uint8_t heat_bits;
-  #endif
-  #if ANIM_END
-    #define HOTEND_ALT(N) TEST(heat_bits, N)
-  #else
-    #define HOTEND_ALT(N) false
-  #endif
-  #if ANIM_BED
-    #define BED_ALT TEST(heat_bits, 7)
-  #else
-    #define BED_ALT false
-  #endif
-
   static char xstring[5], ystring[5], zstring[8];
   #if ENABLED(FILAMENT_LCD_DISPLAY)
     static char wstring[5], mstring[4];
@@ -253,14 +231,15 @@ void MarlinUI::draw_status_screen() {
 
   // At the first page, generate new display values
   if (first_page) {
-    #if ANIM_END || ANIM_BED
+    #if ANIM_HOTEND || ANIM_BED
-      heat_bits = 0;
+      uint8_t new_bits = 0;
-      #if ANIM_END
+      #if ANIM_HOTEND
-        HOTEND_LOOP() if (thermalManager.isHeatingHotend(e) ^ SHOW_ON_STATE) SBI(heat_bits, e);
+        HOTEND_LOOP() if (thermalManager.isHeatingHotend(e)) SBI(new_bits, e);
       #endif
       #if ANIM_BED
-        if (thermalManager.isHeatingBed() ^ SHOW_ON_STATE) SBI(heat_bits, 7);
+        if (thermalManager.isHeatingBed()) SBI(new_bits, 7);
       #endif
+      heat_bits = new_bits;
     #endif
     strcpy(xstring, ftostr4sign(LOGICAL_X_POSITION(current_position[X_AXIS])));
     strcpy(ystring, ftostr4sign(LOGICAL_Y_POSITION(current_position[Y_AXIS])));
@@ -283,65 +262,13 @@ void MarlinUI::draw_status_screen() {
 
   #if STATUS_LOGO_WIDTH
     if (PAGE_CONTAINS(STATUS_LOGO_Y, STATUS_LOGO_Y + STATUS_LOGO_HEIGHT - 1))
-      u8g.drawBitmapP(
+      u8g.drawBitmapP(STATUS_LOGO_X, STATUS_LOGO_Y, STATUS_LOGO_BYTEWIDTH, STATUS_LOGO_HEIGHT, status_logo_bmp);
-        STATUS_LOGO_X, STATUS_LOGO_Y,
-        STATUS_LOGO_BYTEWIDTH, STATUS_LOGO_HEIGHT,
-        status_logo_bmp
-      );
   #endif
 
-  #if STATUS_HEATERS_WIDTH || STATUS_HOTEND1_WIDTH
+  #if STATUS_HEATERS_WIDTH
-
+    // Draw all heaters (and maybe the bed) in one go
-    if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_Y + STATUS_HEATERS_HEIGHT - 1)) {
+    if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_Y + STATUS_HEATERS_HEIGHT - 1))
-
+      u8g.drawBitmapP(STATUS_HEATERS_X, STATUS_HEATERS_Y, STATUS_HEATERS_BYTEWIDTH, STATUS_HEATERS_HEIGHT, status_heaters_bmp);
-      #if STATUS_HEATERS_WIDTH
-
-        // Draw all heaters (and maybe the bed) in one go
-        u8g.drawBitmapP(
-          STATUS_HEATERS_X, STATUS_HEATERS_Y,
-          STATUS_HEATERS_BYTEWIDTH, STATUS_HEATERS_HEIGHT,
-          status_heaters_bmp
-        );
-
-      #else
-
-        #if ANIM_END && defined(STATUS_HOTEND_INVERTED)
-          #define OFF_BMP(N) status_hotend##N##_b_bmp
-          #define ON_BMP(N)  status_hotend##N##_a_bmp
-        #else
-          #define OFF_BMP(N) status_hotend##N##_a_bmp
-          #define ON_BMP(N)  status_hotend##N##_b_bmp
-        #endif
-
-        #if STATUS_HOTEND_BITMAPS > 1
-          static const unsigned char* const status_hotend_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, OFF_BMP(1), OFF_BMP(2), OFF_BMP(3), OFF_BMP(4), OFF_BMP(5), OFF_BMP(6));
-          #if ANIM_END
-            static const unsigned char* const status_hotend_on_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, ON_BMP(1), ON_BMP(2), ON_BMP(3), ON_BMP(4), ON_BMP(5), ON_BMP(6));
-            #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr((S) ? &status_hotend_on_gfx[(N) % (STATUS_HOTEND_BITMAPS)] : &status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)])
-          #else
-            #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr(&status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)])
-          #endif
-        #elif ANIM_END
-          #define HOTEND_BITMAP(N,S) ((S) ? ON_BMP() : OFF_BMP())
-        #else
-          #define HOTEND_BITMAP(N,S) status_hotend_a_bmp
-        #endif
-
-        #define MAX_HOTEND_DRAW MIN(HOTENDS, ((128 - (STATUS_LOGO_BYTEWIDTH + STATUS_FAN_BYTEWIDTH) * 8) / (STATUS_HEATERS_XSPACE)))
-
-        // Draw hotends from one or more individual hotend bitmaps
-        for (uint8_t h = 0; h < MAX_HOTEND_DRAW; ++h) {
-          u8g.drawBitmapP(
-            STATUS_HOTEND_X(h), STATUS_HEATERS_Y,
-            STATUS_HOTEND_BYTEWIDTH(h), STATUS_HEATERS_HEIGHT,
-            HOTEND_BITMAP(h, HOTEND_ALT(h))
-          );
-        }
-
-      #endif
-
-    } // PAGE_CONTAINS
-
   #endif
 
   #if DO_DRAW_BED
@@ -350,14 +277,9 @@ void MarlinUI::draw_status_screen() {
     #else
       #define BED_BITMAP(S) status_bed_bmp
     #endif
-    const uint8_t bedy = STATUS_BED_Y(BED_ALT), bedh = STATUS_BED_HEIGHT(BED_ALT);
+    const uint8_t bedy = STATUS_BED_Y(BED_ALT()), bedh = STATUS_BED_HEIGHT(BED_ALT());
-    if (PAGE_CONTAINS(bedy, bedy + bedh - 1)) {
+    if (PAGE_CONTAINS(bedy, bedy + bedh - 1))
-      u8g.drawBitmapP(
+      u8g.drawBitmapP(STATUS_BED_X, bedy, STATUS_BED_BYTEWIDTH, bedh, BED_BITMAP(BED_ALT()));
-        STATUS_BED_X, bedy,
-        STATUS_BED_BYTEWIDTH, bedh,
-        BED_BITMAP(BED_ALT)
-      );
-    }
   #endif
 
   #if DO_DRAW_FAN
@@ -390,13 +312,14 @@ void MarlinUI::draw_status_screen() {
   // Temperature Graphics and Info
   //
 
-  if (PAGE_UNDER(28)) {
+  if (PAGE_UNDER(6 + 1 + 12 + 1 + 6 + 1)) {
     // Extruders
-    HOTEND_LOOP() _draw_heater_status(STATUS_HOTEND_TEXT_X(e), e, blink);
+    for (uint8_t e = 0; e < MAX_HOTEND_DRAW; ++e)
+      _draw_heater_status(e, blink);
 
     // Heated bed
-    #if HOTENDS < 4 && HAS_HEATED_BED
+    #if HAS_HEATED_BED && HOTENDS < 4
-      _draw_heater_status(STATUS_BED_TEXT_X, -1, blink);
+      _draw_heater_status(-1, blink);
     #endif
 
     // Fan, if a bitmap was provided
@@ -435,11 +358,8 @@ void MarlinUI::draw_status_screen() {
     #define PROGRESS_BAR_X 54
     #define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X)
 
-    if (PAGE_CONTAINS(49, 52))       // 49-52 (or 49-51)
+    if (PAGE_CONTAINS(49, 52))
-      u8g.drawFrame(
+      u8g.drawFrame(PROGRESS_BAR_X, 49, PROGRESS_BAR_WIDTH, 4);
-        PROGRESS_BAR_X, 49,
-        PROGRESS_BAR_WIDTH, 4
-      );
 
     const uint8_t progress = get_progress();
 
@@ -601,4 +521,72 @@ void MarlinUI::draw_status_screen() {
   }
 }
 
+void MarlinUI::draw_status_message(const bool blink) {
+
+  // Get the UTF8 character count of the string
+  uint8_t slen = utf8_strlen(status_message);
+
+  #if ENABLED(STATUS_MESSAGE_SCROLLING)
+
+    static bool last_blink = false;
+
+    if (slen <= LCD_WIDTH) {
+      // The string fits within the line. Print with no scrolling
+      lcd_put_u8str(status_message);
+      for (; slen < LCD_WIDTH; ++slen) lcd_put_wchar(' ');
+    }
+    else {
+      // String is longer than the available space
+
+      // Get a pointer to the next valid UTF8 character
+      const char *stat = status_message + status_scroll_offset;
+
+      // Get the string remaining length
+      const uint8_t rlen = utf8_strlen(stat);
+
+      if (rlen >= LCD_WIDTH) {
+        // The remaining string fills the screen - Print it
+        lcd_put_u8str_max(stat, LCD_PIXEL_WIDTH);
+      }
+      else {
+        // The remaining string does not completely fill the screen
+        lcd_put_u8str_max(stat, LCD_PIXEL_WIDTH);         // The string leaves space
+        uint8_t chars = LCD_WIDTH - rlen;                 // Amount of space left in characters
+
+        lcd_put_wchar('.');                               // Always at 1+ spaces left, draw a dot
+        if (--chars) {                                    // Draw a second dot if there's space
+          lcd_put_wchar('.');
+          if (--chars) {
+            // Print a second copy of the message
+            lcd_put_u8str_max(status_message, LCD_PIXEL_WIDTH - (rlen + 2) * (MENU_FONT_WIDTH));
+          }
+        }
+      }
+      if (last_blink != blink) {
+        last_blink = blink;
+
+        // Adjust by complete UTF8 characters
+        if (status_scroll_offset < slen) {
+          status_scroll_offset++;
+          while (!START_OF_UTF8_CHAR(status_message[status_scroll_offset]))
+            status_scroll_offset++;
+        }
+        else
+          status_scroll_offset = 0;
+      }
+    }
+
+  #else // !STATUS_MESSAGE_SCROLLING
+
+    UNUSED(blink);
+
+    // Just print the string to the LCD
+    lcd_put_u8str_max(status_message, LCD_PIXEL_WIDTH);
+
+    // Fill the rest with spaces
+    for (; slen < LCD_WIDTH; ++slen) lcd_put_wchar(' ');
+
+  #endif // !STATUS_MESSAGE_SCROLLING
+}
+
 #endif // HAS_GRAPHICAL_LCD && !LIGHTWEIGHT_UI

Marlin/src/lcd/dogm/ultralcd_DOGM.h

@@ -133,8 +133,9 @@
 #endif
 
 // For selective rendering within a Y range
-#define PAGE_UNDER(yb) (u8g.getU8g()->current_page.y0 <= (yb))
+#define PAGE_OVER(ya)         ((ya) <= u8g.getU8g()->current_page.y1) // Does the current page follow a region top?
-#define PAGE_CONTAINS(ya, yb) (PAGE_UNDER(yb) && u8g.getU8g()->current_page.y1 >= (ya))
+#define PAGE_UNDER(yb)        ((yb) >= u8g.getU8g()->current_page.y0) // Does the current page precede a region bottom?
+#define PAGE_CONTAINS(ya, yb) ((yb) >= u8g.getU8g()->current_page.y0 && (ya) <= u8g.getU8g()->current_page.y1) // Do two vertical regions overlap?
 
 // Only Western languages support big / small fonts
 #if DISABLED(DISPLAY_CHARSET_ISO10646_1)

Marlin/src/lcd/ultralcd.cpp

@@ -257,6 +257,12 @@ void MarlinUI::init() {
   #if HAS_ENCODER_ACTION
     encoderDiff = 0;
   #endif
+
+  #if ENABLED(MARLIN_DEV_MODE)
+    // Start timer 5 at full speed
+    SET_CS(5, PRESCALER_1);
+    SET_COM(5, A, NORMAL);
+  #endif
 }
 
 bool MarlinUI::get_blink() {