microlab
/
scube
1
1
Fork 0
Code Issues Pull Requests Releases Activity

Update and fix CHDK

Browse Source
2.0.x
Scott Lahteine 6 years ago
parent fed84f2961
commit 498dfa291e
63 changed files with 548 additions and 137 deletions
Show Stats Download Patch File Download Diff File

18
Marlin/Configuration_adv.h
Unescape Escape View File

@ -562,12 +562,9 @@
//=============================Additional Features===========================
//===========================================================================
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
#define ENCODER_10X_STEPS_PER_SEC 30 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 80 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
// @section lcd
@ -1498,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

16
Marlin/src/Marlin.cpp
Unescape Escape View File

@ -191,9 +191,9 @@ volatile bool wait_for_heatup = true;
millis_t max_inactive_time, // = 0
stepper_inactive_time = (DEFAULT_STEPPER_DEACTIVE_TIME) * 1000UL;
#ifdef CHDK
millis_t chdkHigh; // = 0;
bool chdkActive; // = false;
#if PIN_EXISTS(CHDK)
extern bool chdk_active;
extern millis_t chdk_timeout;
#endif
#if ENABLED(I2C_POSITION_ENCODERS)
@ -323,7 +323,7 @@ void disable_all_steppers() {
* - Keep the command buffer full
* - Check for maximum inactive time between commands
* - Check for maximum inactive time between stepper commands
* - Check if pin CHDK needs to go LOW
* - Check if CHDK_PIN needs to go LOW
* - Check for KILL button held down
* - Check for HOME button held down
* - Check if cooling fan needs to be switched on
@ -374,10 +374,10 @@ void manage_inactivity(const bool ignore_stepper_queue/*=false*/) {
}
}
#ifdef CHDK // Check if pin should be set to LOW after M240 set it to HIGH
if (chdkActive && ELAPSED(ms, chdkHigh + CHDK_DELAY)) {
chdkActive = false;
WRITE(CHDK, LOW);
#if PIN_EXISTS(CHDK) // Check if pin should be set to LOW (after M240 set it HIGH)
if (chdk_active && ELAPSED(ms, chdk_timeout)) {
chdk_active = false;
WRITE(CHDK_PIN, LOW);
}
#endif

11
Marlin/src/config/default/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1498,6 +1496,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Anet/A2/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
Unescape Escape View File

@ -565,8 +565,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1496,6 +1494,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/ArmEd/Configuration_adv.h
Unescape Escape View File

@ -538,8 +538,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1471,6 +1469,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
Unescape Escape View File

@ -565,8 +565,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1496,6 +1494,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
Unescape Escape View File

@ -574,8 +574,6 @@
#define ENCODER_10X_STEPS_PER_SEC 30 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 50 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1505,6 +1503,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Cartesio/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Einstart-S/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Felix/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1499,6 +1497,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
Unescape Escape View File

@ -570,8 +570,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1501,6 +1499,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
Unescape Escape View File

@ -571,8 +571,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1502,6 +1500,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1498,6 +1496,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/MakerParts/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 300 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
Unescape Escape View File

@ -567,8 +567,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1505,6 +1503,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/RigidBot/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
//#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
//#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/SCARA/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/TheBorg/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
Unescape Escape View File

@ -579,8 +579,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1510,6 +1508,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
Unescape Escape View File

@ -568,8 +568,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1499,6 +1497,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
Unescape Escape View File

@ -568,8 +568,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1499,6 +1497,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
Unescape Escape View File

@ -568,8 +568,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1499,6 +1497,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
Unescape Escape View File

@ -568,8 +568,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1499,6 +1497,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
Unescape Escape View File

@ -568,8 +568,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1499,6 +1497,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/delta/generic/Configuration_adv.h
Unescape Escape View File

@ -568,8 +568,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1499,6 +1497,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
Unescape Escape View File

@ -568,8 +568,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1499,6 +1497,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
Unescape Escape View File

@ -568,8 +568,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1499,6 +1497,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/makibox/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
Unescape Escape View File

@ -566,8 +566,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1497,6 +1495,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

11
Marlin/src/config/examples/wt150/Configuration_adv.h
Unescape Escape View File

@ -567,8 +567,6 @@
#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd
@ -1498,6 +1496,15 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
#endif
/**
* Spindle & Laser control
*

16
Marlin/src/gcode/feature/camera/M240.cpp
Unescape Escape View File

@ -22,20 +22,24 @@
#include "../../../inc/MarlinConfig.h"
#if defined(CHDK) || HAS_PHOTOGRAPH
#if PIN_EXISTS(CHDK) || HAS_PHOTOGRAPH
#include "../../gcode.h"
bool chdk_active; // = false
millis_t chdk_timeout;
/**
* M240: Trigger a camera by emulating a Canon RC-1
* See http://www.doc-diy.net/photo/rc-1_hacked/
*/
void GcodeSuite::M240() {
#ifdef CHDK
OUT_WRITE(CHDK, HIGH);
chdkHigh = millis();
chdkActive = true;
#if PIN_EXISTS(CHDK)
OUT_WRITE(CHDK_PIN, HIGH);
chdk_timeout = millis() + CHDK_DELAY;
chdk_active = true;
#elif HAS_PHOTOGRAPH
@ -58,4 +62,4 @@ void GcodeSuite::M240() {
#endif
}
#endif // CHDK || HAS_PHOTOGRAPH
#endif // CHDK_PIN || HAS_PHOTOGRAPH

2
Marlin/src/gcode/gcode.cpp
Unescape Escape View File

@ -522,7 +522,7 @@ void GcodeSuite::process_parsed_command(
case 304: M304(); break; // M304: Set bed PID parameters
#endif
#if defined(CHDK) || HAS_PHOTOGRAPH
#if PIN_EXISTS(CHDK) || HAS_PHOTOGRAPH
case 240: M240(); break; // M240: Trigger a camera by emulating a Canon RC-1 : http://www.doc-diy.net/photo/rc-1_hacked/
#endif

4
Marlin/src/gcode/gcode.h
Unescape Escape View File

@ -171,7 +171,7 @@
* M220 - Set Feedrate Percentage: "M220 S<percent>" (i.e., "FR" on the LCD)
* M221 - Set Flow Percentage: "M221 S<percent>"
* M226 - Wait until a pin is in a given state: "M226 P<pin> S<state>"
* M240 - Trigger a camera to take a photograph. (Requires CHDK or PHOTOGRAPH_PIN)
* M240 - Trigger a camera to take a photograph. (Requires CHDK_PIN or PHOTOGRAPH_PIN)
* M250 - Set LCD contrast: "M250 C<contrast>" (0-63). (Requires LCD support)
* M260 - i2c Send Data (Requires EXPERIMENTAL_I2CBUS)
* M261 - i2c Request Data (Requires EXPERIMENTAL_I2CBUS)
@ -631,7 +631,7 @@ private:
static void M221();
static void M226();
#if defined(CHDK) || HAS_PHOTOGRAPH
#if PIN_EXISTS(CHDK) || HAS_PHOTOGRAPH
static void M240();
#endif

2
Marlin/src/inc/SanityCheck.h
Unescape Escape View File

@ -321,6 +321,8 @@
#error "G0_FEEDRATE is now used to set the G0 feedrate. Please update your configuration."
#elif defined(MBL_Z_STEP)
#error "MBL_Z_STEP is now MESH_EDIT_Z_STEP. Please update your configuration."
#elif defined(CHDK)
#error "CHDK is now CHDK_PIN. Please update your Configuration_adv.h."
#endif
#define BOARD_MKS_13 -47

Write Preview
Loading…
Cancel
Save