Extra insurance against endstop false positives (#11013)

Marlin/src/module/endstops.cpp

@@ -265,7 +265,7 @@ void Endstops::not_homing() {
 
 // Enable / disable endstop z-probe checking
 #if HAS_BED_PROBE
-  void Endstops::enable_z_probe(bool onoff) {
+  void Endstops::enable_z_probe(const bool onoff) {
     z_probe_enabled = onoff;
 
     #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
@@ -439,7 +439,7 @@ void Endstops::update() {
   if (stepper.axis_is_moving(X_AXIS)) {
     if (stepper.motor_direction(X_AXIS_HEAD)) { // -direction
       #if HAS_X_MIN
-        #if ENABLED(X_DUAL_ENDSTOPS)
+        #if ENABLED(X_DUAL_ENDSTOPS) && X_HOME_DIR < 0
           UPDATE_ENDSTOP_BIT(X, MIN);
           #if HAS_X2_MIN
             UPDATE_ENDSTOP_BIT(X2, MIN);
@@ -453,7 +453,7 @@ void Endstops::update() {
     }
     else { // +direction
       #if HAS_X_MAX
-        #if ENABLED(X_DUAL_ENDSTOPS)
+        #if ENABLED(X_DUAL_ENDSTOPS) && X_HOME_DIR > 0
           UPDATE_ENDSTOP_BIT(X, MAX);
           #if HAS_X2_MAX
             UPDATE_ENDSTOP_BIT(X2, MAX);
@@ -469,7 +469,7 @@ void Endstops::update() {
 
   if (stepper.axis_is_moving(Y_AXIS)) {
     if (stepper.motor_direction(Y_AXIS_HEAD)) { // -direction
-      #if HAS_Y_MIN
+      #if HAS_Y_MIN && Y_HOME_DIR < 0
         #if ENABLED(Y_DUAL_ENDSTOPS)
           UPDATE_ENDSTOP_BIT(Y, MIN);
           #if HAS_Y2_MIN
@@ -483,7 +483,7 @@ void Endstops::update() {
       #endif
     }
     else { // +direction
-      #if HAS_Y_MAX
+      #if HAS_Y_MAX && Y_HOME_DIR > 0
         #if ENABLED(Y_DUAL_ENDSTOPS)
           UPDATE_ENDSTOP_BIT(Y, MAX);
           #if HAS_Y2_MAX
@@ -501,21 +501,19 @@ void Endstops::update() {
   if (stepper.axis_is_moving(Z_AXIS)) {
     if (stepper.motor_direction(Z_AXIS_HEAD)) { // Z -direction. Gantry down, bed up.
       #if HAS_Z_MIN
-        #if ENABLED(Z_DUAL_ENDSTOPS)
+        #if ENABLED(Z_DUAL_ENDSTOPS) && Z_HOME_DIR < 0
           UPDATE_ENDSTOP_BIT(Z, MIN);
           #if HAS_Z2_MIN
             UPDATE_ENDSTOP_BIT(Z2, MIN);
           #else
             COPY_BIT(live_state, Z_MIN, Z2_MIN);
           #endif
-        #else
+        #elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
-          #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
           if (z_probe_enabled) UPDATE_ENDSTOP_BIT(Z, MIN);
-          #else
+        #elif Z_HOME_DIR < 0
           UPDATE_ENDSTOP_BIT(Z, MIN);
         #endif
       #endif
-      #endif
 
       // When closing the gap check the enabled probe
       #if ENABLED(Z_MIN_PROBE_ENDSTOP)
@@ -523,7 +521,7 @@ void Endstops::update() {
       #endif
     }
     else { // Z +direction. Gantry up, bed down.
-      #if HAS_Z_MAX
+      #if HAS_Z_MAX && Z_HOME_DIR > 0
         // Check both Z dual endstops
         #if ENABLED(Z_DUAL_ENDSTOPS)
           UPDATE_ENDSTOP_BIT(Z, MAX);
@@ -532,9 +530,8 @@ void Endstops::update() {
           #else
             COPY_BIT(live_state, Z_MAX, Z2_MAX);
           #endif
-        // If this pin is not hijacked for the bed probe
-        // then it belongs to the Z endstop
         #elif DISABLED(Z_MIN_PROBE_ENDSTOP) || Z_MAX_PIN != Z_MIN_PROBE_PIN
+          // If this pin isn't the bed probe it's the Z endstop
           UPDATE_ENDSTOP_BIT(Z, MAX);
         #endif
       #endif

Marlin/src/module/endstops.h

@@ -143,7 +143,7 @@ class Endstops {
     // Enable / disable endstop z-probe checking
     #if HAS_BED_PROBE
       static volatile bool z_probe_enabled;
-      static void enable_z_probe(bool onoff=true);
+      static void enable_z_probe(const bool onoff=true);
     #endif
 
     // Debugging of endstops